die if we get some unknown value, which is either a bug (new dev type
added to enum but not here) or a user manual edit error, good to
ccatch both
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Until now audio devices had to be added manually with the `args` option
in the VMs config file. This adds a new config option to define an audio
device. It is called `audio0` with the extra `0` to be prepared should
we ever implement support for more than one audio device.
Supported devices are:
* ich9-intel-hda: Intel HD Audio Controller, emulates ICH9
* intel-hda: Intel HD Audio Controller, emulates ICH6
* AC97: useful for older OSs like Win XP
If any of the `intel-hda`s is selected two additional devices will be
created: hda-micro and hda-duplex. The `*intel-hda` controllers need at
least one of them as they emulate microphones and speakers (hda-micro)
or line in and out devices (hda-duplex).
Having both is deemed best practice to avoid problems if some software
needs one of the other kind of output/input ports.
I also cleaned up some old, commented out, code regarding audio devices.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
with qemu 4.0 we can make use of the new pcie-root-ports with settings
for the width/speed which can resolve issues with some hardware combinations
when negioating link speed
so we add a new q35 cfg that we include with machine types >= 4.0
to preserve live migration of machines without passthrough but q35
for details about the link speeds see:
pcie: Enhanced link speed and width support
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg02827.html
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
If 'now' is passed to the startdate option, the kvm start fails with
below failure.
kvm: invalid datetime format
valid formats: '2006-06-17T16:01:21' or '2006-06-17'
With this patch, 'now' is ignored and not passed to the rtcflags (-rtc).
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
e.g. local storage was considered not allowed for offline migration
even if it is available on all nodes, this should now be fixed as it
is now considered available on all nodes if a local storage isn't
restricted to a specific subset of the available nodes. The user is
responseable to make sure that the datacenter storage config reflects
the actual setup, so there is no additional check for local storages
which aren't available on all nodes if they are not explicitly marked
at datacenter level.
Signed-off-by: Tim Marx <t.marx@proxmox.com>
This is required for Windows to recognize the ISO and as a result the cloudinit
config. This is the minimum to get any config working at all for windows.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
Regression from change allowing timeouts to be set, now shutting down
also works without timeouts again (previously qmp failed because of
the unknown "timeout" parameter passed to it).
We always delete the timeout value from the arguments, regardless of
truthiness. "delete" returns the deleted element, deleting a
non-existant hash entry returns undef, which is fine after this point:
"deleting non-existent elements returns the undefined value in their
corresponding positions."
- https://perldoc.perl.org/functions/delete.html
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
while it really should not pose an issue for live migrations lets be
on the safe side and also add this only with 3.1 or later machines
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Kernels 4.18+ (4.17+ for evmcs) support new Hyper-V enlightenments for
Windows KVM guests. QEMU supports these since 3.0 and 3.1 respectively.
tlbflush and ipi improve performance on overcommitted systems, evmcs
improves nested virtualization.
It's not entirely clear to me if Win7 already supports these, but since
it doesn't cause any performance penalties (and it works fine without
crashing, which makes sense either way, because Hyper-V enlightenments
are opt-in by the guest OS), enabling it regardless should be fine.
(As opposed to adding a new if branch for win8+)
Feature explanations to the best of my understanding:
hv_tlbflush allows the guest OS to trigger tlb shootdowns via a
hypercall. This allows CPUs to be identified via their vpindex (which
makes hv_vpindex a prerequisite to hv_tlbflush, but that is already
handled in our code). In overcommited configurations, where multiple
vCPUs reside on one pCPU, this increases performance of guest tlb
flushes, by only flushing each pCPU once. It also allows multiple tlb
flushes with only one vmexit.
hv_ipi allows sending inter-processor interrupts via vpindex, once again
making it a prerequisite. Benefits are pretty much as with tlbflush.
hv_evmcs is a VM control structure in L1 guest memory, allowing an L1 guest
to modify L2 VMCS and entering L2 without having the L0 host perform an
expensive VMCS update on trapping the nested vmenter.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The "guest-shutdown" guest agent call is blocking for some reason, so if
it fails (e.g. agent not installed on guest) only the default timeout of
10 minutes (see QMPClient.pm, sub cmd) would apply.
With this change, if (and only if) a timeout is specified via CLI/API,
it is used instead. In case it is not specified, behaviour stays the
same (default 10 min timeout).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This should help with the rare case where stop mode backups
fail to restart due to the $vmid.scope not being completely
gone when we want to restart. This queries systemd via dbus,
and if the scope is still there, awaits a UnitRemoved signal
for the scope from dbus.
For now with a 5 second timeout... (given that the processes
are already gone and it's really just waiting for systemd to
wake up, this should be plenty...)
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
to acutally allow to set the values requested by #2190 we need to
alter the limit a bit, as else the requested values cannot be save.
Just double it to 512, which should be really enough for this, else
go complain to your software vendor for needing such _hacks_ in the
first place..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
On some occasions e.g. license checking, the manufacturer string in the
SMBIOS settings edit has to allow characters such as whitespaces.
https://forum.proxmox.com/threads/proxmox-and-windows-rok-license-for-dell.53236/
In principle SMBIOS allows to pass any zero terminated string to the
corresponding fields in the structure type 1 (System Information).
By base64 encoding the values clashing of the config is avoided.
Relies on the corresponding patch to pve-manager to obtain base64 encoded values.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Adds the command 'qm cloudinit dump <vmid> <type>' where type is either
'user', 'network' or 'meta' as specified in the API.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
Adds the path '{vmid}/cloudinit/dump' and requires the parameter 'type'
that's either 'user', 'network' or 'meta'. Returns the generated config as
string.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
This adds a function to dump the generated cloudinit config. Only one
can be dumped at a time, either 'user', 'network' or 'meta'.
The logic to get user, network and metadata is copied from the other
path that also creates the ISO image to keep it simple and not
complicate the other code path further.
The hash generation for the metadata config is unified between nocloud
and configdrive2 formats. We need it a 3rd time with the new dump
functions so it makes sense to combine it and the metadata config
generation in a single function. The <format>_gen_metadata functions are
each used twice now.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
This commit addresses the following things:
* There can be multiple independent snapshot tree roots, display them
all
* If a snapshot defines a parent that doesn't exist, it is now
considered a snapshot root
There is a potential issue (which was also before and also affects the
GUI): circular snapshot trees. That plays into the second mentioned
issue above. If you manage to have a snapshot that defines a
non-existing root in the config, and then create a snapshot with that
exact name as a child of that snapshot, it would create a circular
dependency. This would have to get addressed in the GUI too.
Signed-off-by: Rhonda D'Vine <rhonda@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
for both vm_mon_cmd calls. under certain circumstances, the following
sequence of events can otherwise fail when live-migrating under load:
S...source node
T...target node
0: migration is complete, handover from S to T starts
1: S: logically move VM config file from S to T via rename()
2: S: rename returns, config file is (visibly) moved on S
3: S: trigger resume on T via mtunnel
4a: T: call vm_resume while config file move is not yet visible on T
4b: T: call vm_resume while config file move is already visible on T
4a instead of 4b means vm_mon_cmd will die in check_running unless
vm_mon_cmd_nocheck is used.
under heavy pmxcfs load and a slow cluster/corosync network, there can
be a few seconds of delay between 1 and 2, with a subsequent race ending in 4a
instead of 4b.
this issue was reported to occur on bulk migrations.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
