i have added it to the pci api call, but forgot to add it for usb
otherwise adding a mapped usb device only works on the node where the
gui is connected to
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
by removing the confusing buttons in the toolbar and adding them as
actions in an actioncolumn. There a only relevant actions are visible
and get a more expressive tooltip
with this, we now differentiate between 4 modes of the edit window:
* create a new mapping altogether
- shows all fields
* edit existing mapping on top level
- show only 'global' fields (comment, mdev), so no mappings
* add new host mapping
- shows nodeselector, mapping (and mdev, but disabled)
(informational only)
* edit existing host mapping
- show selected node (displayfield) mdev and mappings, but only
mappings are editable
we have to split the nodeselector into two fields, since the disabling
cbind does not pass through to the editconfig (and thus makes the form
invalid if we try that)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by disallowing nodes to be selected where a mapping already exists
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
they got lost in my last rebase/refactor.
the onLoadCallBack is used to check by the window if there are iommu
groups at all, and the checkIsolated function checks if the selected
ones are in a separate group (in regards to the other devices)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by changing into 'mapping matches host data' which indicates that the
configured values matches the host information
also for the pci and usb map selectors
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
actually drop the deprecated ones from the API routes index and
ensure the replacement /pool is returned (/cfg already was)
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
in theory we'd need to be more cautios but this was added only during
beta, which is when we do not really provided any stability
guarantee, further, it's rather unlikely that one added very
important repos that, when removed, break something (again *during*
beta).
The new APT repo management makes it also easy to see when one does
not gets any PVE updates, and one can add the pvetest repo there
again easily too.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
by
* moving the node to the left column and changing the label
* moving the mdev filter to the right column
* show only the create button for new node mappings (otherwise we'd have
a reset button here that cannot do anything useful)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
when there is more than one function for a device, indent the individual
functions. This sets them visually apart from the 'pass all through as
one' entry
We have to use a html entity here, as extjs trims the normal whitespace.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
and mdev change.
giving an empty array did not have the desired effect of resetting the
selection, but giving no parameter at all does.
this now also clears the selection when the mdev filter/config changed
(was just forgotten)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
To ensure we got versions installed that can be even compatible with
current code and testing.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
qemu/HardwareView:
with the new Hardware privileges, we want to adapt a few places where
we now allow to show the add/edit window with those permissions.
form/{PCI,USB}Selector:
increase the minHeight property of the PCI/USBSelector, so that
the user can see the error message if he has not enough permissions.
data/PermPathStore:
add '/hardware' to the list of acl paths
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
if the migration is an offline migration and when the mapping on the
target node exists, otherwise not
this does not change the behaviour for 'raw' devices in the config
those can still be forced to be migrated, like before
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
uses the new ResourceMapTree to add the CRUD interfaces for the
mappings.
We add both of them into a single panel, since the datacenter menu
already has many entries, and without a proper summary for the group, we
cannot really put them in a category
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this will be the base class for trees for the individual mapping types,
e.g. pci and usb mapping.
there are a few things to configure, but the overall code sharing is
still significant, and should work out fine for future mapping types
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
This contains the window to edit a PCI mapping for a single host.
It is designed to work in 3 modes:
* without an id and a nodename: for new mappings
* with an id but without nodename: for adding new host mappings to an
existing one
* with id and nodename: when editing an existing host mapping
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this is a grid field for selecting multiple pci devices at once, like we
need for the mapped pci ui. There we want to be able to select multiple
devices such that one gets selected automatically
we can select a whole slot here, but that disables selecting the
individual functions of that device.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
reworks the panel to use a controller, so that we can easily
add the selector for mapped pci devices
shows now a selection between 'raw' and 'mapped' devices, where
'raw' ones work like before, and 'mapped' ones take the values
form the hardware map config
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
similar to the pciselector, make it accept a plain nodename,
or no node at all and provide a setNodename function
to keep backwards compatibility, also check pveSelNode for the nodename
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
namely the filtering while preserving the original string,
it's just one line, but having a shorthand for it still makes it a bit
nicer
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
this adds the typical section config crud API calls for
USB and PCI resource mapping to /cluster/mapping/{TYPE}
the only special thing that this series does is the list call
for both has a special 'check-node' parameter that uses the
'proxyto_callback' to reroute the api call to the given node
so that it can check the validity of the mapping for that node
in the future when we e.g. broadcast the lspci output via pmxcfs
we drop the proxyto_callback and directly use the info from
pmxcfs (or we drop the parameter and always check all nodes)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
in pve-http-server the proxyto_callback always has a complete list of
parameters, not only the ones in the url, so adapt the implementation
here to do the same
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
and send the scoped value to the firewall when choosing new values.
This happens for both IPSets and aliases.
Signed-off-by: Leo Nunner <l.nunner@proxmox.com>
