and adapt the tests
this does not impact live migration, since the order here does not
change the device layout
we want this to consistently have the readconfig first
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
from hotplug_pending we go into 'vmconfig_update_disk', where we check the
hotpluggability of options.
add 'ssd' there as a non-hotpluggable option (since we'd have to unplug/plug to
change the drive type)
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
The package will be used for custom CPU models as a SectionConfig, hence
the name. For now we simply move some CPU related helper functions and
declarations over from QemuServer to reduce clutter there.
Exports are to avoid changing all call sites, functions have useful
names on their own.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
As 'qemu_img_format' just matches a regex, this doesn't make much of
a difference, but AFAICT all other calls of 'qemu_img_format' use 'volname'.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
since we handle errors gracefully now, we don't need to write & save
config every time we change a setting.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
get_basic_machine_info was removed by commit 045749f2fc.
Use get_host_arch to get the default machine type instead, and
optionally allow to specify architecture as parameter.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
* query_understood_cpu_flags returns all flags that QEMU/KVM knows about
* query_supported_cpu_flags returns all flags that QEMU/KVM can use on
this particular host.
To get supported flags, a temporary VM is started with QEMU, so we can
issue the "query-cpu-model-expansion" QMP command. This is how libvirt
queries supported flags for its "host-passthrough" CPU type.
query_supported_cpu_flags is thus rather slow and shouldn't be called
unnecessarily.
Note that KVM and TCG accelerators provide different expansions for the
"host" CPU type, so we need to query both.
Currently only supports x86_64, because QEMU-aarch64 doesn't provide the
necessary querying functions.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
wrap around code which can possibly fail in evals to handle them
gracefully, and log errors.
note: this results in a change of behavior in the API. since errors
are handled gracefully instead of "die"ing, when there is a pending
change which cannot be applied for some reason, it will get logged in
the tasklog but the vm will continue booting regardless. the
non-applied change will stay in the pending section of the
configuration.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of writing the config after every change, we can do it once for
all the changes in the end to avoid redundant i/o.
we also don't need to load_config after writing fastplug changes.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
bump versioned build-dependency, as qemu-server has tests checking
for errors, and we fixed an grammar error in pve-storage, so we need
the newer version to ensure our test go through
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
run_command only passes defined and chomped strings to the callback,
so no need to do that twice.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
QEMU usually only prints warnings and errors and stays silent otherwise,
so it makes sense to just log all of it's output.
Prefix it with '[<target_hostname>]' to indicate that the output is
coming from the remote node, so users know where to search for the
error.
Side effect is that the 'VM start' task created by the migration will
now show the "QEMU:" prefix, but it's still very readable IMHO.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
By default run_command prints the entire commandline executed when an
error occurs, but QEMU and our migrate command are not only
uninteresting to the user[*] but also annoyingly long. Hide them and only
print the exit code.
[*] Especially our migrate command, since it can't be manually executed
anyway. QEMU's commandline *might* contain something interesting, but is
so long that it's tricky to parse anyway, any a user can always call 'qm
showcmd --pretty'.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Split out 'update_disksize' from the renamed 'update_disk_config' to
allow code reuse in QemuMigrate.
Remove dots after messages to keep style consistent for migration log.
After updating in sync_disks (phase1) of migration, write out updated
config. This means that even if migration fails or is aborted in later
stages, we keep the fixed config - this is not an issue, as it would
have been fixed on the next attempt anyway, and it can't hurt to have
the correct size instead of a wrong one either way.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
only VM.PowerMgmt is not enough, since we allocate space on a storage,
so we need VM.Config.Disk on the vm and Datastore.AllocateSpace on the storage
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the user set a device as hostpci with the 'shorthand' syntax:
hostpciX: 00:12
we ignored it on starting and showcmd and continued.
Since the user explicitly wanted to passthrough a device, we now check
if there is actually a device with that id
for explicitly configured devices (00:12.1), we did not check if it exists,
but the kvm call failed with a non-obvious error message
now we always call 'lspci' from SysFSTools to check if it actually exists,
and fail if not. With this, we can drop the workaround for adding
'0000' if no domain was given, since lspci does it already for us
this fixes#2510, an issue with using mediated devices where the users did not have
the domain in the config, since we forgot to add the default domain there
the only issue with this patch is that it changes the behaviour of
'showcmd' slightly, as in now, we die if the device was explicitly
given, but did not exists (we showed the commandline, now we fail)
this also slightly changes the commandline for qemu (adding always
the domain), which is not a problem since we cannot live migrate
or snapshot such vms, but we have to adapt the tests
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
some storage backends have bigger granularity than the default 128k
size from the EFIVARS template file, so we actually need to poll the
real created disk size, as it will be used to create the target
volume for local storage migration on running VMs, if it's to small
the target will be to small and migration will fail.
Just a fix for newly created EFIDISKS, for others we need to rescan
the size after we've got the migrate lock and write the updated info
out, so that the target node has the correct one (protected from
migrate lock).
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
if a user removed the vmstate from the config for whatever reason,
a vmstart did not remove the 'suspended' lock
so always delete it and delete the vmstate only if it really was there
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
while it's a disk from our storage POV, in QEMU it's a pflash, and
those cannot be hot-plugged
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
With our QEMU 4.1.1 package we can pass a additional internal version
to QEMU's machine, it will be split out there and ignored, but
returned on a QMP 'query-machines' call.
This allows us to use it for increasing the granularity with which we
can roll-out HW layout changes/additions for VMs. Until now we
required a machine version bump, happening normally every major
release of QEMU, with seldom, for us irrelevant, exceptions.
This often delays rolling out a feature, which would break
live-migration, by several months. That can now be avoided, the new
"pve-version" component of the machine can be bumped at will, and
thus we are much more flexible.
That versions orders after the ($major, $minor) version components
from an stable release - it can thus also be reset on the next
release.
The implementation extends the qemu-machine REGEX, remembers
"pve-version" when doing a "query-machines" and integrates support
into the min_version and extract_version helpers.
We start out with a version of 1.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reviewed-by: Stefan Reiter <s.reiter@proxmox.com>
if we don't know which format the source volume/file has, let qemu-img
decide.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
or any other variant of the word 'pending'.
note that we can actually allow this snapshot after PVE 7.0, since
pending section and snapshots will be properly namespaced.
([pve:pending] and [snap:$snapname] or similar).
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
this is useful as meta information for e.g., provisioning or config
management systems
adding the info also to the 'status' api call to make it easier to show
it in the gui
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
...into:
* PVE::QemuServer::Helpers::min_version: check a major.minor version
string with a given major/minor version (this is equivalent to calling
the old qemu_machine_feature_enabled with only $kvmver)
* PVE::QemuServer::Machine::extract_version: get major.minor version
string from arbitrary machine type (e.g. pc-q35-4.0, ...)
* PVE::QemuServer::Machine::machine_version: helper to call
extract_version automatically before min_version
Includes a cfg2cmd test case with pinned machine version.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
...PVE::QemuServer::Machine.
qemu_machine_feature_enabled is exported since it has a *lot* of users
in PVE::QemuServer and a long enough name as it is.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
QMP and monitor helpers are moved from QemuServer.pm.
By using only vm_running_locally instead of check_running, a cyclic
dependency to QemuConfig is avoided. This also means that the $nocheck
parameter serves no more purpose, and has thus been removed along with
vm_mon_cmd_nocheck.
Care has been taken to avoid errors resulting from this, and
occasionally a manual check for a VM's existance inserted on the
callsite.
Methods have been renamed to avoid redundant naming:
* vm_qmp_command -> qmp_cmd
* vm_mon_cmd -> mon_cmd
* vm_human_monitor_command -> hmp_cmd
mon_cmd is exported since it has many users. This patch also changes all
non-package users of vm_qmp_command to use the mon_cmd helper. Includes
mocking for tests.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
vm_exists_on_node in PVE::QemuConfig checks if a config file for a vmid
exists
vm_running_locally in PVE::QemuServer::Helpers checks if a VM is running
on the local machine by probing its pidfile and checking /proc/.../cmdline
check_running is left in QemuServer for compatibility, but changed to
simply call the two new helper functions.
Both methods are also correctly mocked for testing snapshots.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
parse_cmdline is required for upcoming changes related to custom CPU
types and live migration, and this way we can re-use existing code.
Provides the necessary infrastructure to parse QEMU /proc/.../cmdline.
Changing the single user (check_running) is trivial too.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Also remove unused $confdir variable in QemuConfig, but leave it and
$lock_dir there, since those paths should only be used with
cfs_config_path anyway.
nodename() is still called in multiple places, but since it's cached by
INotify it doesn't really matter.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
found no use with tree-wide search, so remove:
* nic_models
* os_list_description
Both were introduced before the import to SVN happened.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Out code behaves like either l26 or other when the ostype is
undefined, both are not common as our webinterface _always_ sets the
ostype.
If one configured QXL with a VM as output device but does not has an
ostype set, and that works without "max_outputs=4" it really should
work with none too.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
with pve-qemu-4.0.1-3 or higher it was not possible in a spice remote
session to enable more displays on the fly in linux guests.
Adding the `max_outputs` parameter to the qxl device manually restores
the functionality.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
While we may not want to copy the cloudinit disk/drive, we still need
to create+allocate the volume, else the next start complains about a
missing CI drive..
fixes commit 7d6c99f0a0.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This adds an extra field to agent_fmt that specifes the type of guest
agent connection to use. Currently there is no choice, and defaults to
virtio-serial. Since qemu-ga also runs over isa-serial, this allows OSes
such as NetBSD and OpenBSD, which do not have support for virtio-serial,
to run a qemu-ga.
This is an optional field, which leaves the default as virtio-serial. As
it doesn't change the default, it will require no change to older
configuration files.
Signed-off-by: Matt Dunwoodie <ncon@noconroy.net>
Show storages configured for the target node and not for the current one
because they can be different.
Duplicated the `complete_storage` sub and extended it to extract the
targetnode from the parameters to pass it into the storage_check_enabled
function.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
since PVE::Cluster::get_local_migration_ip does not exist anymore. this
is basically an inlined version, since this is the only remaining caller
that we actually want to keep.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
We are in the QemuServer package not in LXC, so use the correct
package for the Config, namely QemuConfig
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the reboot request is only cleaned in the vm_start path, so if reboot
fails for some reason, the request still exists. this causes an
unintentional reboot when a shutdown/stop/hibernate is called.
to mitigate, we can just clear the reboot request in case of an error.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
This brings qemu more in line with containers, and it's nicer to
allow passing the replacement config if we want to keep it, instead
of setting a "memory: 128" config.
Use that to lock it on removal before final deletion, and on legacy
tar archive restore, in between old VM destruction and new
restoration.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
it has some potential semantic change too, i.e., the Storage
vdisk_list call is not wrapped by eval anymore, put as
we did some (unguarded) storage things before that call I'd say that
that does not matters much..
We try to clean all unused disks too, even if one deletion fails
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
When calling qmrestore a config file is created and locked with a lock
property. The following destroy_vm has been impossible as skiplock has not
been set.
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
This function has been used in one place only into which we inlined its
functionality. Removing it avoids confusion between vm_destroy and vm_destroy.
The whole $importfn is executed in a lock_config_full.
As a consequence, for the inlined code:
1. lock_config is redundant
2. it is not possible that the VM has been started (check_running) in the
meanwhile
Additionally, it is not possible that the "lock" property has been written into
the VM's config file (check_lock) in the meanwhile
Add warning after eval so that it does not go unnoticed if it ever comes into
action.
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
with qemu 4.0.1, there is now a machine type pc-q35-4.0.1 which does not fit
into our regex
this broke live migration of q35, as we give the machine type (incl version
info) to 'qm start' on the target node, which checks it against the
JSONSchema
to fix this, extend the regex to allow any number of version levels,
for q35, i440fx and virt (to be more future proof)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
As mentioned on the mailing list [0] disks owned by the VM and unused
disks should be removed before the config file is removed.
[0] https://pve.proxmox.com/pipermail/pve-devel/2019-October/039593.html
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
As mentioned in #2408, live-migrating a VM between storages that use
different scsi backends (scsi-hd, scsi-generic, scsi-block) breaks.
To fix, from QEMU 4.1 machine types onward (to not break current
behaviour any more), only use scsi-hd, as in recent versions, there is
almost no difference between the two anyway.
scsi-block (which potentially also breaks) requires a flag to be
manually set on the disk, so we can assume the user knows what they're
doing.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Suggested-by: Daniel Berteaud <daniel@firewall-services.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Each pending options has a hash value which has the 'force'
information encoded as entry. But, this can be { force => 1 } or
{ force => 0 }, so we actually need to check the value and not just
set force to the hash directly, as else we have force always truthy..
fixes a bug where 'detach' caused disks to be destroyed immediately,
because $force parameter was always true since hash is true.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We cannot activate a path, only volume IDs with activate_volumes
(duh)
fixes commit 5c1d42b7f8
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
most of the pending changes related code has been moved into
AbstractConfig, so we have to call them as class methods from QemuConfig instead.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
brings us more in line with what we do in pve-container, also it's
good to not use file_set_contents directly if we have all those nice
wrapper interface methods to do things in a safe and guaranteed way.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
So, while we could just make this a special case before the
config_to_command call and set the $conf->{vmstate} to the statefile
for the case were it's a valid volumeid, the special case handling
get's much easier when we do this outside of that method.
So it's basically a trade-off, and after looking far to long at all
nice revisions Alwin made for me and Fabians request, and even trying
out different approaches, it was never perfect.
But having slight code duplication over the movement mess I proposed
(as I did not had the full picture then, sorry Alwin) felt like the
slightly nicer trade off, as all worked I just use this one now, it
has very clear semantics, easy to understand and that now three lines
are duplicated is IMO irrelevant.
Co-developed-by: Alwin Antreich <a.antreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
the volume id list is only used to activate before real start and
deactivate later, so use it for the vmstate file too.
This not only makes config_to_command have less side effects, it also
ensures that the vmstate is deactivated again
Co-developed-by: Alwin Antreich <a.antreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
and use it also for efidisk creation and importdisk
this way we correctly handle zfs-over-iscsi options for those cases
also write tests for it
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
In general it matters where a command line options is positioned
inside a QEMU command, so we want to actually also check the order in
the cfg2cmd test, to do so we need to avoid false positives like this
added.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Thanks to Gilberto Nunes for finding a bug where the VM would not start
with foldersharing enabled and the qemu agent option disabled [0].
The cause was that the device org.spice-space.webdav.0 would not find a
virtio-serial-bus in this situation.
Since we always create a virtio-serial-bus for the spice vdagent it
seems sensible to use that also for the foldersharing device by moving
it in front of the other spice devices.
[0]: https://pve.proxmox.com/pipermail/pve-devel/2019-October/039441.html
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
This removes the cloudinit disk from the list of drives to clone. As the
cloudinit disk is recreated on every VM start, it's not necessary to
clone it.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
The reason for why we did not do this in the first place was the fact
that the "usb3" flag could be set in older qemu-server versions, we
just ignored it but not filtered it out of the config..
That means there can be VMs out there which would now become a
different HW layout, and issue for migration and live-snapshot
restore.
But, actually, while the "usb3" property could be set it allowed to
start the VM in only if an additional USB devices was added to the VM
with USB2, or the VM uses "q35" based machine - as else no "ehci" was
available, and thus the "ignored" USB3 - SPICE could not get attached
anywhere -> QEMU chickened out.
And if a user had a configuration where this could started we have
still a bit luck, live-migration was not possible as the "can't
migrate VM which uses local devices:" check still hit, as in
qemu-server older than 6.0-8 we explicitly checked for "spice" when
seeing what usb device were not local, so a "spice,usb3=X" was always
(luckily) wrongly detected as local device -> migration was blocked.
So we only have one case left: restoring a live-snapshot. Here sadly
there seems no way out, it was possible to do with a "spice,usb3=1"
usb device, and thus all Snapshots taken on such VMs after they had a
clean restart on PVE 6 (to have a machine version >= 4.0) are broken
- but can be easily fixed by removing the "usb3=1" from the
problematic snapshot config.
As restoring a snapshot can be repeated more than once even on
failure without rendering the snapshot or VM permanently unusable,
this should be a reasonable compromise.
I strongly believe that the chance is so small that no one is
affected in practice and the property description mentioned that it
was not supported. If anybody is affected on snapshot restore we can
help them on a case-per-case basis.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The fix introduced in commit bf4a933 did not work as intended. We're
iterating over the $oldconf, not over $virtdev_hash. This means
$drive->{is_cloudinit} is always undefined. Instead use the $exclude_cloudinit
parameter from drive_is_cdrom().
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
The check relied on the fact that in a regular use case a usb device of
type spice would not have any other settings like `usb3=1`. An exact
match worked fine for this.
This patch changes the behaviour and makes it possible to migrate VMs
with Spice USB devices that have additional usb options set.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
To not change current behaviour and thus breaking live migration USB3
for a Spice USB device requires Qemu v4.1.
The old behavior was that even though technically it was possible to
the set `usb3=1` setting, it was ignored. The bus was hardcoded to
ehci. If another USB2 device was added or the machine type was set to
Q35 an ehci controller was present and the VM was able to boot.
With this patch the behaviour is changing and the bus is set to xhci if
USB3 is set for the Spice USB device and the VM is running under Qemu
v4.1.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
this creates a reboot request file (inspired by pve-container)
and relies on the 'qm cleanup' call by the qmeventd to detect
and restart the vm afterwards
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we want to reuse most of the code in the locked context of vm_stop
for vm_reboot (since it really is just a vm_stop with a
create_reboot_request in there) so we factor that out into
_do_vm_stop
and note that it has to be called in a locked context
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the reboot trigger file was set, start the vm again
also cleanup the reboot trigger on vm startup, to prevent
leftover files to trigger a reboot at the next shutdown
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
try to increase variable declaration to use locality, reduce
duplication of same variable names used, and try to cleanup a bit in
general..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
For non pci express passthrough additional addresses are reserved.
For pcie passthrough pcie root ports are needed (unless guest is like
windows 7).
The first 4 pcie root ports are defined by default in the pve-q35*.cfg
files. If more than 4 pcie devices are passed through the needed root
ports are created on demand. This helps to keep live migration possible
without adding a new pve-q35*.cfg file.
For the windows 7 like guests additional addresses are reserved as well.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
This adds a new config option called `spice_enhancements` with two
optional settings:
* videostreaming
* foldersharing
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
we now also save the mtime of the binary and cache per binary (for each
arch; this is done so we have it already when we sometime decide
that we want to split the qemu package for each arch)
so that we get the real version if only pve-qemu-kvm was updated
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
The latest changes to our audio device implemenation [0] changed the
naming of the device id to "audio<id>" which in practice resulted in
"audio0".
This conflicts with the predefined audio device in the Q35 configs
that is also using "audio0". The result is that a VM with a
configured audio device and Q35 type will not start.
While we just would had removed the audio0 device if we had detected
this earlier in the new 4.0 q35 config, we cannot do so anymore due
to migration compatibility.
So rename the device from "audio$id" to audiodev$id".
Co-authored-by: Aaron Lauterer <a.lauterer@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Both flags were causing issues and have been made into optional flags to
be manually selected by the user if needed.
The supported flags have been merged into a single list for convenience.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
QEMU 4 adds the `-audiodev` parameter to explicitly specify the audio
backend. Setting it avoids occasional error messages when starting a
virtual machine with an audio device and qemu wants to connect it to the
physical audio device.
For now only SPICE is supported as it's also the biggest use case.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
die if we get some unknown value, which is either a bug (new dev type
added to enum but not here) or a user manual edit error, good to
ccatch both
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Until now audio devices had to be added manually with the `args` option
in the VMs config file. This adds a new config option to define an audio
device. It is called `audio0` with the extra `0` to be prepared should
we ever implement support for more than one audio device.
Supported devices are:
* ich9-intel-hda: Intel HD Audio Controller, emulates ICH9
* intel-hda: Intel HD Audio Controller, emulates ICH6
* AC97: useful for older OSs like Win XP
If any of the `intel-hda`s is selected two additional devices will be
created: hda-micro and hda-duplex. The `*intel-hda` controllers need at
least one of them as they emulate microphones and speakers (hda-micro)
or line in and out devices (hda-duplex).
Having both is deemed best practice to avoid problems if some software
needs one of the other kind of output/input ports.
I also cleaned up some old, commented out, code regarding audio devices.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
with qemu 4.0 we can make use of the new pcie-root-ports with settings
for the width/speed which can resolve issues with some hardware combinations
when negioating link speed
so we add a new q35 cfg that we include with machine types >= 4.0
to preserve live migration of machines without passthrough but q35
for details about the link speeds see:
pcie: Enhanced link speed and width support
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg02827.html
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
If 'now' is passed to the startdate option, the kvm start fails with
below failure.
kvm: invalid datetime format
valid formats: '2006-06-17T16:01:21' or '2006-06-17'
With this patch, 'now' is ignored and not passed to the rtcflags (-rtc).
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
e.g. local storage was considered not allowed for offline migration
even if it is available on all nodes, this should now be fixed as it
is now considered available on all nodes if a local storage isn't
restricted to a specific subset of the available nodes. The user is
responseable to make sure that the datacenter storage config reflects
the actual setup, so there is no additional check for local storages
which aren't available on all nodes if they are not explicitly marked
at datacenter level.
Signed-off-by: Tim Marx <t.marx@proxmox.com>
Regression from change allowing timeouts to be set, now shutting down
also works without timeouts again (previously qmp failed because of
the unknown "timeout" parameter passed to it).
We always delete the timeout value from the arguments, regardless of
truthiness. "delete" returns the deleted element, deleting a
non-existant hash entry returns undef, which is fine after this point:
"deleting non-existent elements returns the undefined value in their
corresponding positions."
- https://perldoc.perl.org/functions/delete.html
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
while it really should not pose an issue for live migrations lets be
on the safe side and also add this only with 3.1 or later machines
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Kernels 4.18+ (4.17+ for evmcs) support new Hyper-V enlightenments for
Windows KVM guests. QEMU supports these since 3.0 and 3.1 respectively.
tlbflush and ipi improve performance on overcommitted systems, evmcs
improves nested virtualization.
It's not entirely clear to me if Win7 already supports these, but since
it doesn't cause any performance penalties (and it works fine without
crashing, which makes sense either way, because Hyper-V enlightenments
are opt-in by the guest OS), enabling it regardless should be fine.
(As opposed to adding a new if branch for win8+)
Feature explanations to the best of my understanding:
hv_tlbflush allows the guest OS to trigger tlb shootdowns via a
hypercall. This allows CPUs to be identified via their vpindex (which
makes hv_vpindex a prerequisite to hv_tlbflush, but that is already
handled in our code). In overcommited configurations, where multiple
vCPUs reside on one pCPU, this increases performance of guest tlb
flushes, by only flushing each pCPU once. It also allows multiple tlb
flushes with only one vmexit.
hv_ipi allows sending inter-processor interrupts via vpindex, once again
making it a prerequisite. Benefits are pretty much as with tlbflush.
hv_evmcs is a VM control structure in L1 guest memory, allowing an L1 guest
to modify L2 VMCS and entering L2 without having the L0 host perform an
expensive VMCS update on trapping the nested vmenter.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The "guest-shutdown" guest agent call is blocking for some reason, so if
it fails (e.g. agent not installed on guest) only the default timeout of
10 minutes (see QMPClient.pm, sub cmd) would apply.
With this change, if (and only if) a timeout is specified via CLI/API,
it is used instead. In case it is not specified, behaviour stays the
same (default 10 min timeout).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This should help with the rare case where stop mode backups
fail to restart due to the $vmid.scope not being completely
gone when we want to restart. This queries systemd via dbus,
and if the scope is still there, awaits a UnitRemoved signal
for the scope from dbus.
For now with a 5 second timeout... (given that the processes
are already gone and it's really just waiting for systemd to
wake up, this should be plenty...)
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
to acutally allow to set the values requested by #2190 we need to
alter the limit a bit, as else the requested values cannot be save.
Just double it to 512, which should be really enough for this, else
go complain to your software vendor for needing such _hacks_ in the
first place..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
On some occasions e.g. license checking, the manufacturer string in the
SMBIOS settings edit has to allow characters such as whitespaces.
https://forum.proxmox.com/threads/proxmox-and-windows-rok-license-for-dell.53236/
In principle SMBIOS allows to pass any zero terminated string to the
corresponding fields in the structure type 1 (System Information).
By base64 encoding the values clashing of the config is avoided.
Relies on the corresponding patch to pve-manager to obtain base64 encoded values.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
for both vm_mon_cmd calls. under certain circumstances, the following
sequence of events can otherwise fail when live-migrating under load:
S...source node
T...target node
0: migration is complete, handover from S to T starts
1: S: logically move VM config file from S to T via rename()
2: S: rename returns, config file is (visibly) moved on S
3: S: trigger resume on T via mtunnel
4a: T: call vm_resume while config file move is not yet visible on T
4b: T: call vm_resume while config file move is already visible on T
4a instead of 4b means vm_mon_cmd will die in check_running unless
vm_mon_cmd_nocheck is used.
under heavy pmxcfs load and a slow cluster/corosync network, there can
be a few seconds of delay between 1 and 2, with a subsequent race ending in 4a
instead of 4b.
this issue was reported to occur on bulk migrations.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
cloudinit is just completely broken...
Until we rewrite this to a sane designe (i.e., never backup, mirror,
... any CI disk anywhere - the state is in the config and gets
created on start and deleted on stop anyway) do this..
Co-developed-by: Mira Limbek <m.limbek@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Resolves the issue of restoring a VM that has a cloudinit drive
configured to a new VMID. The VMID of the disk name gets now remapped
correctly and in the process the cloudinit disk is created with the same size
as in PVE/API2/Qemu.pm create_disks and in PVE/QemuServer/Cloudinit
commit_cloudinit_disk as the same constant is used.
This is done by matching any line starting with either 'ide', 'sata' or
'scsi' and then check if it is a cloudinit drive. As cloudinit drives
are attached as cdrom, only those 3 are possible. For the cloudinit
check we use 'parse_drive' followed by 'drive_is_cloudinit' so no custom
regex is necessary.
'--targetstorage' is also taken into account on restore now for
cloudinit disks. If a target storage is specified the format is either
kept if possible, or changed to the default of that storage.
This should fix#1807 completely. The restore error was already resolved
with commit 7e8ab2a, but the vmid of the disk might not have matched the new
one.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
