Update the META file to reflect compatibility with the 6.13 kernel.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
`zpool create` won't let you use relative paths to disks. This is
annoying when you want to do:
zpool create tank ./diskfile
But have to do..
zpool create tank `pwd`/diskfile
This fixes it.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17042
In l2arc_evict(), the config lock may be acquired in reverse order
(e.g., first the config lock (writer), then a hash lock) unlike in
arc_read() during scenarios like L2ARC device removal. To avoid
deadlocks, if the attempt to acquire the config lock (reader) fails
in arc_read(), release the hash lock, wait for the config lock, and
retry from the beginning.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17071
Don't try to get mg of hole vdev in removal
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17080
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: SHENGYI HONG <aokblast@FreeBSD.org>
Closes#17088
Before this change zfs_metaslab_switch_threshold tunable switched
metaslabs each time ones index reduced by two (which means biggest
contiguous chunk reduced to 1/4). It is a good idea to balance
metaslabs fragmentation. But for empty metaslabs (having power-
of-2 sizes) this means switching when they get just below the half
of their capacity. Inspection with zdb after filling new pool to
half capacity shown most of its metaslabs filled to half capacity.
I consider this sub-optimal for pool fragmentation in a long run.
This change blocks the metaslabs switching if most of the metaslab
free space (15/16) is represented by a single contiguous range.
Such metaslab should not be considered fragmented until it actually
fail some big allocation. More contiguous filling should improve
data locality and increase time before previously filled and
partially freed metaslab is touched again, giving it more time to
free more contiguous chunks for lower fragmentation. It should
also slightly reduce spacemap traffic.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17081
If the timing is unfortunate, the pool can suspend just as we're failing
because it didn't suspend. If we don't resume the pool, we hang trying
to destroy it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17054
It's included so it's effectively already part of it, but it's not
always installed as a userspace header, making zfs.h effectively
useless. Might as well just combine it.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Close#17066
zfs_file_fsync() and zfs_file_deallocate() are both blocking ops, so the
zio_taskq thread is active and blocked both while waiting for the IO
call and then while calling zio_execute() for the next stage. This is a
particular issue for FLUSH, as the z_flush_iss queue typically only has
one thread; multiple flushes arriving at once can cause long delays if
the underlying fsync() response is particularly slow.
To fix this, we dispatch both FLUSH and TRIM to the z_vdev_file taskq,
just as we do for reads and writes. Further, we return all results
through zio_interrupt(), so neither the issue nor the file taskqs are
blocked.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17064
Need to use arc_free_data_abd to free abd type buffer.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#17079
Kernel & userspace specifics are in zfs_file_os.c, so there's no
particular reason these have to be separate.
The one platform-specific part is in the Linux kernel part, to offload
flushes to a taskq if we're already inside a filesystem transaction.
This would be normally be an unsatisfying wart, but I'm intending to
remove this shortly, so I'm content to leave it gated for the moment.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Since we are calculating a free space fragmentation, we should
weight metaslabs by the amount of their free space, not a full
size. Fragmentation of full metaslabs may not matter in presence
empty ones. The old algorithm did not differentiate metaslabs
having only one free 4KB block from metaslabs having 50% of space
free in 4KB blocks, reporting higher fragmentation.
While there, move metaslab_group_alloc_update() call after setting
mg_fragmentation, otherwise the effect may be delayed by one TXG.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Linux 6.12 has conflicting range_tree_{find,destroy,clear} symbols.
Signed-off-by: Ivan Volosyuk <Ivan.Volosyuk@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
skc->skc_name also needs to be freed in an error path.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Vandana Rungta <vrungta@amazon.com>
Closes#17041
For zfs_rename, after the dataset name is successfully updated,
the dataset handle that was passed to zfs_rename, still contains
the old name, due to which, the dataset handle becomes invalid.
The following operations performed using this handle result in
error since the dataset with old name cannot be found anymore.
changelist_rename does update the names in dataset handles,
but those are temporary handles that were created during
changelist_gather. The original handle that was used to call
zfs_rename is not updated.
We should update the name in original ZFS handle after the IOCTL
for rename returns success for the operation.
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The purpose of no-op is to simulate a failure between a device cache and
its permanent store. We still want it to go through the queue and
respond in the same way to everything else.
So, inject "success" as the very last thing, and then move on to
VDEV_IO_DONE to be dequeued and so any followup work can occur.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17029
"DESTDIR=/path/to/target/root/ make install" may fail when installing to
a root that contains an existing lib/modules structure. When run as root
we may even affect the wrong kernel (the build system's one, or, if
running a different version, some other directory in /lib/modules, but
not the desired one installed in DESTDIR).
Add a missing reference to the INSTALL_MOD_PATH root when calling
"depmod" during "make install"
Also add a switch "DONT_DELETE_MODULES_FILES=1" that skips the removal
of files named "modules.*" prior to running depmod.
Signed-off-by: Christian Kohlschütter <christian@kohlschutter.com>
Closes#16994
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
recv_fix_encryption_hierarchy() in its present state goes through all
stream filesystems, and for each one traverses the snapshots in order to
find one that exists locally. This happens by calling guid_to_name() for
each snapshot, which iterates through all children of the filesystem.
This results in CPU utilization of 100% for several minutes (for ~1000
filesystems on a Ryzen 4350G) for 1 thread at the end of a raw receive
(-w, regardless whether encrypted or not, dryrun or not).
Fix this by following a different logic: using the top_fs name, call
gather_nvlist() to gather the nvlists for all local filesystems. For
each one filesystem, go through the snapshots to find the corresponding
stream's filesystem (since we know the snapshots guid and can search
with it in stream_avl for the stream's fs). Then go on to fix the
encryption roots and locations as in its present state.
Avoiding guid_to_name() iteratively makes
recv_fix_encryption_hierarchy() significantly faster (from several
minutes to seconds for ~1000 filesystems on a Ryzen 4350G).
Another problem is the following: in case we have promoted a clone of
the filesystem outside the top filesystem specified in zfs send, zfs
receive does not fail but returns an error:
recv_incremental_replication() fails to find its origin and errors out
with needagain=1. This results in recv_fix_hierarchy() not being called
which may render some children of the top fs not mountable since their
encryption root was not updated. To circumvent this make
recv_incremental_replication() silently ignore this error.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#16929
Gang blocks have a significant impact on the long and short term
performance of a zpool, but there is not a lot of observability into
whether they're being used. This change adds gang-specific kstats to
ZFS, to better allow users to see whether ganging is happening.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17003
When you are using large recordsizes in conjunction with raidz, with
incompressible data, you can pretty reliably be making 21 MB
allocations. Unfortunately, the fragmentation metric in ZFS considers
any metaslabs with 16 MB free chunks completely unfragmented, so you can
have a metaslab report 0% fragmented and be unable to satisfy an
allocation. When using the segment-based metaslab weight, this is
inconvenient; when using the space-based one, it can seriously degrade
performance.
We expand the fragmentation table to extend up to 512MB, and redefine
the table size based on the actual table, rather than having a static
define. We also tweak the one variable that depends on fragmentation
directly.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#16986
Sponsored-by: Wasabi Technology, Inc.
Sponsored-by: Klara, Inc.
Signed-off-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The current documentation of `zfs destroy` in application to snapshots
is particularly difficult to understand. The following changes are made:
- Remove circular reference to `zfs destroy` in the documentation of
that command.
- Remove use of "for example", which implies there are more,
undocumented reasons that ZFS may fail to destroy a snapshot
immediately.
- Mention properties `defer_destroy` and `userrefs`.
- Add `zfsprops(8)` to "SEE ALSO" list.
- Clarify meaning of `-d` option.
Requires-builders: none
Signed-off-by: mnrx <83848843+mnrx@users.noreply.github.com>
Co-authored-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
According to the upstream change, all callers set it, and all block
devices either honoured it or ignored it, so removing it entirely allows
a bunch of handling for the "unset" case to be removed, and it becomes
effectively implied.
We follow suit, and keep setting it for older kernels.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This is a convenience for filesystems that need the inode of their
parent or their own name, as its often complicated to get that
information. We don't need those things, so this is just detecting which
prototype is expected and adjusting our callback to match.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
As zios are reexecuted after resume from suspension, their ready and
wait states need to be propagated to wait counts on all their parents.
It's possible for those parents to have active children passing through
READY or DONE, which then end up in zio_notify_parent(), take their
parent's lock, and decrement the wait count. Without also taking a lock
here, it's possible for an increment race to occur, which leads to
either there being no references left (tripping the assert in
zio_notify_parent()), or a parent waiting forever for a nonexistent
child to complete.
To protect against this, we simply take the appropriate zio locks in
zio_reexecute() before updating the wait counts.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17016
This change will prevent prefetch to perform unnecessary ARC buffer
fill when reading from disk.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Jaydeep Kshirsagar <jkshirsagar@maxlinear.com>
Co-authored-by: Alexander Motin <mav@FreeBSD.org>
Closes#17013
Introduced functionality to recursively mount datasets with a new
config option `mount_recursively`. Adjusted existing functions to
handle the recursive behavior and added tests to validate the feature.
This enhances support for managing hierarchical ZFS datasets within
a PAM context.
Signed-off-by: Jerzy Kołosowski <jerzy@kolosowscy.pl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Originally #16856 updated Linux Direct I/O requests to use the new
pin_user_pages API. However, it was an oversight that this PR only
handled iov_iter's of type ITER_IOVEC and ITER_UBUF. Other iov_iter
types may try and use the pin_user_pages API if it is available. This
can lead to panics as the iov_iter is not being iterated over correctly
in zfs_uio_pin_user_pages().
Unfortunately, generic iov_iter API's that call pin_user_page_fast() are
protected as GPL only. Rather than update zfs_uio_pin_user_pages() to
account for all iov_iter types, we can simply just call
zfs_uio_get_dio_page_iov_iter() if the iov_iter type is not ITER_IOVEC
or ITER_UBUF. zfs_uio_get_dio_page_iov_iter() calls the
iov_iter_get_pages() calls that can handle any iov_iter type.
In the future it might be worth using the exposed iov_iter iterator
functions that are included in the header iov_iter.h since v6.7. These
functions allow for any iov_iter type to be iterated over and advanced
while applying a step function during iteration. This could possibly be
leveraged in zfs_uio_pin_user_pages().
A new ZFS test case was added to test that a ITER_BVEC is handled
correctly using this new code path. This test case was provided though
issue #16956.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16956Closes#17006
The flag VFCF_FILEREV was recently defined in FreeBSD
so that a file system could indicate that it increments
va_filerev by one for each change.
Since ZFS does do this, set the flag if defined for the
kernel being built. This allows the NFSv4.2 server to
reply with the correct change_attr_type attribute value.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closed#16976
Injecting a device probe failure is not possible by matching IO types,
because probe IO goes to the label regions, which is explicitly excluded
from injection. Even if it were possible, it would be awkward to do,
because a probe is sequence of reads and writes.
This commit adds a new IO "type" to match for injection, which looks for
the ZIO_FLAG_PROBE flag instead. Any probe IO will be match the
injection record and recieve the wanted error.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16947
I'm about to add a new "type", and I need somewhere to put it!
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16947
It's now a simple wrapper, so lets just call kstat direct.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Removes other custom helpers and direct accesses to /proc.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The old kstat helper function was barely used, I suspect in part because
it was very limited in the kinds of kstats it could gather.
This adds new functions to replace it, for each kind of thing that can
have stats: global, pool and dataset. There's options in there to get a
single stat value, or all values within a group.
Most importantly, the interface is the same for both platforms.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tim Smith <tsmith84@gmail.com>
Closes#16965
The warning at the end of the second example in the description section
was actually inside the options table. Move the El macro to match what
is done in the first section for improved readability.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Ziaee <ziaee@FreeBSD.org>
Closes#16962
2.3.0 is out now, so make 2.2.x the LTS release.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16945Closes#16948
Removed three unnecessary spaces in the definition of the
sa_attr_reg_t structure to improve code style consistency
and adhere to OpenZFS coding standards.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Peng Liu <littlenewton6@gmail.com>
Closes#16955
To do a cross-build using only kbuild rather than a full source tree,
ARCH= needs to be passed for the kbuild Makefile to find the
archspecific Makefile.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16944
When building tests with zinject, it can be quite difficult to work out
if you're producing the right kind of IO to match the rules you've set
up.
So, here we extend injection records to count the number of times a
handler matched the operation, and how often an error was actually
injected (ie after frequency and other exclusions are applied).
Then, display those counts in the `zinject` output.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16938
We should not hardcode 512-byte read size when checking for loader
in the boot area before RAIDZ expansion. Disk might be unable to
handle that I/O as is, and the code zio_vdev_io_start() handling
the padding asserts doing it only for top-level vdev.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16942
Added in b1e46f869, but empty, so no point keeping it around.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16931
In order to correctly cross-compile, one has to pass ARCH and
CROSS_COMPILE make flags to kernel module build calls. Facilitate this
in the same way as for custom CC flag by recognizing KERNEL_-prefixed
configure environment variables of same name.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Closes#16924
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Robert Evans <evansr@google.com>
Closes#16926
#15793 wanted to make zfs_strerror threadsafe, unfortunately, it
turned out that strerror_l() usage was wrong, and also, some libc
implementations dont have strerror_l().
zfs_strerror() now simply calls original strerror() and copies the
result to a thread-local buffer, then returns that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Kojedzinszky <richard@kojedz.in>
Closes#15793Closes#16640Closes#16923
