proxmox-mirrors/pmg-docs
1
0
Fork 0
mirror of https://git.proxmox.com/git/pmg-docs synced 2025-10-04 21:38:31 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

installation: convert installer screenshots to thumbnails

Browse Source 
Again, like the PVE documantation. Improves the reading flow quite a bit
too.

Signed-off-by: Christoph Heiss <c.heiss@proxmox.com>
This commit is contained in:
Christoph Heiss 2024-02-23 12:48:47 +01:00 committed by Thomas Lamprecht
parent 84f2aef40a
commit ca47e9efe1
1 changed files with 9 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
pmg-installation.adoc
View File

@ -48,11 +48,11 @@ TIP: Make sure that booting from the installation medium (for example, USB) is
enabled in your server's firmware settings. Secure boot needs to be disabled enabled in your server's firmware settings. Secure boot needs to be disabled
when booting an installer prior to {pmg} version 8.1. when booting an installer prior to {pmg} version 8.1.
[thumbnail="../installer/pmg-grub-menu.png"]
After choosing the correct entry (for example, Boot from USB) the {pmg} menu After choosing the correct entry (for example, Boot from USB) the {pmg} menu
will be displayed, and one of the following options can be selected: will be displayed, and one of the following options can be selected:
image::images/installer/pmg-grub-menu.png[]
Install {pmg} (Graphical):: Install {pmg} (Graphical)::
Start normal installation. Start normal installation.
@ -113,7 +113,8 @@ of errors. Secure Boot must be turned off in the UEFI firmware setup utility to
run this option. run this option.
You normally select *Install {pmg} (Graphical)* to start the installation. You normally select *Install {pmg} (Graphical)* to start the installation.
image::images/installer/pmg-select-target-disk.png[]
[thumbnail="../installer/pmg-select-target-disk.png"]
The first step is to read our EULA (End User License Agreement). Following The first step is to read our EULA (End User License Agreement). Following
this, you can select the target hard disk(s) for the installation. this, you can select the target hard disk(s) for the installation.
@ -135,7 +136,7 @@ lets you choose the ZFS RAID level and select which disks will be used.
WARNING: ZFS on top of any hardware RAID is not supported and can result in data WARNING: ZFS on top of any hardware RAID is not supported and can result in data
loss. loss.
image::images/installer/pmg-select-location.png[] [thumbnail="../installer/pmg-select-location.png", float="left"]
The next page asks for basic configuration options like your The next page asks for basic configuration options like your
location, timezone, and keyboard layout. The location is used to location, timezone, and keyboard layout. The location is used to
@ -144,7 +145,7 @@ The installer is usually able to auto-detect these settings, so you only need to
change them in rare situations when auto-detection fails, or when you want to change them in rare situations when auto-detection fails, or when you want to
use a keyboard layout not commonly used in your country. use a keyboard layout not commonly used in your country.
image::images/installer/pmg-set-password.png[] [thumbnail="../installer/pmg-set-password.png"]
You then need to specify an email address and the superuser (root) You then need to specify an email address and the superuser (root)
password. The password must have at least 5 characters, but we highly password. The password must have at least 5 characters, but we highly
@ -168,13 +169,13 @@ example:
All those notification mails will be sent to the specified email address. All those notification mails will be sent to the specified email address.
image::images/installer/pmg-setup-network.png[] [thumbnail="../installer/pmg-setup-network.png"]
The next step is the network configuration. Please note that you can use either The next step is the network configuration. Please note that you can use either
IPv4 or IPv6 here, but not both. If you want to configure a dual stack node, IPv4 or IPv6 here, but not both. If you want to configure a dual stack node,
you can easily do that after the installation. you can easily do that after the installation.
image::images/installer/pmg-summary.png[] [thumbnail="../installer/pmg-installation.png", float="left"]
When you press `Next`, you will see an overview of your entered configuration. When you press `Next`, you will see an overview of your entered configuration.
Please re-check every setting, you can still use the `Previous` button to go Please re-check every setting, you can still use the `Previous` button to go
@ -183,7 +184,7 @@ back and edit any settings.
After clicking `Install`, the installer will begin to format and copy packages After clicking `Install`, the installer will begin to format and copy packages
to the target disk(s). to the target disk(s).
image::images/installer/pmg-installation.png[] [thumbnail="../installer/pmg-summary.png"]
Copying the packages usually takes several minutes. When this is Copying the packages usually takes several minutes. When this is
finished, you can reboot the server. finished, you can reboot the server.