It is not yet supported for QEMU's vdagent device which is used for
the VNC clipboard.
The migration precondition API call will now treat the VNC clipboard
as a local resource. Thus the GUI blocks migration and shows:
"Can't migrate VM with local resources: clipboard=vnc"
QemuMigrate's prepare function will also abort live migration early
when using the VNC clipboard.
Signed-off-by: Markus Frank <m.frank@proxmox.com>
[FE: adapt commit message a bit]
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
We want to notify guest of the change, so it can resubmit dhcp request,
or send gratuitous arp,...
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
add one test case for a spice display and one for std
Signed-off-by: Markus Frank <m.frank@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
This can be used by noVNC to check if a clipboard is available.
Signed-off-by: Markus Frank <m.frank@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
add option to use the qemu vdagent implementation to enable the VNC
clipboard. When enabled with SPICE the spice-vdagent gets replaced
with the QEMU implementation.
This patch does not solve #1406, but does allow copy and paste with a
running X-session, when spice-vdagent is installed on the guest.
Signed-off-by: Markus Frank <m.frank@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Stefan Lendl <s.lendl@proxmox.com>
[ TL: extend subject and use more specific build-dir glob ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
While there already is a warning from QEMU proper, that one is not
visible as a task warning and it's not straightforward to make it be
one, because QEMU is started inside a run_fork(). It's also more
future-proof to have the detection explicit on our side and the
documentation can be referenced.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
by remembering the 'forcemachine' parameter that's passed along when
starting the target instance.
In preparation to introduce a call to get_current_qemu_machine after
starting a VM to check for machine version deprecation.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
by adding a comment and grouping the code better. See the PVE QEMU
patch "PVE: Allow version code in machine type" for reference. The way
the code was written previously made it look like a bug where
$pve_version might be overwritten multiple times.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
This can seemingly need a bit longer than expected, and better than
erroring out on migration is to wait a bit longer.
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
As the ha-manager accessed rather internal details before that
version, and the memory property changing to a format-string with sub
properties in 7f8c808 ("add memory parser") breaks that access, so
ensure the installed ha-manager is using the newer
get_derived_property method to access that information cleanly.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
The vCPUs are passed as devices with specific id only when CPU
hot-plug is enable at cold start.
So, we can't enable/disable allow-hotplug online as then vCPU hotplug
API will thrown errors not finding core id.
Not enforcing this could also lead to migration failure, as the QEMU
command line for the target VM could be made different than the one it
was actually running with, causing a crash of the target as Fiona
observed [0].
[0]: https://lists.proxmox.com/pipermail/pve-devel/2023-October/059434.html
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
[ TL: Reflowed & expanded commit message ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by including the errno. Might make it clearer what the issue is in
cases like: https://forum.proxmox.com/threads/135261/
Also add the missing newlines, the missing "to" in the second message,
switch to the more common "or die" and avoid line bloat while at it.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Fix races with ACPI-suspended VMs which could wake up during migration
or during a suspend-mode backup.
Revert prevention, of ACPI-suspended VMs automatically resuming after
migration, introduced by 7ba974a682. The commit introduced a
potential problem that causes a suspended VM that wakes up during
migration to remain paused after the migration finishes.
This can be fixed once QEMU preserves the 'suspended' runstate during
migration (current patch on the qemu-devel list [0]) by checking for
the 'suspended' runstate on the target after migration.
Furthermore the commit increased the race window during the
preparation of a suspend-mode backup, when a suspended VM wakes up
between the vm_is_paused check in PVE::VZDump::QemuServer::prepare and
PVE::VZDump::QemuServer::qga_fs_freeze. This causes the code to skip
fs-freeze even if the VM has woken up, potentially leaving the file
system in an inconsistent state.
To prevent this, do not treat the suspended runstate as paused when
migrating or archiving a VM.
[0]: https://lists.nongnu.org/archive/html/qemu-devel/2023-08/msg05260.html
Signed-off-by: Filip Schauer <f.schauer@proxmox.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
[ TL: massage in Fiona's extra info into commit message ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Since commit 2dc0eb61 ("qm: assume correct VNC setup in 'vncproxy',
disallow passwordless"), 'qm vncproxy' will just fail when the
LC_PVE_TICKET environment variable is not set. Since it is not only
required in combination with websocket, drop that conditional.
For the non-serial case, this was the last remaining effect of the
'websocket' parameter, so update the parameter description.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Since commit 3e7567e0 ("do not use novnc wsproxy"), the websocket
upgrade is done via the HTTP server.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Add checks for "suspended" and "prelaunch" runstates when checking
whether a VM is paused.
This fixes the following issues:
* ACPI-suspended VMs automatically resuming after migration
* Shutdown and reboot commands timing out instead of failing
immediately on suspended VMs
Signed-off-by: Filip Schauer <f.schauer@proxmox.com>
The default VM startup timeout is `max(30, VM memory in GiB)` seconds.
Multiple reports in the forum [0] [1] and the bug tracker [2] suggest
this is too short when using PCI passthrough with a large amount of VM
memory, since QEMU needs to map the whole memory during startup (see
comment #2 in [2]). As a result, VM startup fails with "got timeout".
To work around this, set a larger default timeout if at least one PCI
device is passed through. The question remains how to choose an
appropriate timeout. Users reported the following startup times:
ref | RAM | time | ratio (s/GiB)
---------------------------------
[1] | 60G | 135s | 2.25
[1] | 70G | 157s | 2.24
[1] | 80G | 277s | 3.46
[2] | 65G | 213s | 3.28
[2] | 96G | >290s | >3.02
The data does not really indicate any simple (e.g. linear)
relationship between RAM and startup time (even data from the same
source). However, to keep the heuristic simple, assume linear growth
and multiply the default timeout by 4 if at least one `hostpci[n]`
option is present, obtaining `4 * max(30, VM memory in GiB)`. This
covers all cases above, and should still leave some headroom.
[0]: https://forum.proxmox.com/threads/83765/post-552071
[1]: https://forum.proxmox.com/threads/126398/post-592826
[2]: https://bugzilla.proxmox.com/show_bug.cgi?id=3502
Suggested-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Friedrich Weber <f.weber@proxmox.com>
In preparation to add more properties to the memory configuration like
maximum hotpluggable memory and whether virtio-mem devices should be
used.
This also allows to get rid of the cyclic include of PVE::QemuServer
in the memory module.
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
[FE: also convert new usage in get_derived_property
remove cyclic include of PVE::QemuServer
add commit message]
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
moving qemu_{device,object}{add,del} helpers there for now.
In preparation to remove the cyclic include of PVE::QemuServer in the
memory module and generally for better modularity in the future.
No functional change intended.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
PVE::QemuServer::check_running() does both
PVE::QemuConfig::assert_config_exists_on_node()
PVE::QemuServer::Helpers::vm_running_locally()
The former one isn't needed here when doing hotplug, because the API
already assert that the VM config exists. It also would introduce a
new cyclic dependency between PVE::QemuServer::Memory <->
PVE::QemuConfig with the proposed virtio-mem patch set.
In preparation to remove the cyclic include of PVE::QemuServer in the
memory module.
No functional change intended.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
which is the only user of the parse_numa() helper. While at it, avoid
the duplication of MAX_NUMA.
In preparation to remove the cyclic include of PVE::QemuServer in the
memory module.
No functional change intended.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
10 minutes is not long enough when disks are large and/or network
storages are used when preallocation is not disabled. The default is
metadata preallocation for qcow2, so there are still reports of the
issue [0][1]. If allocation really does not finish like the comment
describing the timeout feared, just let the user cancel it.
Also note that when restoring a PBS backup, there is no timeout for
disk allocation, and there don't seem to be any user complaints yet.
The 5 second timeout for receiving the config from vma is kept,
because certain corruptions in the VMA header can lead to the
operation hanging there.
There is no need for the $tmp variable before setting back the old
timeout, because that is at least one second, so we'll always be able
to set the $oldtimeout variable to undef in time in practice.
Currently, there shouldn't even be an outer timeout in the first
place, because the only call path leading to here is via the create
API (also used by qmrestore), both of which don't set a timeout.
[0]: https://forum.proxmox.com/threads/126825/
[1]: https://forum.proxmox.com/threads/128093/
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
