storage_check_enabled simply checks for the 'disable' option and then calls
storage_check_node.
While not strictly necessary for a second call where only the storage differs,
e.g. in case of clone, it is more future-proof: if support for a target storage
is added at some point, it might be easy to miss adapting the call.
For the migration checks, the situation is improved by now always catching
disabled (target) storages.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Enables live-restore functionality using the 'alloc-track' QEMU driver.
This allows starting a VM immediately when restoring from a PBS
snapshot. The snapshot is mounted into the VM, so it can boot from that,
while guest reads and a 'block-stream' job handle the restore in the
background.
If an error occurs, the VM is deleted and all data written during the
restore is lost.
The VM remains locked during the restore, which automatically prohibits
any modifications to the config while restoring. Some modifications
might potentially be safe, however, this is experimental enough that I
believe this would cause more bad stuff(tm) than actually satisfy any
use cases.
Pool handling is slightly adjusted so the VM can be added to the pool
before the restore starts.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Commit abff03211f switched to iterating over the
values instead of the keys, but didn't update the variable name. Use target_sid,
because target is already in use for the target node.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
The existing check_vm_modify_config_perm doesn't do so anymore, but
the check only got re-added to the modify/delete paths. See commits
165be267eb and
e30f75c571 for context.
In the future, it might make sense to generalise the
check_vm_modify_config_perm and have it not only take keys, but both
new and old values, and use that generalised function everywhere.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
A fix for violating a important standard for booting[0] in recently
packaged QEMU 5.2 surfaced some issues with Windows based VMs in our
forum[1], which seem to be quite sensitive for such changes (it seems
they derive lots of their device assignment from ACPI).
User visible effects are loss of any network configuration due to
windows thinking it was swapped with a new one, and starts with a
fresh config - this is mostly problematic for setups with static
address assignment.
There may be lots of other, more subtle, effects and the PVE admin is
also not always the VM admin, so we really need to avoid such
negative effects. Do this by pinning the version of any windows based
VMs to either the minimum of (5.1, kvm-version) for existing VMs or
the kvm-version at time of VM creation for new ones.
There are patches in pve-manager for user to be able to change the
pinned version themself in the webinterface, so this can now also get
adapted more easily if there surface any other issues (with new or
old version) in the future.
0: https://lists.gnu.org/archive/html/qemu-devel/2021-02/msg08484.html
1: https://forum.proxmox.com/threads/warning-latest-patch-just-broke-all-my-windows-vms-6-3-4-patch-inside.84915/page-2#post-373331
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Since CDRoms and disks share the same config keys, we need to check if
it actually is a CDRom and then check the permissions accordingly.
Otherwise it is possible for someone without VM.Config.CDROM
permissions, but with VM.Config.Disk permissions to remove a CD drive
while being unable to create a CDRom drive.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
by checking if the vm is paused at the beginning and skipping the
resume now we also skip the qga freeze/thaw (which cannot work if the
vm is paused)
moved the 'vm_is_paused' sub from the api to PVE/QemuServer.pm so it
is available everywhere we need it.
since a suspend backup would pause the vm anyway, we can skip that
step also
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Fabian Ebner <f.ebner@proxmox.com>
Since an old change released with a version bump on 2009-09-07, we
search all enabled storages for VMID maching volumes on VM removal
and purge those too.
This has multiple pitfalls and may be quite unexpected for some
users.
It can make problems when:
* on recovery a VM is created, before disks are reattached the admin
notices some settings issues and chooses to just recreate the VM;
but during destroying the dummy VM all related disks get destroyed
unconditionally which may result in data loss. This actually
happened and is the original reason for the decision to change
this.
* a storage is shared between PVE instance (between a set of clusters
and/or single nodes), while this is against our rules it may still
come as a surprise if destroying a VM on node A may destroy
unrelated and unreferenced disks on the unrelated node B without
asking or allowing to avoid that.
As this the removal of matching but unreferenced disks can result in
permanent data loss (up to the last backup) and may be to subtle and
unforgiving, allow to opt-out of it.
In the long run we want to make this opt-in, but that is an API
change and so needs to wait for next major release. But, we can adapt
the GUI already to make it opt-in there, catching most of the cases.
side-note: CT do not have this behavior at all
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
showing off it's monstrosity of a method signature, needs to be
cleaned up in a followup commit
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
No need to warn twice, so the warning from the outside check
was removed.
Suggested-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
All volumes contained in $vollist are activated. In this case a snapshot
of the volume. For cloudinit disks no snapshots are created so don't add
it to the list of volumes to activate as it otherwise fails with no
logical volume found.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
The API is updated to handle the deprecation correctly, i.e. when
updating the 'order' attribute, the old 'legacy' (default_key) values
are removed (would now be ignored anyway).
When removing a device that is in the bootorder list, it will be removed
from the aforementioned. Note that non-existing devices in the list will
not cause an error - they will simply be ignored - but it's still nice
to not have them in there.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
(also fixes#3011)
Deprecates the old-style 'boot' and 'bootdisk' options by adding a new
'order=' subproperty to 'boot'.
This allows a user to specify more than one disk in the boot order,
helping with newer versions of SeaBIOS/OVMF where disks without a
bootindex won't be initialized at all (breaks soft-raid and some LVM
setups).
This also allows specifying a bootindex for USB and hostpci devices,
which was not possible before. Floppy boot support is not supported in
the new model, but I doubt that will be a problem (AFAICT we can't even
attach floppy disks to a VM?).
Default behaviour is intended to stay the same, i.e. while new VMs will
receive the new 'order' property, it will be set so the VM starts the
same as before (using get_default_bootorder).
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This allows setting ciuser, cipassword and all other cloudinit settings that
are not part of the network without VM.Config.Network permissions.
Keep VM.Config.Network still as fallback so custom roles that add
VM.Config.Network but not VM.Config.Cloudinit don't break.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
should not really happen on modern systems, but random_bytes just
returns false if it fails to generate random bytes, in which case we
want to die instead of returning an empty 'random' string.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
We used the VNC API $ticket as password for VNC, but QEMU limits the
password to the first 8 chars and ignores the rest[0].
As our tickets start with a static string (e.g., "PVE") the entropy
was a bit limited.
For Proxmox VE this does not matters much as the noVNC viewer
provided by has to go always over the API call, and so a valid
ticket and correct permissions for the requested VM are enforced
anyway.
This patch helps external users, which often use NoVNC-Websockify,
circumventing the API and relying solely on the VNC password to avoid
snooping on VNC sessions.
A 'generate-password' parameter is added, if set a password from good
entropy (using libopenssl) is generated.
For simplicity of mapping random bits to ranges we extract 6 bit of
entropy per character and add the integer value of '!' (first
printable ASCII char) to that. This way we get 64^8 possibilities,
which even with millions of guesses per second one would need years
of guessing and mostly just DDOS the server with websocket upgrade
requests.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Tested-By: Dominik Csapak <d.csapak@proxmox.com>
Reviewed-By: Dominik Csapak <d.csapak@proxmox.com>
'vga' is a property string, we can't just assume it starts with the default key's value here either.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
'vga' is a property string, we can't just assume it starts with the
default key's value.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
when checking whether a to-be-added drive's and the VM's replication
status are matching. otherwise, we end up in a failing generic
'parse_volume_id' with no mention of the actual reason.
adding 'replicate=0' to the new drive string fixes the underlying issue
with and without this patch, so this is just a cosmetic/usability
improvement.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Explicitly allows changing other properties than the cputype, even if
the currently set cputype is not accessible by the user. This way, an
administrator can assign a custom CPU type to a VM for a less privileged
user without breaking edit functionality for them.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
and move the lock call and decision logic closer together
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Tested-by: Fabian Ebner <f.ebner@proxmox.com>
This reverts commit b5490d8a98.
When resizing a volume of a running VM, a qmp block_resize command
is issued. This is non-blocking, so the size on the storage immediately
after issuing the command might still be the old one.
This is part of the issue reported in bug #2621.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
this is only used for migration via 'qm mtunnel', regular users should
never need to resume a VM that does not logically belong to the node it
is running on
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
It was necessary to move foreach_volid back to QemuServer.pm
In VZDump/QemuServer.pm and QemuMigrate.pm the dependency on
QemuConfig.pm was already there, just the explicit "use" was missing.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Just like with live-migration, custom CPU models might change after a
snapshot has been taken (or a VM suspended), which would lead to a
different QEMU invocation on rollback/resume.
Save the "-cpu" argument as a new "runningcpu" option into the VM conf
akin to "runningmachine" and use as override during rollback/resume.
No functional change with non-custom CPU types intended.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This is required to support custom CPU models, since the
"cpu-models.conf" file is not versioned, and can be changed while a VM
using a custom model is running. Changing the file in such a state can
lead to a different "-cpu" argument on the receiving side.
This patch fixes this by passing the entire "-cpu" option (extracted
from /proc/.../cmdline) as a "qm start" parameter. Note that this is
only done if the VM to migrate is using a custom model (which we can
check just fine, since the <vmid>.conf *is* versioned with pending
changes), thus not breaking any live-migration directionality.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
both where previously missing. the existing 'check_storage_access'
helper is not applicable here since it operates on a full set of VM
config options, not just storage IDs.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
the syntax is backwards compatible, providing a single storage ID or '1'
works like before. the new helper ensures consistent behaviour at all
call sites.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
