The channel needs to communicate when it receive a new
stream request from the guest.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Remove the fixed size stream and support any display size.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Handle stream data from device sending to the channel.
The StreamChannel will forward the data to the clients using standard
DisplayChannel messages, and will create and destroy streams as
necessary.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
So can be used by the device to communicate with the clients.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Currently only compile, not used and not much sense
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Parse the data sent from the guest to the streaming device.
At the moment, the data is simply discarded after it is parsed.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Add a stub device in guest.
The aim of this device is to make it possible for the guest to send a
stream through a DisplayChannel (in the sense of protocol channel).
This stub allows the guest to send some data and you can see some debug
lines of data arrived on host logs.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
This allows the server to add channels after the client is connected.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
This function does not make much sense anymore.
Is called by RedVmcChannel which doesn't use RedChannelClient ACKs
so the variable changed are not used.
Moreover, at red_vmc_channel_constructed() time, there will be no
clients yet, so red_channel_init_outgoing_messages() will be a no-op.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Prevent possible buffer reading overflow.
Note that message pointer must be valid and data are checked
value by value so even on overflow you just get an error.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Since commit ef4b1bdb "red-channel-client: Prevent too tight loop
waiting for ACKs", after seamless migration, the display is no longer
updated on the client-side, even though the VM is functional (responds
to keyboard input, reconnecting the client restores the display
functionality, ...).
This is mainly caused because after migration,
red_channel_client_waiting_for_ack() will be true until
red_channel_client_ack_zero_messages_window() is called.
What happens is the following:
The dcc is created, and dcc_start() pushes a RED_PIPE_ITEM_TYPE_SET_ACK
message.
This calls prepare_pipe_add(), which will enable write event on the dcc
watch. red_channel_client_event() will be called, which will trigger a
red_channel_client_push(). Since red_channel_client_waiting_for_ack()
returns true, we won't get any item to push, and (because of commit
ef4b1bdb), we will disable write notifications on the watch.
At this point, rcc->priv->pipe is no longer empty, so prepare_pipe_add()
is not going to reenable the write notifications.
Then red_channel_client_ack_zero_messages_window() is finally called as
part of dcc_handle_migrate_data(), so from this point on,
red_channel_client_waiting_for_ack() is no longer true.
However, nothing ever reenables WRITE events, nor empties
rcc->priv->pipe, so nothing ever gets pushed, causing no display updates
at all after a migration, even if the VM is functional (input, ...)
apart from that.
This commit reenables WRITE events in
red_channel_client_ack_zero_messages_window() if we were waiting for
ack.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Since 2.8, QEMU no longer creates QXL primary surfaces when using GL.
This change broke client-side mouse mode, because Spice server relies on
having a primary surface.
When GL is enabled, use GL scanout informations.
Mouse mode is always client when GL surfaces are used.
This patch and most of the message are based on a patch from
Marc-André Lureau, just moving responsibility from reds to RedQxl.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Acked-by: Christophe de Dinechin <dinechin@redhat.com>
Currently, the port used by most tests is hardcoded to 5912. However,
the test suite can be run in parallel, so if 2 tests run in parallel,
the 2nd one is not going to be able to bind to port 5912 and will fail.
After this commit, test_new() will try to find a free port between 5912
and 5922 and will abort if it can't find any.
The issue can be reproduced by adding a usleep(1000000) to the beginning
of test_destroy().
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Start reducing the usage of spice_new*/spice_malloc allocations.
They were designed in a similar way to GLib ones.
Now that we use GLib make sense to remove them.
However the versions we support for GLib can use different memory
allocators so we have to match g_free with GLib allocations
and spice_* ones (which uses always malloc allocator) with free().
This patch remove some easy ones.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
