Add a new 'HAVE_LZ4' automake conditional to really tell if we have the
dependency installed on the system. It will later be used in Makefile to
decide whether or not the specific files related to LZ4 should be built.
Signed-off-by: Eduardo Lima (Etrunko) <etrunko@redhat.com>
Compressed message type is CompressedData which contains compression
type (1 byte) followed by the uncompressed data size (4 bytes-exists
only if data was compressed) followed by the compressed data
Update the required protocol to 0.12.12:
Signed-off-by: Snir Sheriber <ssheribe@redhat.com>
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
On Windows long is always 32 bit so under x64 the cast from pointer to
"unsigned long" cause a warning.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
No need to keep API compatibility in spice-common.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Marc-André Lureau <mlureau@redhat.com>
Without this, the demarshalling code does not know we expect exactly
SpiceMsgSmartcardData::length bytes, and has to guess it from the
amount of data which was sent
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
The loop (for (;;)) will be executed only once, so, no reason for
keeping it.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
len is overwritten in the match label with the value from
"ip - anchor".
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
All decompress functions used after this check take into account that
encoder->palette is not NULL. So, if we already detected that the
palette is NULL, let's just return early.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
It is used in canvas_get_lz4() which is guarded by USE_LZ4, and
in canvas_get_lz() which is guarded by SW_CANVAS_CACHE.
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
SPICE_COMMON_{CFLAGS,LIBS} references '$(GL_{CFLAGS,LIBS)', so these
variables are going to be expanded at 'make' time rather than at
'configure' time.
The linker flag and the compiler flag won't be substituted in the
generated Makefile without AC_SUBST.
It causes spice-gtk building failure with --enable-opengl option.
The patch fixes this issue.
Signed-off-by: Lin Ma <lma@suse.com>
LZ image decompression was broken for 16 bpp:
- stride was computed not computed correctly (as width*4). This caused
also a buffer underflow;
- stride in pixman is always multiple of 4 bytes (so for 16 bpp is
ALIGN(width*2, 4)) so image decompressed by lz_decode as some missing
bytes to be fixed.
The alignment code is reused from LZ4 function.
This fix also https://bugzilla.redhat.com/show_bug.cgi?id=1285469.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Pavel Grunt <pgrunt@redhat.com>
While testing spice-server on EL6, I was getting random crashes in the
glib logging code because g_logv was called recursively even though this
was not visible in a backtrace.
It turns out on older glib versions (EL6 has 2.28), g_logv is not
thread-safe unless g_thread_init() is called first. If g_thread_init()
is not called, the GMutex/GPrivate calls g_logv makes are turned into
no-ops, which is going to cause the recursion issue I was seeing.
This commit adds a call to g_thread_init() for these older glib
versions.
(gdb) bt
0x7fff9f9fb110 "item.type: 114", unused_data=0x0) at gmessages.c:863
format=0x7ffff50e72ac "item.type: %d", args1=0x7fff9f9fb640) at gmessages.c:517
SPICE_LOG_LEVEL_DEBUG, strloc=0x7ffff50e72ba "dcc.c:1652", function=
0x7ffff50e7320 "release_item_before_push", format=0x7ffff50e72ac "item.type: %d", args=
0x7fff9f9fb640) at log.c:163
SPICE_LOG_LEVEL_DEBUG, strloc=0x7ffff50e72ba "dcc.c:1652", function=
0x7ffff50e7320 "release_item_before_push", format=0x7ffff50e72ac "item.type: %d") at log.c:195
at dcc.c:1652
at dcc.c:1719
at dcc-send.c:2450
at red-channel.c:578
at red-channel.c:1587
at event-loop.c:122
0x7ffff4fb2ef2 <watch_func>, user_data=0x7fff980244e0) at giounix.c:166
0x7ffff86ec770) at gmain.c:3092
This was done through a GOnce called every time spice_log() is called,
now it will always be called at spice-server startup.
This means the unit test needs to be updated as SPICE_DEBUG/ABORT_LEVEL
must now be set before the process starts up rather than before the
first spice_log call, and the deprecation warning these environment
variables trigger cannot be caught using g_test_expect_message() as
they are output before g_test_init() is called.
Tests now include functions only available in glib 2.38. To avoid
setting the dependency bar too high, we simply put them between #ifdef
guards.
Signed-off-by: Eduardo Lima (Etrunko) <etrunko@redhat.com>
Avoid having to call function at runtime to inialize static.
Old functions are defined as deprecated for compatibility.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Pavel Grunt <pgrunt@redhat.com>
Allow to define functions executed at program/shared object initialization
or close.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Victor Toso <victortoso@redhat.com>
Fatal error exit usually with abort() causing SIGABRT to be triggered
which can have problems with core dump generation depending on system
settings. Capturing and exiting on this signal solve the problem.
This is a workaround to some system configurations which could cause
test to fail.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Clients that support multiple codecs must advertise the
SPICE_DISPLAY_CAP_MULTI_CODEC capability and one
SPICE_DISPLAY_CAP_CODEC_XXX per supported codec.
Signed-off-by: Francois Gouget <fgouget@codeweavers.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
(cherry picked from spice-protocol commit 7937915d67702a5c4b5147b277c432f5555e3852)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Add 2 new messages to the display channel to stream pre-rendered GL
images of the display. This is only possible when the client supports
SPICE_DISPLAY_CAP_GL_SCANOUT capability.
The first message, SPICE_MSG_DISPLAY_GL_SCANOUT_UNIX, sends a gl image
file handle via socket ancillary data, and can be imported in a GL
context with the help of eglCreateImageKHR() (as with the 2d canvas, the
SPICE_MSG_DISPLAY_MONITORS_CONFIG will give the monitors
coordinates (x/y/w/h) within the image). There can be only one scanount
per display channel.
A SPICE_MSG_DISPLAY_GL_DRAW message is sent with the coordinate of the
region within the scanount to (re)draw on the client display. For each
draw, once the client is done with the rendering, it must acknowldge it
by sending a SPICE_MSGC_DISPLAY_GL_DRAW_DONE message, in order to
release the context (it is expected to improve this in the future with a
cross-process GL fence).
The relation with the existing display channel messages is that all
other messages are unchanged: the last drawing command received must be
displayed. However the scanout display is all or nothing. Consequently,
if a 2d canvas draw is received, the display must be switched to the
drawn canvas. In other words, if the last message received is a GL draw
the display should switch to the GL display, if it's a 2d draw message
the display should be switched to the client 2d canvas.
(there will probably be a stipped-down "gl-only" channel in the future,
or support for other streaming methods, but this protocol change should
be enough for basic virgl or other gpu-accelerated support)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
(cherry picked from spice-protocol commit 3fc2221e965623c5a7e50d95f1623269a067c2d3)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
No need to use an uint8 typed member, we can directly use the
appropriate enum8 type here, which makes everything more explicit.
(cherry picked from spice-protocol commit 8a3def14e35039753097094ba356e85e8fc2d128)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Re-using the SPICE_IMAGE_COMPRESS_ prefix in newer spice-protocol
releases is going to cause issues as there will be clashing enum members
in older spice-server releases. Using SPICE_IMAGE_COMPRESSION_ as a
prefix sidesteps these backward compability issues.
(cherry picked from spice-protocol commit e857cd9a378cdf56805b64284491a12af93a7cbf)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This patch is a left-over from the fd passing commit 267391c8fd as
suggested by Frediano Ziglio during review.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
(cherry picked from spice-protocol commit 47076559628d71c128e14e11147ce36b92677885)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Add a new type, "unix_fd", used to describe file descriptor sharing via
socket ancillary data (these messages are local only).
The marshaller/demarshaller can't serialize this in memory (consume_fd
implementation is empty), so it is the responsability of the marshaller
user to handle sending and receiving the handles, which are appended at
the end of the message with an extra stream byte (because some Unix
requires sending at least a byte with ancillary data).
Even if there is no fd to send (or if the fd is invalid etc), the
receiver side expects an extra byte anyway.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
(cherry-picked from spice-protocol commit 267391c8fd7c90c067b3e4845ff0227a2580e2e2)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This reverts commit 7665dcf1bb.
Also revert the related build-sys changes to fix the build.
codegen generated code depends on spice-common code (marshaller,
messages etc), it makes more sense to keep the generator along
this. Otherwise a newer protocol release will fail to build older
projects.
*.proto files are required as well, since it generates code that parent
modules depend on unconditionnaly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This test is sensitive to G_MESSAGES_DEBUG variable. Make it insensitive
by unsetting the environment variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
In some cases, it might be worth to be able to send a message with a -1
fd, has the protocol permits. Change add_fd/get_fd in order to track
if the caller wanted to send -1.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Code is in the slow path, this reduce space needed for data+code.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
avoid to compute the string length twice and use memcpy instead of
strcpy which is faster not having to check for terminator.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Actually not causing problems as when used is always followed by another
terminator but better to fix the definition.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
