Instead of having MarkerPipeItem pointing to an external variable with
the possibility to forget to reset it and have a dangling pointer, this
commit takes a reference on the item to keep it alive after it was sent.
This item is placed into the queue to understand when it was sent. The
current implementation detects the unqueue when the item is destroyed so
we currently store a pointer to an external variable in the item, this
way we can use a variable which will still be alive after the item is
released/destroyed.
This change updates the variable (stored in the item) when we try to
send the item, rather than at destruction time. The destruction happened
at the end of red_channel_client_send_item(), so we don't mark
item_in_pipe much earlier than before.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
This is currently unlikely to happen since we communicate over a pipe
and the pipe buffer is sufficiently large to avoid splitting the
message. But for completeness, we should handle this scenario.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
put red_stream_disable_writev in an #ifdef HAVE_SASL block.
red_stream_disable_writev is only called from functions
that are already in an #ifdef HAVE_SASL block.
Currently when building with SASL disabled, I get:
CC red-stream.lo
red-stream.c:441:13: error: 'red_stream_disable_writev'
defined but not used [-Werror=unused-function]
Signed-off-by: Uri Lublin <uril@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
All other inputs_channel_set_* functions do not have this
parameter and get it from the channel.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Uri Lublin <uril@redhat.com>
Current code does not free allocated tablet resources.
When a tablet is added some resources are allocated.
Resources should be released either removing the tablet or
freeing spice server object.
Added a test to check these conditions.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Currently create device, open it and pass some messages checking
they are handled.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
common/mem.h contains mainly memory allocation functions.
As we decided to move to Glib calls directly avoid to include
function declaration we should not use anymore.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
This prevent future problems supporting new channels.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
This reduce the attack surface moving some data into read-only
sections.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Missing some names cause some debugging messages to be
generated and some of our tests to fail.
This patch was written by Christophe Fergeau.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
The code for reading a StreamDevice message from the streaming agent has
code to handle a situation where you only read a part of the header. If
we've read only a part of the header, we will try to read the remaining
n bytes of the header within a loop until the full header is read.
However, when we try to read the last n bytes, we store it at beginning
of the header struct, which will overwrite the first part of the header.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Include protocol header file defining StreamMsgFormat which is used in a
function signature in this header.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Frediano Ziglio <fziglio@redhat.com>
This commit adds red_channel_{debug,warning,printerr}() helpers which
will prepend the log message with "channel-name:id (%p)". It also
changes various locations which were doing this manually.
Acked-by: Frediano Ziglio <fziglio@redhat.com>
spice_server_set_channel_security() is already mostly doing that. We can
make its code more generic, and introduce a red_channel_get_name()
method. This method will then be used to make debug messages more
readable by showing the actual channel name rather than its type as
an int.
Acked-by: Frediano Ziglio <fziglio@redhat.com>
The objects RedsStream and RedsSASL are currently using the namespace
"Reds" rather than the standard "Red" namespace used throughout the rest
of the project. Change these to be consistent. This also means changing
method names and some related enumeration types.
The files were also renamed to reflect the change:
reds-stream.[ch] -> red-stream.[ch]
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
There are already other debugging code showing channel closure.
Not closed file descriptors can easily be detected with other
tools (like netstat or /proc file system).
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
In some cases mouse_mode is a bit field.
However for this structure is used always as a boolean
value.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
This field was used just to store a value and retrieve again
while we can just pass it instead.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Setting the capability is not enough, each stream must be enabled
so do so if client support them.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Do not allow the guest to fill host memory.
Also having a huge queue mainly cause to have a higher video
latency.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
This allows a better id allocation as devices are created after
fixed ones.
Also will allow to support more easily multiple monitor.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
When guest close the device the host device has to be reset too.
This make easier to restart the guest device which can happen in case
of reboot, agent issues or if we want to update the agent.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Currently, red_char_device_reset() stops the device, clears all pending
messages, and clears its device instance. After this function is called,
the char device will not work again until it is assigned a new device
instance and restarted. This is fine for the vdagent char device, which
is currently the only user of this function. But for the stream device,
we want to be able to reset the char device to a working state (e.g.
clear all pending messages, etc) without stopping or disabling the char
device. So this function will now only reset the char device to a clean
working state, and the _stop() and _reset_dev_instance() calls will be
moved up to the caller.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Start showing something when we have a surface and stream
instead of showing a blank screen which is now not useful.
Was useful for debugging purposes to understand that the
new channel was sending messages correctly to client and
client could handle them.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
When a new client is connected we must restart the stream so new
clients can receive correct data without having to wait for the
next full screen (which on idle screen could take ages).
On disconnection we should tell the guest to stop streaming
not wasting resources to stream not needed data.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
The channel needs to communicate when it receive a new
stream request from the guest.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Remove the fixed size stream and support any display size.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Handle stream data from device sending to the channel.
The StreamChannel will forward the data to the clients using standard
DisplayChannel messages, and will create and destroy streams as
necessary.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
So can be used by the device to communicate with the clients.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Currently only compile, not used and not much sense
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Parse the data sent from the guest to the streaming device.
At the moment, the data is simply discarded after it is parsed.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Add a stub device in guest.
The aim of this device is to make it possible for the guest to send a
stream through a DisplayChannel (in the sense of protocol channel).
This stub allows the guest to send some data and you can see some debug
lines of data arrived on host logs.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
This allows the server to add channels after the client is connected.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
This function does not make much sense anymore.
Is called by RedVmcChannel which doesn't use RedChannelClient ACKs
so the variable changed are not used.
Moreover, at red_vmc_channel_constructed() time, there will be no
clients yet, so red_channel_init_outgoing_messages() will be a no-op.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Prevent possible buffer reading overflow.
Note that message pointer must be valid and data are checked
value by value so even on overflow you just get an error.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
