Use the same validation as the guest creation wizards do to catch
errors early, before sending the API request.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
As reported in the community forum[0], as opposed to VM/LXC creation,
there is no validation for the name in the clone dialog. Use the same
validation as the guest creation wizards do to catch errors early,
before sending the API request.
[0]: https://forum.proxmox.com/threads/125883/#post-549304
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
If a user is accessing the Ceph panel via Datacenter -> Ceph, then the
install & config wizard might be shown. The nodename that is passed to
the wizard will decide the ID of the initial MON and MGR services.
Therefore, don't fall back to 'localhost' but the actual name of the
node to which we are connected to. The result will be that the first MON
and MGR will have the expected ID instead of 'localhost'.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
- improve variable definition/use locality
- avoid some if's for some (mostly boolean) assignments, just use an
expression
As long as we don't go overboard with code golfing it to extremely
terse, shorter code is always more readable, especially if
definition/use happens not dozens of lines apart.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
'selectPoolMembers' will be called when the poolid field changes.
(That can even happen when the mode is not even 'pool') Due to how
the fields are set, there is a race condition that this will be
called after the remaining fields were set up, including the VM list
that might have entries selected.
Since the first thing we do here is to deselect all, this wiped the
virtual guest selection sometimes.
To fix it, check if we're actually in the correct mode before doing
anything.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
The pve_verify_cidr{,v4,v6} functions were originally intended for
the /etc/network/interfaces API endpoints and thus are a bit
restrictive. For example, as reported in the community forum[0],
pve_verify_cidr() does not consider '0::/0' and '0::/1' to be valid.
The error message in this scenario being
> value does not look like a valid CIDR network
is also confusing, as the first thought of users will be that it comes
from the passed-in monitor address.
The public networks are not written here and read from the Ceph config
and via a RADOS mon command, so no need to try and verify them. If
something really would go wrong during parsing, the
get_local_ip_from_cidr() call would complain afterwards.
[0]: https://forum.proxmox.com/threads/125226/
Suggested-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Sometimes it can be quite useful to know when exactly a system report
was generated. Adds the following output quite prominently in the
general system info section:
# date -R
Thu, 23 Feb 2023 16:21:12 +0100
Signed-off-by: Lukas Wagner <l.wagner@proxmox.com>
If we just pass the me.reload as function reference it won't be
executed with `this` being the view controller, so call it directly
on that instead.
Reported-by: Stefan Hanreich <s.hanreich@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Having "Color" added makes it easier to translate (i.e. Farbschema,
配色) and at least as understandable as Theme, so change it,
Suggested-by: Markus Frank <m.frank@proxmox.com>
[ T: while Markus suggested Color Scheme, the hive-mind opted for
this ]
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
if a job has no schedule and is executed via "Schedule now" but fails, the
following will be printed to journal/syslog:
Mar 21 13:05:01 host02 pvescheduler[203343]: send/receive failed, cleaning up snapshot(s)..
Mar 21 13:05:01 host02 pvescheduler[203343]: 100-0: got unexpected replication job error - command 'set -o pipefail && pvesm export local-zfs:vm-100-disk-0 zfs - -with-snapshots 1 -snapshot __replicate_100-0_1679400300__ | /usr/bin/ssh -e none -o 'BatchMode=yes' -o 'HostKeyAlias=host03' root@10.0.74.3 -- pvesm import local-zfs:vm-100-disk-0 zfs - -with-snapshots 1 -snapshot __replicate_100-0_1679400300__ -allow-rename 0' failed: exit code 255
Mar 21 13:05:01 host02 pvescheduler[203343]: Use of uninitialized value in concatenation (.) or string at /usr/share/perl5/PVE/API2/Replication.pm line 107.
defaulting to the fallback schedule '*/15' makes the spurious warning go away.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
The change handler of the edit config from a displayEditField still
triggers, even if hidden and disabled. This then enables another
editConfig part of a displayEditField, which triggers an error in the
API.
To fix that, simply check if this field is disabled before setting
the other fields value
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Seemingly, an empty array is special for Ext JS, and if we push into
it, we overwrite the class definition of that property.
This does not happen when something is already in the array, so the
other edit windows work as expected
To fix it here, remove the empty array entirely, since we already
create an empty one when we need it
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Consolidating the different config paths lets us add more as needed
without polluting our API with too many 'configxxx' endpoints.
The config and configdb paths are renamed under the ceph/cfg path:
* config -> raw (returns the ceph.conf file as is)
* configdb -> db (returns the ceph config db contents)
The old paths are still available and need to be dropped at some point.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
The API::Ceph::Pools module is deprecated. Use the new API::Ceph::Pool
(singular) module.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
ceph/pools (plural) is deprecated, use the new one.
Since the details / status of a pool has been moved from previously
ceph/pools/{name} to now ceph/pool/{name}/status, we need to pass the
'loadUrl' to the edit window.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
/nodes/{node}/ceph/pools/{pool} returns the pool details right away on a
GET. This makes it bad practice to add additional sub API endpoints.
By deprecating it and replacing it with /nodes/{node}/ceph/pool/{pool}
(singular instead of plural) we can turn that into an index GET
response, making it possible to expand it more in the future.
The GET call returning the pool details is moved into
/nodes/{node}/ceph/pool/{pool}/status
The code in the new Pool.pm is basically a copy of Pools.pm to avoid
a close coupling with the old code as it is possible that it will divert
until we can entirely remove the old code.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
One MDS can only serve a single CephFS at a time and for redundancy
one wants to have standby's on other nodes.
But with multiple CephFS instances a single MDS per node might not be
enough, e.g., with three FS on a three-node cluster a failure of one
node would mean that on CephFS won't work anymore.
While the API and CLI allowed to set up multiple CephFS per node
already, the UI didn't. Address this by adding an `Extra ID` field
that will be suffixed to the base ID, which always contains the node
as that makes sorting and also associating services to their node
easier.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
From a usability view, having a checkbox that is not clickable is pretty
misleading, especially if the visual style is exactly the same as in
other places in the UI where the checkbox is functional.
Signed-off-by: Lukas Wagner <l.wagner@proxmox.com>
The private key's field is now excluded from the upload form's
JSON data if it's left empty.
Prior to this change, the form still used an empty string for the
private key's field, even if no key was provided by the user.
Because the key's field is marked as optional in the upload cert
API endpoint, JSONSchema validation would therefore fail.
Suggested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Max Carrara <m.carrara@proxmox.com>
This change replaces the the certificate upload form's items with
a single inputpanel widget. The components for the key and cert fields
are preserved as-is. Hardcoded values are now explicitly set in
`onGetValues` instead of using hidden widgets.
Suggested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Max Carrara <m.carrara@proxmox.com>
if the user has the tree sorted by name, we have to move the items
on a name change, otherwise they'll stay on the old position
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
This new windows provides more detailes about an OSD such as:
* PID
* Memory usage
* various metadata that could be of interest
* list of phyiscal disks used for the main disk, db and wal with
additional infos about the volumes for each
A new 'Details' button is added to the OSD overview and a double click
on an OSD will also open this new window.
The componend defines the items in the initComponent instead of
following a fully declarative approach. This is because we need to pass
the same store to multiple Proxmox.ObjectGrids.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
Render the OSD listening addresses a bit nicer and one per line.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
To get more details for a single OSD, we add two new endpoints:
* nodes/{node}/ceph/osd/{osdid}/metadata
* nodes/{node}/ceph/osd/{osdid}/lv-info
The {osdid} endpoint itself gets a new GET handler to return the index.
The metadata one provides various metadata regarding the OSD.
Such as
* process id
* memory usage
* info about devices used (bdev/block, db, wal)
* size
* disks used (sdX)
...
* network addresses and ports used
...
Memory usage and PID are retrieved from systemd while the rest can be
retrieved from the metadata provided by Ceph.
The second one (lv-info) returns the following infos for a logical
volume:
* creation time
* lv name
* lv path
* lv size
* lv uuid
* vg name
Possible volumes are:
* block (default value if not provided)
* db
* wal
'ceph-volume' is used to gather the infos, except for the creation time
of the LV which is retrieved via 'lvs'.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
