proxmox-mirrors/pmg-docs
1
0
Fork 0
mirror of https://git.proxmox.com/git/pmg-docs synced 2025-10-04 16:39:57 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

installation: convert installer screenshots to thumbnails

Browse Source 
Again, like the PVE documantation. Improves the reading flow quite a bit
too.

Signed-off-by: Christoph Heiss <c.heiss@proxmox.com>
This commit is contained in:
Christoph Heiss 2024-02-23 12:48:47 +01:00 committed by Thomas Lamprecht
parent 84f2aef40a
commit ca47e9efe1
1 changed files with 9 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
pmg-installation.adoc
View File

@ -48,11 +48,11 @@ TIP: Make sure that booting from the installation medium (for example, USB) is
enabled in your server's firmware settings. Secure boot needs to be disabled
when booting an installer prior to {pmg} version 8.1.
[thumbnail="../installer/pmg-grub-menu.png"]
After choosing the correct entry (for example, Boot from USB) the {pmg} menu
will be displayed, and one of the following options can be selected:
image::images/installer/pmg-grub-menu.png[]
Install {pmg} (Graphical)::
Start normal installation.
@ -113,7 +113,8 @@ of errors. Secure Boot must be turned off in the UEFI firmware setup utility to
run this option.
You normally select *Install {pmg} (Graphical)* to start the installation.
image::images/installer/pmg-select-target-disk.png[]
[thumbnail="../installer/pmg-select-target-disk.png"]
The first step is to read our EULA (End User License Agreement). Following
this, you can select the target hard disk(s) for the installation.
@ -135,7 +136,7 @@ lets you choose the ZFS RAID level and select which disks will be used.
WARNING: ZFS on top of any hardware RAID is not supported and can result in data
loss.
image::images/installer/pmg-select-location.png[]
[thumbnail="../installer/pmg-select-location.png", float="left"]
The next page asks for basic configuration options like your
location, timezone, and keyboard layout. The location is used to
@ -144,7 +145,7 @@ The installer is usually able to auto-detect these settings, so you only need to
change them in rare situations when auto-detection fails, or when you want to
use a keyboard layout not commonly used in your country.
image::images/installer/pmg-set-password.png[]
[thumbnail="../installer/pmg-set-password.png"]
You then need to specify an email address and the superuser (root)
password. The password must have at least 5 characters, but we highly
@ -168,13 +169,13 @@ example:
All those notification mails will be sent to the specified email address.
image::images/installer/pmg-setup-network.png[]
[thumbnail="../installer/pmg-setup-network.png"]
The next step is the network configuration. Please note that you can use either
IPv4 or IPv6 here, but not both. If you want to configure a dual stack node,
you can easily do that after the installation.
image::images/installer/pmg-summary.png[]
[thumbnail="../installer/pmg-installation.png", float="left"]
When you press `Next`, you will see an overview of your entered configuration.
Please re-check every setting, you can still use the `Previous` button to go
@ -183,7 +184,7 @@ back and edit any settings.
After clicking `Install`, the installer will begin to format and copy packages
to the target disk(s).
image::images/installer/pmg-installation.png[]
[thumbnail="../installer/pmg-summary.png"]
Copying the packages usually takes several minutes. When this is
finished, you can reboot the server.