This helps to avoids confusion with the similarly-named
txg_wait_synced().
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
It seems `fio` in `ddt_dedup_vdev_limit` overwhelms the system
with the amount of dirty data caused by DDT updates within one
TXG due to tiny 1KB records used, while I see no reason for this
test to extend the TXGs beyond default.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: @ImAwsumm
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Force receive (zfs receive -F) can rollback or destroy snapshots and
file systems that do not exist on the sending side (see zfs-receive man
page). This means an user having the receive permission can effectively
delete data on receiving side, even if such user does not have explicit
rollback or destroy permissions.
This patch adds the receive:append permission, which only permits
limited, non-forced receive. Behavior for users with full receive
permission is not changed in any way.
Fixes#16943
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#17015
This PR condenses the FDT dedup log syncing into a single sync
pass. This reduces the overhead of modifying indirect blocks for the
dedup table multiple times per txg. In addition, changes were made to
the formula for how much to sync per txg. We now also consider the
backlog we have to clear, to prevent it from growing too large, or
remaining large on an idle system.
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Authored-by: Don Brady <don.brady@klarasystems.com>
Authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17038
* FreeBSD 12 is EoL. Drop it.
* Use the latest FreeBSD 13 and 14 versions.
* Add FreeBSD 15.0-CURRENT.
* Use the current python version.
Sponsored by: ConnectWise
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#17139
Implementation of DDT pruning introduced verification of DVAs in
a block pointer during ddt_lookup() to not by mistake free previous
pruned incarnation of the entry. But when writing a new block in
zio_ddt_write() we might have the DVAs only from override pointer,
which may never have "D" flag to be confused with pruned DDT entry,
and we'll abandon those DVAs if we find a matching entry in DDT.
This fixes deduplication for blocks written via dmu_sync() for
purposes of indirect ZIL write records, that I have tested. And
I suspect it might actually allow deduplication for Direct I/O,
even though in an odd way -- first write block directly and then
delete it later during TXG commit if found duplicate, which part
I haven't tested.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17120
Since embedded blocks introduction 11 years ago, their writing was
blocked if dedup is enabled. After searching through the modern
code I see no reason for this restriction to exist. Same time
embedded blocks are dramatically cheaper. Even regular write of
so small blocks would likely be cheaper than deduplication, even
if the last is successful, not mentioning otherwise.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17113
This statx(2) mask returns the alignment restrictions for O_DIRECT
access on the given file.
We're expected to return both memory and IO alignment. For memory, it's
always PAGE_SIZE. For IO, we return the current block size for the file,
which is the required alignment for an arbitrary block, and for the
first block we'll fall back to the ARC when necessary, so it should
always work.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16972
Now instead of crashing when attempting to read the corrupt block
pointer, ZFS will return ECKSUM, in a stack that looks like this:
```
none:set-error
zfs.ko`arc_read+0x1d82
zfs.ko`dbuf_read+0xa8c
zfs.ko`dmu_buf_hold_array_by_dnode+0x292
zfs.ko`dmu_read_uio_dnode+0x47
zfs.ko`zfs_read+0x2d5
zfs.ko`zfs_freebsd_read+0x7b
kernel`VOP_READ_APV+0xd0
kernel`vn_read+0x20e
kernel`vn_io_fault_doio+0x45
kernel`vn_io_fault1+0x15e
kernel`vn_io_fault+0x150
kernel`dofileread+0x80
kernel`sys_read+0xb7
kernel`amd64_syscall+0x424
kernel`0xffffffff810633cb
```
This patch should hopefully also prevent such corrupt block pointers
from being written to disk in the first place.
And in zdb, don't crash when printing a block pointer with no valid
DVAs. If a block pointer isn't embedded yet doesn't have any valid
DVAs, that's a data corruption bug. zdb should be able to handle the
situation gracefully.
Finally, remove an extra check for gang blocks in SNPRINTF_BLKPTR. This
check, which compares the asizes of two different DVAs within the same
BP, was added by illumos-gate commit b24ab67[^1], and I can't understand
why. It doesn't appear to do anything useful, so remove it.
[^1]: b24ab67627
Fixes #17077
Sponsored by: ConnectWise
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#17078
since 4.10, bio->bi_opf needs to be checked to determine all kinds of
flush requests. this was the case prior to the commit referenced below,
but the order of ifdefs was not the usual one (newest up top), which
might have caused this to slip through.
this fixes a regression when using zvols as Qemu block devices, but
might have broken other use cases as well. the symptoms are that all
sync writes from within a VM configured to use such a virtual block
devices are ignored and treated as async writes by the host ZFS layer.
this can be verified using fio in sync mode inside the VM, for example
with
fio \
--filename=/dev/sda --ioengine=libaio --loops=1 --size=10G \
--time_based --runtime=60 --group_reporting --stonewall --name=cc1 \
--description="CC1" --rw=write --bs=4k --direct=1 --iodepth=1 \
--numjobs=1 --sync=1
which shows an IOPS number way above what the physical device underneath
supports, with "zpool iostat -r 1" on the hypervisor side showing no
sync IO occuring during the benchmark.
with the regression fixed, both fio inside the VM and the IO stats on
the host show the expected numbers.
Fixes: 846b598519
"config: remove HAVE_REQ_OP_* and HAVE_REQ_*"
Signed-off-by: Fabian-Gruenbichler <f.gruenbichler@proxmox.com>
Co-authored-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
We had a case where we were autoreplacing a disk and
zpool_prepare_disk failed for some reason, and ZED
didn't log the return code. This commit logs the code.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17124
PR #14161 made spa_do_crypt_objset_mac_abd() to ignore MAC errors
if local MAC can not be calculated at the time. But it does not
mean we should also ignore portable MAC errors there.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17122
Add a new 'zfs-qemu-packages' GH workflow for manually building RPMs
and test installing ZFS RPMs from a yum repo. The workflow has a
dropdown menu in the Github runners tab with two options:
Build RPMs - Build release RPMs and tarballs and put them into an
artifact ZIP file. The directory structure used in
the ZIP file mirrors the ZFS yum repo.
Test repo - Test install the ZFS RPMs from the ZFS repo. On
Almalinux, this will do a DKMS and KMOD test install
from both the regular and testing repos. On Fedora,
it will do a DKMS install from the regular repo. All
test install results will be displayed in the Github
runner Summary page. Note that the workflow provides an
optional text box where you can specify the full URL to
an alternate repo. If left blank, it will install from
the default repo from the zfs-release RPM.
Most developers will never need to use this workflow. It is intended
to be used by the ZFS admins for building and testing releases.
This commit also modularizes many of the runner scripts so they can
be used by both the zfs-qemu and zfs-qemu-packages workflows.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17005
The new Fast Dedup feature has a lot of moving parts, and only some of
them have tests. We have some tests for prefetch and quota, and a
generic ZAP shrinking test, but we don't have anything for the pruning
command or specific to DDT zap shrinking. Here we add a couple small new
tests for zpool ddtprune and DDT-specific ZAP shrinking.
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17049
Most of these are trying to use TMPDIR to put their work files somewhere
sensible. Now that we've set up correctly, they can all just use mktemp
to do the job.
In a couple of places cleaning up temp files wasn't being done
correctly, which has been fixed.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
In all cases, rely on mktemp itself to make the best decision about
where to place the file or directory. In all cases, that decision will
be $TMPDIR, which we have set globally.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Many tests use mktemp to create temporary files and dirs, which will
usually put them in /tmp unless instructed otherwise. This had led to
many tests trying to give mktemp a useful temp path in ad-hoc ways, and
others just using it directly without knowing they're potentially
leaving stuff lying around.
So we set TMPDIR to FILEDIR, which makes the simplest uses of mktemp put
things in the wanted work dir.
Included here is a hack to get TMPDIR into the test. If a test has to be
run as a different user (most of them), it is run through sudo. ld.so
from glibc will not pass TMPDIR to a setuid program, so instead we
re-set TMPDIR after sudo before running the target command.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
The default outputdir had a timestamp appended in TestRun.__init__, and
then the timestamp was unconditionally applied again after the runfile
had been loaded, assuming that an outputdir would be set in the runfile
too. If the runfile didn't have an outputdir, then the outputdir would
get a second timestamp appended.
Further, if test groups or individual tests themselves specificed an
outputdir, those would be set on their config, but would not get a
timestamp appended. It's not entirely clear if that's wrong or not, but
it is certainly not consistent with the rest.
To clean all this up, change things to append a timestamp to a received
outputdir (from arg or runfile) before setting it in any TestRun,
TestGroup or Test object.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
The config file value overrides any set by the operator, making it quite
difficult to put the test output elsewhere. The default is
/var/tmp/test_results (via BASEDIR in test-runner) so this shouldn't
change anything for the default case.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
The default file vdevs, constrained binpath and temporary runfiles were
all explicitly places in /var/tmp. Instead, put them under FILEDIR,
which is set from -d and defaults to /var/tmp. TEST_BASE_DIR is also
initialised from FILEDIR, which means all data for the run will now end
up under the operator-specified data dir.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
The operator can override TEST_BASE_DIR by setting its source var
FILEDIR through zfs-tests.sh -d. There were a handful of cases where
this was not honoured.
By default FILEDIR (and so TEST_BASE_DIR) is /var/tmp, so there should
be no functional change if the operator does nothing.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Update the META file to reflect compatibility with the 6.13 kernel.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
IVs != 96 bits get hashed with GHASH to bring them to 96 bits. Any call
to GHASH will mix the ghash state in gcm_ghash. This is expected to be
zero at first use in an encrypt or decrypt operation, so it needs to be
zeroed after using GHASH in setup.
gcm_init() does this, but gcm_avx_init() zeroed it before setup, not
after, resulting in incorrect encrypt/decrypt results when using AVX GCM
with an IV != 96 bits.
OpenZFS _always_ uses a 96 bit IV (ZIO_DATA_IV_LEN) so this will never
have been hit in any real-world use, which is extremely fortunate, as we
would have incorrectly-encrypted data on-disk. Still, as long as we have
this code here we should make sure it's correct.
Thanks-to: Joel Low <joel@joelsplace.sg>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
This commit adds tests that ensure that the ICP crypto_encrypt() and
crypto_decrypt() produce the correct results for all implementations
available on this platform.
The actual ZTS scripts are simple drivers for the crypto_test program in
it's "correctness" mode. This mode takes a file full of test vectors
(inputs and expected outputs), runs them, and checks that the results
are expected. It will run the tests for each implementation of the
algorithm provided by the ICP.
The test vectors are taken from Project Wycheproof, which provides a
huge number of tests, including exercising many edge cases and common
implementation mistakes. These tests are provided are JSON files, so a
program is included here to convert them into a simpler line-based
format for crypto_test to consume.
crypto_test also has a "performance" mode, which will run simple
benchmarks against all implementations provded by the ICP and output
them for comparison. This is not used by ZTS, but is available to assist
with development of new implementations of the underlying primitives.
Thanks-to: Joel Low <joel@joelsplace.sg>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
`zpool create` won't let you use relative paths to disks. This is
annoying when you want to do:
zpool create tank ./diskfile
But have to do..
zpool create tank `pwd`/diskfile
This fixes it.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17042
In l2arc_evict(), the config lock may be acquired in reverse order
(e.g., first the config lock (writer), then a hash lock) unlike in
arc_read() during scenarios like L2ARC device removal. To avoid
deadlocks, if the attempt to acquire the config lock (reader) fails
in arc_read(), release the hash lock, wait for the config lock, and
retry from the beginning.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17071
Don't try to get mg of hole vdev in removal
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17080
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: SHENGYI HONG <aokblast@FreeBSD.org>
Closes#17088
Before this change zfs_metaslab_switch_threshold tunable switched
metaslabs each time ones index reduced by two (which means biggest
contiguous chunk reduced to 1/4). It is a good idea to balance
metaslabs fragmentation. But for empty metaslabs (having power-
of-2 sizes) this means switching when they get just below the half
of their capacity. Inspection with zdb after filling new pool to
half capacity shown most of its metaslabs filled to half capacity.
I consider this sub-optimal for pool fragmentation in a long run.
This change blocks the metaslabs switching if most of the metaslab
free space (15/16) is represented by a single contiguous range.
Such metaslab should not be considered fragmented until it actually
fail some big allocation. More contiguous filling should improve
data locality and increase time before previously filled and
partially freed metaslab is touched again, giving it more time to
free more contiguous chunks for lower fragmentation. It should
also slightly reduce spacemap traffic.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17081
If the timing is unfortunate, the pool can suspend just as we're failing
because it didn't suspend. If we don't resume the pool, we hang trying
to destroy it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17054
It's included so it's effectively already part of it, but it's not
always installed as a userspace header, making zfs.h effectively
useless. Might as well just combine it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Close#17066
zfs_file_fsync() and zfs_file_deallocate() are both blocking ops, so the
zio_taskq thread is active and blocked both while waiting for the IO
call and then while calling zio_execute() for the next stage. This is a
particular issue for FLUSH, as the z_flush_iss queue typically only has
one thread; multiple flushes arriving at once can cause long delays if
the underlying fsync() response is particularly slow.
To fix this, we dispatch both FLUSH and TRIM to the z_vdev_file taskq,
just as we do for reads and writes. Further, we return all results
through zio_interrupt(), so neither the issue nor the file taskqs are
blocked.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17064
Need to use arc_free_data_abd to free abd type buffer.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#17079
Kernel & userspace specifics are in zfs_file_os.c, so there's no
particular reason these have to be separate.
The one platform-specific part is in the Linux kernel part, to offload
flushes to a taskq if we're already inside a filesystem transaction.
This would be normally be an unsatisfying wart, but I'm intending to
remove this shortly, so I'm content to leave it gated for the moment.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Since we are calculating a free space fragmentation, we should
weight metaslabs by the amount of their free space, not a full
size. Fragmentation of full metaslabs may not matter in presence
empty ones. The old algorithm did not differentiate metaslabs
having only one free 4KB block from metaslabs having 50% of space
free in 4KB blocks, reporting higher fragmentation.
While there, move metaslab_group_alloc_update() call after setting
mg_fragmentation, otherwise the effect may be delayed by one TXG.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
