Note that this does not only allow partitions to be used, but for DB
and WAL disks, one more type of disk, that wasn't allowed before.
Namely, GPT-partitioned disks with any partitions detected as used.
The reason is get_disks' behavior:
* Without $include_partitions=1, the disk will have the same usage
as it's first used partition, and thus wasn't allowed. (Except in
the case that usage was LVM, where the check was bypassed, but
luckily OSD creation just failed later because no Ceph volume
group would be detected).
* With $include_partitions=1, the disk will have usage 'partitions'
and thus be allowed.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
namely if the fs is already existing, and if there is currently a
standby mds that can be used for the new fs
previosuly, only one cephfs was possible, so these checks were not
necessary. now with pacific, it is possible to have multiple cephfs'
and we should check for those.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Since commit: 8a3a300b ("ceph services: drop broadcasting legacy
version pmxcfs KV")
The 'ceph-version' kv is not broadcasted anymore, so we should not
query it, instead use get_ceph_versions
Also drop the other legacy keys for the versions
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
There is a udev bug [0] which can ultimately lead to the udev database
for certain devices not being actively updated. The Diskmanage package
relies upon lsblk for certain info, and lsblk queries the udev
database. Ensure the information is updated by manually calling
'udevadm trigger' for the changed devices.
Without the fix, and a bit of bad luck, a cleaned up disk could still
show up as an 'LVM2_member' for example.
[0]: https://github.com/systemd/systemd/issues/18525
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
which is mostly a copy of the wipe_disks helper with the difference
that it also uses wipefs on the device and its partitions.
Remove the wipe_disks helper as no users remain.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Multiple public networks can be defined in the ceph.conf. The networks need to
be routed to each other.
Support handling multiple IPs for a single monitor. By default, one address from
each public network is selected for monitor creation, but, as before, it can be
overwritten with the mon-address parameter, now taking a list of addresses.
On removal, make sure the all addresses are removed from the mon_host entry in
the ceph configuration.
Originally-by: Alwin Antreich <a.antreich@proxmox.com>
[handling of multiple addresses]
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
by also comparing the canonical form to decide when to remove an address. When
getting the IP from the rados information, also drop eventual brackets, so our
existing function can handle it. Add the brackets back within the
remove_addr_from_mon_host function.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
Partially based on pve-storage's CephConfig.pm get_monaddr_list, but the
interface is not the best for the use case here.
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
in preparation for supporting multiple addresses. The config section does not
allow more than one public_addr.
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
mostly relevant to prepare support for IPv4/IPv6 dual stack mode as a special
case of the planned support for mutliple public networks.
As before, only set the false value when we are dealing with the first address,
but also be explicit about the IPv4 case as the defaults might change in the
future.
Then, when an address of a different type comes along later, set the relevant
bind option to true.
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
Signed-off-by: Fabian Ebner <f.ebner@proxmox.com>
nautilus 14.2.20 and octopus 15.2.11 fixed a security issue with
reclaiming the global ID auth (CVE-2021-20288). As fixing this issue
means that older client won't be able to connect anymore, the fix was
done behind a switch, with a HEALTH warning if it was not active
(i.e., disallowed connection from older clients).
New installations have this switch also at the insecure level, for
compat reasons, so lets deactivate it ourself after monitor creation
to avoid the health warning and slightly insecure setup (in default
PVE ceph the whole issue was of rather low impact/risk). But, only do
so when creating the first monitor of a ceph cluster, to avoid
breaking existing setups by accident.
An admin can always switch it back again, e.g., if they're recovering
from some failure and need to setup fresh monitors but have still old
clients.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
this was from the time where we had a loop here to add two storages,
one for KRDB-only and one for KRBD-never. Nowadays we can handle the
mixed case just fine, but the patch dropping that forget to cleanup
the error handling..
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
In Ceph Octopus the device_health_metrics pool is auto-created with 1
PG. Since Ceph has the ability to split/merge PGs, hitting the wrong PG
count is now less of an issue anyhow.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the properties target_size_ratio, target_size_bytes and pg_num_min are
used to fine-tune the pg_autoscaler and are set on a pool. The updated
pool list shows now autoscale settings & status. Including the new
(optimal) target PGs. To make it easier for new users to get/set the
correct amount of PGs.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
We want to check explicitly for type host, so filter for that first
and create a hash map for easier usage afterwards.
Drop the error when there's no tree, as either RADOS error'd on bad
command already, or there really is no tree (but RADOS worked OK), in
which case we simply return that the OSD did not belong to this node.
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Allow destroying only OSDs that belong to the node that has been specified in
the API path.
So if
- OSD 1 belongs to node A and
- OSD 2 belongs to node B
then
- pvesh delete nodes/A/ceph/osd/1 is allowed but
- pvesh delete nodes/A/ceph/osd/2 is not
Destroying an OSD via GUI automatically inserts the correct node
into the API path.
pveceph automatically insert the local node into the API call, too.
Consequently, it can now only destroy local OSDs (fix#2053).
- pveceph osd destroy 1 is allowed on node A but
- pveceph osd destroy 2 is not
Signed-off-by: Dominic Jäger <d.jaeger@proxmox.com>
We get the device list from ceph-volume lvm list, and decode the json
output, which at that point is tainted (perlsec (1)).
Untaint it here before calling, because it is currently the only
call-site using the information in a problematic way (run_command).
(the only other call-site being in pve5to6)
Alternatively we could untaint while reading the information, but then
should only return a small subset of the ceph-volume output.
The issue is most likely due to
cb9db10c1a9855cf40ff13e81f9dd97d6a9b2698 in pve-common ('run_command:
improve performance for logging and long lines'),
Tested on a virtual testsetup by creating OSDs with second DB disk,
and destroying it via GUI (did not manage to get the error without the
DB disk)
Reported via our community forum:
https://forum.proxmox.com/threads/insecure-dependency-in-exec-during-osd-destroy.79574/
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
In some situations Ceph's auto-detection doesn't recognize the device
class correctly. The option allows to set it directly on osd create,
instead of altering it afterwards. This way the cluster doesn't need to
shift data back and forth unnecessarily.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
Luminous, Nautilus and Octopus. In Octopus the mon_status was dropped.
Also the ceph status was cleaned up and doesn't provide the mgrmap and
monmap.
The rados queries used in the ceph status API endpoints (cluster / node)
were factored out and merged to one place.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
The public_addr option for creating a new MON is only valid for manual
startup (since Ceph Jewel) and is just ignored by ceph-mon during setup.
As the MON is started after the creation through systemd without an IP
specified. It is trying to auto-select an IP.
Before this patch the public_addr was only explicitly written to the
ceph.conf if no public_network was set. The mon_address is only needed
in the config on the first start of the MON.
The ceph-mon itself tries to select an IP on the following conditions.
- no public_network or public_addr is in the ceph.conf
* startup fails
- public_network is in the ceph.conf
* with a single network, take the first available IP
* on multiple networks, walk through the list orderly and start on
the first network where an IP is found
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
instead of having multiple regexes in various places for the name,
define a 'SERVICE_REGEX' in PVE::Ceph::Services, and use that
everywhere in the api where we need it
additionally limit new sevices to 200 characters, since
systemd units have a limit of 256 characters[0] (including suffix), and
200 seems to be enough.
users can now create ceph services on machines with hostnames
longer than 32 characters
0: https://www.freedesktop.org/software/systemd/man/systemd.unit.html
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
the network and the cluster network are optional in the ceph config
and with 'pveceph init', so only check if we have an ip address
from those networks if it is actually configured
otherwise, the createosd call dies with an 'ip' error message
even if it would work
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
It's possible to have a situation where the cluster network (used for
inter-OSD traffic) is not configured on a node. The OSD can still be
created but can't communicate.
This check will abort the creation if there is no IP within the subnet
of the cluster network present on the node. If there is no dedicated
cluster network the public network is used as a failsafe even though
this situation should not occur.
Signed-off-by: Aaron Lauterer <a.lauterer@proxmox.com>
Ceph MGR fails to start when installed on a node without existing
symlink to /etc/pve/ceph.conf.
Signed-off-by: Alwin Antreich <a.antreich@proxmox.com>
It was intended that for partitioned disks, we create one and use it.
Instead the code died always when the disk was used and not of type 'LVM'
We now check correctly the 2 cases:
* used for partitions and has gpt
* used and lvm
The remaining api call handles those two cases correctly
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
