instead of blessing a passed-in config and returning it, explicitly only bless
without returning to make it more obvious to callers that this affects the
argument.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
For PBS, templates are started in 'prelaunch' mode for backup and the
same can be done for VMA for consistency.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Previously, the template's configuration was used as-is for the rest
of handling the VM start even if config_to_command() uses a minimized
configuration to build the command. This can lead to issues with a
network device with the 'link_down' flag set, because the network
device will not be present, but the start handling will still issue a
QMP command for it, leading to a failed backup operation.
Use the minimized configuration for the whole start-up handling to
avoid such issues.
Use the special QemuConfig::NoWrite class to safeguard against
accidentally writing out the temporarily modified config.
Suggested-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
To be used in the context of template backup, where a minimized
temporary configuration is created to start the VM in 'prelaunch'
mode. Issue a warning, so that code paths where this happens will be
noted and can be evaluated and adapted.
Since the code currently doesn't use blessed config objects, special
dispatching is needed to potentially defer to the new child class in
the write_config() method.
Suggested-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Suggested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
A failure during enforce_vm_running_for_backup() would result in
restore_vm_power_state() not being called, but the VM might already
have been started before the failure. In particular, this could happen
in the context of bug #6007 [0], where the 'set_link' QMP command
fails right after VM start.
If the failure happens before successful start, there will be an
additional error message issued by restore_vm_power_state() (that the
VM is not running). This could be avoided by returning early if the VM
is not running anymore, but that would mean not warning about it in
other scenarios where it is not expected and keeping track of whether
the VM was actually started or not does not seem to be worth it just
for avoiding that error message in this edge case.
[0]: https://bugzilla.proxmox.com/show_bug.cgi?id=6007
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Template-VMs might be started in 'prelaunch' state when creating a
backup, but they must never be actually started fully, to avoid
modifying their disks.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Fixes device hotplug in combination with QEMU 9.2.
QEMU commit be93fd5372 ("qdev-monitor: avoid QemuOpts in QMP device_add")
notes:
> This patch changes the behavior of QMP device_add but not HMP
> device_add. QMP clients that sent incorrectly typed device_add QMP
> commands no longer work. This is a breaking change but clients should be
> using the correct types already.
The qemu_deviceadd() helper does not have the required type
information right now, so switch to using HMP, which still behaves the
same when passing a device commandline string. QEMU commit be93fd5372
fixes passing in complex properties via JSON, but the qemu_deviceadd()
helper never uses any such, as it already only received a string (and
naively split it up).
Use HMP for 'device_del' too, simply to keep the qemu_deviceadd() and
qemu_devicedel() helpers consistent.
Switching back to QMP using the correct types in the JSON can still be
done later. Unfortunately, 'qmp-query-schema' does not provide
device-specific types, so another way is needed.
A timeout of 25 seconds is used rather then relying on the low default
like before, since device plug operations require actions by the guest
kernel and might require IO. Device plug is often an interactive
operation, so a too high timeout could lead to bad UX. For now stay a
few seconds under the default timeout of 30 seconds of our web UI's
API request handler. Should specific devices need a higher timeout, it
can still be increased further for them in the future.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
[TL: reduce timeout from 30s to 25s to ensure sync API requests
(without a task worker) do not run into the frontend timeout]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Commit c8ed1ac2 ("api: create disks: live import: use format from
storage layer") broke live import from an OVA containing a disk,
because a combined format like 'ova+vmdk' was used for the live-import
disk mapping, leading to failure:
> invalid format 'ova+vmdk' for 'scsi0' mapping
There was also an informational message about the confusion earlier:
> file_size_info: '/mnt/pve/dir/images/135/vm-135-disk-0.vmdk': \
> falling back to 'raw' from unknown format 'ova+vmdk
Fixes: c8ed1ac2 ("api: create disks: live import: use format from storage layer")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
While no problem is known with having an empty machine string in the
configuration and it was already possible setting an empty machine
manually via 'qm set', the behavior changed because of commit 919e69d0
("machine: add check_and_pin_machine_string() helper") and there is
potential for problematic edge cases. Restore the previous behavior.
Pinning is also required when there is no given machine type, so the
call to check_and_pin_machine_string() should stay unconditional.
For update, pinning was recently added by commit 7a9570f3 ("api:
update vm config: pin machine version when switching to windows os
type"), so bring that in-line with the behavior for create too.
Another idea would've been to just return the default machine in
check_and_pin_machine_string(), but that would also be a change in
behavior. In particular, the default depends on the arch, so an empty
machine type will pick the default machine for the currently
configured arch even when the arch is later changed.
Reported-by: Daniel Herzig <d.herzig@proxmox.com>
Fixes: 919e69d0 ("machine: add check_and_pin_machine_string() helper")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
While the path for changing a CD-ROM medium was already consistent
with the path for an already inserted CD-ROM at VM start, i.e. the one
from print_drive_commandline_full(), this makes that fact more
explicit. While at it, make sure the format is also consistent with
how it is determined in print_drive_commandline_full(). Do the same
for cloud-init drives, which often are in non-raw format.
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Tested-by: Friedrich Weber <f.weber@proxmox.com>
To allow re-using it for CD-ROM hotplug.
No functional change intended.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Tested-by: Friedrich Weber <f.weber@proxmox.com>
This was the only user of List::Util, so move that too.
No functional change intended.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Tested-by: Friedrich Weber <f.weber@proxmox.com>
During virtual machine creation, the machine version is pinned when
the guest OS is Windows. The same should be done when the guest OS
type is newly set to Windows for consistency.
NOTE RFC
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Extract the logic for guest OS-type dependent machine version pinning
into a dedicated helper, so it can be re-used.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Starting from QEMU creation version 9.1, pin to the creation version
instead. Support for machine version 5.1 is expected to drop with QEMU
11.1 and it would still be good to handle Windows VMs that do not have
explicit machine version for whatever reason. For example, explicitly
setting the machine without a version on the CLI/API after creation is
one way to end up with such a machine.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Like this, it can be used by modules that cannot depend on
QemuServer.pm without creating a cyclic dependency.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
There are already other places where 'aarch64' and 'x86_64' are
checked to be the only valid architectures, for example, the
get_command_for_arch() helper, so the new error scenario for an
unknown arch should not cause any regressions.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Add an export, since the function is rather commonly used (in
particular inlined in function calls, where prefixing with the module
name would hurt readability) and there won't be much potential for
confusion name-wise.
This was the only user of stat(), so remove the File::stat include.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Cannot use the is_native_arch() helper inside the function anymore,
to avoid a cyclic dependency between the 'CPUConfig' and 'Helpers'
modules, inline it.
While at it, improve the variable name for the mapping.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
The commit 37a1f42a introduced a conversion step for newly allocated
volume disks to base volumes for VM templates. This wrongly excluded
efidisk and tmpstate volumes from this conversion, even though those
should be converted to base volumes too.
Therefore, include efidisks and tpmstate volumes to be converted to base
volumes when newly allocating them.
Suggested-by: Fiona Ebner <f.ebner@proxmox.com>
Fixes: 37a1f42a ("fix #5301: convert added volume disks to base images for templates")
Signed-off-by: Daniel Kral <d.kral@proxmox.com>
Fixes a small typo and uses the same wording as used in pve-container's
description of the `mem` property.
Signed-off-by: Daniel Kral <d.kral@proxmox.com>
Checking only vm configuration for choose the shutdown method causes it
to always fail, after reaching the timeout, if the qemu agent option in
the vm configuration is enabled but the agent is not installed and
active in the guest.
As I seen in the windows vm the agent also crashes in some cases, so
shutdown don't fail only if qemu guest agent is not installed or not
started.
Added check that agent is active when choosing agent shutdown method to
avoid certain shutdown failure in those cases.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
[FE: do not set flag to suppress warning when agent is not running]
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
when creating new ones, we already force raw as format, but adding existing
volumes as tpmstate0 had no such checks.
Suggested-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
since swtpm currently doesn't support anything else, and might overwrite a file
using qcow2 or vmdk format by accident..
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
since there is no reliable way to check whether a linked clone would end up
being something other than a raw file, and the volumes are tiny anyway.
otherwise on directory storages, the following sequence of events could happen:
- linked clone using raw file as base and qcow2 as overlay
- swtpm_setup interprets qcow2 file as raw
- swtpm_setup fails to find TPM state and overwrites it with a new one
- file is now no longer a linked clone, but a raw file with a qcow2 extension
- move disk and migration fail because of the format mismatch
the downside is that storages that actually support raw linked clones (ZFS,
RBD, LVM-thin) now use more space for fully cloned TPM state volumes...
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
All callers have been switched to get the format from the storage
layer using checked_volume_format() and friends.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Avoid using the extension based qemu_img_format() helper. Failure is
not critical, because this is just the hint for what format the
restored target image should be allocated with, so fallback to 'raw'.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
The file_size_info() will return the size of the image based on
guessing the format. When importing via API, the correct size is
already known, so it's better to pass it in. The root-only 'qm'
commands for disk import and OVF import will still use auto-detection
for backwards compatibility. It might make sense to be able to
explicitly specify the format there too to get the correct size in all
cases.
New callers should detect the size according to the appropriate format
first.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Keep format auto-detection for backwards compatibility. Only root is
allowed to use such images as source images and the untrusted checks
will be done here.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Use the same logic as the actual import later.
Has the nice side effect of getting rid of the unnecessary manual
dispatch to the plugin too.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
With auto-detection, there might be false positives for raw images
that contain data that looks like another image format, but are not
problematic, because they will always be treated as raw images.
Since commit "image convert: use volume format from storage layer",
actual importing will happen using the storage layer format, so use
that here too.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Avoid that file_size_info() does auto-detection via qemu-img.
This also adapts to the new argument order.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Since commit "print drive commandline: improve format detection" such
mismatches will lead to being unable to start the VM, so catch the
issue early.
Suggested-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
For a Proxmox VE managed volume, prefer the format from the storage
layer rather than the 'format' option set on the drive. Fail if there
is a mismatch between the detected and configured format, because this
is not expected for managed volumes. Having this early hard failure
protects against undesirable issues with live migration and reboot
where the format of a drive would suddenly be different.
For a not Proxmox VE managed volume, use the same logic as before,
i.e. use the 'format' option for the drive with 'raw' as a fallback:
Only root can configure such devices.
Both also apply to the case where the 'cdrom' flag is set to avoid
autodetection by QEMU.
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
FG: typo fix in comment
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
First step towards using the storage layer format instead of the
extension based format from qemu_img_format() as a source of truth
everywhere. Currently, some callers use qemu_img_format() and some
use parse_volname().
For import, special handling is needed, because the format can be a
combined ova+$extracted_format.
There is a fallback for 'raw' format when no format is returned by the
storage layer for backwards compatibility, e.g. ISOs. Formats that are
not part of the $QEMU_FORMAT_RE are not allowed.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
The minimum supported version for Proxmox VE 8 nodes is QEMU 8.0 and
the beginning of the config_to_command() function already has a check
for at least version 5.0. No other caller of get_vm_machine() passes
in the parameter, so it can be removed from there as well.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Daniel Kral <d.kral@proxmox.com>
Tested-by: Daniel Kral <d.kral@proxmox.com>
The minimum supported version for a Proxmox VE 8 node is QEMU 8.0.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Daniel Kral <d.kral@proxmox.com>
Tested-by: Daniel Kral <d.kral@proxmox.com>
The minimum supported version for a Proxmox VE 8 node is QEMU 8.0.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Daniel Kral <d.kral@proxmox.com>
Tested-by: Daniel Kral <d.kral@proxmox.com>
The parameter was added by ac0077cc ("Use 'QEMU version' ->
'+pve-version' mapping for machine types") but it doesn't seem like
there ever was a caller. In particular, none of the current callers
pass in a value and it's not clear when one would require passing a
different version than the KVM binary version.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Daniel Kral <d.kral@proxmox.com>
Tested-by: Daniel Kral <d.kral@proxmox.com>
There have been some reports about `qm start` timeouts on VMs that have a
lot of NICs assigned.
This patch considers the number of NICs when calculating the config-specific
timeout. Since the increase in start time is linearly related to the number
of NICs, a constant timeout increment per NIC was chosen.
Signed-off-by: Hannes Laimer <h.laimer@proxmox.com>
as it may be the only cause of the clone incompatibility
Example:
# qm clone 101 102 --full --snapname foo
Before:
> Full clone feature is not supported for 'local-zfs:base-100-disk-2/vm-101-disk-2' (tpmstate0)
After:
> Full clone feature is not supported for a snapshot of 'local-zfs:base-100-disk-2/vm-101-disk-2' (tpmstate0)
Signed-off-by: Alexander Zeidler <a.zeidler@proxmox.com>
So far, the error message only contained the name of the disk
(tpmstate0, efidisk0, ...), which can also lead to the assumption that a
specific disk type is the problem. Now the volume ID is primarily
listed.
Example:
# qm clone 101 102 --full --snapname foo
Before:
> Full clone feature is not supported for drive 'tpmstate0'
After:
> Full clone feature is not supported for 'local-zfs:base-100-disk-2/vm-101-disk-2' (tpmstate0)
Signed-off-by: Alexander Zeidler <a.zeidler@proxmox.com>
When cloning was repeatedly attempted, the error message indicated a
different unsupported volume each time. The hash is now sorted to always
mention the same volume as long as it has not been fixed.
Signed-off-by: Alexander Zeidler <a.zeidler@proxmox.com>
[FE: replace old-style 'foreach' with 'for' while at it]
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
This check was added to guard the config format migration to a
dedicated section for cloudinit. The respective package version set
required for that to be understood is guaranteed to be available with
pve-manager 7.2-13 or newer, as that raised the versioned dependencies
respectively.
This hedges against a migration from a node with newer version to one
with older version, the effects would be basically that the name
argument in a cloudinit section would override the current one, as the
old parser interprets it as belonging to the main section, not the
cloudinit section.
We normally are cautious with removing such guards, and communicate
stricter requirements than we check, to safeguard users with a certain
ignorance or willingness to care for proper and periodic timely
upgrades.
But due to:
- PVE 7 being EOL since a few months
- PVE 7.2 being EOL for well over a year
- the documented requirement to upgrade to latest PVE 7.4 before an
upgrade to PVE 8
- The relatively harmless effects when this check is voided
we can drop that check more than safely now.
Reported-by: Christian Ebner <c.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the ui and api talks about 'import working storage' but the error here
still said 'for extraction'. Improve the message by unifiying the
wording and adding the storage name to it too.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
This reverts commit fca0ba5d77, quoting
Fiona in verbatim:
> Regarding the patch "schema: add fleecing-images config property",
> Fabian off-list suggested using a config section "special:fleecing"
> instead of a property, so that it is truly internal-only. If we go for
> that, the commit should be reverted. Which approach do you prefer?
-- https://lore.proxmox.com/pve-devel/5126c251-64fd-44fe-b1a6-fda9074eb9a1@proxmox.com/
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The function checks for resources that cannot be migrated, snapshoted,
or suspended.
To run this function while the snapshot lock is active, the
pve-guest-common patch 'AbstractConfig: add abstract method to check for
resources preventing a snapshot.' is required.
Signed-off-by: Markus Frank <m.frank@proxmox.com>
This patch is for enabling AMD SEV (Secure Encrypted Virtualization)
support in QEMU.
VM-Config-Examples:
amd_sev: type=std,no-debug=1,no-key-sharing=1
amd_sev: es,no-debug=1,kernel-hashes=1
kernel-hashes, reduced-phys-bits & cbitpos correspond to the variables
with the same name in QEMU.
kernel-hashes=1 adds kernel hashes to enable measured linux kernel
launch since it is per default off for backward compatibility.
reduced-phys-bios and cbitpos are system specific and are read out by
the query-machine-capabilities c program and saved to the
/run/qemu-server/host-hw-capabilities.json file. This file is parsed
and than used by qemu-server to correctly start a AMD SEV VM.
type=std stands for standard sev to differentiate it from sev-es (es)
or sev-snp (snp) when support is upstream.
QEMU's sev-guest policy gets calculated with the parameters no-debug
& no-key-sharing. These parameters correspond to policy-bits 0 & 1.
If type is 'es' than policy-bit 2 gets set to 1 to activate SEV-ES.
Policy bit 3 (nosend) is always set to 1, because migration features
for sev are not upstream yet and are attackable.
SEV-ES is highly experimental since it could not be tested.
see coherent doc patch
Signed-off-by: Markus Frank <m.frank@proxmox.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
this is to override the target extraction storage for the option disk
extraction for 'import-from'. This way if the storage does not
supports the content type 'images', one can give an alternative one.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
when 'import-from' contains a disk image that needs extraction
(currently only from an 'ova' archive), do that in 'create_disks'
and overwrite the '$source' volid.
Collect the names into a 'delete_sources' list, that we use later
to clean it up again (either when we're finished with importing or in an
error case).
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
creating non-raw disk images with arbitrary content is only possible with raw
access to the storage, but checking for references to external files doesn't
hurt, in case for non pve-managed volumes.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
[ DC: removed problematic checks for pve-managed volumes ]
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
This will automatically convert imported volume disks and newly
allocated VM volume disks (i.e. no efidisks, tpmstate disks, cloudinit
images, etc.) to a base volume, if the VM is a template.
Previously, this required a user to manually convert the
imported/allocated disk with `qm template --disk <disk>`.
Signed-off-by: Daniel Kral <d.kral@proxmox.com>
Automatically converts any imported volume disk to a base volume image
if the VM is a template and the volume was imported using the
"target-disk" option, as "unused" disks are not needed to be converted
as they won't be cloned with either linked nor full clones.
Signed-off-by: Daniel Kral <d.kral@proxmox.com>
Implements the "target-disk" option for the importdisk command, which
allows a disk to be imported and directly used instead of marking it as
an unused disk (e.g. unused0), which is the default behavior.
Signed-off-by: Daniel Kral <d.kral@proxmox.com>
[ TL: squash in style-nit with parameter wrapping multiple lines ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to be used internally to record volume IDs of fleecing images
allocated during backup.
Suggested-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
In preparation for the upcoming 'fleecing-images' key. To avoid mixing
of options with - and options with _, which is not very user-friendly,
it would be nice to add aliases for existing options with _. And
long-term, backup restore handlers could switch to the modern keys
with -.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
This can happen after a hard failure, e.g. if the vzdump task was
killed. The next backup (after unlocking the VM) would then fail with
> ERROR: VM 125 qmp command 'backup' failed - previous backup not finished
During the failure path of that attempt, 'backup-cancel' is executed
and the subsequent attempt would then work again. Do it up-front with
a warning instead of relying on this behavior.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
In preparation to use it to conditionally issue a QMP 'backup-cancel'
should a previous backup still be running.
While at it, avoid using the compat-only check_running() helper.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
When the VM is only started for backup, the VM will be stopped at that
point again. While the detach helpers do not warn about errors
currently, that might change in the future. This is also in
preparation for other cleanup QMP helpers that are more verbose about
failure.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Since pve-common commit:
eff5957 (sysfstools: file_write: properly catch errors)
this check here fails now when the reset does not work. It turns out
that resetting the device is not always necessary, and we previously
ignored most errors when trying to do so.
To restore that functionality, downgrade this `die` to a warning.
If the device really needs a reset to work, it will either fail later
during startup, or not work correctly in the guest, but that behavior
existed before and is AFAIK not really detectable from our side.
Also improve the warning message a bit to not scare users and explain
that we're continuing.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
[ TL: fine-tune error message a bit and avoid parenthesis ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Adds a syslog entry to log the process id that has been given to the
QEMU VM process at start. This is helpful debugging information if the
pid shows up at other places, like a kernel stack trace, while the VM
has been running, but cannot be retrieved anymore (e.g. the pidfile has
been deleted or only the syslog is available).
The syslog has been put in the `PVE::QemuServer::vm_start_nolock`
subroutine to make sure that the PID is logged not only when the VM has
been started by the API endpoint `vm_start`, but also when the VM is
started by a remote migration.
Suggested-by: Hannes Dürr <h.duerr@proxmox.com>
Suggested-by: Friedrich Weber <f.weber@proxmox.com>
Signed-off-by: Daniel Kral <d.kral@proxmox.com>
Reviewed-by: Daniel Herzig <d.herzig@proxmox.com>
