dbuf_prefetch_impl() should look on level of current indirect, not
the target prefetch level. dbuf_prefetch_indirect_done() should
call dnode_level_is_l2cacheable() if we have dpa_dnode to pass it.
It should fix some both false positive and negative L2ARC caching.
While there, fix redacted feature activation assertions. One was
always true, while another could give false positive if dpa_dnode
is NULL.
George Amanakis <gamanakis@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17204
The problem was identified in handling of the zpool get state command
line arguments. A pointer vdev was used to point to the argv[1], and
its address set to cb.cb_vdevs.cb_names(pointer to array of strings)
so any increment to cb_names resulted in a segfault. Fix covers a
special case of root parameter at argv[1] and remaining cases are
handled by passing in the argv + 1, which allows cb_names iteration
of next command line arguments (vdevs).
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Signed-off-by: Syed Shahrukh Hussain <syed.shahrukh@ossrevival.org>
When a dedup write fails, we try to roll the DDT entry back to a known
good state. However, this also rolls the refcounts and the last-update
time back to the state they were at when we started this write. This
doesn't appear to be able to cause any refcount leaks (after the fix in
17123). This PR prevents that from happening by only rolling back the
parts of the DDT entry that have been updated by the write so far.
Sponsored-by: iXsystems, Inc.
Sponsored-by: Klara, Inc.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Extend project quota test coverage to verify defaultprojectquota
behavior. These build on existing project quota tests with additional
cases specific to defaultprojectquota functionality.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Extend test coverage to verify default user and group quota
functionality. These build on existing user/group quota tests with
additional cases specific to default quotas functionality.
Added on top of: https://github.com/openzfs/zfs/pull/16283/commits/e08cd97
Signed-off-by: Todd Seidelmann <seidelma@wharton.upenn.edu>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Update zfs userspace, groupspace, and projectspace to display the
default quotas when no per-ID specific quota is configured. This
ensures tool outputs align with enforced limits.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Ensure default user/group/project quotas are visible through quota
tools and filesystem stats when no per-ID quota is configured. This
maintains consistency between quota visibility and configured defaults.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Update zfs_id_overobjquota() and zfs_id_overblockquota() to enforce
default user/group/project quotas (block and object-based) when no
per-user, per-group, or per-project quota exists. If a specific quota
is not configured for an ID, the default quota value is applied.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This adds default userquota, groupquota, and projectquota properties to
MASTER_NODE_OBJ to make them accessible during zfsvfs_init() (regular
DSL properties require dsl_config_lock, which cannot be safely acquired
in this context). The zfs_fill_zplprops_impl() logic is updated to read
these default properties directly from MASTER_NODE_OBJ.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
When opening a vdev and setting the nonrot property, we used to wait for
each child to be opened before examining its nonrot property. When the
change was made to open vdevs asynchronously, we didn't move the nonrot
check out of the main loop. As a result, the nonrot property is almost
always set to false, regardless of the actual type of the underlying
disks. The fix is simply to move the nonrot check to a separate loop
after the taskq has been waited for.
Sponsored-by: Klara, Inc.
Sponsored-by: Eshtek, Inc.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Currently, the zfs initramfs-tools boot script under local-top calls
`vgchange -ay`, which unconditionally activates all logical volumes
(LVs) in all discovered volume groups (VGs). This causes all LVs to be
active after boot. However, users may prefer to not activate certain
VGs/LVs on boot. They might normally use the `--setautoactivation n`
VG/LV flag or the `auto_activation_volume_list` LVM config option to
achieve this, but since the script unconditionally activates all LVs,
neither has an effect.
To fix this, call `vgchange -aay` instead. This triggers LVM
autoactivation, which honors autoactivation settings such as the
`--setautoactivation` flag. It is also more in line with the LVM
documentation, which says autoactivation is "meant to be used by
activation commands that are run automatically by the system" [1].
Note that this change might break misconfigured setups that have ZFS
on top of an LV for which autoactivation is disabled.
[1] https://gitlab.com/lvmteam/lvm2/-/blob/cff93e4d/conf/example.conf.in#L1579
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Friedrich Weber <f.weber@proxmox.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
cmd/zinject/zinject.c:
- use PRIu64 when printing uint64_t
tests/zfs-tests/cmd/clonefile.c:
- use an unsigned long long to store result from strtoull()
- use %jd for printing off_t, %zu for size_t, %zd for ssize_t
tests/zfs-tests/tests/functional/vdev_disk/page_alignment.c:
- use %zx to print size_t
Discovered when compiling on FreeBSD i386.
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: @ImAwsumm
FreeBSD kernel's WITNESS code detected lock ordering violation in
spa_vdev_remove_cancel_sync(). It took svr_lock while holding
ms_lock, which is opposite to other places. I was thinking to
resolve it similar to #17145, but looking closer I don't think
we even need svr_lock at that point, since we already asserted
svr_allocd_segs is empty, and we don't need to add there segments
we are going to call free_mapped_segment_cb for.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17164
Since spa_dspace accounts only normal allocation class space,
spa_nonallocating_dspace should do the same. Otherwise we may get
negative overflow or respective assertion spa_update_dspace() if
removed special/dedup vdev is bigger than all normal class space.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17183
FreeBSD nowadays supports FPU in the kernel on powerpc*, so enable it.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Piotr Kubaj <pkubaj@FreeBSD.org>
Closes#17191
Firmly in the "shouldn't happen" camp, but at least GCC 7.4 (Ubuntu
18.04) complained about them, and it's easy to shut up, so do so.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17189
Previous code allowed each metaslab group to have different number
of allocators. But in practice it worked only for embedded SLOGs,
relying on a number of conditions and creating a significant mine
field if any of those change. I just stepped on one myself.
This change makes all groups to have spa_alloc_count allocators.
It may cost us extra 192 bytes of memory per normal top-level vdev
on large systems, but I find it a small price for cleaner and more
reliable code.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Fixes#17188
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
In addition to hotplug events, the kernel may also mark a failing vdev
as REMOVED. This was observed in a customer report and reproduced by
forcing the NVMe host driver to disable the device after a failed reset
due to command timeout. In such cases, the spare was not activated
because the device had already transitioned to a REMOVED state before
zed processed the event.
To address this, explicitly attempt hot spare activation when the
kernel marks a device as REMOVED.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17187
Kernel checks are the heaviest part of the configure checks. This allows
the results to be cached through the normal autoconf cache.
Since we don't want to reuse cached values for different kernels, but
don't want to discard the entire cache on every kernel, we instead add a
short checksum to kernel config cache keys, based on the version and
path, so the cache can hold results for multiple different kernels.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
When after device removal we handle block pointers remap, skip blocks
that might be cloned. BRTs are indexed by vdev id and offset from
block pointer's DVA[0]. So if we start addressing the same block by
some different DVA, we won't get the proper reference counter. As
result, we might either remap the block twice, that may result in
assertion during indirect mapping condense, or free it prematurely,
that may result in data overwrite, or free it twice, that may result
in assertion in spacemap code.
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#15604Closes#17180
The initial tarballs we built for for zfs-2.3.1 were incorrect since
they did not have a ./configure script, and their files were not
in a top level zfs-2.3.1/ directory. This commit copies the way we
built them on buildbot so the tarballs are created as expected.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
The zfs-qemu-packages workflow was incorrectly copying the built
zfs-release RPMs to ~/zfsonlinux.github.com rather than ~/zfs. This
meant that the RPMs were not being correctly picked in the artifacts
files. This fixes the issue.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: @ImAwsumm
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
It turns out that approach taken in the original version of the patch
was wrong. So now, we're taking approach in-line with how kernel
actually does it - when sb is being torn down, access to it
is serialized via sb->s_umount rwsem, only when that lock is taken
is it okay to work with s_flags - and the other mistake I was doing
was trying to make SB_ACTIVE work, but apparently the kernel checks
the negative variant - not SB_DYING and not SB_BORN.
Kernels pre-6.6 don't have SB_DYING, but check if sb is hashed
instead.
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Update the META file to reflect compatibility with the 6.14
kernel.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: @ImAwsumm
Update 'zfs-helpers.sh -i' to install the compatibility.d/ file
symlinks. These are need to run the zpool_status_features_001_pos test
from a local workspace (as opposed to running ZTS from a formal
'make install' or install from RPMs, which are unaffected).
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: @ImAwsumm
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
A minor nitpick that is kind of obvious based on the surrounding context
and reference to powers of two. It's better to be explicit, though.
Signed-off-by: Simon Howard <fraggle@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Unlike some of my other fixes which are more subtle, these are
unambigously spelling errors.
Signed-off-by: Simon Howard <fraggle@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
This is admittedly a nitpicky change, but `umount` is the command that
performs an *unmount*. So if we are talking about unmounting something
we should phrase it that way.
Signed-off-by: Simon Howard <fraggle@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
These are mostly acronyms (CPUs; ZILs) but also proper nouns such as
"Unix" and "Unicode" which should also be capitalized.
Signed-off-by: Simon Howard <fraggle@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
As per Wiktionary: "descendent" may be used as an adjective (e.g.
"a descendent dataset") but for nouns (e.g. "descendants of this
dataset"), "descendant" is the correct spelling.
Signed-off-by: Simon Howard <fraggle@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
This is the most common way it is written throughout the manpages, but
there are a few cases where it is written slightly differently.
Signed-off-by: Simon Howard <fraggle@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Most of the documentation is written in American English, so it makes
sense to be consistent.
Signed-off-by: Simon Howard <fraggle@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Existing allocation throttling had a goal to improve write speed
by allocating more data to vdevs that are able to write it faster.
But in the process it completely broken the original mechanism,
designed to balance vdev space usage. With severe vdev space use
imbalance it is possible that some with higher use start growing
fragmentation sooner than others and after getting full will stop
any writes at all. Also after vdev addition it might take a very
long time for pool to restore the balance, since the new vdev does
not have any real preference, unless the old one is already much
slower due to fragmentation. Also the old throttling was request-
based, which was unpredictable with block sizes varying from 512B
to 16MB, neither it made much sense in case of I/O aggregation,
when its 32-100 requests could be aggregated into few, leaving
device underutilized, submitting fewer and/or shorter requests,
or in opposite try to queue up to 1.6GB of writes per device.
This change presents a completely new throttling algorithm. Unlike
the request-based old one, this one measures allocation queue in
bytes. It makes possible to integrate with the reworked allocation
quota (aliquot) mechanism, which is also byte-based. Unlike the
original code, balancing the vdevs amounts of free space, this one
balances their free/used space fractions. It should result in a
lower and more uniform fragmentation in a long run.
This algorithm still allows to improve write speed by allocating
more data to faster vdevs, but does it in more controllable way.
On top of space-based allocation quota, it also calculates minimum
queue depth that vdev is allowed to maintain, and respectively the
amount of extra allocations it can receive if it appear faster.
That amount is based on vdev's capacity and space usage, but also
applied only when the pool is busy. This way the code can choose
between faster writes when needed and better vdev balance when not,
with the choice gradually reducing together with the free space.
This change also makes allocation queues per-class, allowing them
to throttle independently and in parallel. Allocations that are
bounced between classes due to allocation errors will be able to
properly throttle in the new class. Allocations that should not
be throttled (ZIL, gang, copies) are not, but may still follow
the rotor and allocation quota mechanism of the class without
disrupting it.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
They are out of support and we are really low on CI resources.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
This extends the existing special-case for zfs/poolname to split and
create any number of intermediate sysctl names, so that multi-level
module names are possible.
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Module names are mapped directly to directory names in procfs, but
nothing is done to create the intermediate directories, or remove them.
This makes it impossible to sensibly present kstats about sub-objects.
This commit loops through '/'-separated names in the full module name,
creates a separate module for each, and hooks them up with a parent
pointer and child counter, and then unrolls this on the other side when
deleting a module.
Sponsored-by: Klara, Inc.
Sponsored-by: Syneto
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Missed in #17073, probably because that PR was branched before #17001
was landed and never rebased.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The redundant_metadata setting in ZFS allows users to trade resilience
for performance and space savings. This applies to all data and metadata
blocks in zfs, with one exception: gang blocks. Gang blocks currently
just take the copies property of the IO being ganged and, if it's 1,
sets it to 2. This means that we always make at least two copies of a
gang header, which is good for resilience. However, if the users care
more about performance than resilience, their gang blocks will be even
more of a penalty than usual.
We add logic to calculate the number of gang headers copies directly,
and store it as a separate IO property. This is stored in the IO
properties and not calculated when we decide to gang because by that
point we may not have easy access to the relevant information about what
kind of block is being stored. We also check the redundant_metadata
property when doing so, and use that to decide whether to store an extra
copy of the gang headers, compared to the underlying blocks.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
There was a recent CI ZTS test failure on FreeBSD 14 for the
dio_read_verify test case. The failure reported there was no ARC reads
while the buffer wes being manipulated. All checksum verify errors for
Direct I/O reads are rerouted through the ARC, so there should be ARC
reads accounted for. In order to help debug any future failures of this
test case, the order of checks has been changed. First there is a check
for DIO verify failures for the reads and then ARC read counts are
checked.
This PR also contains general cleanup of the comments in the test
script.
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
spa_vdev_remove_thread() should not hold svr_lock while loading a
metaslab. It may block ZIO threads, required to handle metaslab
loading, at least in case of read errors causing recovery writes.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17145
The vd->vdev_ms access can overflow due to on-disk corruption, not just
due to programming bugs. So it makes sense to check its boundaries even
in production builds.
Sponsored by: ConnectWise
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#17136
- Don't drop L2ARC header if we have more buffers in this header.
Since we leave them the header, leave them the L2ARC header also.
Honestly we are not required to drop it even if there are no other
buffers, but then we'd need to allocate it a separate header, which
we might drop soon if the old block is really deleted. Multiple
buffers in a header likely mean active snapshots or dedup, so we
know that the block in L2ARC will remain valid. It might be rare,
but why not?
- Remove some impossible assertions and conditions.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17126
