This reverts commit c3d237075b.
When you call gst_buffer_add_video_meta_full GStreamer assumes that
buffer is contiguous. Specifically GStreamer assumes that the first
chunk is big enough to hold a whole frame. This results usually in
some pixel shifts in the video. The pixel shifts you can see are
artifacts due to how the guest sends the frames.
Assuming you allocate the 2 chunks with 2 malloc:
p1 = malloc(size);
...
p2 = malloc(size);
Usually the memory allocator tend to allocate linearly if there are
space adding a prefix to describe next block leading to a memory
arrangement as:
+-------------------+
| p1 prefix |
+-------------------+
| p1 buffer |
+-------------------+
| p2 prefix |
+-------------------+
| p2 buffer |
+-------------------+
now if you take p1 pointer and you assume it points to a 2 * size
buffer you will get p2 prefix in the middle, this prefix is the pixel
shifts.
Problems happens specifically in gst_video_frame_map_id.
This bug is reported in https://bugzilla.gnome.org/show_bug.cgi?id=779524.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
A few dispose/finalize implementations were not chaining up to their
parent classes, causing memory leaks.
This fixes leaks like the following:
==16240== Memcheck, a memory error detector
==16240== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==16240== Using Valgrind-3.12.0 and LibVEX; rerun with -h for copyright info
==16240== Command: ./test-leaks
==16240==
==16240==
==16240== HEAP SUMMARY:
==16240== in use at exit: 245,490 bytes in 3,638 blocks
==16240== total heap usage: 5,418 allocs, 1,780 frees, 17,676,968 bytes allocated
==16240==
==16240== 16 bytes in 1 blocks are definitely lost in loss record 203 of 771
==16240== at 0x4C2DADE: malloc (vg_replace_malloc.c:298)
==16240== by 0x4C2FC91: realloc (vg_replace_malloc.c:785)
==16240== by 0x52864E: dispatcher_register_handler (dispatcher.c:374)
==16240== by 0x5293E0: main_dispatcher_constructed (main-dispatcher.c:315)
==16240== by 0x7F873DB: g_object_new_internal (gobject.c:1823)
==16240== by 0x7F87EE4: g_object_new_valist (gobject.c:2042)
==16240== by 0x7F86E90: g_object_new (gobject.c:1626)
==16240== by 0x5292A5: main_dispatcher_new (main-dispatcher.c:295)
==16240== by 0x429A0A: do_spice_init (reds.c:3416)
==16240== by 0x42A3F5: spice_server_init (reds.c:3663)
==16240== by 0x4095B1: server_leaks (test-leaks.c:45)
==16240== by 0x844C60A: test_case_run (gtestutils.c:2161)
==16240== by 0x844C9CA: g_test_run_suite_internal (gtestutils.c:2244)
==16240== by 0x844CA73: g_test_run_suite_internal (gtestutils.c:2256)
==16240== by 0x844CC8A: g_test_run_suite (gtestutils.c:2332)
==16240== by 0x844B92C: g_test_run (gtestutils.c:1599)
==16240== by 0x409A0B: main (test-leaks.c:126)
==16240==
==16240== 16 bytes in 1 blocks are definitely lost in loss record 204 of 771
==16240== at 0x4C2DADE: malloc (vg_replace_malloc.c:298)
==16240== by 0x4C2FC91: realloc (vg_replace_malloc.c:785)
==16240== by 0x52864E: dispatcher_register_handler (dispatcher.c:374)
==16240== by 0x5293E0: main_dispatcher_constructed (main-dispatcher.c:315)
==16240== by 0x7F873DB: g_object_new_internal (gobject.c:1823)
==16240== by 0x7F87EE4: g_object_new_valist (gobject.c:2042)
==16240== by 0x7F86E90: g_object_new (gobject.c:1626)
==16240== by 0x5292A5: main_dispatcher_new (main-dispatcher.c:295)
==16240== by 0x429A0A: do_spice_init (reds.c:3416)
==16240== by 0x42A3F5: spice_server_init (reds.c:3663)
==16240== by 0x40BFD4: test_new (test-display-base.c:902)
==16240== by 0x40979D: vmc_leaks (test-leaks.c:92)
==16240== by 0x844C60A: test_case_run (gtestutils.c:2161)
==16240== by 0x844C9CA: g_test_run_suite_internal (gtestutils.c:2244)
==16240== by 0x844CA73: g_test_run_suite_internal (gtestutils.c:2256)
==16240== by 0x844CC8A: g_test_run_suite (gtestutils.c:2332)
==16240== by 0x844B92C: g_test_run (gtestutils.c:1599)
==16240== by 0x409A0B: main (test-leaks.c:126)
==16240==
==16240== 96 bytes in 1 blocks are definitely lost in loss record 638 of 771
==16240== at 0x4C2FA50: calloc (vg_replace_malloc.c:711)
==16240== by 0x8427D3C: g_malloc0 (gmem.c:124)
==16240== by 0x842801F: g_malloc0_n (gmem.c:355)
==16240== by 0x527B44: dispatcher_constructed (dispatcher.c:141)
==16240== by 0x529321: main_dispatcher_constructed (main-dispatcher.c:307)
==16240== by 0x7F873DB: g_object_new_internal (gobject.c:1823)
==16240== by 0x7F87EE4: g_object_new_valist (gobject.c:2042)
==16240== by 0x7F86E90: g_object_new (gobject.c:1626)
==16240== by 0x5292A5: main_dispatcher_new (main-dispatcher.c:295)
==16240== by 0x429A0A: do_spice_init (reds.c:3416)
==16240== by 0x42A3F5: spice_server_init (reds.c:3663)
==16240== by 0x4095B1: server_leaks (test-leaks.c:45)
==16240== by 0x844C60A: test_case_run (gtestutils.c:2161)
==16240== by 0x844C9CA: g_test_run_suite_internal (gtestutils.c:2244)
==16240== by 0x844CA73: g_test_run_suite_internal (gtestutils.c:2256)
==16240== by 0x844CC8A: g_test_run_suite (gtestutils.c:2332)
==16240== by 0x844B92C: g_test_run (gtestutils.c:1599)
==16240== by 0x409A0B: main (test-leaks.c:126)
==16240==
==16240== 96 bytes in 1 blocks are definitely lost in loss record 639 of 771
==16240== at 0x4C2FA50: calloc (vg_replace_malloc.c:711)
==16240== by 0x8427D3C: g_malloc0 (gmem.c:124)
==16240== by 0x842801F: g_malloc0_n (gmem.c:355)
==16240== by 0x527B44: dispatcher_constructed (dispatcher.c:141)
==16240== by 0x529321: main_dispatcher_constructed (main-dispatcher.c:307)
==16240== by 0x7F873DB: g_object_new_internal (gobject.c:1823)
==16240== by 0x7F87EE4: g_object_new_valist (gobject.c:2042)
==16240== by 0x7F86E90: g_object_new (gobject.c:1626)
==16240== by 0x5292A5: main_dispatcher_new (main-dispatcher.c:295)
==16240== by 0x429A0A: do_spice_init (reds.c:3416)
==16240== by 0x42A3F5: spice_server_init (reds.c:3663)
==16240== by 0x40BFD4: test_new (test-display-base.c:902)
==16240== by 0x40979D: vmc_leaks (test-leaks.c:92)
==16240== by 0x844C60A: test_case_run (gtestutils.c:2161)
==16240== by 0x844C9CA: g_test_run_suite_internal (gtestutils.c:2244)
==16240== by 0x844CA73: g_test_run_suite_internal (gtestutils.c:2256)
==16240== by 0x844CC8A: g_test_run_suite (gtestutils.c:2332)
==16240== by 0x844B92C: g_test_run (gtestutils.c:1599)
==16240== by 0x409A0B: main (test-leaks.c:126)
==16240==
==16240== LEAK SUMMARY:
==16240== definitely lost: 224 bytes in 4 blocks
==16240== indirectly lost: 0 bytes in 0 blocks
==16240== possibly lost: 0 bytes in 0 blocks
==16240== still reachable: 207,718 bytes in 3,312 blocks
==16240== of which reachable via heuristic:
==16240== newarray : 1,536 bytes in 16 blocks
==16240== suppressed: 34,548 bytes in 302 blocks
==16240== Reachable blocks (those to which a pointer was found) are not shown.
==16240== To see them, rerun with: --leak-check=full --show-leak-kinds=all
==16240==
==16240== For counts of detected and suppressed errors, rerun with: -v
==16240== ERROR SUMMARY: 4 errors from 4 contexts (suppressed: 20 from 20)
FAIL test-leaks (exit status: 1)
Acked-by: Frediano Ziglio <fziglio@redhat.com>
The code that manages pending QXL Drawable operations is fairly complex
and difficult to understand. This is an attempt to start documenting
that code to save time when we have to work on this code in the future.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
This commit changes all functions returning TRUE/FALSE from having an
'int' return value to 'bool'.
This way it's obvious that such a function is not going to return
anything else than TRUE or FALSE.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
config_socket is configuring the client stream socket.
As is responsibility of RedChannelClient to handle the stream
it make more sense to have the function in this object.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Verify stuff are freed correctly (like TLS context).
The different PKI file required are generated with
base values (localhost and rsa 1024).
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Add and remove some vmc device to check for leaking.
These combination assure that currently implemented type
of devices (webdav, usb and generic) are checked.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
The nested if statements could be confusing, no needs for them.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Send header and reply together.
This potentially save up to 160 bytes on the network which
is a considerable amount considering that the message is
about 50 bytes.
This as sending multiple chunks you can have different framing,
specifically:
- if you use TLS every chunk get encrypted separately
(reds-stream, currently usually 29 bytes for every chunks);
- tcp settings and no delay on socket. More likely with fast
connections or better network cards. The tcp framing is
usually about 80 bytes;
- additional tcp acknowledge (usually 64 bytes).
So 80 + 29 + 64 = 173 bytes.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
These vfuncs are more appropriate in RedChannelClient.
The buffer they allocated are related to the client stream
which is managed directly by RedChannelClient.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
This prepare for the next patch.
The network recieve buffer should be per-client rather than per-channel.
The following patch will make this change, but this common base class
will allow the cursor client and the display client to share a common
implementation.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
As the counters are shared there is no reason why not
handling the byte count from RedChannelClient directly.
This remove a dependency and avoid some function calls.
The only visible difference at user level is that the
counters are created when a client connects.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Show messages sent to clients.
This is useful to understand the message number as an high
message number can affects performance and is not easy to
understand the message count from the byte count (which is
available).
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Instead of disabling the code use the compatibility functions.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
[0] SPICE_MSGC_DISPLAY_PREFERRED_VIDEO_CODEC_TYPE
This message provides a list of video codecs based on client's order
of preference.
We duplicate the video codecs array from reds.c and sort it using the
order of codecs as reference.
This message will not change an ongoing streaming but it could change
newly created streams depending the rank value of each video codec
that can be set by spice_server_set_video_codecs()
Signed-off-by: Victor Toso <victortoso@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Allows to use recording function for multiple purposes.
This will allow to register multiple screen VM or recording
additional stuff like sound.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
The synchronization code is required to avoid mixing writing
from multiple threads.
Following patches will add this feature.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
For each channel there are two set of capabilities, one
for the common ones and one for the specific ones.
A single set were almost always passed using 2 arguments,
a number of elements and an array but then before using
these were converted to a GArray.
Use a single structure (already available) to pass all
channel capabilites using a single argument.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Add function to initialize and destroy this type.
Add GType type for boxing it.
These changes a in preparation for next patch.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
These properties are not read and code is broken (the content of
the array would be uninitialized).
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Watch was added but never removed.
The added basic_event_loop_destroy() addition allows to see that
this leak is gone).
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
This switches the test to using the GTest API, and add several tests
related to https://bugzilla.redhat.com/show_bug.cgi?id=1411194
This uses some API not available in glib 2.28, so this checks we have a
new enough glib before building this test, and disables warnings when
using too new glib API when building it.
The "multiple-vmc-devices" is based off code written by Frediano Ziglio.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Using spice_info() gets in the way of tests using
g_test_expect_message() as all the messages emitted using
a non-debug log level must be listed as expected, otherwise we get a
critical about an expected message not having been logged.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Currently, the network sockets opened by reds_init_net() are not closed
on destruction, in other words they are leaked.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Pavel Grunt <pgrunt@redhat.com>
This allows to chain several test cases by using
test_new()/test_destroy().
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Pavel Grunt <pgrunt@redhat.com>
Do not assume the device passed as an argument to
spice_server_char_device_remove_interface() is the same as the current
Reds::vdagent instance. This commit adds a check that this is the case,
and returns early if not.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
spice_new is a bit more safe as return a properly typed pointer.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
The usage was removed with commit 7ea1f2c133
("sound: Use RedChannelClient to receive/send data").
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Pavel Grunt <pgrunt@redhat.com>
Using X == TRUE is fragile, since the input value is a uint8_t. It would be
surprising if the value was set to 2 or 0xFF and the test failed.
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Some constants/macros/function prototypes are defined in
red-channel-client.h while they are only used by red-channel-client.c.
This commit moves them to the .c file to make them private.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
RedChannelClient is responsible for talking to the client so it knows
if is connected or not.
These vfuncs where used by DummyChannel used by SoundChannel.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Most channels don't need to do specific settings for the client socket
so avoid the need to do this setting making easier to setup the client
channnel.
Some improvements and commit subject suggested by Christophe Fergeau.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
TCP_NODELAY flag is set by default for all connection inside
reds.c so there's no need to set again for the single
client channel.
Note that there are still some calls to setsockopt to change this
option.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
