removes safe_string_ne and safe_num_ne code which is now shared in
GuestHelpers. also change all the calls to use the shared definitions.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
This fixes an issue when migrating a VM with an unused volume with format
qcow2 or vmdk. Since 'snapshots' wasn't set, storage_migrate wanted to
export/import with format raw+size instead. Therefore it used (instead of
just 'dd') 'qemu-img convert', which fails when its output leaves through
a pipe. Upon importing, a second error is present, because the format from
the volume ID doesn't match the format of the stream and there is no
conversion yet.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
LGTM-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
If for whatever reason there is no size in the property string
of a drive, 'qm rescan' would do nothing for that drive and
live migration would also fail.
Also adds a check to avoid potential auto-vivification of volid_hash->{$volid}
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
The initialization for the drive keys in $confdesc is changed
to be a single for-loop iterating over the keys of $drivedesc_hash and
the initialization of the unusedN keys is move to directly below it.
To avoid the need to change all the call sites, functions with more than
a few callers are exported from the submodule and imported into QemuServer.pm.
For callers of the now imported functions within QemuServer.pm, the prefix
PVE::QemuServer is dropped, because it is unnecessary and now even confusing.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
which contains the full descriptions of the drives, and
make parse_drive not depend on $confdesc anymore.
In preparation to moving drive-related code to its own module.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Allow a user to add a virtio-rng-pci (an emulated hardware random
number generator) to a VM with the rng0 setting. The setting is
version_guard()-ed.
Limit the selection of entropy source to one of three:
/dev/urandom (preferred): Non-blocking kernel entropy source
/dev/random: Blocking kernel source
/dev/hwrng: Hardware RNG on the host for passthrough
QEMU itself defaults to /dev/urandom (or the equivalent getrandom()
call) if no source file is given, but I don't fully trust that
behaviour to stay constant, considering the documentation [0] already
disagrees with the code [1], so let's always specify the file ourselves.
/dev/urandom is preferred, since it prevents host entropy starvation.
The quality of randomness is still good enough to emulate a hwrng, since
a) it's still seeded from the kernel's true entropy pool periodically
and b) it's mixed with true entropy in the guest as well.
Additionally, all sources about entropy predicition attacks I could find
mention that to predict /dev/urandom results, /dev/random has to be
accessed or manipulated in one way or the other - this is not possible
from a VM however, as the entropy we're talking about comes from the
*hosts* blocking pool.
More about the entropy and security implications of the non-blocking
interface in [2] and [3].
Note further that only one /dev/hwrng exists at any given time, if
multiple RNGs are available, only the one selected in
'/sys/devices/virtual/misc/hw_random/rng_current' will feed the file.
Selecting this is left as an exercise to the user, if at all required.
We limit the available entropy to 1 KiB/s by default, but allow the user
to override this. Interesting to note is that the limiter does not work
linearly, i.e. max_bytes=1024/period=1000 means that up to 1 KiB of data
becomes available on a 1000 millisecond timer, not that 1 KiB is
streamed to the guest over the course of one second - hence the
configurable period.
The default used here is the same as given in the QEMU documentation [0]
and has been verified to affect entropy availability in a guest by
measuring /dev/random throughput. 1 KiB/s is enough to avoid any
early-boot entropy shortages, and already has a significant impact on
/dev/random availability in the guest.
[0] https://wiki.qemu.org/Features/VirtIORNG
[1] https://git.qemu.org/?p=qemu.git;a=blob;f=crypto/random-platform.c;h=f92f96987d7d262047c7604b169a7fdf11236107;hb=HEAD
[2] https://lwn.net/Articles/261804/
[3] https://lwn.net/Articles/808575/
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The http-server has a 64KB payload limit for post requests, so note
that explicit even if it's a theoretical maximum as the reamainig
params also need some space in the request
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
'input-data' can be used to pass arbitrary data to a guest when running
an agent command with 'guest-exec'. Most guest-agent implementations
treat this as STDIN to the command given by "path"/"arg", but some go as
far as relying solely on this parameter, and even fail if "path" or
"arg" are set (e.g. Mikrotik Cloud Hosted Router) - thus "command" needs
to be made optional.
Via the API, an arbitrary string can be passed, on the command line ('qm
guest exec'), an additional '--pass-stdin' flag allows to forward STDIN
of the qm process to 'input-data', with a size limitation of 1 MiB to
not overwhelm QMP.
Without 'input-data' (API) or '--pass-stdin' (CLI) behaviour is unchanged.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
1. Avoids the error
"VM 111 qmp command 'block_resize' failed - The new size must be a multiple of 512"
for qcow2 disks.
2. Because volume_import expects disk sizes to be a multiple of 1 KiB.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Machines running with SeaBIOS don't have the efidisk attached, so QEMU
cannot back it up and fails with "unknown drive".
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Some of the recent QMP changes require at least 2.8.0, but since the
oldest version we officially package for 6.x is 4.0.0 anyway, checking
for at least 3.0 should not break anyone's setup.
Note that this does not affect machine version checks, only the
installed QEMU binary version.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Live-migrating a VM with more than 14 SCSI disks to a node that doesn't
support it yet is broken. Use a bumped pve-version to represent that and
give the user a nice error message instead.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The previously introduced approach can fail for pinned versions when a
new QEMU release is introduced. The saner approach is to use a mapping
that gives one pve-version for each QEMU release.
Fortunately, the old system has not been bumped yet, so we can still
change it without too much effort.
QEMU versions without a mapping are assumed to be pve0, 4.1 is mapped to
pve1 since thats what we had as our default previously.
Pinned machine versions (i.e. pc-i440fx-4.1) are always assumed to be
pve0, for specific pve-versions they'd have to be pinned as well (i.e.
pc-i440fx-4.1+pve1).
The new logic also makes the pve-version dynamic, and starts VMs with
the lowest possible 'feature-level', i.e. if a feature is only available
with 4.1+pve2, but the VM isn't using it, we still start it with
4.1+pve0.
We die if we don't support a version that is requested from us. This
allows us to use the pve-version as live-migration blocks (i.e. bumping
the version and then live-migrating a VM which uses the new feature (so
is running with the bumped version) to an outdated node will present the
user with a helpful error message and fail instead of silently modifying
the config and only failing *after* the migration).
$version_guard is introduced in config_to_command to use for features
that need to check pve-version, it automatically handles selecting the
newest necessary pve-version for the VM.
Tests have to be adjusted, since all of them now resolve to pve0 instead
of pve1. EXPECT_ERROR matching is changed to use 'eq' instead of regex
to allow special characters in error messages.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Because of alignment and rounding in the storage backend, the effective
size might not match the 'newsize' parameter we passed along.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
query-cpus has been deprecated since 2.12.0 [0] in favor of
query-cpus-fast, which no longer incurs a guest performance penalty on
the guest. The returned information is the same as far as our use case
is concerned.
[0] https://qemu.weilnetz.de/doc/qemu-doc.html#Deprecated-features
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
migrate_set_downtime, migrate_set_speed and migrate-set-cachesize have
all been deprecated since 2.8 or 2.11 [0]. They still work, but no
reason not to use the correct version.
Note that the downtime-limit parameter switched from seconds to
milliseconds, so convert to that. Slightly improve log output with units
while at it.
[0] https://qemu.weilnetz.de/doc/qemu-doc.html#Deprecated-features
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
'device' is deprecated since 2.8 in favor of 'id' [0], but since we
always consistently set the id on our drives anyway we can substitute it
easily.
[0] see files qapi/block.json and qapi/block-core.json in QEMU source
code, the online documentation doesn't mention it AFAICT
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
...and cleanup surrounding code a bit.
'change' is deprecated, and according to the qapi definition in QEMU it
is 'strongly recommended' to avoid using it.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
The description for vm_config was out of date and from the description
for vm_pending it was hard to tell what the difference to vm_config was.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
regression introduced with commit a85ff91b
previously we set $target to undef if it's localnode or localhost, then
we check if node exists.
with regression commit, behaviour changes as we do the node check in
else, but $target may be undef. this causes an error:
no such cluster node ''
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
improved readability
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
to achieve this we have to add 3 new scsihw addresses since lsi
controllers can only hold 7 scsi drives
we go up to 31, since this is the limit for virtio-scsi-single devices
we have reserved (we can increase this in the future)
to make it more future proof, we add a new pci bridge under pci
bridge 1, so we have to adapt the bridge adding code (we did not
need this for q35 previously)
impact on live migration:
since on older versions of qemu-server we do not have those config
settings, there is no problem from old -> new
new->old is not supported anyway and this breaks so that
the vm crashes and loses the configs for scsi15-30
(same behaviour as e.g. with audio0 and migration from new->old)
tested with 31 scsi disk on
i440fx + virtio-scsi
i440fx + lsi
q35 + virtio-scsi
q35 + lsi
with ovmf + seabios
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
and adapt the tests
this does not impact live migration, since the order here does not
change the device layout
we want this to consistently have the readconfig first
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
VM.Audit can see the current config and the list of snapshots
already, so there is no real reason to disallow
the config of snapshots
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
from hotplug_pending we go into 'vmconfig_update_disk', where we check the
hotpluggability of options.
add 'ssd' there as a non-hotpluggable option (since we'd have to unplug/plug to
change the drive type)
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
The package will be used for custom CPU models as a SectionConfig, hence
the name. For now we simply move some CPU related helper functions and
declarations over from QemuServer to reduce clutter there.
Exports are to avoid changing all call sites, functions have useful
names on their own.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
As 'qemu_img_format' just matches a regex, this doesn't make much of
a difference, but AFAICT all other calls of 'qemu_img_format' use 'volname'.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
since we handle errors gracefully now, we don't need to write & save
config every time we change a setting.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
get_basic_machine_info was removed by commit 045749f2fc.
Use get_host_arch to get the default machine type instead, and
optionally allow to specify architecture as parameter.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
This is the guarantee that this call operates on it's created config.
A VMID cannot be reused afterall. So only remove the guarantee at the
last step, just before throwing up the error message about the clone
failure.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
We clone the source VM firewall config before forking the "realcmd"
worker, but did not mind cleaning it up again if the clone failed
somewhere in the worker.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
* query_understood_cpu_flags returns all flags that QEMU/KVM knows about
* query_supported_cpu_flags returns all flags that QEMU/KVM can use on
this particular host.
To get supported flags, a temporary VM is started with QEMU, so we can
issue the "query-cpu-model-expansion" QMP command. This is how libvirt
queries supported flags for its "host-passthrough" CPU type.
query_supported_cpu_flags is thus rather slow and shouldn't be called
unnecessarily.
Note that KVM and TCG accelerators provide different expansions for the
"host" CPU type, so we need to query both.
Currently only supports x86_64, because QEMU-aarch64 doesn't provide the
necessary querying functions.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
wrap around code which can possibly fail in evals to handle them
gracefully, and log errors.
note: this results in a change of behavior in the API. since errors
are handled gracefully instead of "die"ing, when there is a pending
change which cannot be applied for some reason, it will get logged in
the tasklog but the vm will continue booting regardless. the
non-applied change will stay in the pending section of the
configuration.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
instead of writing the config after every change, we can do it once for
all the changes in the end to avoid redundant i/o.
we also don't need to load_config after writing fastplug changes.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Do the same as for the "create" case, only trigger the "start after
create/restore" task after the locked "realcmd" was done. Else, the
start can never succeed, it also acquires a lock, but restore only
release it once outside of realcmd.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
bump versioned build-dependency, as qemu-server has tests checking
for errors, and we fixed an grammar error in pve-storage, so we need
the newer version to ensure our test go through
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
run_command only passes defined and chomped strings to the callback,
so no need to do that twice.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
QEMU usually only prints warnings and errors and stays silent otherwise,
so it makes sense to just log all of it's output.
Prefix it with '[<target_hostname>]' to indicate that the output is
coming from the remote node, so users know where to search for the
error.
Side effect is that the 'VM start' task created by the migration will
now show the "QEMU:" prefix, but it's still very readable IMHO.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
By default run_command prints the entire commandline executed when an
error occurs, but QEMU and our migrate command are not only
uninteresting to the user[*] but also annoyingly long. Hide them and only
print the exit code.
[*] Especially our migrate command, since it can't be manually executed
anyway. QEMU's commandline *might* contain something interesting, but is
so long that it's tricky to parse anyway, any a user can always call 'qm
showcmd --pretty'.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Split out 'update_disksize' from the renamed 'update_disk_config' to
allow code reuse in QemuMigrate.
Remove dots after messages to keep style consistent for migration log.
After updating in sync_disks (phase1) of migration, write out updated
config. This means that even if migration fails or is aborted in later
stages, we keep the fixed config - this is not an issue, as it would
have been fixed on the next attempt anyway, and it can't hurt to have
the correct size instead of a wrong one either way.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
only VM.PowerMgmt is not enough, since we allocate space on a storage,
so we need VM.Config.Disk on the vm and Datastore.AllocateSpace on the storage
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the user set a device as hostpci with the 'shorthand' syntax:
hostpciX: 00:12
we ignored it on starting and showcmd and continued.
Since the user explicitly wanted to passthrough a device, we now check
if there is actually a device with that id
for explicitly configured devices (00:12.1), we did not check if it exists,
but the kvm call failed with a non-obvious error message
now we always call 'lspci' from SysFSTools to check if it actually exists,
and fail if not. With this, we can drop the workaround for adding
'0000' if no domain was given, since lspci does it already for us
this fixes#2510, an issue with using mediated devices where the users did not have
the domain in the config, since we forgot to add the default domain there
the only issue with this patch is that it changes the behaviour of
'showcmd' slightly, as in now, we die if the device was explicitly
given, but did not exists (we showed the commandline, now we fail)
this also slightly changes the commandline for qemu (adding always
the domain), which is not a problem since we cannot live migrate
or snapshot such vms, but we have to adapt the tests
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
some storage backends have bigger granularity than the default 128k
size from the EFIVARS template file, so we actually need to poll the
real created disk size, as it will be used to create the target
volume for local storage migration on running VMs, if it's to small
the target will be to small and migration will fail.
Just a fix for newly created EFIDISKS, for others we need to rescan
the size after we've got the migrate lock and write the updated info
out, so that the target node has the correct one (protected from
migrate lock).
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Sometimes, a user wants to remove the 'suspended' state without
resuming the vm from that state. Since the vm is locked with
'suspended', this was not possible without help from root@pam
This patch allows to delete the vmstate and the suspended lock and
related config entries with it. The user still has to have the right
priviliges and the vm cannot be 'protected' for this to work
Inspired-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
we did not actually delete the state if we deleted the 'vmstate' config,
leaving stray vmstates on the disks
actually implement the removal, requiring 'VM.Config.Disk' and
'VM.PowerMgmt' privs
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if a user removed the vmstate from the config for whatever reason,
a vmstart did not remove the 'suspended' lock
so always delete it and delete the vmstate only if it really was there
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
while it's a disk from our storage POV, in QEMU it's a pflash, and
those cannot be hot-plugged
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
With our QEMU 4.1.1 package we can pass a additional internal version
to QEMU's machine, it will be split out there and ignored, but
returned on a QMP 'query-machines' call.
This allows us to use it for increasing the granularity with which we
can roll-out HW layout changes/additions for VMs. Until now we
required a machine version bump, happening normally every major
release of QEMU, with seldom, for us irrelevant, exceptions.
This often delays rolling out a feature, which would break
live-migration, by several months. That can now be avoided, the new
"pve-version" component of the machine can be bumped at will, and
thus we are much more flexible.
That versions orders after the ($major, $minor) version components
from an stable release - it can thus also be reset on the next
release.
The implementation extends the qemu-machine REGEX, remembers
"pve-version" when doing a "query-machines" and integrates support
into the min_version and extract_version helpers.
We start out with a version of 1.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reviewed-by: Stefan Reiter <s.reiter@proxmox.com>
if we don't know which format the source volume/file has, let qemu-img
decide.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
or any other variant of the word 'pending'.
note that we can actually allow this snapshot after PVE 7.0, since
pending section and snapshots will be properly namespaced.
([pve:pending] and [snap:$snapname] or similar).
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
'pve-qm-machine' is auto-registered, but for re-use for a new
runningmachine we added the newer pve-qemu-machine standard option.
Use that one to avoid confusion.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
With the noerr flag set in parse_volume_id we have to check if
$volname is defined before comparing it to 'cloudinit'.
Signed-off-by: Mira Limbeck <m.limbeck@proxmox.com>
this is useful as meta information for e.g., provisioning or config
management systems
adding the info also to the 'status' api call to make it easier to show
it in the gui
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
...into:
* PVE::QemuServer::Helpers::min_version: check a major.minor version
string with a given major/minor version (this is equivalent to calling
the old qemu_machine_feature_enabled with only $kvmver)
* PVE::QemuServer::Machine::extract_version: get major.minor version
string from arbitrary machine type (e.g. pc-q35-4.0, ...)
* PVE::QemuServer::Machine::machine_version: helper to call
extract_version automatically before min_version
Includes a cfg2cmd test case with pinned machine version.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
...PVE::QemuServer::Machine.
qemu_machine_feature_enabled is exported since it has a *lot* of users
in PVE::QemuServer and a long enough name as it is.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
QMP and monitor helpers are moved from QemuServer.pm.
By using only vm_running_locally instead of check_running, a cyclic
dependency to QemuConfig is avoided. This also means that the $nocheck
parameter serves no more purpose, and has thus been removed along with
vm_mon_cmd_nocheck.
Care has been taken to avoid errors resulting from this, and
occasionally a manual check for a VM's existance inserted on the
callsite.
Methods have been renamed to avoid redundant naming:
* vm_qmp_command -> qmp_cmd
* vm_mon_cmd -> mon_cmd
* vm_human_monitor_command -> hmp_cmd
mon_cmd is exported since it has many users. This patch also changes all
non-package users of vm_qmp_command to use the mon_cmd helper. Includes
mocking for tests.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
vm_exists_on_node in PVE::QemuConfig checks if a config file for a vmid
exists
vm_running_locally in PVE::QemuServer::Helpers checks if a VM is running
on the local machine by probing its pidfile and checking /proc/.../cmdline
check_running is left in QemuServer for compatibility, but changed to
simply call the two new helper functions.
Both methods are also correctly mocked for testing snapshots.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
parse_cmdline is required for upcoming changes related to custom CPU
types and live migration, and this way we can re-use existing code.
Provides the necessary infrastructure to parse QEMU /proc/.../cmdline.
Changing the single user (check_running) is trivial too.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Also remove unused $confdir variable in QemuConfig, but leave it and
$lock_dir there, since those paths should only be used with
cfs_config_path anyway.
nodename() is still called in multiple places, but since it's cached by
INotify it doesn't really matter.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
found no use with tree-wide search, so remove:
* nic_models
* os_list_description
Both were introduced before the import to SVN happened.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Out code behaves like either l26 or other when the ostype is
undefined, both are not common as our webinterface _always_ sets the
ostype.
If one configured QXL with a VM as output device but does not has an
ostype set, and that works without "max_outputs=4" it really should
work with none too.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
with pve-qemu-4.0.1-3 or higher it was not possible in a spice remote
session to enable more displays on the fly in linux guests.
Adding the `max_outputs` parameter to the qxl device manually restores
the functionality.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
While we may not want to copy the cloudinit disk/drive, we still need
to create+allocate the volume, else the next start complains about a
missing CI drive..
fixes commit 7d6c99f0a0.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
This adds an extra field to agent_fmt that specifes the type of guest
agent connection to use. Currently there is no choice, and defaults to
virtio-serial. Since qemu-ga also runs over isa-serial, this allows OSes
such as NetBSD and OpenBSD, which do not have support for virtio-serial,
to run a qemu-ga.
This is an optional field, which leaves the default as virtio-serial. As
it doesn't change the default, it will require no change to older
configuration files.
Signed-off-by: Matt Dunwoodie <ncon@noconroy.net>
Show storages configured for the target node and not for the current one
because they can be different.
Duplicated the `complete_storage` sub and extended it to extract the
targetnode from the parameters to pass it into the storage_check_enabled
function.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
since PVE::Cluster::get_local_migration_ip does not exist anymore. this
is basically an inlined version, since this is the only remaining caller
that we actually want to keep.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
We are in the QemuServer package not in LXC, so use the correct
package for the Config, namely QemuConfig
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the reboot request is only cleaned in the vm_start path, so if reboot
fails for some reason, the request still exists. this causes an
unintentional reboot when a shutdown/stop/hibernate is called.
to mitigate, we can just clear the reboot request in case of an error.
Signed-off-by: Oguz Bektas <o.bektas@proxmox.com>
SHA-512 crypted passwords are longer than 64 byte, and it also does
not make sense to limit passwords to such a short length. Increase
to 1024, that should be enough for a while, but still limits maximal
password payload to avoid DOS or the like.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
This brings qemu more in line with containers, and it's nicer to
allow passing the replacement config if we want to keep it, instead
of setting a "memory: 128" config.
Use that to lock it on removal before final deletion, and on legacy
tar archive restore, in between old VM destruction and new
restoration.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
it has some potential semantic change too, i.e., the Storage
vdisk_list call is not wrapped by eval anymore, put as
we did some (unguarded) storage things before that call I'd say that
that does not matters much..
We try to clean all unused disks too, even if one deletion fails
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
When calling qmrestore a config file is created and locked with a lock
property. The following destroy_vm has been impossible as skiplock has not
been set.
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
Explicitly close leftover connections in the destructor,
otherwise the IO::Multiplex instance can be leaked causing
the qmp connection to never be closed.
This could occur for instance when cancelling vzdump with
ctrl+c with extremely unlucky timing...
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
as else one has no idea what the imported disk is, especially if
multiple unused disks are already present..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
mixed with indentation changes a whole lot of other changes which
should normally not mixed to much together, but this is all a bit
tangled and I'm not sure if splitting it into two or three parts
would help anybody.. just use "-w" (ignore whitespace changes) when
looking at the diff..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Previously a VMID conflict was possible when creating a VM on another node
between locking the config with lock_config_full and writing to it for the
first time with write_config.
Using create_and_lock_config eliminates this possibility. This means that now
the "lock" property is set in the config instead of using flock only.
$param was empty when it was assigned the three values "name", "memory" and
"cores" before being assigned to $conf later on. Assigning those values
directly to $conf avoids confusion about what the two variables contain.
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
Functions like qm importovf can now set the "lock" property in a config file
before calling do_import.
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
This function has been used in one place only into which we inlined its
functionality. Removing it avoids confusion between vm_destroy and vm_destroy.
The whole $importfn is executed in a lock_config_full.
As a consequence, for the inlined code:
1. lock_config is redundant
2. it is not possible that the VM has been started (check_running) in the
meanwhile
Additionally, it is not possible that the "lock" property has been written into
the VM's config file (check_lock) in the meanwhile
Add warning after eval so that it does not go unnoticed if it ever comes into
action.
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
The codepath for "any" hugepages did not check if memory size was even,
leading to the code below trying to allocate half a hugepage (e.g. VM
with 2049MiB RAM would lead to 1024.5 2kB hugepages).
Also improve error message for systems with only 1GB hugepages enabled.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
with qemu 4.0.1, there is now a machine type pc-q35-4.0.1 which does not fit
into our regex
this broke live migration of q35, as we give the machine type (incl version
info) to 'qm start' on the target node, which checks it against the
JSONSchema
to fix this, extend the regex to allow any number of version levels,
for q35, i440fx and virt (to be more future proof)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
As mentioned on the mailing list [0] disks owned by the VM and unused
disks should be removed before the config file is removed.
[0] https://pve.proxmox.com/pipermail/pve-devel/2019-October/039593.html
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
