i.MX8qxp Display Controller pixel engine consists of all processing units
that operate in the AXI bus clock domain. Command sequencer and interrupt
controller of the Display Controller work with AXI bus clock, but they are
not in pixel engine.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-5-victor.liu@nxp.com
i.MX8qxp Display Controller display engine consists of all processing units
that operate in a display clock domain.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-4-victor.liu@nxp.com
i.MX8qxp Display Controller contains a blit engine for raster graphics.
It may read up to 3 source images from memory and computes one destination
image from it, which is written back to memory.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-3-victor.liu@nxp.com
Freescale i.MX8qxp Display Controller is implemented as construction set of
building blocks with unified concept and standardized interfaces. Document
all existing processing units.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-2-victor.liu@nxp.com
The MSM HDMI port nodes are missing any restrictions on additional
properties. The $ref should be to "/properties/port" rather than
"/$defs/port-base" as there are not additional properties in the nodes
to define.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/652299/
Link: https://lore.kernel.org/r/20250507215912.2748964-1-robh@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
HDMI on RK3036 use GRF control the HSYNC/VSYNC polarity, but this part
is missing when it first landing upstream.
Document that it is mandatory for RK3036 HDMI.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250422070455.432666-3-andyshrk@163.com
The RK3036 HDMI DDC bus requires it's PHY's reference clock to be enabled
first before normal DDC communication can be carried out.
Therefore, both RK3036 and RK3128 HDMI require two identical clocks.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250422070455.432666-2-andyshrk@163.com
The panel can be connected to via graph nodes, so allow the port property.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250430082850.244199-3-heiko@sntech.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The panel can be connected to via graph nodes, so allow the port property.
This fixes dtc checker warnings like:
>> arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-haikou-video-demo.dtb: panel@0 (leadtek,ltk050h3148w): 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml#
arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-haikou-video-demo.dtb: /edp@fdec0000: failed to match any schema with compatible: ['rockchip,rk3588-edp']
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504300218.VDqQqGTT-lkp@intel.com/
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250430082850.244199-2-heiko@sntech.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Describe the Mobile Display SubSystem (MDSS) device present on the
Qualcomm SAR2130P platform. It looks pretty close to SM8550 on the
system level. SAR2130P features two DSI hosts and single DisplayPort
controller.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/649265/
Link: https://lore.kernel.org/r/20250418-sar2130p-display-v5-5-442c905cb3a4@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Sitronix ST7571 is a dot matrix LCD controller supporting
both 4bit grayscale and monochrome LCDs.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250423-st7571-v6-1-e9519e3c4ec4@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Convert ldb.txt to yaml format.
Additional changes
- fix clock-names order to match existed dts file.
- remove lvds-panel and iomuxc-gpr node in examples.
- fsl,imx6q-ldb fail back to fsl,imx53-ldb.
- add fsl,panel property to match existed dts.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250417145742.3568572-1-Frank.Li@nxp.com
[robh: Use #/properties/port schema for port]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert fsl-imx-drm.txt to yaml format and create 5 yaml files for
differences purpose.
Additional changes:
- add missed include file in examples.
- add clocks, clock-names for ipu.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250415212943.3400852-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Compared with RK3288/RK3399, the HBR2 link rate support is the main
improvement of RK3588 eDP TX controller, and there are also two
independent eDP display interfaces on RK3588 Soc.
The newly added 'apb' reset is to ensure the APB bus of eDP controller
works well on the RK3588 SoC.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-10-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
According to Documentation/devicetree/bindings/display/dp-aux-bus.yaml,
it is a good way to get panel through the DP AUX bus.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-5-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add a DT binding for the Visionox G2647FB105, a 6.47 inch 1080x2340
MIPI-DSI CMD mode AMOLED panel used in:
- Xiaomi Mi Note 10 / CC9 Pro (sm7150-xiaomi-tucana)
- Xiaomi Mi Note 10 Lite (sm7150-xiaomi-toco)
Xiaomi likes to use different panels in various revisions of the same
device. A factory panel even can be replaced with another model in a
service center.
So, the power configuration of this panel is similar to
some Samsung AMOLED panels, e.g. samsung,ams639rq08, which can be found on
other sm7150 Xiaomi devices. Even though Samsung panels weren't used
in sm7150-xiaomi-tucana and toco, the described voltage rails exist
(confirmed by schematics of the device).
Signed-off-by: Alexander Baransky <sanyapilot496@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250414172637.197792-2-sanyapilot496@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250414172637.197792-2-sanyapilot496@gmail.com
Add a binding for the HDMI TX v2 Encoder found in MediaTek MT8195
and MT8188 SoCs.
This fully supports the HDMI Specification 2.0b, hence it provides
support for 3D-HDMI, Polarity inversion, up to 16 bits Deep Color,
color spaces including RGB444, YCBCR420/422/444 (ITU601/ITU709) and
xvYCC, with output resolutions up to 3840x2160p@60Hz.
Moreover, it also supports HDCP 1.4 and 2.3, Variable Refresh Rate
(VRR) and Consumer Electronics Control (CEC).
This IP also includes support for HDMI Audio, including IEC60958
and IEC61937 SPDIF, 8-channel PCM, DSD, and other lossless audio
according to HDMI 2.0.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250415104321.51149-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add compatible strings for the AAL, COLOR, MERGE and PADDING
hardware components found in MediaTek's MT8188 SoC.
This hardware is compatible with MT8195.
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@mediatek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241218105320.38980-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
assigned-clock properties are implicitly allowed in any node with
'clocks' and don't have to be specified. The max here also appears to be
wrong as there's a case with 4 entries.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250404214030.401629-1-robh@kernel.org
This controller support scalable data lanes from 1 to 4. Add the
'data-lanes' property to configure the number of MIPI display panel lanes
selected for boards.
Change $ref of port@1 from 'port' to 'port-base' and add 'endpoint'
property referencing video-interfaces.yaml. Allow 'data-lanes' values
1, 2, 3, and 4 for port@1.
Fix below CHECK_DTB warnings:
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb:
dsi@30a00000: ports:port@1:endpoint: Unevaluated properties are not allowed ('data-lanes' was unexpected)
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250407150442.2778299-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
DT core:
- Fix ref counting errors in interrupt parsing code
- Allow "nonposted-mmio" property per device and on non-Apple h/w
- Use typed accessors in platform driver code
- Fix mismatch between DT MAX_PHANDLE_ARGS and NR_FWNODE_REFERENCE_ARGS
and increase the maximum number args
- Rework of_resolve_phandles() to use __free() cleanup and fix ref count
error
- Use of_prop_cmp() in a few more places
- Improve make_fit.py script error handling
DT bindings:
- Update DT property ordering rules for properties within groups (i.e.
common suffix)
- Update DT submitting-patches doc to cover sending .dts patches and
SoC maintainer rules on being warning free against linux-next
- Add ti,tps53681, ti,tps53681, Maxim max15301, max15303, and
max20751 to trivial devices
- Add Renesas RZ/V2H(P) and Allwinner H616 support to Arm Mali Bifrost
GPU. Add Samsung exynos7870 support to Arm Mail Midgard.
- Rework qcom,ebi2 and samsung,exynos4210-sram memory controller
bindings to split child node properties. Fix the LAN9115 binding to
use the child node schema so all properties are documented.
- Convert nxp,lpc3220-mic and Altera ECC manager bindings to schema
- Fix some issues with LVDS display panels causing validation warnings
- Drop some obsolete parts of Xilinx bindings
-----BEGIN PGP SIGNATURE-----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=DTXf
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix ref counting errors in interrupt parsing code
- Allow "nonposted-mmio" property per device and on non-Apple h/w
- Use typed accessors in platform driver code
- Fix mismatch between DT MAX_PHANDLE_ARGS and
NR_FWNODE_REFERENCE_ARGS and increase the maximum number args
- Rework of_resolve_phandles() to use __free() cleanup and fix ref
count error
- Use of_prop_cmp() in a few more places
- Improve make_fit.py script error handling
DT bindings:
- Update DT property ordering rules for properties within groups
(i.e. common suffix)
- Update DT submitting-patches doc to cover sending .dts patches and
SoC maintainer rules on being warning free against linux-next
- Add ti,tps53681, ti,tps53681, Maxim max15301, max15303, and
max20751 to trivial devices
- Add Renesas RZ/V2H(P) and Allwinner H616 support to Arm Mali
Bifrost GPU. Add Samsung exynos7870 support to Arm Mail Midgard.
- Rework qcom,ebi2 and samsung,exynos4210-sram memory controller
bindings to split child node properties. Fix the LAN9115 binding to
use the child node schema so all properties are documented.
- Convert nxp,lpc3220-mic and Altera ECC manager bindings to schema
- Fix some issues with LVDS display panels causing validation
warnings
- Drop some obsolete parts of Xilinx bindings"
* tag 'devicetree-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (48 commits)
scripts/make_fit: Print DT name before libfdt errors
dt-bindings: edac: altera: socfpga: Convert to YAML
dt-bindings: pps: gpio: Correct indentation and style in DTS example
media: dt-bindings: mediatek,vcodec-encoder: Drop assigned-clock properties
of: address: Allow to specify nonposted-mmio per-device
of: address: Expand nonposted-mmio to non-Apple Silicon platforms
docs: dt-bindings: Specify ordering for properties within groups
dt-bindings: gpu: arm,mali-midgard: add exynos7870-mali compatible
of: Move of_prop_val_eq() next to the single user
of/platform: Use typed accessors rather than of_get_property()
dt-bindings: trivial-devices: Add Maxim max15301, max15303, and max20751
dt-bindings: fsi: ibm,p9-scom: Add "ibm,fsi2pib" compatible
dt-bindings: memory-controllers: qcom,ebi2: Enforce child props
dt-bindings: memory-controllers: samsung,exynos4210-srom: Enforce child props
dt-bindings: display: mitsubishi,aa104xd12: Adjust allowed and required properties
dt-bindings: display: mitsubishi,aa104xd12: Allow jeida-18 for data-mapping
dt-bindings: interrupt-controller: Convert nxp,lpc3220-mic.txt to yaml format
docs: process: maintainer-soc-clean-dts: linux-next is decisive
docs: dt: submitting-patches: Document sending DTS patches
of: Align macro MAX_PHANDLE_ARGS with NR_FWNODE_REFERENCE_ARGS
...
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006,
Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do
firmware updates in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs
-----BEGIN PGP SIGNATURE-----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=oK/N
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
The Samsung ATNA40YK20 panel is a 14" AMOLED eDP panel. It is
similar to the ATNA33XC20 except that it is larger and has a
different resolution.
Signed-off-by: Christopher Obbard <christopher.obbard@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250325-wip-obbardc-qcom-t14s-oled-panel-v2-1-e9bc7c9d30cc@linaro.org
1. HDMI fixup and refinement
2. Move to devm_platform_ioremap_resource() usage
3. Add MT8188 dsc compatible
4. Fix config_updating flag never false when no mbox channel
5. dp: drm_err => dev_err in HPD path to avoid NULL ptr
6. Add dpi power-domains example
7. Add MT8365 SoC support
8. Fix error codes in mtk_dsi_host_transfer()
-----BEGIN PGP SIGNATURE-----
iQJMBAABCgA2FiEEACwLKSDmq+9RDv5P4cpzo8lZTiQFAmfSFsQYHGNodW5rdWFu
Zy5odUBrZXJuZWwub3JnAAoJEOHKc6PJWU4kXC4P/RX557IVcuS9QHo/2c+xBxLL
GdYSbB5PHuhnAlFdGSDRjZTXrPgHlhr/CzvsC+n2zi60t8Dx3j0fcRn/UM/XRrjh
xoiNLxGl648QxsF5L4elcv1YABMJLTgMNs/1qzXxbDGGf8N0YHg2w4AH+RTG+0b9
nBr751Ck2AZ3nLPG6u6xbXYFgH1SsoxCBBIsmKcgQMcSc2Y0fRYtMjFkZQ0Mu2Ib
6/Qsrg64xrx2Vkn07Aa4Z73gEqfXFK5wQIKl02cvAT7uTMmKWhM+UUTJ6QCO+Cs0
w50XzfZaJmlivcLn4Pu5IC3HsF9mzYMSBBeByih0Oh9REJZ6HcmLYLu0uxGaBfde
3WYUw7mrPmNsAHnHKAXYuR8Wqm0MiBBk+whc8ngHNkXXiR8aTuIx6UNRQWmlff4b
m9SCd3ClDGHmq7pSycUusXZmQaRGp8ecMZkqUNiDIIYId4ffURavSMv1hr8d89v3
dlV9Szzv0sdZNSSY8AsXAh1/M8ZFOctG/2IP3THepLV2rdaNEW4Y/8irZC9AMG0B
7+6fDUtfPQ6qdkNFwjJ8n5MJ1YtYXIAAMhA+x73u2iRQuaxUz0NKhvX4M8n/wSCp
7rY7tG6av3o7BKFT1nv8z7ZjY69hb/eNpaqfanhKZ50DZGFEP+zXa7dKPmyw1lXa
oMLfkB2lAhSufFvxvQHs
=PiUo
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-6.15-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.15
1. HDMI fixup and refinement
2. Move to devm_platform_ioremap_resource() usage
3. Add MT8188 dsc compatible
4. Fix config_updating flag never false when no mbox channel
5. dp: drm_err => dev_err in HPD path to avoid NULL ptr
6. Add dpi power-domains example
7. Add MT8365 SoC support
8. Fix error codes in mtk_dsi_host_transfer()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250312232909.9304-1-chunkuang.hu@kernel.org
DPI is part of the display / multimedia block in MediaTek SoCs, and
always have a power-domain (at least in the upstream device-trees).
Add the power-domains property to the binding example.
Fixes: 9273cf7d39 ("dt-bindings: display: mediatek: convert the dpi bindings to yaml")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231023-display-support-v7-1-6703f3e26831@baylibre.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Specific constrain in if:then: blocks for variable lists, like clocks
and clock-names, should have a fixed upper and lower size. Older
dtschema implied minItems, but that's not true since 2024 and missing
minItems means that lower bound is not set.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/638751/
Link: https://lore.kernel.org/r/20250221-b4-sm8750-display-v3-2-3ea95b1630ea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The Tegra124 MIPI hardware block is very similar to the one found on
earlier chip generations. Add a corresponding compatible string.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Mitsubishi aa104xd12 panel requires an external backlight driver
circuit, so allow the "backlight" property.
There are users of this panel without a vcc-supply, so it shouldn't be
required.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250225210316.3043357-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The Qualcomm SA8775p MDSS display block comes with eDP phy, already used
in DTS and already documented in phy/qcom,edp-phy.yaml binding. Add the
missing device node in the binding and extend example to silence
dtbs_check warnings like:
sa8775p-ride.dtb: display-subsystem@ae00000: Unevaluated properties are not allowed ('phy@aec2a00', 'phy@aec5a00' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/638744/
Link: https://lore.kernel.org/r/20250221151311.138755-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add vop found on rk3576, the main difference between rk3576 and the
previous vop is that each VP has its own interrupt line.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303034436.192400-7-andyshrk@163.com
The clock polarity of RGB signal output is controlled by GRF, this
property is already being used in the current device tree, but
forgot to describe it as a required property in the binding file.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303034436.192400-6-andyshrk@163.com
As more SoCs variants are introduced, each SoC brings its own
unique set of constraints, describe this constraints SoC by
SoC will make things easier.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303034436.192400-5-andyshrk@163.com
Add bindings for a secondary display controller present on certain
Apple laptops.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224-adpdrm-v8-1-cccf96710f0f@gmail.com
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Add compatible for Display Stream Compression (DSC) IP found in
the display controller of the MT8188 SoC.
This IP is fully compatible with the one found on MT8195.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250218090427.20318-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add compatibles for the Digital Parallel Interface (DPI) block
found in the MT8195 and MT8188 SoCs: inside of the chip, this one
is directly connected to the HDMI block.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Document Adreno 623 GMU in the dt-binding specification.
Signed-off-by: Jie Zhang <quic_jiezh@quicinc.com>
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/640058/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The mdp1-mem is not supported on the SM8550 SoCs, and having maxItems=2
makes the bindings not clear if mdp0-mem/mdp1-mem or mdp0-mem/cpu-cfg
is required, so explicitly document the mdp0-mem/cpu-cfg interconnect
paths and complete the example with the missing interconnect paths.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637051/
Link: https://lore.kernel.org/r/20250213-topic-sm8x50-mdss-interconnect-bindings-fix-v4-2-3fa0bc42dd38@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The mdp1-mem is not supported on the SM8550 SoCs, and having maxItems=2
makes the bindings not clear if mdp0-mem/mdp1-mem or mdp0-mem/cpu-cfg is
required, so explicitly document the mdp0-mem/cpu-cfg interconnect and
add the cpu-cfg path in the example.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637050/
Link: https://lore.kernel.org/r/20250213-topic-sm8x50-mdss-interconnect-bindings-fix-v4-1-3fa0bc42dd38@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DSI phys, from earliest (28 nm) up to newest (3 nm) generation, provide
two clocks. The respective clock ID is used by drivers and DTS, so it
should be documented as explicit ABI.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/634146/
Link: https://lore.kernel.org/r/20250127132105.107138-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' into drm-next
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next
can base on rc4.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Both the TI SN65DSI83 and SN65DSI84 bridges have an IRQ pin to signal
errors using interrupt.
This interrupt is not documented in the binding.
Add the missing interrupts property.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-2-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add a new compatible for the panels KINGDISPLAY KD110N11-51IE and
STARRY 2082109QFH040022-50E. Both panels use the HX83102 IC, so
add the compatible to the hx83102 bindings file.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250208105326.3850358-2-yelangyan@huaqin.corp-partner.google.com
Add a new compatible for the panel CSOT PNA957QT1-1. This panel uses
HX83102 IC, so add the compatible to the hx83102 binding files.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206131300.1295111-3-yelangyan@huaqin.corp-partner.google.com
On RK3588, HDMI PHY PLL can be used as an alternative and more accurate
pixel clock source for VOP2 video ports 0, 1 and 2.
Document the optional PLL clock properties corresponding to the two HDMI
PHYs available on the SoC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204-vop2-hdmi0-disp-modes-v3-1-d71c6a196e58@collabora.com
The hdptxphy is a combo transmit-PHY for HDMI2.1 TMDS Link, FRL Link, DP
and eDP Link. Therefore, it is better to name it hdptxphy0 other than
hdptxphy_hdmi0, which will be referenced by both hdmi0 and edp0 nodes.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206030330.680424-2-damon.ding@rock-chips.com
This patch provides the DT Schema description of:
- powertip,st7272 320 x 240 LCD display
- powertip,hx8238a 320 x 240 LCD display
Used with the different HW revisions of btt3 devices.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20250109154149.1212631-1-lukma@denx.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Fix incorrect format of compatible string (comma instead of hyphen) for
TI's AM62A7 SoC.
s/ti,am62a7,dss/ti,am62a7-dss
Fixes: 7959ceb767 ("dt-bindings: display: ti: Add support for am62a7 dss")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250203155431.2174170-1-devarsht@ti.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks, clock-names, interrupts, resets, reset-names, renesas,cmms
and renesas,vsps.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250128094719.63776-2-krzysztof.kozlowski@linaro.org
Each variable-length property like interrupts or resets must have fixed
constraints on number of items for given variant in binding. The
clauses in "if:then:" block should define both limits: upper and lower.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250128094719.63776-1-krzysztof.kozlowski@linaro.org
DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power Domain
Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom QCS8300
remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and NXP iMX35
GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out some
x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling
-----BEGIN PGP SIGNATURE-----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=3bID
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power
Domain Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom
QCS8300 remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and
NXP iMX35 GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the
kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out
some x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling"
* tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
of: address: Fix empty resource handling in __of_address_resource_bounds()
of/fdt: Restore possibility to use both ACPI and FDT from bootloader
docs: dt-bindings: Document preferred line wrapping
dt-bindings: ufs: Correct indentation and style in DTS example
of: Correct element count for two arrays in API of_parse_phandle_with_args_map()
of: reserved-memory: Warn for missing static reserved memory regions
of: Do not expose of_alias_scan() and correct its comments
dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindings
dt-bindings: arm: coresight: Update the pattern of ete node name
of: Warn when of_property_read_bool() is used on non-boolean properties
device property: Split property reading bool and presence test ops
of/fdt: Check fdt_get_mem_rsv() error in early_init_fdt_scan_reserved_mem()
of: reserved-memory: Move an assignment to effective place in __reserved_mem_alloc_size()
of: reserved-memory: Do not make kmemleak ignore freed address
of: reserved-memory: Fix using wrong number of cells to get property 'alignment'
of: Remove a duplicated code block
of: property: Avoiding using uninitialized variable @imaplen in parse_interrupt_map()
of: Correct child specifier used as input of the 2nd nexus node
dt-bindings: interrupt-controller: ti,omap4-wugen-mpu: Add file extension
...
We see the addition of eleven new SoCs, including a total of sixx arm64
chips from Qualcomm alone. Overall, the Qualcomm platforms once again
make up the majority of all changes, after a couple of quieter releases.
The new SoCs in this branch are:
- Microchip sama7d65 is a new 32-bit embedded chip with a single
Cortex-A7 and the current high end of the old Atmel SoC line.
- Samsung Exynos 9810 is a mobile phone chip used in some older
phones like the Samsung Galaxy S9
- Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of
the V4H (R8A779G0) low-power automotive SoC
- Renesas RZ/G3E (R0A09G047) is a family of embedded chips
using Cortex-A55 cores
- Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on
Qualcomm's Oryon CPU cores.
- Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality
glasses.
- Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial
IOT platforms.
- Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016
- Qualcomm IPQ5424 is a Wi-Fi 7 networking chip
All of the above are part of already supported SoC families that
only need new devicetree files. Two additional SoCs in new
families are part of a separate branch.
There are 48 new machines in total, including six arm32 ones based
on aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores,
and a single risc-v board, the Banana Pi R3.
The remaining ones use arm64 chips from Broadcom, Samsung, NXP, Mediatek,
Qualcomm, Renesas and Rockchips and cover development boards, phones,
laptops, industrial machines routers.
A lot of ongoing work is for cleaning up build time warnings and other
issues, in addition to the new machines and added features.
-----BEGIN PGP SIGNATURE-----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=vdmR
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"We see the addition of eleven new SoCs, including a total of sixx
arm64 chips from Qualcomm alone. Overall, the Qualcomm platforms once
again make up the majority of all changes, after a couple of quieter
releases.
The new SoCs in this branch are:
- Microchip sama7d65 is a new 32-bit embedded chip with a single
Cortex-A7 and the current high end of the old Atmel SoC line.
- Samsung Exynos 9810 is a mobile phone chip used in some older
phones like the Samsung Galaxy S9
- Renesas R-Car V4H ES3.0 (R8A779G3) is an updated version of the V4H
(R8A779G0) low-power automotive SoC
- Renesas RZ/G3E (R0A09G047) is a family of embedded chips using
Cortex-A55 cores
- Qualcomm Snapdragon 8 Elite (SM8750) is a new phone chip based on
Qualcomm's Oryon CPU cores.
- Qualcomm Snapdragon AR2 (SAR2130P) is a SoC for augmented reality
glasses.
- Qualcomm IQ6 (QCS610) and IQ8 (QCS8300) are two industrial IOT
platforms.
- Snapdragon 425 (MSM8917) is a mobile phone SoC from 2016
- Qualcomm IPQ5424 is a Wi-Fi 7 networking chip
All of the above are part of already supported SoC families that only
need new devicetree files. Two additional SoCs in new families are
part of a separate branch.
There are 48 new machines in total, including six arm32 ones based on
aspeed. broadcom, microchip and st SoCs all using Cortex-A7 cores, and
a single risc-v board, the Banana Pi R3.
The remaining ones use arm64 chips from Broadcom, Samsung, NXP,
Mediatek, Qualcomm, Renesas and Rockchips and cover development
boards, phones, laptops, industrial machines routers.
A lot of ongoing work is for cleaning up build time warnings and other
issues, in addition to the new machines and added features"
* tag 'soc-dt-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (619 commits)
arm64: tegra: Fix Tegra234 PCIe interrupt-map
arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM
dt-bindings: arm: rockchip: Add Firefly ITX-3588J board
arm64: dts: rockchip: Add Orange Pi 5 Max board
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max
arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi
arm64: dts: rockchip: add WLAN to rk3588-evb1 controller
arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma
arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes
arm64: tegra: Disable Tegra234 sce-fabric node
arm64: tegra: Fix typo in Tegra234 dce-fabric compatible
arm64: tegra: Fix DMA ID for SPI2
arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: Remove unused and undocumented properties
arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
arm64: dts: qcom: pmi8950: add LAB-IBB nodes
arm64: dts: qcom: ipq5424: enable the download mode support
...
core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmeJ5qYACgkQDHTzWXnE
hr4o+w/9EbijDfyf8GCj4Qaxov8nZ3KEMW8LLmrYO3epfLsniX+nv01oNdbRXBjl
QcsKixAvkyfLl61RuPnwbYiSJfxgwZ5K8rke7cshwlMB7zl7xZ+GZRoAmJlnokS4
uhmclCriW5nfKRNAGUPcj/ReGZeyHwqvGZn3jyuShkIFpE4rDope4DQsTzm/zs/i
+cKyRAFm86EIdTACr9DVtb1L5uNZOnHDkufRH5EZr/7CWFco1krLxb/r4cvFaiIO
GiDaLvXKXKwzQ6NeIWWCEU2zTBz0BluI8ggxp1+WlDiYgLDWtCBpBNPAoNJO/iQS
J+E8bsk2b/aCLSJQgxcK0y80CXpoJyALaqStdHUqxuWv3/o0g8lFUJlfJVCNPIsg
o4mBkdbgkzkHCPxUbie7uQIx+2DIsEiwWC/YGBeRx49qEYsLWyFHf6JR8j9aHCQq
eGanaubzR+W2AC81yktd3rcxpmX5kq8n6ax3ZtS9wnio8iyB5jBDM8QeFSAE/vXV
B5TT1nneh+HXJ6bTwZBFXkiq2JRxUdbZIS5oQLh0zixVthBMISSsYhJ222nH1bC4
DWIS2ggqSgqkb0WsE29CJyhJ1fPmS3v7lBXqPvjmN5vMto4gGOJAEgT6CiDpGFIz
zXzNfrirr1r95iSST4PnYVOOkfK3t9gvbWMXgkr0wygtxyoxHzk=
=5FIc
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There are two external interactions of note, the msm tree pull in some
opp tree, hopefully the opp tree arrives from the same git tree
however it normally does.
There is also a new cgroup controller for device memory, that is used
by drm, so is merging through my tree. This will hopefully help open
up gpu cgroup usage a bit more and move us forward.
There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs.
Then the usual xe/amdgpu/i915/msm leaders and lots of changes and
refactors across the board:
core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on
suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine
instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two
SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling"
* tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits)
drm/bridge: fix documentation for the hdmi_audio_prepare() callback
doc/cgroup: Fix title underline length
drm/doc: Include new drm-compute documentation
cgroup/dmem: Fix parameters documentation
cgroup/dmem: Select PAGE_COUNTER
kernel/cgroup: Remove the unused variable climit
drm/display: hdmi: Do not read EDID on disconnected connectors
drm/tests: hdmi: Add connector disablement test
drm/connector: hdmi: Do atomic check when necessary
drm/amd/display: 3.2.316
drm/amd/display: avoid reset DTBCLK at clock init
drm/amd/display: improve dpia pre-train
drm/amd/display: Apply DML21 Patches
drm/amd/display: Use HW lock mgr for PSR1
drm/amd/display: Revised for Replay Pseudo vblank control
drm/amd/display: Add a new flag for replay low hz
drm/amd/display: Remove unused read_ono_state function from Hwss module
drm/amd/display: Do not elevate mem_type change to full update
drm/amd/display: Do not wait for PSR disable on vbl enable
drm/amd/display: Remove unnecessary eDP power down
...
Updates for v6.14
MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
MDP4:
- several small fixes
DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- fixed modes filtering for platforms w/o 3DMux
- fixed DSPP DSPP_2 / _3 links on several platforms
- corrected DSPP definitions on SDM670
- added CWB hardware blocks support
- added VBIF to DPU snapshots
- dropped struct dpu_rm_requirements
DP:
- reworked DP audio support
DSI:
- added SM6150 (aka QCS615) support
GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Link: https://lore.kernel.org/r/20250107125854.227233-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
1. Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing"
2. Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err
3. Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
4. Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
5. Add support for 180-degree rotation in the display driver
6. Stop selecting foreign drivers
7. Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
8. Fix YCbCr422 color format issue for DP
9. Fix mode valid issue for dp
10. dp: Reference common DAI properties
11. dsi: Add registers to pdata to fix MT8186/MT8188
12. Remove unneeded semicolon
13. Add return value check when reading DPCD
14. Initialize pointer in mtk_drm_of_ddp_path_build_one()
-----BEGIN PGP SIGNATURE-----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=bc7g
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-fixes-20250104' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20250104
1. Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing"
2. Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err
3. Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
4. Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
5. Add support for 180-degree rotation in the display driver
6. Stop selecting foreign drivers
7. Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
8. Fix YCbCr422 color format issue for DP
9. Fix mode valid issue for dp
10. dp: Reference common DAI properties
11. dsi: Add registers to pdata to fix MT8186/MT8188
12. Remove unneeded semicolon
13. Add return value check when reading DPCD
14. Initialize pointer in mtk_drm_of_ddp_path_build_one()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250104124227.45505-1-chunkuang.hu@kernel.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmd7BBQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGfEEH/3oyTWmD5DPX2lLp
SujyKrEs6bfMQTKKYHzuy8OvzDXkBpZiKXIsCgjF5sXwQVgB7KPfJwgjt5xLo3F3
NTehLGwII7bM8mSq3wHDMeNkyBle4VYA9XOR8tXj21j7aRt9S4U/vtXiYeD9BWhC
Y1p+1FXKfZf7TjNpu8lIl+zLjSFDjYwM8h72dIuHnrYeuFL88fnWwoNP/MFkk5Kk
ce3ol3EtFe/M4GbVOm7KfzEkbsEE6ES60O0suxwYDn+71EA6ExVHFBKqpQvfj71/
ynxWYIwMoiCZWtJ+ali1g/ms0OxG+ivH8+xasBYTcDICZMe/XGX5Yx+Wm5DH5/Ev
pGMyvbI=
=yrc7
-----END PGP SIGNATURE-----
Merge tag 'v6.13-rc6' into drm-next
This backmerges Linux 6.13-rc6 this is need for the newer pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This add a imx7(d) specific compatible which is compatible to imx8mm.
This silences the dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: dsi@30760000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx7d-mipi-dsim', 'fsl,imx8mm-mipi-dsim'] is too long
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250107094943.518474-3-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Modify rules for both MT8195 and MT8188.
Hardware capabilities include color formats and AFBC are
changed since MT8195, stop using the settings of MT8183.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20241219181531.4282-3-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add compatible strings for the MDP3 OVL hardware components in
MediaTek's MT8188 SoC and it is compatible with the existing
MT8195 MDP OVL components.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241219181531.4282-2-jason-jh.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
RK3576 HDMI TX Controller is very similar to that of RK3588, but
with some control bits for IO and interrupts status scattered across
different GRF.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241231094425.253398-3-andyshrk@163.com
The MediaTek DP hardware supports audio and exposes a DAI, so the
'#sound-dai-cells' property is needed for describing the DAI links.
Reference the dai-common.yaml schema to allow '#sound-dai-cells' to be
used, and filter out non-DP compatibles as MediaTek eDP in the same
binding doesn't support audio.
This fixes dtbs_check error:
'#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241105090207.3892242-1-fshao@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
