red_display_marshall_stream_start initializes a
SpiceMsgDisplayStreamCreate structure before marshalling it and
sending it on the wire. However, it never fills
SpiceMsgDisplayStreamCreate::stamp which then causes a complaint
from valgrind. This patch sets this value to 0, it's not used
by the client so the value shouldn't matter.
create_test_primary_surface::test_display_base.c creates a
QXLDevSurfaceCreate structure and initialize it, but doesn't set
the position field. Moreover, this structure has 4 bytes of padding
to the end (as shown by pahole from dwarves), so initialize the whole
structure to 0 before using it.
Issue found by the Coverity scanner.
HDG: Fixup don't free RGB24_line if it was not allocated by do_jpeg_encode
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
While discussing various things with Alon in Vancouver, it came up that
having a channel which simply passes through data coming out of a qemu
chardev frontend unmodified, like the usbredir channel does, can be used
for a lot of other cases too. To facilitate this the usbredir channel code
will be turned into a generic spicevmc channel, which is just a passthrough
to the client, from the spicevmc chardev.
This patch renames usbredir.c to spicevmc.c and changes the prefix of all
functions / structs to match. This should make clear that the code is not
usbredir specific.
Some examples of why having a generic spicevmc pass through is good:
1) We could add a monitor channel, allowing access to the qemu monitor from
the spice client, since the monitor is a chardev frontend we could re-use
the generic spicevmc channel server code, so all that is needed to add this
(server side) would be reserving a new channel id for this.
2) We could allow users to come up with new channels of their own, without
requiring qemu or server modification. The idea is to allow doing something
like this on the qemu startup cmdline:
-chardev spicevmc,name=generic,channelid=128
To ensure these new "generic" channels cannot conflict with newly added
official types, they must start at the SPICE_CHANNEL_USER_DEFINED_START value
(128).
These new user defined channels could then either be used with a special
modified client, with client plugins (if we add support for those), or
by exporting them on the client side for use by an external ap, see below.
3) We could also add support to the client to make user-defined channels
end in a unix socket / pipe, allowing handling of the data by an external app,
we could for example have a new spice client cmdline argument like this:
--custom-channel unixsocket=/tmp/mysocket,channelid=128
This would allow for something like:
$random app on guest -> virtio-serial -> spicevmc chardev ->
-> spicevmc channel -> unix socket -> $random app on client
4) On hind sight this could also have been used for the smartcard stuff,
with a 1 channel / reader model, rather then the current multiplexing code
where we've our own multiplexing protocol wrapper over the libcacard
smartcard protocol.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Now that the Channel struct is gone and the RedChannel has the same lifetime
as the chardev interface there is no need to have these 2 separate.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes a valgrind discovered possible bug in spice-server - valgrind on
test_playback saw it, didn't see it happen with qemu.
The problem is that the frames buffers returned by spice_server_playback_get_buffer
are part of the malloc'ed SndChannel, whose lifetime is smaller then that of SndWorker.
As a result a pointer to a previously returned spice_server_playback_get_buffer could
remain and be used after SndChannel has been freed because the client disconnected.
Merging the functionality of reds::channel, into RedChannel.
In addition, cleanup and fix disconnection code: before this patch,
red_dispatcher_disconnect_display_client
could have been called from the red_worker thread
(and it must be called only from the io thread).
RedChannel holds only connected channel clients. RedClient holds all the
channel clients that were created till it is destroyed
(and then it destroys them as well).
Note: snd_channel still doesn't use red_channel, however it
creates dummy channel and channel clients, in order to register itself
in reds.
server/red_channel.c: a channel is connected if it holds at least one channel client
Previously I changed RedChannel to hold only connected channel clients and
RedClient, to hold all the channel clients as long as it is not destroyed.
usbredir: multichannel has not been tested, it just compiles.
client_cbs are supposed to be called from client context (reds). This patch will be used
in future patches for relacing reds::Channel with RedChannel in order to eliminate redundancy.
introduces ref_red_drawable and put_red_drawable (rename from free_red_drawable)
RedDrawable is already references by Drawable and RedGlzDrawable, with
a hack to NULL the drawable field in RedGlzDrawable to indicate RedGlzDrawable
is the last reference holder. Using an explicit reference count instead.
CursorPipeItems and their corresponding cursor_item were not
freed when they were removed from the pipe without sending them.
In addition cursor_channel_hold_pipe_item used wrong conversion
to (CursorItem*) for a (CursorPipeItem*).
Required to support multiple clients.
Also changes somewhat the way we produce PIPE_ITEM_TYPE_LOCAL_CURSOR. Btw,
I haven't managed to see when we actually produce such an item during my
tests.
Previously we had a single pipe item per CursorItem, this is impossible
with two pipes, which happens when we have two clients.
Also adds Drawable pipes and glz rings.
main_channel and red_worker had several locations that still accessed rcc
directly, so they had to be touched too, but the changes are minimal.
Most changes are in red_channel: drop the single client reference in RedChannel
and add a ring of channels.
Things missing / not done right in red_worker:
* StreamAgents are in DCC - right/wrong?
* GlzDict is multiplied - multiple compressions.
We still are missing:
* remove the disconnect calls on new connections
There is no inter-client shared dictionary and cache yet.
At this point the display channel can be used by multiple clients.
You can still crash on lack of Drawables or CursorItems due to the slower
clients pipe growing uncontrollably.
This patch compiles but breaks spice.
Split both display and cursor channels to a client part and channel part.
Introduce DisplayChannelClient, CursorChannelClient, CommonChannelClient.
don't disconnect channel on client disconnect.
Move all caches to the ChannelClient's.
Remove reference counting of the channel.
No new functionality introduced.
NOTE: Introduces a crash in disconnections, a regression, resulting from
incorrect thread access, that is fixed in the patch titled:
"server: registering RedChannel in reds, instead of Channel"
each client supplying a smartcard channel gets it's own smartcard. If
there are not enough smartcards provided by the server (read: qemu)
then it will be as though there are none.
currently disabled - later patches that enable smartcard don't make
this channel available to any but the first client.
s/TunnelChannel/TunnelChannelClient/
That's about it. this is probably the wrong way to do it. Not tested
at all. What do we want, a separate interface per client? same interface
for all clients? probably the later. This doesn't do that. Not tested,
so probably doesn't even work.
changes red_channel_pipe_item_is_linked to red_channel_client_pipe_item_is_linked,
since tunnel channel is the only user, must be done in patch to not break compilation.
The main channel deals with connecting new clients, announcing mouse mode
changes, and the agent channel. The implementation is currently done without
any changes to the protocol, so everything has to be either broadcast or
to a specific client.
channels list - specific client
mouse mode - broadcast
agent - broadcast
notify - broadcast (should have two modes, and use the appropriate)
Notable TODOs:
* migration testing
* agent tokens are wrongly sent (or did I fix that? check)
Introduce functions to add (via producer method) the same item to multiple
pipes, all for the same channel.
Note: Right now there is only a single channel, but the next patches will do the
per-channel breakdown to channel and channel_client before actually introducing
a ring in RedChannel, this makes it easier to make smaller changes - the
channel->rcc link will exist until removed in the ring introducing patch.
on red_channel_peer_on_incoming_error, if we are already shutdown, do not
call the channel's error handler. Since the channel has been shutdown, we
assume this is a second or later error, and handling has already occured.
Expose additional api to find a client given a connection_id. The connection_id
is first set when the first channel connects, which is the main channel.
It could also be kept in the RedClient instead, not sure.
TODO:
multiple todo's added for multiclient handling. I don't remember why
I wrote them exactly, and besides if I did any migration tests. So: TODO.
cleanup only. Note that the ping function is half used since the opt parameter
stopped being called with anything but NULL, should be returned at some point,
specifically when we drop the 250kbyte ping on start and do a continuous check
for latency and bandwidth.
See:
81945d897 - server: add new vd interface QTerm2Interface, Yaniv Kamay
introducing the usage of ping with a non NULL opt
3f7ea8e7a - zap qterm interfaces, Gerd Hoffman
removing it
They were globals before. This introduces api for other channels
to query the low bandwidth status. The queries themselves are still done
from the wrong context (channel and not channel client) but that's because
the decoupling of channel and channel client will be done in the following
patches.
Note that snd_worker.c got two copied function declarations that belong to
main_channel.h but can't be easily dragged into snd_worker.c since it still
uses it's own RedChannel struct.
Secondary channels are those that don't support multiple clients. The
support added in this patch just doesn't let the second or more connected
client receive the unsupported channels in the channels list sent by the
server to the client. This doesn't handle the situation where:
client A connects (gets all channels)
client B connects (gets supported multiple client channels)
client A disconnects (Suboptimal 1: B doesn't get new channels at this point)
client C connects (Suboptimal 2: C doesn't get the full list of channels, but
the partial one)
Specifically the channels that only support a single client are:
sound (both playback and record channels)
smartcard
tunnel
