at the end of a live migration, we need to remove old mac entries
on source host (vm is not yet stopped), before resume vm on target host
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
[T: resolve conflicts and rework on apply ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
In theory we can have a config with netX records that do not specify
a `macaddr` property, we just auto-generate on in config2cmd for
startup transitively, but don't save that explicitly back to the
config; so while we could parse the /proc/$pid/cmdline or try to get
the info from QMP (not fully straight forward) it seems rather a
hassle; especially if one has in mind that this cannot happen via the
API FWICT; as there a "deletion" *saves* a newly auto generated value
out to the config, same with clone of a VM and restore of a backup.
So, in basically all reasonable cases we got the `macaddr` available,
but if we don't it makes no sense to add a FDB variable for a *newly*
generated one by the parse_net call, as the VM won't use that (well,
at least if one doesn't get "lucky" and it randomly re-generates the
same as on startup), so allow telling parse_net to skip auto
generating MACs and use that in the add-fdb-entries helper
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
On plain VM start (no live migration), we can simply add MAC address
into the fdb. In case of a live migration, we add the mac address
just before the resume.
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
If the config doesn't contain the cloud-init disk anymore after the
rollback, we have to clean it up since otherwise no further disk can be
attached unless the one still existing on the storage is deleted.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
Reviewed-by: Stefan Hanreich <s.hanreich@proxmox.com>
Tested-by: Stefan Hanreich <s.hanreich@proxmox.com>
q35 + usb passthrough
q35 + usb3 passthrough
q35 + usb3 passthrough with new xhci controller
old machine type + new usb config error
old machine type + q35 + new usb config error
old ostype (w2k) + new usb config error
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
same as with the extended support for more usb devices, allow
hotplugging for guests that can use the qemu-xhci controller which
require a machine type >= 7.1 and a ostype l26 or windows > 7
if no usb device was passed through on startup, dynamically add
the xhci controller (and remove if the last usb device is unplugged)
so that live migration is still possible
much of the usb hotplug code was already there, but it still needed
a few adaptions, for example we have to add a chardev when adding
a spice redir port (that gets automatically removed when the
usb-redir device gets removed)
since the spice devices use the id 'usbredirdevX' instead of 'usbX', we
have to manually map that a bit around
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
for machine versions >= 7.1 and ostype linux or windows > 7, we use the
qemu-xhci controller where we have up to 14 usable ports, so make them
available to the user
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
going by reports in the forum (e.g. [0]) and semi-official qemu
information[1], we should prefer qemu-xhci over nec-usb-xhci
for compatibility purposes, we guard that behind the machine version,
so that guests with a fixed version don't suddenly have a different usb
controller after a reboot (which could potentially break some hardcoded
guest configs)
0: https://forum.proxmox.com/threads/proxmox-usb-connect-disconnect-loop.117063/
1: https://www.kraxel.org/blog/2018/08/qemu-usb-tips/
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
should not happen normally, but an inattentive user of that function
may forget to check the validity of the parsed device, so err
on the safe side here
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
just outside of context, we already save the result from
machine_type_is_q35 into the $q35 variable, but never use it.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Reuse the PVE::CpuSet to validate cpuset formatting.
Add new qemu property called 'affinity' to store the cpuset.
Push taskset command in front of kvm if 'affinity' is set.
Signed-off-by: Daniel Bowder <daniel@bowdernet.com>
mdevs have a host-unique UUID they are indexed with in the PCI-id
independent `/sys/bus/mdev/devices/<uuid>` path, so there is no need
to go through the PCI id for them.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the preparing of PCI devices or the start of the VM fails, we need
to cleanup the PCI devices (reservations *and* mdevs), or else it
might happen that there are leftovers which must be manually removed.
to include also mdevs now, refactor the cleanup code from
'vm_stop_cleanup' into it's own function, and call that instead of
only 'remove_pci_reservation'
also simplifies the code, such that it now removes all PCI ids
reserved for that VMID, since we cannot have multiple VMs with the
same VMID anyway
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Previously, only a plaintext line in the task log showed something was off.
Now, the GUI will show it as a warning.
Reviewed-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Matthias Heiserer <m.heiserer@proxmox.com>
This allow to regenerate config drive if pending values exist
when we change vm options.
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
This allow to regenerate the config drive with 1 api call.
This also avoid to delete drive first, and recreate it again.
As it's a readonly drive, we can simply live update it,
and eject/replace it with qemu monitor
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Instead using vm pending options for pending cloudinit generated config,
write current generated cloudinit config in a new [special:cloudinit] SECTION.
Currently, some options like vm name, nic mac address can be hotplugged,
so they are not way to know if the cloud-init disk is already updated.
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
While the clamping already happens before setting the actual systemd
CPU{Shares, Weight}, it can be done here too, to avoid writing new
out-of-range values into the config.
Can't use a validator enforcing this because existing out-of-range
values should not become errors upon parsing the config.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
while making it take the value directly instead of the config.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
set aliases for the previous ones for backward compat.
There's still cleanup potential, e.g., for snapshots, but to do that
nicely we may need (or want) to extend CLIHandler to accept commands
without fixed params also on the command group itself.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Since kernel 5.15, there is an issue with io_uring when used in
combination with CIFS [0]. Unfortunately, the kernel developers did
not suggest any way to resolve the issue and didn't comment on my
proposed one. So for now, just disable io_uring when the storage is
CIFS, like is done for other storage types that had problematic
interactions.
It is rather easy to reproduce when writing large amounts of data
within the VM. I used
dd if=/dev/urandom of=file bs=1M count=1000
to reproduce it consistently, but your mileage may vary.
Some forum reports about users running into the issue [1][2][3].
[0]: https://www.spinics.net/lists/linux-cifs/msg26734.html
[1]: https://forum.proxmox.com/threads/109848/
[2]: https://forum.proxmox.com/threads/110464/
[3]: https://forum.proxmox.com/threads/111382/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
