Currently modifier keys (ctrl, alt) can get stuck when using the x11 client.
To reproduce under gnome:
-focus the client window without causing it to grab the keyborad (click on
the title bar not the window)
-press crlt + alt + right arrow to switch virtual desktop
-press crlt + alt + left arrow to switch back
-notice ctrl + alt are stuck pressed
What is happening here is:
-We get a focus out event, caused by the hotkey combi key grab, focus event
notify mode == NotifyGrab, and release all keys -> good
-We get another focus out event, as we really loose the focus.
notify mode == NotifyWhileGrabbed, which we ignore as we already lost
focus before
-We get a focus in event, as the focus is returning to us, but we don't
really have the focus yet, as the hotkey combi key grab is still active
(ie ctrl + alt are still pressed).
We now sync the vm's modifier key state with the current X-server state,
telling the vm ctrl + alt are pressed. Note we do this by directly reading
the X-server keyboard status, we are not getting any key press events from the
X-server -> bad
-We get another focus in event, as we really get the focus back,
notify mode == NotifyUngrab. We ignore this one as already have gained the
focus before. If we were to sync the vm modifier state here, all would be
well we would no longer see the modifier keys pressed, or if we would we
would get a release event when they get released (testing has shown both).
The solution here is to ignore the first focus in event, and do the modifier
sync on the second focus in event, or more in general to ignore focus events
where notify mode == NotifyWhileGrabbed.
Currently when compiled with the gui enabled if you specify a host to connect
to on the cmdline the gui flashes by (show_gui gets called, then the connect
handler calls hide_gui as soon as the connection is made).
This patch removes this ugly flashing by of the gui.
Currently we are calling show_info_layer from hide_gui in application.cpp, but
there are 2 cases where this does not happen:
1) When compiled without gui support hide_gui is a complete nop, so we never
show the info layer when compiled without gui support
2) When run with --controller we never show the gui, and hide_gui
checks if there is a gui to hide as the first thing and if not returns
resulting in show_info_layer not being called, and thus the info layer
not showing when launched from the xpi
This patch fixes both by adding a call to show_info_layer from
on_visibility_start note that on_visibility_start also calls hide_gui,
so in some cases show_info_layer may be called twice, this is not a
problem as show_info_layer is protected against this.
We are making all text send over the controller socket utf-8, rather then
having somethings as 8 bit (hostname) and others (title, menu) unicode16,
this patch completes this change by converting the menu handling.
The activex browser plugin is sending unicode16 text, where as the
xpi one is sending utf8 text. After discussing this on irc we've decided
that utf8 is what we want to use. So the client (this patch), and the
activex will be changed to expect resp. send utf8 text as the title.
The socket name used to communicate between the xpi browser plugin and the
spicec was predictable allowing a non priviliged user on the same system
to create the socket before spicec does and thus intercept the messages from
the xpi to the client, including login credentials. This security vulnerability
has been registred with mitre as CVE-2010-2792:
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2010-2792
This patch changes the controller code to instead read the socket name
from an environment variable which gets set by the xpi before executing
the spicec, making the socketname private between the client and the xpi.
Note that this means that the controller will only work with an xpi which
has matching changes, the changes are present in the latest version of the
xpi as available as update for / with RHEL-5.5 and RHEL-6.0 .
Now that Application::hide_me actually does what the name suggests
(hide the entire client, ie all client windows), the gui using it to
not show the gui layer leads to the entire client disappearing when
one presses close in the GUI or dismisses a GUI dialog. This patch makes
the GUI code call hide_gui instead of hide_me, fixing this.
There were 2 issues with window management under KDE
1) When an app does its own focus management like we do, kwin expects
an explicit raise for the app to get to the top, so we did have focus,
but would have other windows (partially) covering the client window
-> do a raise after setting focus to ourselves
2) When switching from fullscreen <-> window, we unmap and remap our
window, then set focus to ourselves. kwin thinks this means we're trying
to steal the focus without the user asking for it. This patch makes us
set the _NET_WM_USER_TIME property on our window, this helps kwin's
focus stealing code to see that we are really not stealing the focus,
just responding to a user event.
1) Make the order when starting up in fullscreen mode the same as when
switching from window -> fullscreen:
First set the mode, then make the window fullscreen
2) Change the order when leaving fullscreen mode, first restore the original
monitor mode, then make the window non fullscreen. Changing the monitor
mode in X11 causes the window manager to re-arrange windows, and if this
happens while compiz is busy mapping the window it gets confused and
maps the window with a maxmimized size.
Some window managers will ignore the fullscreen hint, unless WmSizeHints
allow them to resize the window so that they can give it the size of
the roo-window. This fixes fullscreen mode in compiz.
XRRSet* calls wait for a XReply, so add a missing XLockDisplay,
this fixes a hang (due to a race so not always) when switching between
windowed and fullscreen mode.
Currenty, we check the agent caps in RedClient::handle_agent_connected
for VD_AGENT_CAP_DISPLAY_CONFIG and if present send display_config, but at
this time we have not received the caps yet, so remove this.
Also the send_agent_display_config call in on_agent_announce_capabilities
lacks a check for _agent_disp_config_sent, and we send the display config
before announcing that we may do so by sending our own caps, which seems
inpolite.
Spice client controller enables external control (e.g., by XPI or ActiveX) of
the client functionality.
The controller protocol enables setting parameters (host, port, sport, pwd,
secure channels, disabled channels, title, menus, hotkeys etc.), connecting
the server, showing and hiding the client etc.
The controller is based on the cross-platform named pipe.
Spice foreign menu enables external control of the client menu.
The foreignmenu protocol enables an external application to:
add a submenu, set its title, clear it, add/modify/remove an item etc.
Foreign menu is based on the cross-platform named pipe.
The use of epoll in the client is totally overkill in terms of
scalability, and its a problem for portability. The OSX port converts
this to use select, but keeps some of the old complexities in the code.
This new patch makes it simpler and look much more like the windows
code.
Since libX11-1.3.4 the multi-threading handling code of libX11 has been
changed, see:
http://cgit.freedesktop.org/xorg/lib/libX11/commit/?id=933aee1d5c53b0cc7d608011a29188b594c8d70b
This causes several issues. One of them is the display inside the
client not getting updated when there are no XEvents being generated,
this is caused by the following part of the referenced commit message:
Caveats:
- If one thread is waiting for events and another thread tries to read a reply,
both will hang until an event arrives. Previously, if this happened it might
work sometimes, but otherwise would trigger either an assertion failure or
a permanent hang.
We were depending on the otherwise behavior and apparently were lucky.
This can be seen by starting F14 in runlevel 3 and then doing startx
and not touching the mouse / keyb afterwards. Once you move the mouse
(generate an event you see the UI contents being updated but not before.
Another thing both I and Alon (iirc) have seen are hangs where 2
threads are stuck in XSync waiting for a reply simultaneously. This might
be related to libxcb version, according to the libX11 commit a libxcb
newer then 1.6 was needed, and my system had 1.5 at the time I saw this
after updating to libxcb 1.7 I can no longer reproduce.
This patch tackles both problems (and is needed for the 1st one
indepently of the 2nd one possibly being fixed) by adding XLockDisplay
calls around all libX11 calls which wait for a reply or an event.
Without this patch spicec reproducely hangs in
GlzDecoderWindow::pre_decode_update_window().
When GlzDecoderWindow::will_overflow() returns true,
GlzDecoderWindow::pre_decode_update_window(),
waits for a call to GlzDecoderWindow::post_decode()
to free up some memory
This happens even though there still is pci memory
available (otherwise the driver would not have
been able to send an image to decode in the first
place).
The GlzDecoderWindow::post_decode() call never happens
as the server is waiting for a reply to the decode
of the hanging image, causing the client to hang
for ever.
This patch fixes this by simply removing the
"attempted" pci memory accounting. As there is no
need for that, as the driver already must keep
track of pci memory usage.
I've verified that both the old and new Xorg drivers
take care of not overusing the pci memory themselves
I would expect the same to be true for the windows
driver.
Note the calculating of the glz_window_size in
red_client.cpp cannot be removed as the calculated
value is send as part of the SpiceMsgcDisplayInit on
connect.
Every time an events comes past where the Window is None (which happens
about once every 5 minutes or so), this annoying "invalid window" message
gets printed. Remove it!
ClipboardListener callbacks can run from another thread then the
main channel loop thread, where agent messages are normally dispatched from.
So they may not send agent messages directly, instead they should post
events to the main channel loop.
Well almost remove it, it was possible that another x11 app would acquire
selection ownership, and we would receive a release message from the
agent before having processed the xselection ownership change event.
Then we would set the selection owner to none, overriding the new owner.
As the comment in the patch indicates there still is a minute window left
where something similar can happen after this patch. Nothing we can do
about that (I blame the libX11 selection API).
Atleast under x11 there is a race condition when setting the clipboard
owner to guest from the RedClient code rather then doing it in Platform.
After the XSetSelectionOwner() in Platform::on_clipboard_grab(), which runs
from the main message loop thread, the x11 event thread can receive a
SelectionRequest event from another x11 app, before the RedClient code
has set the clipboard owner, which will trigger the owner != guest
check in the SelectionRequest event handling code.
By moving the setting of the owner in to Platform::on_clipboard_grab() it
gets protected by the clipboard lock, which closes this tiny race.
