Since we don't scan all storages for matching disk images anymore for a
migration we don't have any images found via storage alone. They will be
referenced in the config somewhere.
Therefore, there is no need for the 'storage' ref.
The 'referenced_in_config' is not really needed and can apply to both,
attached and unused disk images.
Therefore the QemuServer::foreach_volid() will change the
'referenced_in_config' attribute to an 'is_attached' one that only
applies to disk images that are in the _main_ config part and are not
unused.
In QemuMigrate::scan_local_volumes() we can then quite easily map the
refs to each state, attached, unused, referenced_in_{pending,snapshot}.
The refs are mostly used for informational use to print out in the logs
why a disk image is part of the migration. Except for the 'attached' case.
In the future the extra step of the refs in QemuMigrate could probably
be streamlined even more.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
When scanning all configured storages for disk images belonging to the
VM, the migration could easily fail if a storage is not available, but
enabled. That storage might not even be used by the VM at all.
By not scanning all storages and only looking at the disk images
referenced in the VM config, we can avoid unnecessary failures.
Some information that used to be provided by the storage scanning needs
to be fetched explicilty (size, format).
Behaviorally the biggest change is that unreferenced disk images will
not be migrated anymore. Only images referenced in the config will be
migrated.
The tests have been adapted accordingly.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
All calling sites except for QemuConfig.pm::get_replicatable_volumes()
already enabled it. Making it the non-configurable default results in a
change in the VM replication. Now a disk image only referenced in the
pending section will also be replicated.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Make it possible to optionally iterate over disks in the pending section
of VMs, similar as to how snapshots are handled already.
This is for example useful in the migration if we don't want to rely on
the scanning of all storages.
All calling sites are adapted and enable it, except for
QemuConfig::get_replicatable_volumes as that would cause a change for
the replication if pending disks would be included.
The following lists the calling sites and if they should be fine with
the change (source [0]):
1. QemuMigrate: scan_local_volumes(): needed to include pending disk
images
2. API2/Qemu.pm: check_vm_disks_local() for migration precondition:
related to migration, so more consistent with pending
3. QemuConfig.pm: get_replicatable_volumes(): would change the behavior
of the replication, will not use it for now.
4. QemuServer.pm: get_vm_volumes(): is used multiple times by:
4a. vm_stop_cleanup() to deactivate/unmap: should also be fine with
including pending
4b. QemuMigrate.pm: in prepare(): part of migration, so more consistent
with pending
4c. QemuMigrate.pm: in phase3_cleanup() for deactivation: part of
migration, so more consistent with pending
[0] https://lists.proxmox.com/pipermail/pve-devel/2023-May/056868.html
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Commit efa3355d ("fix #3428: cloudinit: add parameter for upgrade on
boot") changed the default, but this is a breaking change. The bug
report was only about making the option configurable.
The commit doesn't give an explicit reason for why, and arguably,
doing the upgrade is not an issue for most users. It also leads to a
different cloud-init instance ID, because of the different setting,
which in turn leads to ssh host key regeneration within the VM.
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
The scope can get into failed state for some issues like OOM kills of
the whole scope, in that case a user cannot re-start the VM until
they manually reset it.
Do this for now inline to avoid a pve-common bump as done in [0]
(location was suggested by me thinking we could maybe do it over
dbus, but as we have a stop command here already it probably doesn't
matters)
[0]: https://lists.proxmox.com/pipermail/pve-devel/2023-June/057770.html
Originally-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
to allow early checking of the merged config, if the backup archive
passed in is a proper volume where extraction is possible.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
to avoid duplicate work, always set 'volid' to the backup volume's volid, if it
was successfully parsed as such.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
they can only be migrated to nodes where there exists a mapping and if
the migration is done offline
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-By: Markus Frank <m.frank@proxmox.com>
for offline migration, limit the allowed nodes to the ones where the
mapped resources are available
this adds new info to the api call namely the 'mapped-resources' list,
as well as the 'unavailable-resources' info in the 'not_allowed_nodes'
object
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-By: Markus Frank <m.frank@proxmox.com>
by adding them to their own list, saving the nodes where they are not
allowed, and return those on 'wantarray' so we don't break existing
callers that don't expect it.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-By: Markus Frank <m.frank@proxmox.com>
this patch allows configuring pci devices that are mapped via cluster
resource mapping when the user has 'Resource.Use' on the ACL path
'/mapping/pci/{ID}' (in addition to the usual required vm config
privileges)
When given multiple mappings in the config, we use them as alternatives
for the passthrough, and will select the first free one on startup.
It is using our regular pci reservation mechanism for regular devices and
we introduce a selection mechanism for mediated devices.
A few changes to the inner workings were required to make this work well:
* parse_hostpci now returns a different structure where we have a list
of lists (first level is for the different alternatives and second
level is for the different devices that should be passed through
together)
* factor out the 'parse_hostpci_devices' which parses each device from
the config and does some precondition checks
* reserve_pci_usage now behaves slightly different when trying to
reserve an device with the same VMID that's already reserved for,
since for checking which alternative we can use, we already must
reserve one (this means that qm showcmd can actually reserve devices,
albeit only for up to 10 seconds)
* configuring a mediated device on a multifunction device is not
supported anymore, and results in failure to start (previously, it
just chose the first device to do it). This is a breaking change
* configuring a single pci device twice on different hostpci slots now
fails during commandline generation instead on qemu start, so we had
to adapt one test where this occurred (it could never have worked
anyway)
* we now check permissions during clone/restore, meaning raw/real
devices can only be cloned/restored by root@pam from now on.
this is a breaking change.
Fixes#3574: Improve SR-IOV usability
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-By: Markus Frank <m.frank@proxmox.com>
this patch allows configuring usb devices that are mapped via
cluster resource mapping when the user has 'Mapping.Use' on the ACL
path '/mapping/usb/{ID}' (in addition to the usual required vm config
privileges)
for now, this is only valid if there is exactly one mapping for the
host, since we don't track passed through usb devices yet
This now also checks permissions on clone/restore, meaning a
'non-mapped' device can only be cloned/restored as root@pam user.
That is a breaking change.
Refactor the checks for restoring into a sub, so we have central place
where we can add such checks
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-By: Markus Frank <m.frank@proxmox.com>
similar to how we handle the PCI module and format. This makes the
'verify_usb_device' method and format unnecessary since
we simply check the format with a regex.
while doing tihs, i noticed that we don't correctly check for the
case-insensitive variant for 'spice' during hotplug, so fix that too
With this we can also remove some parameters from the get_usb_devices
and get_usb_controllers functions
while were at it, refactor the permission checks for the usb config too
and use the new 'my sub' style for the functions
also make print_usbdevice_full parse the device itself, so we don't have
to do it in multiple places (especially in places where we don't see
that this is needed)
No functional change intended
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-By: Markus Frank <m.frank@proxmox.com>
We use this in a few places. By factoring it into its own function, we
can avoid running slightly different checks in various places.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Using the word 'agent' is highly confusing here as there is no QMP
agent and thus wrongly suggests that the value is related to the
guest agent[0].
[0]: https://forum.proxmox.com/threads/123590/post-537716
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
https://gitlab.com/x86-psABIs/x86-64-ABI/https://lists.gnu.org/archive/html/qemu-devel/2021-06/msg01592.html
"
In 2020, AMD, Intel, Red Hat, and SUSE worked together to define
three microarchitecture levels on top of the historical x86-64
baseline:
* x86-64: original x86_64 baseline instruction set
* x86-64-v2: vector instructions up to Streaming SIMD
Extensions 4.2 (SSE4.2) and Supplemental
Streaming SIMD Extensions 3 (SSSE3), the
POPCNT instruction, and CMPXCHG16B
* x86-64-v3: vector instructions up to AVX2, MOVBE,
and additional bit-manipulation instructions.
* x86-64-v4: vector instructions from some of the
AVX-512 variants.
"
This patch add new builtin model derivated from qemu64 model,
to be compatible between intel/amd.
mandatory flags from qemu-doc generator:
https://gitlab.com/qemu/qemu/-/blob/master/scripts/cpu-x86-uarch-abi.py
levels = [
[ # x86-64 baseline
"cmov",
"cx8",
"fpu",
"fxsr",
"mmx",
"syscall",
"sse",
"sse2",
],
[ # x86-64-v2
"cx16",
"lahf-lm",
"popcnt",
"pni",
"sse4.1",
"sse4.2",
"ssse3",
],
[ # x86-64-v3
"avx",
"avx2",
"bmi1",
"bmi2",
"f16c",
"fma",
"abm",
"movbe",
"xsave" #missing from qemu doc currently
],
[ # x86-64-v4
"avx512f",
"avx512bw",
"avx512cd",
"avx512dq",
"avx512vl",
],
]
x86-64-v1 : I'm skipping it, as it's basicaly qemu64|kvm64 -vme,-cx16 for compat Opteron_G1 from 2004
so will use it as qemu64|kvm64 is higher are not working on opteron_g1 anyway
x86-64-v2 : Derived from qemu, +popcnt;+pni;+sse4.1;+sse4.2;+ssse3
min intel: Nehalem
min amd : Opteron_G3
x86-64-v2-AES : Derived from qemu, +aes;+popcnt;+pni;+sse4.1;+sse4.2;+ssse3
min intel: Westmere
min amd : Opteron_G3
x86-64-v3 : Derived from qemu64 +aes;+popcnt;+pni;+sse4.1;+sse4.2;+ssse3;+avx;+avx2;+bmi1;+bmi2;+f16c;+fma;+abm;+movbe+xsave
min intel: Haswell
min amd : EPYC_v1
x86-64-v4 : Derived from qemu64 +aes;+popcnt;+pni;+sse4.1;+sse4.2;+ssse3;+avx;+avx2;+bmi1;+bmi2;+f16c;+fma;+abm;+movbe;+xsave;+avx512f;+avx512bw;+avx512cd;+avx512dq;+avx512vl
min intel: Skylake
min amd : EPYC_v4
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
It can also be a permission issue, so the current error can be
a bit confusing.
Reported in the community forum:
https://forum.proxmox.com/threads/120619/post-562660
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
to ensure we got the vnet access check helper available for us, and
also that the get_derived_property interface is available for our
users
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This was not only rather inefficient (getting the config from the
archive twice) but also wrong, as we can override options on restore,
so we can do the check only when the backed-up config and override
config got merged.
If this is to late from POV of volume deletion or the like, then the
issue is that those things happen to early, as we can only know what
to do with the actual target config, so destructive actions that
happen before that are wrong by design.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
See the corresponding commit in guest-common for more information.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This is the single remaining user of the id argument. The id argument
is a Proxmox-specific extension to QEMU, which we'd like to drop to
reduce our differences with upstream QEMU.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
The commands snapshot-drive and delete-drive-snapshot have been unused
by qemu-server since commit eba2b721 ("use qemu's blockdev-snapshot
functions") and are now going to be dropped in our QEMU builds too, so
get rid of these left-overs.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
If no FQDN is provided, we simply set it to the current hostname. This
ensures that the hostname *really* gets set, since we encountered an
issue on Fedora and CentOS based systems where no hostname got set at
all.
When there's no FQDN set in the cloudinit config, this leads to the
following entry:
127.0.1.1 <hostname> <hostname>
Which doesn't seem to cause any issues.
Tested on:
- Ubuntu 23.04
- CentOS 8
- Fedora 38
- Debian 11
- SUSE 15.4
Signed-off-by: Leo Nunner <l.nunner@proxmox.com>
Similar to the corresponding endpoint for containers. Because disks
are involved, this can be a longer running operation, as is also
indicated by the 60 seconds timeout used in qemu_block_resize() which
is called by this endpoint.
This is a breaking API change.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Support for this was added in QEMU 5.1 by commit 7fa140abf6 ("qcow2:
Allow resize of images with internal snapshots").
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
for convenience. These options do not influence the QEMU instance
directly, but are only used for migration, so no need to keep them in
pending.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
This patch partially reverts commit 1b5706cd16,
by reintroducing the old format for return values (key, value, pending,
delete), but drops the "force-delete" return value. Right now, this
endpoint does not conform to its own format, because the return values
are as follows:
{
key => {
old => 'foo',
new => 'bar',
},
[…]
}
While the format specified is
[
{
key => 'baz',
old => 'foo',
new => 'bar',
},
[…]
]
This leads to the endpoint being broken when used through 'qm' and
'pvesh'. Using the API works fine, because the format doesn't get
verified there. Reverting this change brings the advantage that we can
also use PVE::GuestHelpers::format_pending when calling the endpoint
through qm again.
Signed-off-by: Leo Nunner <l.nunner@proxmox.com>
these config keys only affect the cloudinit drive contents (and state of the
guest inside the VM), they are not used anywhere on the hypervisor side, so
they should not require VM.Config.Network (which allows a lot more, such as
changing vNIC VLAN tags or the bridges they are connected to).
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
instead use a recent example that served as a workaround in #4625.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
like the deprecation message printed by QEMU suggests.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
like the deprecation message printed by QEMU suggests.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
