The touch-overlay feature adds support for segments (touch areas) on the
touchscreen surface that represent overlays with clipped touchscreen
areas and printed buttons.
Add nodes for a clipped touchscreen and overlay buttons to the existing
example.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20241016-feature-ts_virtobj_patch-v11-3-b292a1bbb0a1@wolfvision.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The touch-overlay encompasses a number of touch areas that define a
clipped touchscreen area and/or buttons with a specific functionality.
A clipped touchscreen area avoids getting events from regions that are
physically hidden by overlay frames.
For touchscreens with printed overlay buttons, sub-nodes with a suitable
key code can be defined to report key events instead of the original
touch events.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20241016-feature-ts_virtobj_patch-v11-1-b292a1bbb0a1@wolfvision.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In some configurations the touch controller can support touch keys.
Document the linux,keycodes property that enables those keys and
specifies the keycodes that should be used to report the key events.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250707-rmi4_f1a-v1-1-838d83c72e7f@apitzsch.eu
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert tsc2007.txt to yaml format.
Additional changes:
- add pendown-gpio property to match existed dts.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250529193241.793678-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert lpc32xx-tsc.txt to yaml format.
Additional changes:
- add clocks and put it into required list to match existed lpc32xx.dtsi.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250625163431.2543597-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Elan eKTH8D18 touchscreen controller is an I2C HID device with a
longer boot-up time. Power sequence timing wise it is compatible with
the eKTH6A12NAY, with a power-on delay of at least 5ms, 20ms
out-of-reset for I2C ack response, and 150ms out-of-reset for I2C HID
enumeration, both shorter than what the eKTH6A12NAY requires.
Enumeration and subsequent operation follows the I2C HID standard.
Add a compatible string for it with the ekth6a12nay one as a fallback.
No enum was used as it is rare to actually add new entries. These
chips are commonly completely backward compatible, and unless the
power sequencing delays change, there is no real effort being made to
keep track of new parts, which come out constantly.
Also drop the constraints on the I2C address since it's not really
part of the binding.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250617082004.1653492-2-wenst@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmghHIMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQP4H/0nzYeRJaWdhar4B
tb3tOUyHpokhqNpWYA+fSxq83H1yTuxv3PoHDJg1OEXfmwmfKS8+UelkBZX+fl/q
gfUz9CdmgMfXyXHw3jQnDGx6IwBDT5z3GfKbmFyzft8vqMyfGSGYmfdSaR+MZrD6
WxxCyNgPWGkT41MgvHW8JAH8Hj+yyzpu7uqx3LIS2KA3dJcxZGJUYC3uA2UBIuGD
CmTuWaG6zY4uTtiAOXUscKyA9wCh7cawTLJKAtc6SEpzAbMmZ3nUiOAVoKf70R0t
EqH16aToV+th/zUvCuPKT3bWIkiNxDsibtwfW9fIJ8aZnQuvO/bK4ygHXjy8C/vc
PUaWMIA=
=evf8
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc6' into next
Sync up with mainline to bring in xpad controller changes.
Convert the Dialog Semiconductor DA7280 Low Power High-Definition
Haptic Driver bindings to dt-schema.
Due to the implementation and usage in DT the array must be
an uint32 array.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-misc-da7280-convert-v4-1-2972c4e81cb5@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In Xiaomi Poco F1 (qcom/sdm845-xiaomi-beryllium-ebbg.dts), the FocalTech
FT8719 touchscreen is integrally connected to the display panel
(EBBG FT8719) and thus should be power sequenced together with display
panel using the panel property. Since the edt-ft5x06 touchscreen binding
uses almost all the properties present in touchscreen.yaml, let's remove
additionalProperties: false and use unevaluatedProperties to include all
the properties, including the needed panel property.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <foss@joelselvaraj.com>
Link: https://lore.kernel.org/r/20250506-pocof1-touchscreen-support-v4-1-bfb53da52945@joelselvaraj.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Document the Goodix GT9897 which is a Berlin-A series touchscreen
controller IC by Goodix.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250309062315.35720-2-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The property is implemented in the driver but not described in dt-bindings.
Add missing property 'gpio-activelow' to DT schema.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Link: https://lore.kernel.org/r/20250226152843.43932-3-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' into next
Sync up with the mainline.
Matrix keypads with high capacity need a longer settle time after
enabling all columns. Add an optional property to specify the settle
time.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-6-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert the gpio-matrix-keypad bindings from text to DT schema.
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Manuel Traut <manuel.traut@mt.com>
Link: https://lore.kernel.org/r/20250110054906.354296-4-markus.burri@mt.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250107125844.226466-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
IST3038H is a touchscreen IC which seems mostly compatible with IST3038C
except that it reports a different chip ID value.
Signed-off-by: Andras Sebok <sebokandris2009@gmail.com>
Link: https://lore.kernel.org/r/20250224090354.102903-4-sebokandris2009@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add bindings for touchscreen controllers attached using the Z2 protocol.
Those are present in most Apple devices.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250217-z2-v6-1-c2115d6e5a8f@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power Domain
Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom QCS8300
remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and NXP iMX35
GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out some
x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling
-----BEGIN PGP SIGNATURE-----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=3bID
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power
Domain Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom
QCS8300 remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and
NXP iMX35 GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the
kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out
some x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling"
* tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
of: address: Fix empty resource handling in __of_address_resource_bounds()
of/fdt: Restore possibility to use both ACPI and FDT from bootloader
docs: dt-bindings: Document preferred line wrapping
dt-bindings: ufs: Correct indentation and style in DTS example
of: Correct element count for two arrays in API of_parse_phandle_with_args_map()
of: reserved-memory: Warn for missing static reserved memory regions
of: Do not expose of_alias_scan() and correct its comments
dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindings
dt-bindings: arm: coresight: Update the pattern of ete node name
of: Warn when of_property_read_bool() is used on non-boolean properties
device property: Split property reading bool and presence test ops
of/fdt: Check fdt_get_mem_rsv() error in early_init_fdt_scan_reserved_mem()
of: reserved-memory: Move an assignment to effective place in __reserved_mem_alloc_size()
of: reserved-memory: Do not make kmemleak ignore freed address
of: reserved-memory: Fix using wrong number of cells to get property 'alignment'
of: Remove a duplicated code block
of: property: Avoiding using uninitialized variable @imaplen in parse_interrupt_map()
of: Correct child specifier used as input of the 2nd nexus node
dt-bindings: interrupt-controller: ti,omap4-wugen-mpu: Add file extension
...
Add compatibles for SoCs using this device (mt8183, mt8365, mt8516).
Signed-off-by: Val Packett <val@packett.cool>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241225192631.25017-2-val@packett.cool
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add compatible strings for the MT6328 PMIC.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018081050.23592-3-y.oudjana@protonmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove() method
(from remove_new())
- updates to a number of input drivers to use the new cleanup facilities
(__free(...), guard(), and scoped-guard()) which ensure that the
resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ0PQIAAKCRBAj56VGEWX
nDFFAQCSj3Va9Y6ZgNFvjmPAoA3RmsrvydXMG6PuyHEEfvTtpgD9GPldve3MRqRr
VcrLJXMgyX2+RgpKm1W9ZQgK9Nudegs=
=Ry7d
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove()
method (from remove_new())
- updates to a number of input drivers to use the new cleanup
facilities (__free(...), guard(), and scoped-guard()) which ensure
that the resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
Input: mpr121 - use devm_regulator_get_enable_read_voltage()
Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
Input: spear-keyboard - don't include 'pm_wakeup.h' directly
Input: cypress-sf - constify struct i2c_device_id
Input: ads7846 - increase xfer array size in 'struct ser_req'
Input: fix the input_event struct documentation
Input: i8042 - fix typo dublicate to duplicate
Input: ads7846 - add dummy command register clearing cycle
Input: cs40l50 - fix wrong usage of INIT_WORK()
Input: introduce notion of passive observers for input handlers
Input: maple_keyb - use guard notation when acquiring mutex
Input: locomokbd - use guard notation when acquiring spinlock
Input: hilkbd - use guard notation when acquiring spinlock
Input: synaptics-rmi4 - switch to using cleanup functions in F34
Input: synaptics - fix a typo
dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
Input: omap-keypad - use guard notation when acquiring mutex
Input: imagis - fix warning regarding 'imagis_3038_data' being unused
Input: userio - remove unneeded semicolon
Input: sparcspkr - use cleanup facility for device_node
...
tps65010, have undergone minor code improvements to enhance consistency and
fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0 capability
for consistent register map configuration across syscons of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced regulator
put and ensure proper synchronization during driver removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant improvements,
including the use of IRQ domains for various devices, fixing IRQ domain names
duplication, and code refactoring for better consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break statement in
the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver, along
with ensuring a clear relationship between IDs and model names, and allowing
multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved power
management.
- The adp5585 driver has reduced its dependencies by dropping the obsolete
dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397 driver,
expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name from
IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing regmap_del_irq_chip()
in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML format
for better readability and maintainability.
-----BEGIN PGP SIGNATURE-----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=YP3r
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance
consistency and fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0
capability for consistent register map configuration across syscons
of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device
compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced
regulator put and ensure proper synchronization during driver
removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant
improvements, including the use of IRQ domains for various devices,
fixing IRQ domain names duplication, and code refactoring for better
consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break
statement in the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver,
along with ensuring a clear relationship between IDs and model names,
and allowing multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved
power management.
- The adp5585 driver has reduced its dependencies by dropping the
obsolete dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397
driver, expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name
from IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing
regmap_del_irq_chip() in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated
i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML
format for better readability and maintainability.
* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
dt-bindings: mfd: sprd,sc2731: Convert to YAML
mfd: tqmx86: Add I2C IRQ support
mfd: tqmx86: Make IRQ setup errors non-fatal
mfd: tqmx86: Refactor GPIO IRQ setup
mfd: tqmx86: Improve gpio_irq module parameter description
mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
mfd: 88pm886: Add the RTC cell
dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
mfd: intel_soc_pmic_*: Consistently use filename as driver name
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
mfd: rt5033: Fix missing regmap_del_irq_chip()
mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
dt-bindings: mfd: aspeed: Support for AST2700
mfd: Switch back to struct platform_driver::remove()
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
mfd: rtc: bd7xxxx Drop IC name from IRQ
mfd: mt6397: Add initial support for MT6328
mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=J6g1
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- improvement in the way hid-bpf coexists with specific drivers (others
than hid-generic) that are already bound to devices (Benjamin
Tissoires)
- removal of three way-too-aggressive BUG_ON()s from HID drivers (He
Lugang)
- assorted cleanups and small code fixes to HID core (Dmitry Torokhov,
Yan Zhen, Nathan Chancellor, Andy Shevchenko)
- support for Corsair Void headset family (Stuart Hayhurst)
- Support for Goodix GT7986U SPI (Charles Wang)
- initial vendor-specific driver for Kysona, currently adding support
for Kysona M600 (Lode Willems)
- other assorted code cleanups and small bugfixes all over the place
* tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (40 commits)
HID: multitouch: make mt_set_mode() less cryptic
HID: hid-goodix-spi: Add OF supports
dt-bindings: input: Goodix GT7986U SPI HID Touchscreen
HID: hyperv: streamline driver probe to avoid devres issues
HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support
HID: rmi: Add select RMI4_F3A in Kconfig
HID: wacom: Interpret tilt data from Intuos Pro BT as signed values
HID: steelseries: Add capacity_level mapping
HID: steelseries: Fix battery requests stopping after some time
HID: hid-goodix: Fix HID get/set feature operation overwritten problem
HID: hid-goodix: Return 0 when receiving an empty HID feature package
HID: bpf: drop use of Logical|Physical|UsageRange
HID: bpf: Fix Rapoo M50 Plus Silent side buttons
HID: bpf: Fix NKRO on Mistel MD770
HID: replace BUG_ON() with WARN_ON()
HID: wacom: Set eraser status when either 'Eraser' or 'Invert' usage is set
HID: Kysona: add basic online status
HID: Kysona: check battery status every 5s using a workqueue
HID: Kysona: Add basic battery reporting for Kysona M600
HID: Add IDs for Kysona
...
The Goodix GT7986U touch controller report touch data according to the
HID protocol through the SPI bus. However, it is incompatible with
Microsoft's HID-over-SPI protocol.
NOTE: these bindings are distinct from the bindings used with the
GT7986U when the chip is running I2C firmware. For some background,
see discussion on the mailing lists in the thread:
https://lore.kernel.org/r/20241018020815.3098263-2-charles.goodix@gmail.com
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The user and driver both indicate this property is a boolean, not int32.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20241101211304.20886-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert device tree binding doc zii,rave-sp-pwrbutton.txt to yaml format.
Additional changes:
- add ref to input.yaml.
- remove mfd node in example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241010-zii_yaml-v2-1-0ab730607422@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add a compatible for the keys found on the MT6359 PMIC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20241008074137.20269-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert the mfd: mediatek: mt6397 binding to DT schema format.
MT6323, MT6358, and MT6397 are PMIC devices with multiple function
subdevices. They share a common PMIC design but have variations in
subdevice combinations.
Key updates in this conversion:
1. RTC:
- Convert rtc-mt6397.txt and merge into parent MT6397 PMIC DT schema.
2. Regulators:
- Align to generic name "regulators".
- Update references from .txt to .yaml for mt6323, mt6358, and mt6397
regulators.
- Simplify regulator name labels in device tree examples.
3. Audio Codec:
- Simplify Audio Codec part with updating compatible items.
- Align to generic name "audio-codec" for codec and sound subdevices.
4. Clocks:
- Align to generic name "clocks" for clockbuffer subdevices.
5. LEDs:
- Convert leds-mt6323.txt and merge into parent MT6397 PMIC DT schema.
- Update LED binding.
6. Keys:
- Add detailed descriptions for power and home keys.
- Add compatible: mediatek,mt6358-keys.
7. Power Controller:
- Convert mt6323-poweroff.txt and merge into parent MT6397 PMIC DT
schema.
- Add #power-domain-cells property to fix dt-binding check error.
- Clarify "BBPU" as "Baseband power up".
8. Pinctrl:
- Align to generic name "pinctrl" instead of "pin-controller".
9. Compatible:
- Drop "mediatek,mt6357" since there is a separated DT Schema
for PMIC MT6357.
10. Examples:
- MT6323: Retain complete examples for this PMIC.
- MT6358 and MT6397: simplify settings in regulators.
- Preserve "audio-codec", "clocks", "pinctrl", "rtc", and "keys"
sections as they contain typical settings for different PMICs.
Additional updates:
- MAINTAINERS: Add co-maintainers and reference to
mfd/mediatek,mt6397.yaml for LED and power-controller drivers.
- input/mediatek,pmic-keys.yaml: Update reference to
mfd/mediatek,mt6397.yaml.
Signed-off-by: Sen Chu <sen.chu@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241001104145.24054-3-macpaul.lin@mediatek.com
Signed-off-by: Lee Jones <lee@kernel.org>
Document the Novatek NVT touchscreen controller present in devices like
qcom/sdm845-xiaomi-beryllium-tianma.dts. Also, include the devictree
binding file in the MAINTAINERS file.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Link: https://lore.kernel.org/r/20240601-nvt-ts-devicetree-regulator-support-v5-2-aa9bf986347d@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=aSwK
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024092601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fix from Jiri Kosina:
"A revert of Device Tree binding for Goodix SPI HID driver (while
keeping ACPI still available), as it conflicted with already existing
binding and the original submitter didn't respond in time with a fix.
We will be looking into ways how to reintroduce it properly (we have
to agree on a way how to handle cases where vendor uses the very same
product ID for I2C and SPI parts, leading to this kind conflict). But
before that is settled, let's revert the to unbreak everybody else
(Krzysztof Kozlowski)"
* tag 'hid-for-linus-2024092601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
dt-bindings: input: Revert "dt-bindings: input: Goodix SPI HID Touchscreen"
HID: hid-goodix: drop unsupported and undocumented DT part
This reverts commit 9184b17fbc ("dt-bindings: input: Goodix SPI HID
Touchscreen") because it duplicates existing binding leadings to errors:
goodix,gt7986u.example.dtb:
touchscreen@0: compatible: 'oneOf' conditional failed, one must be fixed:
['goodix,gt7986u'] is too short
'goodix,gt7375p' was expected
This was reported on mailing list on 6th of September, but no reaction
happened from contributor or maintainer to fix it.
Therefore let's drop binding which breaks and duplicates existing one.
Fixes: 9184b17fbc ("dt-bindings: input: Goodix SPI HID Touchscreen")
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/CAL_Jsq+QfTtRj_JCqXzktQ49H8VUnztVuaBjvvkg3fwEHniUHw@mail.gmail.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch IC
registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup functions
to simplify releasing of resources (with more drivers to follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZvGnWgAKCRBAj56VGEWX
nDjGAQCHcRk1icJlyjx3KA85gdILriDB9zMNJnCnbYXrSfGbOQD+LZNjO3po26zB
wloLEYTKRu3E/oWEI8VcfIN2m89vxw4=
=bDsb
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=FMSD
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024091602' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- New HID over SPI driver for Goodix devices that don't follow
Microsoft's HID-over-SPI specification, so a separate driver is
needed. Currently supported device is GT7986U touchscreen (Charles
Wang)
- support for new hardware features in Wacom driver (high-res wheel
scrolling, touchstrings with relative motions, support for two
touchrings) (Jason Gerecke)
- support for customized vendor firmware loading in intel-ish driver
(Zhang Lixu)
- fix for theoretical race condition in i2c-hid (Dmitry Torokhov)
- support for HIDIOCREVOKE -- evdev's EVIOCREVOKE equivalent in hidraw
(Peter Hutterer)
- initial hidraw selftest implementation (Benjamin Tissoires)
- constification of device-specific report descriptors (Thomas
Weißschuh)
- other small assorted fixes and device ID / quirk additions
* tag 'hid-for-linus-2024091602' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (54 commits)
hid: cp2112: Use irq_get_trigger_type() helper
HID: i2c-hid: ensure various commands do not interfere with each other
HID: multitouch: Add support for Thinkpad X12 Gen 2 Kbd Portfolio
HID: wacom: Do not warn about dropped packets for first packet
HID: wacom: Support sequence numbers smaller than 16-bit
HID: lg: constify fixed up report descriptor
HID: uclogic: constify fixed up report descriptor
HID: waltop: constify fixed up report descriptor
HID: sony: constify fixed up report descriptor
HID: pxrc: constify fixed up report descriptor
HID: steelseries: constify fixed up report descriptor
HID: viewsonic: constify fixed up report descriptor
HID: vrc2: constify fixed up report descriptor
HID: xiaomi: constify fixed up report descriptor
HID: maltron: constify fixed up report descriptor
HID: keytouch: constify fixed up report descriptor
HID: holtek-kbd: constify fixed up report descriptor
HID: dr: constify fixed up report descriptor
HID: bigbenff: constify fixed up report descriptor
HID: picoLCD: Use backlight power constants
...
DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc, isil,isl69260,
ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled
-----BEGIN PGP SIGNATURE-----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=a3qP
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
Convert binding doc rotary-encoder.txt to yaml format.
Additional change:
- Only keep one example.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dtb: /rotary-encoder:
failed to match any schema with compatible: ['rotary-encoder']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240811214656.3773098-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The PM6150 vibrator module is compatible with the PMI632 vibrator
module, document the PM6150 vibrator compatible as fallback for the
PMI632 vibrator.
Signed-off-by: Jens Reidel <adrian@travitia.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240606181027.98537-2-adrian@travitia.xyz
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The Elan ekth6a12nay touch screen chip same as Elan eKTH6915 controller
has a reset gpio. The difference is that they have different
post_power_delay_ms.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Node names should be generic.
Improve the binding example by using 'touchscreen' as the node name.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240830194331.3774408-1-festevam@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Adding software support for enabling the pure gpio capability of the
device - which allows all I/O to be used as GPIO. Previously, I/O
configuration was limited by software to partial GPIO support only.
When working in a pure gpio mode, the device does not require the
certain properties and hence, the following are now made optional:
- interrupts
- keypad,num-rows
- keypad,num-columns
- linux,keymap
However, note that the above are required to be specified when
configuring the device as a keypad, for which dependencies have been added
such that specifying either one requires the remaining as well.
Also, note that interrupts are made optional, but required when the device
has either been configured in keypad mode or as an interrupt controller.
This has been done since they may not necessarily be used when leveraging
the device purely for GPIO.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Link: https://lore.kernel.org/r/20240826-adp5588_gpio_support-v11-3-3e5ac2bd31b7@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert binding doc ads7846.txt to yaml format.
Additional change:
- add ref to touchscreen.yaml and spi-peripheral-props.yaml.
- use common node name touchscreen.
- sort ti properties alphabetically.
- sort common properties alphabetically.
- sort compatible string alphabetically.
- remove vcc-supply from required list.
- deprecated ti,x-min, ti,y-min
Fix below warning: arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dtb: touchscreen@0:
ti,x-min: b'\x00}' is not of type 'object', 'array', 'boolean', 'null'
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240826162302.960732-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZsjxKQAKCRBAj56VGEWX
nKE9APwPOZl4TldhPLG37LCvlVmgN0cSSWY+PEEqIaxmFtezjQEAr2/qs1XknZVr
LkuhmHxng2ZI9X4HUL+h52Lha7y4UAc=
=3Pcb
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes
* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: himax_hx83112b - fix incorrect size when reading product ID
Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
Input: uinput - reject requests with unreasonable number of slots
Input: edt-ft5x06 - add support for FocalTech FT8201
dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
Input: adc-joystick - fix optional value handling
Input: synaptics - enable SMBus for HP Elitebook 840 G2
Input: ads7846 - ratelimit the spi_sync error message
