The flag VFCF_FILEREV was recently defined in FreeBSD
so that a file system could indicate that it increments
va_filerev by one for each change.
Since ZFS does do this, set the flag if defined for the
kernel being built. This allows the NFSv4.2 server to
reply with the correct change_attr_type attribute value.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closed#16976
Injecting a device probe failure is not possible by matching IO types,
because probe IO goes to the label regions, which is explicitly excluded
from injection. Even if it were possible, it would be awkward to do,
because a probe is sequence of reads and writes.
This commit adds a new IO "type" to match for injection, which looks for
the ZIO_FLAG_PROBE flag instead. Any probe IO will be match the
injection record and recieve the wanted error.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16947
I'm about to add a new "type", and I need somewhere to put it!
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16947
It's now a simple wrapper, so lets just call kstat direct.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Removes other custom helpers and direct accesses to /proc.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The old kstat helper function was barely used, I suspect in part because
it was very limited in the kinds of kstats it could gather.
This adds new functions to replace it, for each kind of thing that can
have stats: global, pool and dataset. There's options in there to get a
single stat value, or all values within a group.
Most importantly, the interface is the same for both platforms.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tim Smith <tsmith84@gmail.com>
Closes#16965
The warning at the end of the second example in the description section
was actually inside the options table. Move the El macro to match what
is done in the first section for improved readability.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Ziaee <ziaee@FreeBSD.org>
Closes#16962
2.3.0 is out now, so make 2.2.x the LTS release.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16945Closes#16948
Removed three unnecessary spaces in the definition of the
sa_attr_reg_t structure to improve code style consistency
and adhere to OpenZFS coding standards.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Peng Liu <littlenewton6@gmail.com>
Closes#16955
To do a cross-build using only kbuild rather than a full source tree,
ARCH= needs to be passed for the kbuild Makefile to find the
archspecific Makefile.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16944
When building tests with zinject, it can be quite difficult to work out
if you're producing the right kind of IO to match the rules you've set
up.
So, here we extend injection records to count the number of times a
handler matched the operation, and how often an error was actually
injected (ie after frequency and other exclusions are applied).
Then, display those counts in the `zinject` output.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16938
We should not hardcode 512-byte read size when checking for loader
in the boot area before RAIDZ expansion. Disk might be unable to
handle that I/O as is, and the code zio_vdev_io_start() handling
the padding asserts doing it only for top-level vdev.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16942
Added in b1e46f869, but empty, so no point keeping it around.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16931
In order to correctly cross-compile, one has to pass ARCH and
CROSS_COMPILE make flags to kernel module build calls. Facilitate this
in the same way as for custom CC flag by recognizing KERNEL_-prefixed
configure environment variables of same name.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Closes#16924
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Robert Evans <evansr@google.com>
Closes#16926
#15793 wanted to make zfs_strerror threadsafe, unfortunately, it
turned out that strerror_l() usage was wrong, and also, some libc
implementations dont have strerror_l().
zfs_strerror() now simply calls original strerror() and copies the
result to a thread-local buffer, then returns that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Kojedzinszky <richard@kojedz.in>
Closes#15793Closes#16640Closes#16923
Similar to what we saw in #16569, we need to consider that a
replacing vdev should not be considered as fully contributing
to the redundancy of a raidz vdev even though current IO has
enough redundancy.
When a failed vdev_probe() is faulting a disk, it now checks
if that disk is required, and if so it suspends the pool until
the admin can return the missing disks.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#16864
This updates the Makefile to be more correct for parallel make.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Robert Evans <evansr@google.com>
Closes#16030Closes#16922
Instead of using hardwired value for SPA_DISCARD_MEMORY_LIMIT,
use save_tunable and restore_tunable to restore the pre-test state.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#16919
It's possible for a vdev to be flagged for async remove after the pool
has suspended. If the removed device has been returned when the pool is
resumed, the ASYNC_REMOVE task will still run at the end of txg, and
remove the device from the pool again.
To fix, we clear the async remove flag at reopen, just as we did for the
async fault flag in 5de3ac223.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16921
Remove TESTDIRS as it is not set for pam tests.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#16920
This works around
/usr/lib/go-1.18/pkg/tool/linux_amd64/link:
mapping output file failed: invalid argument
It's happened to me under a Linux jail, but it's also happened to other
people, see https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=270247#c4
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: pstef <pstef@users.noreply.github.com>
Closes#16918
Originally hex value is used as decimal.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#16917
cleanup.ksh is assuming we have TESTDIRS set.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#16915
Before we can remove test files, we need to unmount datasets
used by test first.
See also: zfs_mount_all_mountpoints.ksh
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#16914
Added centos as optional runners via workflow_dispatch
removed centos-stream9 from the FULL_OS runner list as CentOS is not
officially support by ZFS. This commit will add preliminary support for
EL10 and allow testing ZFS ahead of EL10 codebase solidifying in ~6
months
Signed-off-by: James Reilly <jreilly1821@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
zfs_vget doesn't zfs_exit when erroring out due to snapdir
being disabled.
Signed-off-by: Andrew Walker <awalker@ixsystems.com>
Reviewed-by: @bmeagherix
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
zfs_arc_shrinker_limit was introduced to avoid ARC collapse due to
aggressive kernel reclaim. While useful, the current default (10000) is
too prone to OOM especially when MGLRU-enabled kernels with default
min_ttl_ms are used. Even when no OOM happens, it often causes too much
swap usage.
This patch sets zfs_arc_shrinker_limit=0 to not ignore kernel reclaim
requests. ARC now plays better with both kernel shrinker and pagecache
but, should ARC collapse happen again, MGLRU behavior can be tuned or
even disabled.
Anyway, zfs should not cause OOM when ARC can be released.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#16909
In Linux, block devices currently lack support for `copy_file_range`
API because the kernel does not provide the necessary functionality.
However, there is an ongoing upstream effort to address this
limitation: https://patchwork.kernel.org/project/dm-devel/cover/20240520102033.9361-1-nj.shetty@samsung.com/.
We have adopted this upstream kernel patch into the TrueNAS kernel and
made some additional modifications to enable block cloning specifically
for the zvol block device. This patch implements the platform-
independent portions of these changes for inclusion in OpenZFS.
This patch does not introduce any new functionality directly into
OpenZFS. The `TX_CLONE_RANGE` replay capability is only relevant when
zvols are migrated to non-TrueNAS systems that support Clone Range
replay in the ZIL.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#16901
This test takes 3 minutes on RELEASE FreeBSD bots, but on CURRENT,
probably due to debugging it has in kernel, it does not complete
within 10 minutes, ending up killed. As I see all the redacting
here happens within the first ~128MB of the file, so I hope it
won't matter if there is 1GB of data instead of 2GB.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by:Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#11141
procfs might be not mounted on FreeBSD. Plus checking for specific
PID might be not exactly reliable. Check for empty list of jobs
instead.
Premature loop exit can result in failed test and failed cleanup,
failing also some following tests.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by:Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#11141
FreeBSD recently removed non-standard hex numbers support from awk.
Neither it supports -n argument, enabling it in gawk. Instead of
depending on those rewrite list_file_blocks() fuction to handle the
hex math in shell instead of awk.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by:Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#11141
Confirming that clearing pool and vdev userprops produce the same
result: an empty value, with default source.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16887
People have noted there's no way to remove a pool userprop, only zero
it. Turns vdev userprops had a method, by setting empty-string. So this
makes pool userprops follow the same behaviour.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16887
If a vdev userprop is not found, present it as value '-', default
source, so it matches the output from pool userprops.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16887
Many RAIDZ/dRAID tests filled files doing millions of 100 or even
10 byte writes. It makes very little sense since we are not
micro-benchmarking syscalls or VFS layer here, while before the
blocks reach the vdev layer absolute majority of the small writes
will be aggregated. In some cases I see we spend almost as much
time creating the test files as actually running the tests. And
sometimes the tests even time out after that.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16905
The count of chunks in a microzap block is stored as an uint16_t
(mze_chunkid). Each chunk is 64 bytes, and the first is used to store a
header, so there are 32767 usable chunks, which is just under 2M. 1M is
the largest power-2-rounded block size under 2M, so we must set the
limit there.
If it goes higher, the loop in mzap_addent can overflow and fall into
the PANIC case.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16888
VDEV_PROP_USERPROP is equal do VDEV_PROP_INVAL and so is not a real
property. That's why vdev_prop_readonly() does not work right for
it. In particular it may declare all vdev user properties readonly
on FreeBSD.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16890
Setting sharenfs and sharesmb properties on a dataset can become costly
if there are large number of snapshots, since setting the share
properties iterates over all snapshots present for a dataset. If it is
the root dataset for which we are trying to set the share property,
snapshots for all child datasets and their children will also be
iterated.
There is no need to iterate over snapshots for share properties
because we do not allow share properties or any other property,
to be set on a snapshot itself execpt for user properties.
This commit skips iterating over snapshots for share properties,
instead iterate over all child dataset and their children for share
properties.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#16877
I guess we've got some long property names since this was first set up!
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16883
In #16869 we added FreeBSD 13.4 STABLE, but forget the special
thing, that the virtio nic within FreeBSD 13.x is buggy.
This fix adds the needed rtl8139 nic to the VM.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16885
It's a percentage and documented as such, but we were showing it as
<size>.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16881
Update the CI to include FreeBSD 14.2 as a regularly tested platform.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16869
As of kernel v5.8, pin_user_pages* interfaced were introduced. These
interfaces use the FOLL_PIN flag. This is preferred interface now for
Direct I/O requests in the kernel. The reasoning for using this new
interface for Direct I/O requests is explained in the kernel
documenetation:
Documentation/core-api/pin_user_pages.rst
If pin_user_pages_unlocked is available, the all Direct I/O requests
will use this new API to stay uptodate with the kernel API requirements.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16856
There were checks still in place to verify we could completely use
iov_iter's on the Linux side. All interfaces are available as of kernel
4.18, so there is no reason to check whether we should use that
interface at this point. This PR completely removes the UIO_USERSPACE
type. It also removes the check for the direct_IO interface checks.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16856
CONFIG_KERNEL_MODE_NEON depends on CONFIG_NEON. Neither is defined
on armel. Add a guard to avoid compilation errors.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Shengqi Chen <harry-chen@outlook.com>
Closes#16871
This is purely a cosmetic fix which removes a stray "no" from
the configure output.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16867
We should not dereference rra after the last zio_nowait() is called.
It seems very unlikely, but ASAN in ztest managed to catch it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16868
The one-shot zfs-mount.service is incorrectly deemed active by
Systemd after a systemctl soft-reboot. As such, soft-rebooting
prevents zfs mount -a from being ran automatically.
This commit makes it so that zfs-mount.service is marked as being
undone by the time umount.target is reached, so that zfs.target then
pulls it in again and gets it restarted after a soft reboot.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: kotauskas <v.toncharov@gmail.com>
Closes#16845
