The Realtek RTS5411 is a USB 3.0 hub controller with 4 ports.
This initial version of the binding only describes USB related
aspects of the RTS5411, it does not cover the option of
connecting the controller as an i2c slave.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210609150159.v12.1.I248292623d3d0f6a4f0c5bc58478ca3c0062b49a@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The list indentation should always be 2 spaces more than the preceding
keyword. A few of the items are only using 1 space, and resulting in
warnings with dt_binding_check. Fix these.
Fixes: cf107e98d0 ("dt-bindings: remoteproc: qcom: pas: Convert binding to YAML")
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210603142639.8335-1-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The allwinner,sun6i-a31-hwspinlock.yaml binding has a mismatched
$id and fails to compile the example due to undefined args specifier
values for clocks and resets. Fix both of these issues.
Acked-by: Rob Herring <robh@kernel.org>
Fixes: f9e784dcb6 ("dt-bindings: hwlock: add sun6i_hwspinlock")
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210603144216.10327-1-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the dwmac bindings for the JZ4775 SoC, the X1000 SoC,
the X1600 SoC, the X1830 SoC and the X2000 SoC from Ingenic.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SGTL5000 codec can be connected via audio-graph-card,
add the missing port: entry into the bindings.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20210610150135.29905-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The "sdhci" compatible is not documented though used as a fallback in a
few cases. It is also not supported by a Linux driver. Just remove the
example as part of ridding examples of undocumented bindings.
The "brcm,bcm43xx-fmac" compatible is also not documented. Update the
example to use one of the correct ones, "brcm,bcm4329-fmac", instead and
use a device class based nodename.
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210519153712.3146025-1-robh@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
HS400 requires a data strobe line in addition to the usual MMC signal
lines. If a board design neglects to wire up this signal, HS400 mode is
not available, even if both the controller and the eMMC are claiming to
support this mode. Add a DT flag to allow boards to disable the HS400
support in this case.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210510190400.105162-1-l.stach@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert the Renesas Multi Media Card Interface (MMCIF) Device Tree
binding documentation to json-schema.
Document missing properties.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/04b97315fed0f4f512356b68f9f5bb6ed7adc41f.1620648698.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc" compatibles for
mmc nodes on a rk3568 platform to rockchip-dw-mshc.yaml. Let's also take to
opportunity to clean up some old redundant comments around previous
compatibles.
Signed-off-by: Liang Chen <cl@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210429081151.17558-4-cl@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The commit 7c7905df68 ("dt-bindings: mmc: sdhci-am654: fix compatible
for j7200") switched the compatible property from a regular enum to an
more appropriate combinatorial oneOf convention, and in the process has
introduced a duplicate ti,j721e-sdhci-4bit.
This generated the following warning on J721E boards that use the
ti,j721e-sdhci-4bit for two nodes:
"mmc@4fb0000: compatible: More than one condition true in oneOf schema"
"mmc@4f98000: compatible: More than one condition true in oneOf schema"
Remove the duplicate to fix this.
Fixes: 7c7905df68 ("dt-bindings: mmc: sdhci-am654: fix compatible for j7200")
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210428230500.19214-1-s-anna@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC
connected over SoundWire. This device has two SoundWire devices RX and
TX respectively. This bindings is for those slave devices on WCD9380/WCD9385.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210609090943.7896-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC
connected over SoundWire. This device has two SoundWire device RX and
TX respectively, supporting 4 x ADCs, ClassH, Ear, Aux PA, 2xHPH,
7 x TX diff inputs, 8 DMICs, MBHC.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210609090943.7896-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The legacy clock binding are not maintained anymore. It has only
a very preliminary supported clocks during initial upstream and
meaningless for users. So drop it from binding doc now.
Cc: devicetree@vger.kernel.org
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
There is a typo in binding doc that the name of compatible string of
scu clock should be "fsl,xxx-clk" rather than "fsl,xxx-clock".
In reality, both example and dts using "fsl,xxx-clk", so fixing the doc
is enough.
Cc: devicetree@vger.kernel.org
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into usb-next
We want the usb fixes in here as well, and this resolves some merge
issues with:
drivers/usb/dwc3/debugfs.c
drivers/usb/dwc3/gadget.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into tty-next
We want the tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into staging-next
We want the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into char-misc-next
We need the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BMA254 is very similar to BMA253/BMA255 which are both supported by
the bmc150-accel driver. In general, there is quite some overlap between
the bma180 and bmc150-accel driver, but the bmc150-accel driver has a few
more features (e.g. motion trigger/interrupt).
Let's move bma254 over to the bma255 schema (bmc150-accel driver).
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-10-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
BMA253 has two interrupt pins (INT1 and INT2) that can be configured
independently. At the moment the bmc150-accel driver does not make use
of them but it might be able to in the future, so it's useful to already
specify all available interrupts in the device tree.
Set maxItems: 2 for interrupts to allow specifying a second one.
This is necessary as preparation to move the bosch,bma254 compatible
from bosch,bma180.yaml to bosch,bma255.yaml since bma180 allows two
interrupts, but BMA254 is better supported by the bmc150-accel driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-9-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
BMA253 is mostly like BMA255 that is already supported by the
bmc150-accel driver. Document an extra bosch,bma253 compatible for it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-7-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add 25gbase-r PHY interface mode.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are a number of tiny USB fixes for 5.13-rc6.
There are more than I would normally like, but there's been a bunch of
people banging on the gadget and dwc3 and typec code recently for I
think an Android release, which has resulted in a number of small fixes.
It's nice to see companies send fixes upstream for this type of work, a
notable change from years ago.
Anyway, fixes in here are:
- usb-serial device id updates
- usb-serial cp210x driver fixes for broken firmware versions
- typec fixes for crazy charging devices and other reported
problems
- dwc3 fixes for reported problems found
- gadget fixes for reported problems
- tiny xhci fixes
- other small fixes for reported issues.
- revert of a problem fix found by linux-next testing
All of these have passed 0-day and linux-next testing with no reported
problems (the revert for the found linux-next build problem included).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYMS6uA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yknTgCeKSmtJABTIcZ3LLRgArqUFEroUqEAni2ZRv/8
3mGzeXFKvvoEO/WoILmV
=WqGE
-----END PGP SIGNATURE-----
Merge tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of tiny USB fixes for 5.13-rc6.
There are more than I would normally like, but there's been a bunch of
people banging on the gadget and dwc3 and typec code recently for I
think an Android release, which has resulted in a number of small
fixes. It's nice to see companies send fixes upstream for this type of
work, a notable change from years ago.
Anyway, fixes in here are:
- usb-serial device id updates
- usb-serial cp210x driver fixes for broken firmware versions
- typec fixes for crazy charging devices and other reported problems
- dwc3 fixes for reported problems found
- gadget fixes for reported problems
- tiny xhci fixes
- other small fixes for reported issues.
- revert of a problem fix found by linux-next testing
All of these have passed 0-day and linux-next testing with no reported
problems (the revert for the found linux-next build problem included)"
* tag 'usb-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (44 commits)
Revert "usb: gadget: fsl: Re-enable driver for ARM SoCs"
usb: typec: mux: Fix copy-paste mistake in typec_mux_match
usb: typec: ucsi: Clear PPM capability data in ucsi_init() error path
usb: gadget: fsl: Re-enable driver for ARM SoCs
usb: typec: wcove: Use LE to CPU conversion when accessing msg->header
USB: serial: cp210x: fix CP2102N-A01 modem control
USB: serial: cp210x: fix alternate function for CP2102N QFN20
usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource()
usb: dwc3: ep0: fix NULL pointer exception
usb: gadget: eem: fix wrong eem header operation
usb: typec: intel_pmc_mux: Put ACPI device using acpi_dev_put()
usb: typec: intel_pmc_mux: Add missed error check for devm_ioremap_resource()
usb: typec: intel_pmc_mux: Put fwnode in error case during ->probe()
usb: typec: tcpm: Do not finish VDM AMS for retrying Responses
usb: fix various gadget panics on 10gbps cabling
usb: fix various gadgets null ptr deref on 10gbps cabling.
usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir
usb: f_ncm: only first packet of aggregate needs to start timer
USB: f_ncm: ncm_bitrate (speed) is unsigned
MAINTAINERS: usb: add entry for isp1760
...
mainly:
- I2S Support for the V3
- Audio Codec Support for the V3s
- DMA support for the V3s
- PWM support for the V3s
- Support for Bluetooth Audio on the pinephone
- Add A10-like timers to the A64 and R40
- New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYMN5hwAKCRDj7w1vZxhR
xa2sAP0Y4UY9ncxWmuTUMgi4osqscowxGUsCHdfxP+Yk9/IJ8wEAqKA5tfior25d
guy+cgXft/CixRtgv6Go3W55tJpZ6wQ=
=A9Cb
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches to improve the Allwinner SoCs support,
mainly:
- I2S Support for the V3
- Audio Codec Support for the V3s
- DMA support for the V3s
- PWM support for the V3s
- Support for Bluetooth Audio on the pinephone
- Add A10-like timers to the A64 and R40
- New boards: Forlinx OKA40i-C, Forlinx OKA40i-C, NanoPi R1S H5
* tag 'sunxi-dt-for-5.14-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (29 commits)
ARM: dts: sun8i: v3s: enable emac for zero Dock
arm64: dts: allwinner: pinephone: Set audio card name
ARM: dts: sun8i: r40: Add timer node
ARM: dts: sun8i: V3: add I2S interface to V3 dts
dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible
ARM: dts: sun8i: V3: add codec analog frontend to V3 dts
ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3
ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts
ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA
ARM: dts: sun8i: v3s: add DMA controller to v3s dts
ARM: dts: sun8i: v3s: add pwm controller to v3s dts
dt-bindings: pwm: allwinner: add v3s pwm compatible
arm64: dts: allwinner: h5: Add NanoPi R1S H5 support
dt-bindings: arm: Add NanoPi R1S H5
arm64: dts: allwinner: pinephone: Add support for Bluetooth audio
arm64: dts: allwinner: a64: Allow multiple DAI links
arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3
arm64: dts: allwinner: a64: Allow using multiple codec DAIs
ARM: dts: sun8i-a33: Allow using multiple codec DAIs
ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells
...
Link: https://lore.kernel.org/r/96cc77ec-139d-4685-8a66-a60964cf39fd.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
Bigger work around ARM Primecell PL35x SMC memory controller driver by
Miquel Raynal built on previous series from Naga Sureshkumar Relli.
This includes bindings cleanup and correction, converting these to
dtschema and several cleanyps in pl353-smc driver.
-----BEGIN PGP SIGNATURE-----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=iNR6
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-pl353-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.14 - PL353
Bigger work around ARM Primecell PL35x SMC memory controller driver by
Miquel Raynal built on previous series from Naga Sureshkumar Relli.
This includes bindings cleanup and correction, converting these to
dtschema and several cleanyps in pl353-smc driver.
* tag 'memory-controller-drv-pl353-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-binding: memory: pl353-smc: Convert to yaml
MAINTAINERS: Add PL353 SMC entry
memory: pl353-smc: Declare variables following a reverse christmas tree order
memory: pl353-smc: Avoid useless acronyms in descriptions
memory: pl353-smc: Let lower level controller drivers handle inits
memory: pl353-smc: Rename goto labels
memory: pl353-smc: Fix style
dt-binding: memory: pl353-smc: Fix the NAND controller node in the example
dt-binding: memory: pl353-smc: Drop unsupported nodes from the example
dt-binding: memory: pl353-smc: Fix the example syntax and style
dt-binding: memory: pl353-smc: Describe the child reg property
dt-binding: memory: pl353-smc: Drop the partitioning section
dt-binding: memory: pl353-smc: Document the range property
dt-binding: memory: pl353-smc: Rephrase the binding
Link: https://lore.kernel.org/r/20210611140659.61980-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- A fix for sama5d4 gpio mux
- A trivial fix for DT documentation
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYMNX7gAKCRAfOrpwrNPN
DJa1AQCeS3dhkLRYeDZ56/QLM5fEOc8Udqml4JS2iGX16wJ9hQD9FdBKiXbRUvUV
mq2JQ0C1smb6Ro5KPpHqlpJTtIfxNAE=
=HggT
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 dt for 5.14:
- A fix for sama5d4 gpio mux
- A trivial fix for DT documentation
* tag 'at91-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: i2c: at91: fix example for scl-gpios
ARM: dts: at91: sama5d4: fix pinctrl muxing
Link: https://lore.kernel.org/r/20210611123446.20510-1-nicolas.ferre@microchip.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- add missing MODULE_DEVICE_TABLE to fix modalias
mkt-pm-domains:
- register smi node as regmap and not as syscon
- prepare-enable and unprepare-disable dependent clocks
pwrap:
- add support for MT8195
-----BEGIN PGP SIGNATURE-----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=ydya
-----END PGP SIGNATURE-----
Merge tag 'v5.13-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
devapc:
- add missing MODULE_DEVICE_TABLE to fix modalias
mkt-pm-domains:
- register smi node as regmap and not as syscon
- prepare-enable and unprepare-disable dependent clocks
pwrap:
- add support for MT8195
* tag 'v5.13-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: pwrap: add pwrap driver for MT8195 SoC
dt-bindings: mediatek: add compatible for MT8195 pwrap
soc: mtk-pm-domains: Fix the clock prepared issue
soc: mtk-pm-domains: do not register smi node as syscon
soc: mediatek: add missing MODULE_DEVICE_TABLE
Link: https://lore.kernel.org/r/479ec9ad-95d3-ce91-8243-63596c4c6676@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Document support for the new RZ/G2L, RZ/G2LC, and RZ/G2UL SoCs,
- Document support for the new RZ/G2L SMARC EVK board.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYMMo+AAKCRCKwlD9ZEnx
cEbVAP9U5LZ0bf+eETTIrpwkGNc8O2iJ4NRmFkdhpPa60S2MPwEA14Vjx36RrIxb
1pDLka0B3WK5u/b31N4ut88v7658iw0=
=tqZR
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v5.14
- Document support for the new RZ/G2L, RZ/G2LC, and RZ/G2UL SoCs,
- Document support for the new RZ/G2L SMARC EVK board.
* tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: power: renesas,rzg2l-sysc: Add DT binding documentation for SYSC controller
dt-bindings: arm: renesas: Document SMARC EVK
dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC
Link: https://lore.kernel.org/r/cover.1623403802.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
for 5.14, please pull the following:
- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
files to resolve a number of DT binding check warnings pertaining to
NAND, pinmux, clocks, SPI
- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
causing regressions on the Raspberry Pi 4B
- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
off that variant properly
- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
re-organization work and finally adding the DTS file proper
-----BEGIN PGP SIGNATURE-----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=ZmMv
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.14, please pull the following:
- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
files to resolve a number of DT binding check warnings pertaining to
NAND, pinmux, clocks, SPI
- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
causing regressions on the Raspberry Pi 4B
- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
off that variant properly
- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
re-organization work and finally adding the DTS file proper
* tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Add reference to RPi 400
ARM: dts: Add Raspberry Pi 400 support
ARM: dts: bcm283x: Fix up GPIO LED node names
dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
ARM: dts: Move BCM2711 RPi specific into separate dtsi
ARM: dts: bcm283x: Fix up MMC node names
ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible
Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"
ARM: dts: BCM5301X: Fixup SPI binding
dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema
ARM: dts: BCM5301X: Fix pinmux subnodes names
ARM: dts: Hurricane 2: Fix NAND nodes names
ARM: dts: BCM63xx: Fix NAND nodes names
ARM: NSP: dts: fix NAND nodes names
ARM: Cygnus: dts: fix NAND nodes names
ARM: brcmstb: dts: fix NAND nodes names
ARM: dts: BCM5301X: Fix NAND nodes names
Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Highlights:
-----------
MCU part:
- Fixes for Yaml verifications
MPU part:
- Configure qspi's mdma transfer to block for stm32mp151
- ST boards:
- Fixes for yaml verifications
- DH boards:
- Fixes for yaml verifications
- Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.
- Odyssey boards:
- fix Sd card detectection (gpio line updated)
- fix eMMC VQMMC suuply (use vdd instead of v3v3)
-----BEGIN PGP SIGNATURE-----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=RUQs
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.14, round 1
Highlights:
-----------
MCU part:
- Fixes for Yaml verifications
MPU part:
- Configure qspi's mdma transfer to block for stm32mp151
- ST boards:
- Fixes for yaml verifications
- DH boards:
- Fixes for yaml verifications
- Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.
- Odyssey boards:
- fix Sd card detectection (gpio line updated)
- fix eMMC VQMMC suuply (use vdd instead of v3v3)
* tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: fix stpmic node for stm32mp1 boards
ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM
ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
ARM: dts: stm32: add a new DCMI pins group on stm32mp15
ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
dt-bindings: net: document ptp_ref clk in dwmac
ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings
ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
ARM: dts: stm32: fix RCC node name on stm32f429 MCU
ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM
Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This tag adds support for the Microchip Sparx5 Switch Reset controller
and contains some small fixes and cleanups in core and various drivers.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCYJvZbRcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwLVVAP0Wr2d8eQ7BPHIau4ewshPnjqLC
6hNy34HKbne5w6Ex9QEAnTmokTIibu++m8hs2BYMaouNcjck3CR8EuXKbyY8DQk=
=5CsH
-----END PGP SIGNATURE-----
Merge tag 'reset-for-v5.14' of git://git.pengutronix.de/pza/linux into arm/drivers
Reset controller updates for v5.14
This tag adds support for the Microchip Sparx5 Switch Reset controller
and contains some small fixes and cleanups in core and various drivers.
* tag 'reset-for-v5.14' of git://git.pengutronix.de/pza/linux:
reset: brcmstb: Add missing MODULE_DEVICE_TABLE
reset: a10sr: add missing of_match_table reference
reset: RESET_INTEL_GW should depend on X86
reset: RESET_BRCMSTB_RESCAL should depend on ARCH_BRCMSTB
reset: uniphier: enclose UNIPHIER_RESET_ID_END value in parentheses
reset: sti/syscfg: replace comma with semicolon
reset: ti-syscon: fix to_ti_syscon_reset_data macro
reset: berlin: replace unsigned with unsigned int
reset: whitespace fixes
reset: mchp: sparx5: add switch reset driver
dt-bindings: reset: microchip sparx5 reset driver bindings
reset: oxnas: replace file name with short description
reset: zynqmp: replace spaces with tabs
reset: bcm6345: Make reset_control_ops const
Link: https://lore.kernel.org/r/418cf3a460cfe1d0f91f87e10baaf478bd41f1d5.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
Document the compatible for GE B1x5pv2 boards.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8M Nano has a similar power domain controller to that of the
mini, but it isn't fully compatible, so it needs a separate binding
and power domain tables.
Add the bindings and tables.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The reset-gpios property is added to the optional dt-bindings and
also an example for it's usage.
Signed-off-by: Andreas Kaessens <akaessens@gmail.com>
Signed-off-by: Darian Biastoch <d.biastoch@gmail.com>
Link: https://lore.kernel.org/r/20210610132438.3085841-2-akaessens@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert ti,am654-hbmc.txt to YAML schema for better checks and
validations of DT.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Bigger work around ARM Primecell PL35x SMC memory controller driver by
Miquel Raynal built on previous series from Naga Sureshkumar Relli.
This includes bindings cleanup and correction, converting these to
dtschema and several cleanyps in pl353-smc driver.
-----BEGIN PGP SIGNATURE-----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=iNR6
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-pl353-5.14' into nand/next
Memory controller drivers for v5.14 - PL353
Bigger work around ARM Primecell PL35x SMC memory controller driver by
Miquel Raynal built on previous series from Naga Sureshkumar Relli.
This includes bindings cleanup and correction, converting these to
dtschema and several cleanyps in pl353-smc driver.
- A single fix for broken media/renesas,drif.yaml binding schema
-----BEGIN PGP SIGNATURE-----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=Fe3R
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fix from Rob Herring:
"A single fix for broken media/renesas,drif.yaml binding schema"
* tag 'devicetree-fixes-for-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
media: dt-bindings: media: renesas,drif: Fix fck definition
A bit more commits than expected at this time, but likely it's the
last shot before the final. Many of changes are device-specific
fix-ups for various ASoC drivers, while a few usual HD-audio
quirks and a FireWire fix, as well as a couple of ALSA / ASoC
core fixes. All look nice and small, and nothing to scare much.
-----BEGIN PGP SIGNATURE-----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=ksfP
-----END PGP SIGNATURE-----
Merge tag 'sound-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bit more commits than expected at this time, but likely it's the
last shot before the final.
Many of changes are device-specific fix-ups for various ASoC drivers,
while a few usual HD-audio quirks and a FireWire fix, as well as a
couple of ALSA / ASoC core fixes.
All look nice and small, and nothing to scare much"
* tag 'sound-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: seq: Fix race of snd_seq_timer_open()
ALSA: hda/realtek: fix mute/micmute LEDs for HP ZBook Power G8
ALSA: hda/realtek: headphone and mic don't work on an Acer laptop
ASoC: qcom: lpass-cpu: Fix pop noise during audio capture begin
ALSA: firewire-lib: fix the context to call snd_pcm_stop_xrun()
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 840 Aero G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP EliteBook x360 1040 G8
ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Elite Dragonfly G2
ASoC: rt5682: Fix the fast discharge for headset unplugging in soundwire mode
ASoC: tas2562: Fix TDM_CFG0_SAMPRATE values
ASoC: meson: gx-card: fix sound-dai dt schema
ASoC: AMD Renoir: Remove fix for DMI entry on Lenovo 2020 platforms
ASoC: AMD Renoir - add DMI entry for Lenovo 2020 AMD platforms
ASoC: SOF: reset enabled_cores state at suspend
ASoC: fsl-asoc-card: Set .owner attribute when registering card.
ASoC: topology: Fix spelling mistake "vesion" -> "version"
ASoC: rt5659: Fix the lost powers for the HDA header
ASoC: core: Fix Null-point-dereference in fmt_single_name()
Added enum and string for FRAM (ferroelectric RAM) to expose it as file
named "fram".
Added documentation of sysfs file.
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Link: https://lore.kernel.org/r/20210611094601.95131-2-jiri.prchal@aksignal.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds documentation for Device-Tree bindings for the
SL3516-ce cryptographic offloader driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ARM SMMU instantiations found on Tegra186 and later need inter-
operation with the memory controller in order to correctly program
stream ID overrides.
Furthermore, on Tegra194 multiple instances of the SMMU can gang up
to achieve higher throughput. In order to do this, they have to be
programmed identically so that the memory controller can interleave
memory accesses between them.
Add the Tegra186 compatible string to make sure the interoperation
with the memory controller can be enabled on that SoC generation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210603164632.1000458-3-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add a compatible for MDM9607. It uses the "legacy" calling
convention.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013058.54299-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This SoC while being from 8916 era, makes use of the
newer-style, floor-level management, instead of the older
floor-corner.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013233.54666-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
To be fully valid, the NAND controller node in the example should be
named nand-controller instead of flash, should be at the address @0,0
instead of @e1000000 and should have a couple of:
- #address-cells
- #size-cells
properties.
The label is being renamed nfc0 as well which is more usual than nand_0.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210610082040.2075611-8-miquel.raynal@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
These nodes are given as examples and are not described nor used
anywhere else. There is also no hardware of my knowledge compatible with
these yet. If we want to be backward compatible, then we should avoid
partially describing nodes and their content while there are no users.
Plus, the examples are wrong (the addresses should be updated) so
let's drop them before converting this file to yaml (only the NAND node,
which will be fixed in the example and described somewhere else is
kept).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210610082040.2075611-7-miquel.raynal@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Each chil node should have a reg property, no matter the type of
controller (NAND, NOR, SRAM). This should be part of the bindings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210610082040.2075611-5-miquel.raynal@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
This sentence does not belong to this file as this file describes the
bus on which various controllers are wired to.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210610082040.2075611-4-miquel.raynal@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The ranges property is missing in the description while actually used in
the example. This property is actually needed, so mention it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210610082040.2075611-3-miquel.raynal@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Document the device tree bindings of the Renesas RZ/G2L SoC clock
driver in Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210609153230.6967-8-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add DT binding documentation for SYSC controller found on
RZ/G2{L,LC,UL} SoC's.
SYSC block contains the LSI_DEVID register which is used to retrieve
SoC product information.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609163717.3083-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document Renesas SMARC EVK board which are based on RZ/G2L (R9A07G044)
SoC. The SMARC EVK consists of RZ/G2L SoM module and SMARC carrier board,
the SoM module sits on top of carrier board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210609153230.6967-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
ptp_ref clk has been added in DT but not documented which makes yaml
validation failed:
ethernet@5800a000: clocks: [[6, 105], [6, 103], [6, 104], [6, 123],
[6, 169], [6, 112]] is too long
ethernet@5800a000: clock-names: ['stmmaceth', 'mac-clk-tx', 'mac-clk-rx',
'eth-ck', 'ptp_ref', 'ethstp'] is too long
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The recent yaml conversion of the grf and inno-usb2-phy bindings
left the #phy-cells in place in the main usb2phy node inside the
example in grf.yaml, causing new warnings.
Drop it to make the bindingcheck happy.
Fixes: e71ccdff37 ("dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210607141845.3331910-1-heiko@sntech.de
Convert the mtd-physmap binding to DT schema format. The arm-versatile,
cypress,hyperflash and intel,ixp4xx-flash are all just an additional
compatible string, so they are all merged into the main schema.
There doesn't appear to be any users nor support for 'vendor-id' and
'device-id', so these have been dropped.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20210607193500.3085920-1-robh@kernel.org
There are a couple of large cleanup sets in here alongside a number of new
drivers.
Note an immutable branch merged to add a stub for i2c_verify_client()
as needed to avoid a build issue in the fxls8962af driver as a result of a
workaround for a device errata that only applies when i2c interface is used.
Counters
========
New device support
* intel,quadrature encoder peripheral found on Elkhart Lake platforms.
- New driver.
IIO
===
New device support
* amstaos,tsl2591 ambient light sensor.
- New driver + bindings
- Follow up fix to ensure some local variables are suitable for error
handling.
* fsl,fxls8962af + fsl,fxls8964af accelerometers
- New driver + bindings
- Includes an errata work around that cause a build bot failure fixed
by adding a stub to i2c.
* kionix,kxcjk-1013
- Add support for KX023-1025 device. Mostly a different register map
that needed to be supported.
* murata,sca3300 accelerometer
- New driver + bindings
* st,lsm9ds0 IMU
- Rework of st,sensors driver to cleanly support this new glue driver
that enables the two parts of the LSM9DS0.
* ti,tsc2046 touchscreen controller ADC.
- New driver. Intent here is to use this with existing IIO consumer
drivers such as resistive-adc-touch.
- Follow up fix to avoid an issue with unsigned subtraction in error
check.
* ti,tmp117 digital temperature sensor
- New driver + bindings
Features
* adi,ad5755
- Add missing dt-binding doc
* adi,ad7298
- Add ACPI ID used on Intel Galileo Gen 1 boards.
- Add missing dt-binding doc
* adi,ad7476
- Add missing dt-binding doc
* adi,ad7746
- Add missing dt-binding doc for this driver that will hopefully move out
of staging shortly. Update staging driver to use the binding instead of
platform data.
* adi,adis16201 + adis16209
- Add missing dt-binding doc
* adi,adis16480
- Support burst mode for adis16495 and adis16497 parts.
* bosch,bma220
- Add missing dt-binding doc
* fsl,mma7455
- Add missing dt-binding doc
* iio-rescale
- Support handling of processed channels from provider. Some ADCs
require (typically non linear) calibration functions to be applied,
and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be
used as providers to the iio-rescale driver which needs to handle them
somewhat differently from IIO_CHAN_INFO_RAW
* sensiron,sps30
- Support the serial interface. Note this required significant
refactoring of existing driver.
* st,st-sensors
- Add mount matrix support for normal dt-binding whilst continuing to
support the odd ACPI approach for accelerometers.
* ti,dac082s085 + similar
- Add missing dt-binding doc
* trivial-devices - add entries for
- memsic,mx4005, memsic,mx6255 and memsic,mxc6655
- sensortek,stk8312 and sensortek,stk8ba50
Cleanup / minor fixes
* core
- Use devm_add_action_or_reset() to replace boilerplate in several
driver and core IIO devm_* functions.
- Fix an error path issue introduced by above, that could return an
error pointer rather than the expected null from dev_iio_device_alloc()
- Move more IIO internals related fields from struct iio_dev to
struct iio_dev_opaque.
- Drop unused final update of in_loc in demux setup.
* Docs
- Move some docs from driver specific to core dos to avoid replication
of names which the documentation builder does not allow.
Note this means adding a few device specific notes to the general docs
to cover the more unusual uses of the ABI.
- ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we
have the bufferX/* variant. Not we are not getting rid of these
interfaces, just encouraging new code to use the new interface.
* IIO wide:
- Tidy up new cases of dev.parent etc being set in drivers as the core
now does it.
- Fix more cases of possible miss-aligned buffers when passed to
iio_push_to_buffers_with_timestamp(). Note we only have one known
instance of anyone seeing this bug actually happening, so this has been
a low priority cleanup effort for several cycles.
- sysfs_emit() used in more drivers.
- Runtime pm tidy up and use of pm_runtime_resume_and_get()
- Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires
that the timestamp when inserted by naturally aligned + consumers can
assume that all fields are naturally aligned. Part of a long running
effort, with at least 2 more series to come tackling additional
variants.
- Stop specifying "mount-matrix" property name in every lookup of the
mount matrix from firmware by hard coding it in the core.
* adi,ad7476
- Handle the variety of different regulators used by the parts supported
by this driver (came up in dt-binding review)
* adi,ad7746
- Trivial drop of if (ret) return ret; return 0; pattern
- Tidy up comments
- Pull capdac setup out to own function.
* adi,ad7766
- Trivial drop of if (ret) return ret; return 0; pattern
* adi,adis
- Avoid returning error codes in interrupt handlers.
- Handle a failure in spi_write in the trigger handler.
- Rework to add updating of device page after changing it.
- Don't push data to IIO buffers when read failed.
- Add configuration of burst max speed to core avoid handling this in
each driver.
- Use the adis_dev_lock() helper in adis16260 and adis16136 drivers.
- Excessive includes cleanup via include-what-you-use static checker
after zero day highlighted that these needed updating.
* afe
- Amend binding to add #io-channel-cells, thus allowing this IIO
consumer to also be an IIO provider.
* aosong,am2315
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* bosch,bma180
- Adding missing bandwidth settings (500, 1000 Hz)
* bosch,bme680
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* ep93xx_adc,
- Drop a redundant error print.
* maxim,max118
- Convert remainder of probe() to devm_ managed functions.
- Avoid some repeated jumping back and forth between iio_dev and
spi structures.
* maxim,max11100
- Use get_unaligned_be16() instead of open coding.
- Convert remainder of probe() to devm_ managed functions.
* samsung,exynos_adc
- Unused error value dropped.
* sensiron,sgp30
- Drop use of %hx in favor of %x and letting the normal type conversion
work.
* sensortek,stk8312
- Add lowercase device id and note uppercase version deprecated.
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* sprx,sc72xx_adc
- add MODULE_DEVICE_TABLE
* st,lsm6dsx
- Fix docs of valid ODRs
* st,sensors
- dt-binding rework. Two efforts on this crossed in a previous cycle
so this update cherry picks the best of the two yaml conversions.
- Don't copy the channel spec array as now ext_info is no longer modified.
* st,stm32-adc
- tidy up some docs that were marked as kernel-doc but aren't.
* ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626
- Convert remainder of probe() functions to devm_ managed functions
to simplify error handing and remove paths.
-----BEGIN PGP SIGNATURE-----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=Zved
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
1st set of new IIO/counter device support, features and cleanup for 5.14
There are a couple of large cleanup sets in here alongside a number of new
drivers.
Note an immutable branch merged to add a stub for i2c_verify_client()
as needed to avoid a build issue in the fxls8962af driver as a result of a
workaround for a device errata that only applies when i2c interface is used.
Counters
========
New device support
* intel,quadrature encoder peripheral found on Elkhart Lake platforms.
- New driver.
IIO
===
New device support
* amstaos,tsl2591 ambient light sensor.
- New driver + bindings
- Follow up fix to ensure some local variables are suitable for error
handling.
* fsl,fxls8962af + fsl,fxls8964af accelerometers
- New driver + bindings
- Includes an errata work around that cause a build bot failure fixed
by adding a stub to i2c.
* kionix,kxcjk-1013
- Add support for KX023-1025 device. Mostly a different register map
that needed to be supported.
* murata,sca3300 accelerometer
- New driver + bindings
* st,lsm9ds0 IMU
- Rework of st,sensors driver to cleanly support this new glue driver
that enables the two parts of the LSM9DS0.
* ti,tsc2046 touchscreen controller ADC.
- New driver. Intent here is to use this with existing IIO consumer
drivers such as resistive-adc-touch.
- Follow up fix to avoid an issue with unsigned subtraction in error
check.
* ti,tmp117 digital temperature sensor
- New driver + bindings
Features
* adi,ad5755
- Add missing dt-binding doc
* adi,ad7298
- Add ACPI ID used on Intel Galileo Gen 1 boards.
- Add missing dt-binding doc
* adi,ad7476
- Add missing dt-binding doc
* adi,ad7746
- Add missing dt-binding doc for this driver that will hopefully move out
of staging shortly. Update staging driver to use the binding instead of
platform data.
* adi,adis16201 + adis16209
- Add missing dt-binding doc
* adi,adis16480
- Support burst mode for adis16495 and adis16497 parts.
* bosch,bma220
- Add missing dt-binding doc
* fsl,mma7455
- Add missing dt-binding doc
* iio-rescale
- Support handling of processed channels from provider. Some ADCs
require (typically non linear) calibration functions to be applied,
and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be
used as providers to the iio-rescale driver which needs to handle them
somewhat differently from IIO_CHAN_INFO_RAW
* sensiron,sps30
- Support the serial interface. Note this required significant
refactoring of existing driver.
* st,st-sensors
- Add mount matrix support for normal dt-binding whilst continuing to
support the odd ACPI approach for accelerometers.
* ti,dac082s085 + similar
- Add missing dt-binding doc
* trivial-devices - add entries for
- memsic,mx4005, memsic,mx6255 and memsic,mxc6655
- sensortek,stk8312 and sensortek,stk8ba50
Cleanup / minor fixes
* core
- Use devm_add_action_or_reset() to replace boilerplate in several
driver and core IIO devm_* functions.
- Fix an error path issue introduced by above, that could return an
error pointer rather than the expected null from dev_iio_device_alloc()
- Move more IIO internals related fields from struct iio_dev to
struct iio_dev_opaque.
- Drop unused final update of in_loc in demux setup.
* Docs
- Move some docs from driver specific to core dos to avoid replication
of names which the documentation builder does not allow.
Note this means adding a few device specific notes to the general docs
to cover the more unusual uses of the ABI.
- ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we
have the bufferX/* variant. Not we are not getting rid of these
interfaces, just encouraging new code to use the new interface.
* IIO wide:
- Tidy up new cases of dev.parent etc being set in drivers as the core
now does it.
- Fix more cases of possible miss-aligned buffers when passed to
iio_push_to_buffers_with_timestamp(). Note we only have one known
instance of anyone seeing this bug actually happening, so this has been
a low priority cleanup effort for several cycles.
- sysfs_emit() used in more drivers.
- Runtime pm tidy up and use of pm_runtime_resume_and_get()
- Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires
that the timestamp when inserted by naturally aligned + consumers can
assume that all fields are naturally aligned. Part of a long running
effort, with at least 2 more series to come tackling additional
variants.
- Stop specifying "mount-matrix" property name in every lookup of the
mount matrix from firmware by hard coding it in the core.
* adi,ad7476
- Handle the variety of different regulators used by the parts supported
by this driver (came up in dt-binding review)
* adi,ad7746
- Trivial drop of if (ret) return ret; return 0; pattern
- Tidy up comments
- Pull capdac setup out to own function.
* adi,ad7766
- Trivial drop of if (ret) return ret; return 0; pattern
* adi,adis
- Avoid returning error codes in interrupt handlers.
- Handle a failure in spi_write in the trigger handler.
- Rework to add updating of device page after changing it.
- Don't push data to IIO buffers when read failed.
- Add configuration of burst max speed to core avoid handling this in
each driver.
- Use the adis_dev_lock() helper in adis16260 and adis16136 drivers.
- Excessive includes cleanup via include-what-you-use static checker
after zero day highlighted that these needed updating.
* afe
- Amend binding to add #io-channel-cells, thus allowing this IIO
consumer to also be an IIO provider.
* aosong,am2315
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* bosch,bma180
- Adding missing bandwidth settings (500, 1000 Hz)
* bosch,bme680
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* ep93xx_adc,
- Drop a redundant error print.
* maxim,max118
- Convert remainder of probe() to devm_ managed functions.
- Avoid some repeated jumping back and forth between iio_dev and
spi structures.
* maxim,max11100
- Use get_unaligned_be16() instead of open coding.
- Convert remainder of probe() to devm_ managed functions.
* samsung,exynos_adc
- Unused error value dropped.
* sensiron,sgp30
- Drop use of %hx in favor of %x and letting the normal type conversion
work.
* sensortek,stk8312
- Add lowercase device id and note uppercase version deprecated.
- Drop ACPI id. Unlikely this one is in the wild and it isn't valid
ACPI naming.
* sprx,sc72xx_adc
- add MODULE_DEVICE_TABLE
* st,lsm6dsx
- Fix docs of valid ODRs
* st,sensors
- dt-binding rework. Two efforts on this crossed in a previous cycle
so this update cherry picks the best of the two yaml conversions.
- Don't copy the channel spec array as now ext_info is no longer modified.
* st,stm32-adc
- tidy up some docs that were marked as kernel-doc but aren't.
* ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626
- Convert remainder of probe() functions to devm_ managed functions
to simplify error handing and remove paths.
* tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (171 commits)
i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
iio: adis: Cleanout unused headers
iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth
counter: Add support for Intel Quadrature Encoder Peripheral
staging: iio: cdc: ad7746: extract capac setup to own function
staging: iio: cdc: ad7746: clean up probe return
staging: iio: cdc: ad7746: remove ordinary comments
iio: adc: ti-adc161s626: Use devm managed functions for all of probe.
iio: adc: ti-adc108s102: Use devm managed functions for all of probe()
iio: adc: ti-adc0832: Use devm managed functions for all of probe()
iio: adc: ti-adc081c: Use devm managed functions for all of probe()
iio: adc: max1118: Avoid jumping back and forth between spi and iio structures
iio: adc: max1118: Use devm_ managed functions for all of probe
iio: adc: max11100: Use devm_ functions for rest of probe()
iio: adc: max11100: Use get_unaligned_be16() rather than opencoding.
iio: chemical: sgp30: Drop use of %hx in format string.
iio: gyro: st_gyro: Support mount matrix
iio: magnetometer: st_magn: Support mount matrix
iio: accel: st_sensors: Stop copying channels
iio: accel: st_sensors: Support generic mounting matrix
...
Add compatible for the second version of IOMMU hardware block.
RK356x IOMMU can also be link to a power domain.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-3-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
dt_binding_check reports the below error with the latest schema:
Documentation/devicetree/bindings/media/renesas,drif.yaml:
properties:clock-names:maxItems: False schema does not allow 1
Documentation/devicetree/bindings/media/renesas,drif.yaml:
ignoring, error in schema: properties: clock-names: maxItems
This patch fixes the problem.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210408202436.3706-1-fabrizio.castro.jz@renesas.com
The PL031 RTC binding has been in use for a long time, but never got
documented. Fortunately, it's simple and existing users are consistent.
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: linux-rtc@vger.kernel.org
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210607193718.3090202-1-robh@kernel.org/
DT bindings for enabling and adjusting spread spectrum clocking have
been added.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210606202253.31649-3-dariobin@libero.it
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There are 4 variations of the SJA1110 switch which have a different set
of MII protocols supported per port. Document the compatible strings.
Also, the SJA1110 optionally supports 2 internal MDIO buses for 2
different types of Ethernet PHYs. Document a container node called
"mdios" which has 2 subnodes "mdio@0" and "mdio@1", identifiable via
compatible string, under which the driver finds the internal PHYs.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A collection of fixes and device ID updates that have come up in the
past few -rcs, none of which stand out particularly.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmC/aSwACgkQJNaLcl1U
h9DNXAf+O+fzbVOkXxp/r3yUa2VF0Zdit0R8xIcUh0k7vd+MqYECaGaKqX9sAKbn
nQFNvzcdRjkiFFgmKpy6x2kJ/OXBJbRCvC5FfAAj2cJvzw4eN03wkqaa9JuEZX1e
uJ+Ny1PELMglHqmWNC9bWnudEJoaYxpssI14u+FjOWJPzIxXSxWSGQknIG4d8/Rh
BtifoTxWxsYIbKiiNhX6Ui5zdzRl5CeTLuKoKXBQRM0ivRwPuX0Y+VW/tsNiLUBT
yN/CEEuu+GZevdHRvWEW3FwK8y7W36gueEYe7o+SFQVgyyjESnhCRdhRvo7uvzrx
e1yVEe4ky0wbyhmBR+69SugYKqd1/A==
=tHOl
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.13-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.13
A collection of fixes and device ID updates that have come up in the
past few -rcs, none of which stand out particularly.
This is an NEC remote control device shipped with some Toshiba TVs.
Signed-off-by: Alexander Voronov <avv.0@ya.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add bindings for the Microchip eXtended Image Sensor Controller.
Based on the atmel,isc.yaml binding.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Convert the Atmel ISC to yaml binding format.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
On ARM systems, some platform devices behind an IOMMU may support stall,
which is the ability to recover from page faults. Let the firmware tell us
when a device supports stall.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210526161927.24268-2-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Add DT binding document for TI SN65DSI83 and SN65DSI84 DSI to LVDS bridge.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607174258.16300-1-marex@denx.de
Since the sja1105 driver no longer has any custom device tree
properties, the conversion is trivial.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that both RevMII as well as RevRMII exist, we can deprecate the
sja1105,role-mac and sja1105,role-phy properties and simply let the user
select that a port operates in MII PHY role by using
phy-mode = "rev-mii";
or in RMII PHY role by using
phy-mode = "rev-rmii";
There are no fixed-link MII or RMII properties in mainline device trees,
and the setup itself is fairly uncommon, so there shouldn't be risks of
breaking compatibility.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "reverse RMII" protocol name is a personal invention, derived from
"reverse MII".
Just like MII, RMII is an asymmetric protocol in that a PHY behaves
differently than a MAC. In the case of RMII, for example:
- the 50 MHz clock signals are either driven by the MAC or by an
external oscillator (but never by the PHY).
- the PHY can transmit extra in-band control symbols via RXD[1:0] which
the MAC is supposed to understand, but a PHY isn't.
The "reverse MII" protocol is not standardized either, except for this
web document:
https://www.eetimes.com/reverse-media-independent-interface-revmii-block-architecture/#
In short, it means that the Ethernet controller speaks the 4-bit data
parallel protocol from the perspective of a PHY (it acts like a PHY).
This might mean that it implements clause 22 compatible registers,
although that is optional - the important bit is that its pins can be
connected to an MII MAC and it will 'just work'.
In this discussion thread:
https://lore.kernel.org/netdev/20210201214515.cx6ivvme2tlquge2@skbuf/
we agreed that it would be an abuse of terms to use the "RevMII" name
for anything than the 4-bit parallel MII protocol. But since all the
same concepts can be applied to the 2-bit Reduced MII protocol as well,
here we are introducing a "Reverse RMII" protocol. This means: "behave
like an RMII PHY".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document support for the Interrupt Controller for External Devices
(INT-EC) in the Renesas R-Car M3-W+ (r8a77961) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/55d2c30cb14b2e10193a7fd4aa7670c70f360037.1622546880.git.geert+renesas@glider.be
Correct the order of the descriptions for the "interrupts" property to
match the order of the "interrupt-names" property.
Fixes: 68989fe1c3 ("dt-bindings: usb: Convert cdns-usb3.txt to YAML schema")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Acked-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20210527193952.1705127-1-geert@linux-m68k.org
Signed-off-by: Rob Herring <robh@kernel.org>
Currently the example provided in arm,mhuv2 schema complains as below:
Documentation/devicetree/bindings/mailbox/arm,mhuv2.example.dt.yaml :0:0:
/example-0/soc/scb@2e000000: failed to match any schema with compatible:
['fujitsu,mb86s70-scb-1.0']
Fix it by using an example with a matching schema that makes use of 4
mailboxes that is well suited to demonstrate Rx and Tx channels with both
doorbell and data transfer protocols.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210604205710.1944363-7-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Currently the example provided in arm,mhu schema complains as below:
Documentation/devicetree/bindings/mailbox/arm,mhu.example.dt.yaml :0:0:
/example-0/soc/scb@2e000000: failed to match any schema with compatible:
['fujitsu,mb86s70-scb-1.0']
Fix the same using examples based on Juno platform. The old SCPI firmware
used MHU with standard 32-bit data transfer protocol while the new SCMI
firmware uses MHU and expects to be used in doorbell mode. Update example
with SCPI and SCMI firmware nodes to demonstrate both 32-bit data transfer
and doorbell mode of MHU operations
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210604205710.1944363-6-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the old text format binding for System Control and Management Interface
(SCMI) Message Protocol into the new and shiny YAML format.
Cc: Cristian Marussi <cristian.marussi@arm.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jim Quinlan <jim2101024@gmail.com>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Peter Hilber <peter.hilber@opensynergy.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210604205710.1944363-5-sudeep.holla@arm.com
[robh: Rework interrupts schema and if/then]
Signed-off-by: Rob Herring <robh@kernel.org>
Convert/merge the existing text format SCPI binding additions for
amlogic,scpi into the common arm,scpi json scheme.
Couple of things to note:
"amlogic,meson-gxbb-scpi" is always used with "arm,scpi-pre-1.0" and
"amlogic,meson-gxbb-scpi-sensors" is used always with "arm,scpi-sensors"
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210604205710.1944363-4-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the old text format binding for System Control and Power Interface
(SCPI) Message Protocol into the new and shiny YAML format.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210604205710.1944363-3-sudeep.holla@arm.com
[robh: Move fixed strings to 'properties', drop some literal block notations]
Signed-off-by: Rob Herring <robh@kernel.org>
Once the arm,scpi binding is converted to YAML format, the following
errors will be seen when doing `make DT_CHECKER_FLAGS=-m dt_binding_check`
From schema: Documentation/devicetree/bindings/firmware/arm,scpi.yaml
Documentation/devicetree/bindings/mailbox/arm,mhu.example.dt.yaml:
scpi@2f000000: $nodename:0: 'scpi' was expected
Documentation/devicetree/bindings/mailbox/arm,mhu.example.dt.yaml:
scpi@2f000000: reg: [[0, 788529152, 0, 512]] is not of type 'object'
Documentation/devicetree/bindings/mailbox/arm,mhu.example.dt.yaml:
scpi@2f000000: 'shmem' is a required property
Fix those error following the SCPI bindings.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210604205710.1944363-2-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
The "reset-active-low" property was removed from the ssd1307fb bindings
in commit 519b4dba58 ("fbdev: ssd1307fb: Remove reset-active-low
from the DT binding document") and from the ssd1307fb binding examples
in commit 7d7e58d30e ("dt-bindings: display: ssd1307fb: Remove
reset-active-low from examples").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Convert i2c-omap.txt to YAML schema for better checks and documentation.
Following properties were used in DT but were not documented in txt
bindings and has been included in YAML schema:
1. Include ti,am4372-i2c compatible
2. Document clocks property
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add bindings required for Multi Button Headset detection.
WCD934x support Headsets with upto 8 buttons including, impedance measurement
on both L/R Headset speakers and cross connection detection.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210604115230.23259-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The SCL gpio pin used by I2C bus for recovery needs to be configured as
open drain, so fix the binding example accordingly.
In relation with fix c5a2838025 ("ARM: dts: at91: Configure I2C SCL
gpio as open drain").
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 19e5cef058 ("dt-bindings: i2c: at91: document optional bus recovery properties")
In order to optimize serial communication (performance/throughput VS
latency), we may need to tweak DMA period number and size. This adds
DT properties to configure those values before initialising DMA.
The defaults will stay the same as before.
[update documentation and commit message, rebase to current master,
switch back to DT instead of sysfs]
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210430175038.103226-2-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the driver the interrupts are fetched by name. Therefore, add
interrupt names in the list of required properties
Fixes: 68989fe1c3 ("dt-bindings: usb: Convert cdns-usb3.txt to YAML schema")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210528060657.29100-1-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RT5033 PMIC provides a simple fuel gauge via I2C.
Add a DT schema to describe how to set it up in the device tree.
Note that although RT5033 is a MFD with lots of functionality
(also charger, regulator, LEDs, ...) the fuel gauge has a separate
I2C bus and is not part of the MFD.
Cc: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Interrupt line can be configured on different hardware in different way,
even inverted. Therefore driver should not enforce specific trigger
type - edge falling - but instead rely on Devicetree to configure it.
The Maxim 14577/77836 datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU therefore the edge
falling is not correct.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Iskren Chernev <iskren.chernev@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add compatible string for AM64 SoC in device tree binding.
EPWM IP in AM64 does not support High resolution, so named epwm instead
of ehrpwm in compatible. However IP is till compatible with features
supported by driver with ti,am3352-ehrpwm compatible.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Convert the tiehrpwm binding to DT schema format using json-schema.
Along with this conversion the following changes are included:
- 'clock' and 'clock-names' properties are marked as required as
driver fails to probe without these properties
- Dropped ti,am33xx-ehrpwm as it is no longer applicable.
- 'power-domains' property is introduced and marked as optional.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add the VDO definition for USB PD rev 2.0 in the bindings and define a
new property snk-vdos-v1 containing legacy VDOs as the responses to the
port partner which only supports PD rev 2.0.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210601123151.3441914-3-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the cpu type of cpu2 and cpu3 since MT8173 used Cortex-a72.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Seiya Wang <seiya.wang@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Convert the imx-audmux binding to DT schema format using json-schema
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210531064752.8809-1-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a fair amount of warnings when running 'make dtbs_check' with
amlogic,gx-sound-card.yaml.
Ex:
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:1: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:2: missing phandle tag in 0
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0: [66, 0, 0] is too long
The reason is that the sound-dai phandle provided has cells, and in such
case the schema should use 'phandle-array' instead of 'phandle'.
Fixes: fd00366b8e ("ASoC: meson: gx: add sound card dt-binding documentation")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210524093448.357140-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds device tree bindings for the ixp4xx crypto engine.
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Correct the order of the descriptions for the "interrupts" property to
match the order of the "interrupt-names" property.
Fixes: 68989fe1c3 ("dt-bindings: usb: Convert cdns-usb3.txt to YAML schema")
Acked-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210527193952.1705127-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RK3308 has a USB GRF.
This patch adds a compatible string for it.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210601164800.7670-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications. Remove unneeded "#phy-cells" from parent node.
Also sort example.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210601164800.7670-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
"amlogic,meson-gxbb-scp-shmem" is already in the Generic on-chip SRAM
binding though "amlogic,meson-gxbb-scpi" is missing which is now added.
Also remove the whole old text format binding for the same.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210601224904.917990-5-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Commit a90b15e0ad ("Documentation: bindings: decouple juno specific
details from generic binding") moved the juno specific bindings into
separate file. Though there was no need for juno specific binding, it
has been used unfortunately for whatever stupid reason I added it for.
Let us move the same to the generic sram.yaml schema and remove the
old text format binding.
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210601224904.917990-4-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Move the SRAM and shared memory binding for SCMI into the existing
Generic on-chip SRAM. We just need to update the compatible list and
there-by remove the whole old text format binding for the same.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210601224904.917990-3-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Move the SRAM and shared memory binding for SCPI into the existing
Generic on-chip SRAM. We just need to update the compatible list and
there-by remove the whole old text format binding for the same.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20210601224904.917990-2-sudeep.holla@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the current OMAP Mailbox binding from text format to YAML
format/DT schema, and delete the legacy text binding file.
The new YAML binding conversion is an updated version compared to
the original. The descriptions for certain properties have been
improved to provide more clarity. Constraints are added to the
properties 'ti,mbox-num-users', 'ti,mbox-num-fifos' and 'interrupts'.
The 'ti,hwmods' is a legacy property and is retained only to reflect
the existing usage on some older OMAP2 and OMAP3 platforms.
All the existing examples have also been updated to reflect the
latest dts nodes (ti,hwmods removed from OMAP4 and AM33xx examples,
and interrupts value updated for AM65x SoCs).
Signed-off-by: Suman Anna <s-anna@ti.com>
[robh: Update ref in ti,omap-remoteproc.yaml]
Link: https://lore.kernel.org/r/20210520234348.4479-1-s-anna@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
The check for the board compatible should be limited only to the root
node. Any other nodes with such compatible are not part of this schema
and should not match.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Link: https://lore.kernel.org/r/20210526162750.135139-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the common MDIO mux bindings to DT schema.
Drop the example from mdio-mux.yaml as mdio-mux-gpio.yaml has the same one.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210526181411.2888516-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Straight conversion of the txt file using the mux-consumer.yaml
binding now that is available.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Peter Rosin <peda@axentia.se>
[robh: Drop quotes and $ref for mux-controls]
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210522112908.1611389-3-jic23@kernel.org
Add the compatible string for M3-W+ (r8a77961) to the list of supported
SoCs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the compatible string for M3-W+ (r8a77961) to the list of supported
SoCs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add documentation for the devicetree bindings of the RDA5807 FM radio
I2C chip from Unisoc.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Document support for the VIN module in the Renesas V3U (r8a779a0) SoC.
The V3U is different from other SoCs as it have 32 instead of 8 (most of
Gen3) or 16 (V3H) VIN instances. The VIN instances are also connected to
a new IP the R-Car ISP Channel Selector.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add bindings for Renesas R-Car ISP Channel Selector IP. The ISP is
responsible for filtering the MIPI CSI-2 bus and directing the different
CSI-2 virtual channels to different R-Car VIN instances (DMA engines)
for capture.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
address-cells and size-cells can't be declared as "required" properties
as they are not needed if subnodes don't have a "reg" entry.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add support for pm8350c, pmk8350, pm7325 and pmr735a PMICS.
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add bindings for the Qualcomm Technologies, Inc. PM8008 MFD driver.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This driver was merged in the early days of device tree
on Arm in 2012 and somehow we failed to provide bindings
for it. Fix it up with some YAML bindings.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Adds DT binding document for Richtek RT4831.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Adds DT binding document for Richtek RT4831 backlight.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This is for ChromeOS tablets which have a 'cros_cbas' switch device
in the "Whiskers" base board. This device can be instantiated only by
device tree on ARM platforms. ChromeOS EC doesn't provide a way to
probe the device.
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
-----BEGIN PGP SIGNATURE-----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=bG7Q
-----END PGP SIGNATURE-----
mergetag object 5258f7eed4
type commit
tag tb-mfd-gpio-regulator-v5.14
tagger Lee Jones <lee.jones@linaro.org> 1621427664 +0100
Immutable branch between MFD, GPIO and Regulator due for the v5.14 merge window
-----BEGIN PGP SIGNATURE-----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=j0mE
-----END PGP SIGNATURE-----
mergetag object 4cfc965475
type commit
tag tb-mfd-regulator-rtc-v5.14
tagger Lee Jones <lee.jones@linaro.org> 1622562292 +0100
Immutable branch between MFD, Regulator and RTC due for the v5.14 merge window
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmC2VfQACgkQUa+KL4f8
d2HW9BAAtNvDUH5JvV/thmAmHBGXTrK5XuqMgnx2q/ReCMpW1sUgJJ+W81YJ4uKW
qxNU7QknXgv/YGVZwU6U2w1ikpr0LjUr95pIxMnA91Jr+GlirbtuuqjqK/cjwvnp
ENecwhYdVb1tDsTUsAxcpYqgw2zO+/e7jJW63hhTTmTgXhWZDRmTzcpvtLKfyZa+
4qnmpZmIS2qAwcc0H3gvZoj+EeRR/ljlH1hOGHzSQop/dHgYpSsmNHDARZ18gmJs
F6OZJqtVlEbdt9TzWwmWUIWvTeKw/i9bQHSxreSgJho0TQryfeGUO+5wbrTikg5f
QBL9BPblBvuVNT5lydzq37z4AMY/yK6MqR0MhU8AISuz55so0/g+7xDwkwjRNRXa
plxzoxNv7br7Xp5q1WF/P5UGCSceVjf4AsFgaJYt0q6IJF/RBiBsFyoCDm+5Kue9
0oeXD8S3Z35A5dON12wFH8SZWeG4LdUYPHdo6JBWOpKx+WhAa5CaUoCzoiYKVEzE
RUwJqVnKuHWTNc3A2BUYSk6hhBpNNiuLLyZpn6hLQ7cNeJ2ZNdEDvW09KRqBhM2F
e3Eo4pFj7a4o6CDjBtNbH9HnxURMcNZ3GnpOrlz+b2l7msLPCIonnlOKW9e9fs3F
ZYQmioy00EL8ZCwNX/XqJMqe4HIMnjh4b46Pl+2MFeBoOST0zPc=
=pL6Z
-----END PGP SIGNATURE-----
Merge tags 'tb-mfd-asoc-v5.14-1', 'tb-mfd-gpio-regulator-v5.14' and 'tb-mfd-regulator-rtc-v5.14' into ibs-for-mfd-merged
Immutable branch between MFD and ASoC due for the v5.14 merge window
Immutable branch between MFD, GPIO and Regulator due for the v5.14 merge window
Immutable branch between MFD, Regulator and RTC due for the v5.14 merge window
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmC0CoEeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG8qYH/0bJOUUsj4fsBHY+
1fSTcbEZYxrdO6nYOzk34UZBeC7rGdhpFFVCU0fh/il8ec3K8pU9ypZykhvpFwGD
cY0zrfaNiEcsIinYZh/tMyfPK3JMqGrcOkKqYli5kSfW9BR0YzHBeiETcHMyZfMu
a8uI9nNYIZda0hwrXMbMNaFMH4Nif3kXwDxNNrx1THaTYifVZK+IwlM8TpcSPIK/
eNbU+5G/VBiQ9YE4PZyXVbsWMZcJ9NDRanx6aKMYTlwSDytxmd5HlURKJcfOiXnQ
AQq9VYbkkuw6FhBPnWvkYVJj1UwkySXjXyZkTiIH8iIMpJ406rWrQgIaQPI3o/98
iVDfH9k=
=t88B
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc4' into media_tree
Linux 5.13-rc4
* tag 'v5.13-rc4': (976 commits)
Linux 5.13-rc4
seccomp: Refactor notification handler to prepare for new semantics
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
Documentation: seccomp: Fix user notification documentation
MAINTAINERS: adjust to removing i2c designware platform data
perf vendor events powerpc: Fix eventcode of power10 JSON events
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
perf stat: Fix error check for bpf_program__attach
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
...
Add the dt-binding for the RPM Clock Controller on the MSM8226 SoC.
Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Link: https://lore.kernel.org/r/20210502122027.9351-4-bartosz.dudziak@snejp.pl
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The display clock controller in SC8180x is reused from SM8150, so add
the necessary compatible and wire up the driver to enable this.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210511041719.591969-1-bjorn.andersson@linaro.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add power key and resin compatible strings for the PMK8350 PMIC.
These are needed to distinguish key PON_HLOS register differences
between PMK8350 and previous PMIC PON modules.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1620630064-16354-3-git-send-email-skakit@codeaurora.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
At the moment, the edt-ft5x06 driver can control a single regulator
("vcc"). However, some FocalTech touch controllers have an additional
IOVCC pin that should be supplied with the digital I/O voltage.
The I/O voltage might be provided by another regulator that should also
be kept on. Otherwise, the touchscreen can randomly stop functioning if
the regulator is turned off because no other components still require it.
Document (optional) support for controlling the regulator for IOVCC
using "iovcc-supply".
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210510193108.50178-1-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use the i2c-mux.yaml schema in the maxim,max9286 binding schema. With this,
several properties can be dropped as they are defined in i2c-mux.yaml
already.
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210526184839.2937899-7-robh@kernel.org
Convert the i2c-mux-pca954x binding to DT schema format.
Add the missing compatible for 'nxp,pca9645' which is already in use.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210526184839.2937899-6-robh@kernel.org
As some of the example I2C devices don't have schemas yet, change them to
ones that do.
Cc: Peter Rosin <peda@axentia.se>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210526184839.2937899-5-robh@kernel.org
Convert the mux controller bindings to DT schema.
Cc: Peter Rosin <peda@axentia.se>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210526184839.2937899-4-robh@kernel.org
Convert the Philips PCF8563/Epson RTC8564 binding to DT schema format.
Add 'interrupts' and 'wakeup-source' as this device has an interrupt
which was not documented, but in use. Add 'start-year' as well.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210526184839.2937899-3-robh@kernel.org
The ti,j721e-system-controller binding does not follow the standard mux
controller node name 'mux-controller' and the example is incomplete. Fix
these to avoid schema errors before the mux controller binding is
converted to schema.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210526184839.2937899-2-robh@kernel.org
Add i.MX7ULP compatible.
We use i.MX7ULP dual mode and in which case i.MX7ULP A7 core runs under
control of M4 core, M4 core starts by ROM and powers most services used
by A7 core, so A7 core has no power to start and stop M4 core. So
clocks and syscon are not required.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1620274123-1461-3-git-send-email-peng.fan@oss.nxp.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
add dt-binding document for MediaTek MT6359 PMIC
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This adds compatible for the MediaTek MT6359 PMIC.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Create dt-binding documentation to document rk817 codec.
New property name of rockchip,mic-in-differential added to control if
the microphone is in differential mode or not.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
All NVIDIA Tegra SoCs have a core power domain where majority of hardware
blocks reside. Document the new core power domain properties.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the dt-binding for the rpm on the Qualcomm MSM8226 SoC platform.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Link: https://lore.kernel.org/r/20210502122027.9351-2-bartosz.dudziak@snejp.pl
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Document the google,senor board based on sc7280 SoC
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/1619674827-26650-1-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Current dts files with 'grf' nodes are manually verified.
In order to automate this process grf.txt has to be
converted to YAML.
Most compatibility strings are in use with "simple-mfd" added.
Changed compatibles:
"rockchip,rk3066-grf", "syscon", "simple-mfd"
"rockchip,rk3188-grf", "syscon", "simple-mfd"
Add description already in use:
"rockchip,rv1108-pmugrf", "syscon"
Add new descriptions for:
"rockchip,rk3568-grf", "syscon", "simple-mfd"
"rockchip,rk3568-pmugrf", "syscon", "simple-mfd"
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210512122346.9463-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Current dts files with Rockchip 'usbphy' nodes are manually verified.
In order to automate this process rockchip-usb-phy.txt has to be
converted to YAML.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210518165658.12764-2-jbx6244@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The RK3308 features a slightly different USB phy than other Rockchip SoCs.
This patch adds a compatible string for it.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210514150044.2099298-2-t.schramm@manjaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch adds vbus-supply optional property to phy sub-nodes using
connector node.
A regulator for USB VBUS may be needed for host mode.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20210517120821.26466-2-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull i2c fixes from Wolfram Sang:
"This is a bit larger than usual at rc4 time. The reason is due to
Lee's work of fixing newly reported build warnings.
The rest is fixes as usual"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (22 commits)
MAINTAINERS: adjust to removing i2c designware platform data
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
i2c: busses: i2c-st: Fix copy/paste function misnaming issues
i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure
i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param
i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'
i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'
i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc
i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers
i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
i2c: I2C_HISI should depend on ACPI
...
Add vbus-supply property for mt65xx. The regulator can be passed into
core and turned off during suspend/sleep to reduce power consumption.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Convert the Renesas RZ/A I2C Bus Interface (RIIC) Device Tree binding
documentation to json-schema.
Document missing properties.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Convert the Renesas EMMA Mobile EV2 IIC Interface (IIC) Device Tree
binding documentation to json-schema.
Document missing properties.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Convert the Renesas R-Car I2C Controller Device Tree binding
documentation to json-schema.
Document missing properties.
Make the clocks property required.
DMA is supported on R-Car Gen3 and RZ/G2 only.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The compatible value "renesas,i2c-rcar" was deprecated in commit
ad4a8dc3fe ("i2c: rcar: Add per-Generation fallback bindings"),
and never had any users in upstream Linux. Drop its description from
the DT bindings.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The K3 AM64x SoCs have two dual-core Arm R5F clusters/subsystems, with
2 R5F cores each, both in the MAIN voltage domain.
These clusters are a revised IP version compared to those present on
J721E and J7200 SoCs, and supports a new "Single-CPU" mode instead of
LockStep mode. Update the K3 R5F remoteproc bindings with the compatible
info relevant to these R5F clusters/subsystems on K3 AM64x SoCs.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210327143117.1840-2-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
AST2600 has 2 SGPIO master interfaces one with 128 pins and another one
has 80 pins. It also supports 2 SGPIO slave interfaces.
In the current bindings, there are only SGPM1 and SGPS1 defined in enum,
SGPM2 and SGPS2 should also be added in the bindings.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210525055308.31069-2-steven_lee@aspeedtech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmCvTYUTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqTxPB/4xVeasYKcyinylU7adBp9HFIvKjOiK
TpxQ7h4EhjJxkmQyONP529ZeQ5sjbnbc9IGkDQNhhVVm764LnEJ01aIi+kMtRs+M
szAGbWcITSyv4iaYCcKtNDSi2m74TK4gtRhsKItkIBRAZCs5jb54DSjWae7cGH0A
M/ts6WbYTbp89Lmww3mYtQ4dpmqvk/gXNbzKicrs2uGbPg0YTyq8rAQztt4yFaQR
9cBzxnwcfgvTz/uihkItiClv7kZIYjwzFB8BO1S2qx0TaUE1n78uiuuzcIdfvPt8
TKap7pwnjLYYToHokcWaU2t8Nd1Hy3KCaHuYO54TdXM4KYODJmbPydER
=pVNd
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.14-20210527' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
can-next 2021-05-27
The first 2 patches are by Geert Uytterhoeven and convert the rcan_can
and rcan_canfd device tree bindings to yaml.
The next 2 patches are by Oliver Hartkopp and me and update the CAN
uapi headers.
zuoqilin's patch removes an unnecessary variable from the CAN proc
code.
Patrick Menschel contributes 3 patches for CAN ISOTP to enhance the
error messages.
Jiapeng Chong's patch removes two dead stores from the softing driver.
The next 4 patches are by me and silence several warnings found by
clang compiler.
Jimmy Assarsson's patches for the kvaser_usb driver add support for
the Kvaser hydra devices.
Dario Binacchi provides 2 patches for the c_can driver, first removing
an unused variable, then adding basic ethtool support to query driver
and ring parameter info.
The last 4 patches are by Torin Cooper-Bennun and clean up the m_can
driver.
* tag 'linux-can-next-for-5.14-20210527' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (21 commits)
can: m_can: fix whitespace in a few comments
can: m_can: make TXESC, RXESC config more explicit
can: m_can: clean up CCCR reg defs, order by revs
can: m_can: use bits.h macros for all regmasks
can: c_can: add ethtool support
can: c_can: remove unused variable struct c_can_priv::rxmasked
can: kvaser_usb: Add new Kvaser hydra devices
can: kvaser_usb: Rename define USB_HYBRID_{,PRO_}CANLIN_PRODUCT_ID
can: at91_can: silence clang warning
can: mcp251xfd: silence clang warning
can: mcp251x: mcp251x_can_probe(): silence clang warning
can: hi311x: hi3110_can_probe(): silence clang warning
can: softing: Remove redundant variable ptr
can: isotp: Add error message if txqueuelen is too small
can: isotp: add symbolic error message to isotp_module_init()
can: isotp: change error format from decimal to symbolic error names
can: proc: remove unnecessary variables
can: uapi: introduce CANFD_FDF flag for mixed content in struct canfd_frame
can: uapi: update CAN-FD frame description
dt-bindings: can: rcar_canfd: Convert to json-schema
...
====================
Link: https://lore.kernel.org/r/20210527084532.1384031-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document the fsl,i2c-erratum-a004447 flag which indicates the presence
of an i2c erratum on some QorIQ SoCs.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The compatible strings "zte,zx296702-uart" and "arm,primecell" are a
combination, but commit 89d4f98ae9 ("ARM: remove zte zx platform")
removes only the former. It is incorrect to match driver pl011 based only
on the remaining "arm,primecell". Delete it.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Documentation/devicetree/bindings/serial/pl011.yaml | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
Link: https://lore.kernel.org/r/20210520115440.8259-2-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmCqzFgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGIgQH/3nAV/fYbUCubEQe
RXUcjMGznIpdHeMiY/hPezObYnpBI3UAi2JwHCvQfoE8ckbx4tq8Xp+TUWebsdaf
zpDhKXDj2jHha1f5AixHCn1UFxiqOSn3d2muY2Bh1Nhg7iJuzU8xjIMCcOdss+fp
8e4wqidOHkpWvGJ96CQ5zCNxeXI+/f7VX2IgdJ+RCDwzbqJlIvvXwAkg1KrguUEz
EPmhpODqjPbVVc/mhtguMLMWl78WKCTBOSHCcYBolatXfm2ojsnX1hXprypWY4Mg
vKXxF/91AS8InCC08Jw+puz+fXDBx1jtNmFFhDOFTyz/TvwPaKZiWbAeXOZFJA2Z
Wm4su7g=
=cqxg
-----END PGP SIGNATURE-----
Merge v5.13-rc3 into drm-next
drm/i915 is extremely on fire without the below revert from -rc3:
commit 293837b9ac
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed May 19 05:55:57 2021 -1000
Revert "i915: fix remap_io_sg to verify the pgprot"
Backmerge so we don't have a too wide bisect window for anything
that's a more involved workload than booting the driver.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Convert the Renesas R-Car CAN FD Controller Device Tree binding
documentation to json-schema.
Document missing properties.
The CANFD clock needs to be configured for the maximum frequency on
R-Car V3M and V3H, too.
Update the example to match reality.
Link: https://lore.kernel.org/r/905134c87f72e2d8e37c309e0ce28ecd7d4f3992.1620323639.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Convert the Renesas R-Car CAN Controller Device Tree binding
documentation to json-schema.
Document missing properties.
Update the example to match reality.
Link: https://lore.kernel.org/r/561c35648e22a3c1e3b5477ae27fd1a50da7fe98.1620323639.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can and wireless trees. Notably including fixes for the recently
announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
touching some core parts of the stack, too, but nothing hair-raising.
Current release - regressions:
- tipc: make node link identity publish thread safe
- dsa: felix: re-enable TAS guard band mode
- stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()
- stmmac: fix system hang if change mac address after interface ifdown
Current release - new code bugs:
- mptcp: avoid OOB access in setsockopt()
- bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers
- ethtool: stats: fix a copy-paste error - init correct array size
Previous releases - regressions:
- sched: fix packet stuck problem for lockless qdisc
- net: really orphan skbs tied to closing sk
- mlx4: fix EEPROM dump support
- bpf: fix alu32 const subreg bound tracking on bitwise operations
- bpf: fix mask direction swap upon off reg sign change
- bpf, offload: reorder offload callback 'prepare' in verifier
- stmmac: Fix MAC WoL not working if PHY does not support WoL
- packetmmap: fix only tx timestamp on request
- tipc: skb_linearize the head skb when reassembling msgs
Previous releases - always broken:
- mac80211: address recent "FragAttacks" vulnerabilities
- mac80211: do not accept/forward invalid EAPOL frames
- mptcp: avoid potential error message floods
- bpf, ringbuf: deny reserve of buffers larger than ringbuf to prevent
out of buffer writes
- bpf: forbid trampoline attach for functions with variable arguments
- bpf: add deny list of functions to prevent inf recursion of tracing
programs
- tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
- can: isotp: prevent race between isotp_bind() and isotp_setsockopt()
- netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
fallback to non-AVX2 version
Misc:
- bpf: add kconfig knob for disabling unpriv bpf by default
-----BEGIN PGP SIGNATURE-----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=peMK
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
can and wireless trees. Notably including fixes for the recently
announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
touching some core parts of the stack, too, but nothing hair-raising.
Current release - regressions:
- tipc: make node link identity publish thread safe
- dsa: felix: re-enable TAS guard band mode
- stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()
- stmmac: fix system hang if change mac address after interface
ifdown
Current release - new code bugs:
- mptcp: avoid OOB access in setsockopt()
- bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers
- ethtool: stats: fix a copy-paste error - init correct array size
Previous releases - regressions:
- sched: fix packet stuck problem for lockless qdisc
- net: really orphan skbs tied to closing sk
- mlx4: fix EEPROM dump support
- bpf: fix alu32 const subreg bound tracking on bitwise operations
- bpf: fix mask direction swap upon off reg sign change
- bpf, offload: reorder offload callback 'prepare' in verifier
- stmmac: Fix MAC WoL not working if PHY does not support WoL
- packetmmap: fix only tx timestamp on request
- tipc: skb_linearize the head skb when reassembling msgs
Previous releases - always broken:
- mac80211: address recent "FragAttacks" vulnerabilities
- mac80211: do not accept/forward invalid EAPOL frames
- mptcp: avoid potential error message floods
- bpf, ringbuf: deny reserve of buffers larger than ringbuf to
prevent out of buffer writes
- bpf: forbid trampoline attach for functions with variable arguments
- bpf: add deny list of functions to prevent inf recursion of tracing
programs
- tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
- can: isotp: prevent race between isotp_bind() and
isotp_setsockopt()
- netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
fallback to non-AVX2 version
Misc:
- bpf: add kconfig knob for disabling unpriv bpf by default"
* tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits)
net: phy: Document phydev::dev_flags bits allocation
mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
mptcp: avoid error message on infinite mapping
mptcp: drop unconditional pr_warn on bad opt
mptcp: avoid OOB access in setsockopt()
nfp: update maintainer and mailing list addresses
net: mvpp2: add buffer header handling in RX
bnx2x: Fix missing error code in bnx2x_iov_init_one()
net: zero-initialize tc skb extension on allocation
net: hns: Fix kernel-doc
sctp: fix the proc_handler for sysctl encap_port
sctp: add the missing setting for asoc encap_port
bpf, selftests: Adjust few selftest result_unpriv outcomes
bpf: No need to simulate speculative domain for immediates
bpf: Fix mask direction swap upon off reg sign change
bpf: Wrap aux data inside bpf_sanitize_info container
bpf: Fix BPF_LSM kconfig symbol dependency
selftests/bpf: Add test for l3 use of bpf_redirect_peer
bpftool: Add sock_release help info for cgroup attach/prog load command
net: dsa: microchip: enable phy errata workaround on 9567
...
This converts the CYTTSP "Cypress TrueTouch Standard Product"
to YAML bindings and fixes and adds some things in the process:
- Rename the bindings file to cypress,cy8ctma340 after the main
product in the series.
- Add proper compatibles for the two known products:
CY8CTMA340 and CY8CTST341.
- Deprecate "cypress,cyttsp-spi" and "cypress,cyttsp-i2c"
because device compatibles should be named after the
hardware and not after which bus they are connected to.
The topology implicitly tells us which bus it is and what
interface to used.
- Add VCPIN and VDD supplies, these are present just like
on the CY8CTMA140.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526230352.1433537-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert the OMAP GPIO Device Tree binding documentation to json-schema.
The GPIO hogs node names defined to end with a 'hog' suffix.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
To reach higher capacities, arrays of chips are now pretty common.
Unfortunately, most of the controllers have been designed a decade ago
and did not all anticipate the need for several chip-selects. The new
cs-gpios property allows to workaround this limitation by adding as many
GPIO chip-select as needed.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20210510171800.27225-1-miquel.raynal@bootlin.com
Add compatible and constants for the power domains exposed by the RPMH
in the Qualcomm SC8180X platform.
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210120225037.1611353-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
For pressure calculation based on plates resistance we need some additional
properties:
- z1 and z2 channels with additional measurements between plates
- actual resistance of the touchscreen. Currently we use only
X-resistance.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210525054634.9134-4-o.rempel@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To calculate the pressure on a restrictive touchscreen we need to know
resistance at least of X plate. Some calculations need to use both X and
Y values. So let's add generic properties which can be used by all
drivers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210525054634.9134-3-o.rempel@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert the resistive-adc-touch binding to DT schema format using json-schema.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210525054634.9134-2-o.rempel@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since SMBus-Alert is an optional feature of SMBUS which
requires an additional pin, the smbus binding cannot be
used to indicate its support.
Add an additional smbus-alert binding specific for it and
update the description text of smbus to avoid mentioning
SMBus-Alert
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
SM8250 CCI is the same as SDM845, add an equivalent compatible for SM8250.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
add "rockchip,rk3568-i2c", "rockchip,rk3399-i2c" for i2c nodes on
a rk3568 platform to i2c-rk3x.yaml.
Signed-off-by: Liang Chen <cl@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmCF1cQeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvvgH/RAXkQ5IWAJfA6+M
8kPWOibeCRUftBQj/QP8saa/+e17R0LqFrMAOZUvIr5Z/midPsGmW3HaT0D9Un2R
80xi3bj+S4NJi1JNKr2JoEaw5T44LOU0snQ1tRU4+R/RIISNlRyYvcHyztz7cyHX
K3r5j4125uYytKG6tI0c7IWGN5XtgDfd8VSew+MqjOXmJSlkOUk+xqu0uKDPWTqU
AVCtPd2D7Yp7BcmQkJstu6+zPEuIbirGx+6c28pzT3d5q16+8iZ1G9jtpOk12mA7
jEIVgvIpevuZdkVUbf+gJMHyetVwNS0FtypUw5r1meoqwqeTNaCzc0KpFnQkO4Ak
AWGzkMY=
=QgJZ
-----END PGP SIGNATURE-----
Merge tag 'v5.12' into next
Sync up with mainline to get the latest device tree bindings and kernel
APIs.
The Apple GPIO controller is a simple combined pin and GPIO conroller
present on Apple ARM SoC platforms, including various iPhone and iPad
devices and the "Apple Silicon" Macs.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Link: https://lore.kernel.org/r/20210520171310.772-2-mark.kettenis@xs4all.nl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
trivial-devices.yaml already provide bindings for fsl-mma8450.
Since input/fsl-mma8450.txt provides no extra value, lets remove it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210521192210.12839-1-clabbe@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add YAML schema for the device tree bindings for DSI PHY.
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1621856653-10649-3-git-send-email-mkrishn@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add YAML schema for the device tree bindings for DSI
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1621856653-10649-2-git-send-email-mkrishn@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks
like DPU display controller, DSI etc. Add YAML schema
for DPU device tree bindings.
Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1621856653-10649-1-git-send-email-mkrishn@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Congatec's QMX6 system on module (SoM) uses a m41t62 as RTC. The
modules SQW clock output defaults to 32768 Hz. This behaviour is
used to provide the i.MX6 CKIL clock. Once the RTC driver is probed,
the clock is disabled and all i.MX6 functionality depending on
the 32 KHz clock has undefined behaviour. For example when using
the hardware watchdog the system will likely do arbitrary reboots.
Referencing the m41t62 directly results in a deadlock. The kernel
will see, that i.MX6 system clock needs the RTC clock and do probe
deferral. But the i.MX6 I2C module never becomes usable without the
i.MX6 CKIL clock and thus the RTC's clock will not be probed. So
from the kernel's perspective this is a chicken-and-egg problem.
Technically everything is fine by not touching anything, since
the RTC clock correctly enables the clock on reset (i.e. on
battery backup power loss) and also the bootloader enables it
in case an something (e.g. an unpatched kernel) disabled this
incorrectly.
A workaround for this issue is describing the square wave pin
as fixed-clock, which is registered early and basically how
this pin is used on the i.MX6.
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210428222953.235280-2-sebastian.reichel@collabora.com
There's some device specific fixes here but also an unusually large
number of fixes for the core, including both fixes for breakage
introduced on ACPI systems while fixing the long standing confusion
about the polarity of GPIO chip selects specified through DT, and fixes
for ordering issues on unregistration which have been exposed through
the wider usage of devm_.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmCrawIACgkQJNaLcl1U
h9B9Tgf/Sro65sL9JFR5EOWK71ljtUjJWyee9a4IBX82w0Ue6XqamrDzOuu3Kv5N
WBSO29o48RRFnLaWPNp0o9dkp4dtTNViThoRe5nJCmcOHKRTgh7e09EpewZWRRdY
uHV9Ii7v+xa1VUahHErCt88gahDwxb0n15nik1cn0mABgUYF1uEMHlD+B67y7m3m
95c63egMs9NW+htft2iUp/LrTDUBbqkQjimgvvQoLPd0wIpeQ/HYPgcaAvJ0nCao
UFsCMLL/qsSxdSQnO6pyoYT8BflhJxYySSOysfpWJAS+AyXVP6WZ+pBjNHT2AmPb
PO/skY6gRxIVn+KD/u2U5k7Q3WkeSw==
=MIpe
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's some device specific fixes here but also an unusually large
number of fixes for the core, including both fixes for breakage
introduced on ACPI systems while fixing the long standing confusion
about the polarity of GPIO chip selects specified through DT, and
fixes for ordering issues on unregistration which have been exposed
through the wider usage of devm_."
* tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sc18is602: implement .max_{transfer,message}_size() for the controller
spi: sc18is602: don't consider the chip select byte in sc18is602_check_transfer
MAINTAINERS: Add Alain Volmat as STM32 SPI maintainer
dt-bindings: spi: spi-mux: rename flash node
spi: Don't have controller clean up spi device before driver unbind
spi: Assume GPIO CS active high in ACPI case
spi: sprd: Add missing MODULE_DEVICE_TABLE
spi: Switch to signed types for *_native_cs SPI controller fields
spi: take the SPI IO-mutex in the spi_set_cs_timing method
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
spi: spi-zynq-qspi: Fix stack violation bug
spi: spi-zynq-qspi: Fix kernel-doc warning
spi: altera: Make SPI_ALTERA_CORE invisible
spi: Fix spi device unregister flow
Hi Mark, Rob
These adds R-Car D3 support for rsnd driver.
[1/3] is tidyup patch for dt-bindings (not only for D3).
[2/3], [3/3] are for R-Car D3.
Kuninori Morimoto (3):
ASoC: dt-bindings: renesas: rsnd: tidyup properties
ASoC: rsnd: tidyup loop on rsnd_adg_clk_query()
ASoC: rsnd: add null CLOCKIN support
.../bindings/sound/renesas,rsnd.yaml | 10 ++++-
sound/soc/sh/rcar/adg.c | 37 ++++++++++++++++---
2 files changed, 41 insertions(+), 6 deletions(-)
--
2.25.1
The BCM2711 VEC uses a slightly different, incompatible, setup than the
one used for the earlier SoC. Add a new compatible for it.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520150344.273900-3-maxime@cerno.tech
NXP/Goodix TFA989X (TFA1) amplifiers are controlled via an I2C bus.
Add simple device tree bindings that describe how to set them up
in the device tree.
Right now only nxp,tfa9895 is supported but this will be extended
to at least nxp,tfa9897 in the near future.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210513104129.36583-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
1) resets/reset-names needs minItems
2) It can use ports, not only port
3) It is not using audio-graph properties
Without this patch, we will get warnings
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wnrooe2z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The i.MX8MM integrates a newer version of the CSIS CSI-2 receiver as the
i.MX7 family. Differences in integration are are:
- An additional clock is required
- Up to 4 data lanes are supported
- No reset or PHY supply is present
Support it in the DT binding.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For some domains the resets of the devices in the domain are not
automatically triggered. Add an optional resets property to allow
the GPC driver to trigger those resets explicitly.
The resets belong to devices located inside the power domain,
which need to be held in reset across the power-up sequence. So we
have no means to specify what each reset is in a generic power-domain
binding. Same situation as with the clocks in this binding actually.
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add vendor prefix for DaSheng, Inc.
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The USB controller in the RK3308 is compatible with the RK3066 USB
controller.
This patch adds a compatible string for it.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210514150044.2099298-4-t.schramm@manjaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The nxp,isp1760 driver is old in the tree, but did not had a bindings
entry, since I am extend it to support isp1763 in the same family, use
this to add a proper yaml bindings file.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210513084717.2487366-9-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Another batch of removing unneeded type references in schemas
- Fix some out of date filename references
- Convert renesas,drif schema to use DT graph schema
-----BEGIN PGP SIGNATURE-----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=nz3k
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Another batch of removing unneeded type references in schemas
- Fix some out of date filename references
- Convert renesas,drif schema to use DT graph schema
* tag 'devicetree-fixes-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: More removals of type references on common properties
dt-bindings: media: renesas,drif: Use graph schema
leds: Fix reference file name of documentation
dt-bindings: phy: cadence-torrent: update reference file of docs
