mirror of
https://git.proxmox.com/git/mirror_ubuntu-kernels.git
synced 2025-11-30 10:00:49 +00:00
a778dbd9a8
495 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
9512433987 |
There's one large change in the core clk framework here. We change how
clk_set_rate_range() works so that the frequency is re-evaulated each time the
rate is changed. Previously we wouldn't let clk providers see a rate that was
different if it was still within the range, which could be bad for power if the
clk could run slower when a range expands. Now the clk provider can decide to
do something differently when the constraints change. This broke Nvidia's clk
driver so we had to wait for the fix for that to bake a little more in -next.
The rate range patch series also introduced a kunit suite for the clk framework
that we're going to extend in the next release. It already made it easy to find
corner cases in the rate range patches so I'm excited to see it cover more clk
code and increase our confidence in core framework patches in the future. I
also added a kunit test for the basic clk gate code and that work will continue
to cover more basic clk types: muxes, dividers, etc.
Beyond the core code we have the usual set of clk driver updates and additions.
Qualcomm again dominates the diffstat here with lots more SoCs being supported
and i.MX follows afer that with a similar number of SoCs gaining clk drivers.
Beyond those large additions there's drivers being modernized to use
clk_parent_data so we can move away from global string names for all the clks
in an SoC. Finally there's lots of little fixes all over the clk drivers for
typos, warnings, and missing clks that aren't critical and get batched up
waiting for the next merge window to open. Nothing super big stands out in the
driver pile. Full details are below.
Core:
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range
New Drivers:
- i.MXRT1050 clock driver and bindings
- i.MX8DXL clock driver and bindings
- i.MX93 clock driver and bindings
- NCO blocks on Apple SoCs
- Audio clks on StarFive JH7100 RISC-V SoC
- Add support for the new Renesas RZ/V2L SoC
- Qualcomm SDX65 A7 PLL
- Qualcomm SM6350 GPU clks
- Qualcomm SM6125, SM6350, QCS2290 display clks
- Qualcomm MSM8226 multimedia clks
Updates:
- Kunit tests for clk-gate implementation
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
- Mark mux table as const in clk-mux
- Make the all_lists array const
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add
support for dynamic mode
- Clock configuration on Microchip PolarFire SoCs
- Free allocations on probe error in Mediatek clk driver
- Modernize Mediatek clk driver by consolidating code
- Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on
Renesas R-Car S4-8
- Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on Rockchip rk3568
- Reintroduce the expected fractional-divider behaviour that disappeared
with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
- Remove SYS PLL 1/2 clock gates for i.MX8M*
- Remove AUDIO MCLK ROOT from i.MX7D
- Add fracn gppll clock type used by i.MX93
- Add new composite clock for i.MX93
- Add missing media mipi phy ref clock for i.MX8MP
- Fix off by one in imx_lpcg_parse_clks_from_dt()
- Rework for the imx pll14xx
- sama7g5: One low priority fix for GCLK of PDMC
- Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
- Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
- Add CAN-FD clocks on Renesas R-Car V3U
- Qualcomm SC8280XP RPMCC
- Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
- Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML
- Convert various Qualcomm drivers to use clk_parent_data
- Remove test clocks from various Qualcomm drivers
- Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
- Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
- Better pixel clk frequency support on Qualcomm RCG2 clks
-----BEGIN PGP SIGNATURE-----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=fP8L
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's one large change in the core clk framework here. We change how
clk_set_rate_range() works so that the frequency is re-evaulated each
time the rate is changed. Previously we wouldn't let clk providers see
a rate that was different if it was still within the range, which
could be bad for power if the clk could run slower when a range
expands. Now the clk provider can decide to do something differently
when the constraints change. This broke Nvidia's clk driver so we had
to wait for the fix for that to bake a little more in -next.
The rate range patch series also introduced a kunit suite for the clk
framework that we're going to extend in the next release. It already
made it easy to find corner cases in the rate range patches so I'm
excited to see it cover more clk code and increase our confidence in
core framework patches in the future. I also added a kunit test for
the basic clk gate code and that work will continue to cover more
basic clk types: muxes, dividers, etc.
Beyond the core code we have the usual set of clk driver updates and
additions. Qualcomm again dominates the diffstat here with lots more
SoCs being supported and i.MX follows afer that with a similar number
of SoCs gaining clk drivers. Beyond those large additions there's
drivers being modernized to use clk_parent_data so we can move away
from global string names for all the clks in an SoC. Finally there's
lots of little fixes all over the clk drivers for typos, warnings, and
missing clks that aren't critical and get batched up waiting for the
next merge window to open. Nothing super big stands out in the driver
pile. Full details are below.
Core:
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range
New Drivers:
- i.MXRT1050 clock driver and bindings
- i.MX8DXL clock driver and bindings
- i.MX93 clock driver and bindings
- NCO blocks on Apple SoCs
- Audio clks on StarFive JH7100 RISC-V SoC
- Add support for the new Renesas RZ/V2L SoC
- Qualcomm SDX65 A7 PLL
- Qualcomm SM6350 GPU clks
- Qualcomm SM6125, SM6350, QCS2290 display clks
- Qualcomm MSM8226 multimedia clks
Updates:
- Kunit tests for clk-gate implementation
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
- Mark mux table as const in clk-mux
- Make the all_lists array const
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding
and add support for dynamic mode
- Clock configuration on Microchip PolarFire SoCs
- Free allocations on probe error in Mediatek clk driver
- Modernize Mediatek clk driver by consolidating code
- Add watchdog (WDT), I2C, and pin function controller (PFC) clocks
on Renesas R-Car S4-8
- Improve the clocks for the Rockchip rk3568 display outputs
(parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on Rockchip
rk3568
- Reintroduce the expected fractional-divider behaviour that
disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
- Remove SYS PLL 1/2 clock gates for i.MX8M*
- Remove AUDIO MCLK ROOT from i.MX7D
- Add fracn gppll clock type used by i.MX93
- Add new composite clock for i.MX93
- Add missing media mipi phy ref clock for i.MX8MP
- Fix off by one in imx_lpcg_parse_clks_from_dt()
- Rework for the imx pll14xx
- sama7g5: One low priority fix for GCLK of PDMC
- Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
- Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
- Add CAN-FD clocks on Renesas R-Car V3U
- Qualcomm SC8280XP RPMCC
- Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
- Rework Qualcomm GCC bindings and convert SDM845 camera bindig to
YAML
- Convert various Qualcomm drivers to use clk_parent_data
- Remove test clocks from various Qualcomm drivers
- Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
- Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
- Better pixel clk frequency support on Qualcomm RCG2 clks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
clk: zynq: Update the parameters to zynq_clk_register_periph_clk
clk: zynq: trivial warning fix
clk: Drop the rate range on clk_put()
clk: test: Test clk_set_rate_range on orphan mux
clk: Initialize orphan req_rate
dt-bindings: clock: drop useless consumer example
dt-bindings: clock: renesas: Make example 'clocks' parsable
clk: qcom: gcc-msm8994: Fix gpll4 width
dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
clk: rs9: Add Renesas 9-series PCIe clock generator driver
clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
clk: visconti: prevent array overflow in visconti_clk_register_gates()
dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
clk: sifive: Move all stuff into SoCs header files from C files
clk: sifive: Add SoCs prefix in each SoCs-dependent data
riscv: dts: Change the macro name of prci in each device node
dt-bindings: change the macro name of prci in header files and example
clk: sifive: duplicate the macro definitions for the time being
clk: qcom: sm6125-gcc: fix typos in comments
clk: ti: clkctrl: fix typos in comments
...
|
||
|
Linus Torvalds
|
9bf3fc5007 |
Devicetree updates for v5.18:
- Add Krzysztof Kozlowski as co-maintainer for DT bindings providing much needed help. - DT schema validation now takes DTB files as input rather than intermediate YAML files. This decouples the validation from the source level syntax information. There's a bunch of schema fixes as a result of switching to DTB based validation which exposed some errors and incomplete schemas and examples. - Kbuild improvements to explicitly warn users running 'make dt_binding_check' on missing yamllint - Expand DT_SCHEMA_FILES kbuild variable to take just a partial filename or path instead of the full path to 1 file. - Convert various bindings to schema format: mscc,vsc7514-switch, multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma, msm/mdp4, rda,8810pl-uart - New schemas for u-boot environment variable partition, TI clksel - New compatible strings for Renesas RZ/V2L SoC - Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated HiSilicon - Add/fix schemas for QEMU Arm 'virt' machine - Drop unused of_alias_get_alias_list() function - Add a script to check DT unittest EXPECT message output. Pass messages also now print by default at PR_INFO level to help test automation. -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmI8s64QHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhwx3tD/4j56NE+aLkL636+I8tGFm3r+r6uLLT4SWh zDuiX3MP9OKfhJw43TjjURLwX5adBnG3nn505IXcAeiMRgEiciOpSa12w0mXyjMX QgVOcoaI3H2GBMEddJRo1PLTM/K5sYzZxAKLB827xoOk4mGNA0ZBAHvlB3W+yLE5 CE5yTaFoL4EMXuhWMtMrMlG1PQrbO3FpQ2DHBKrpxHPJmnHLk3c0YtMSTHGQnWbN AxT3S6RSsOLwLzZAXi2AlswqY82n5KtUf/RBrYi8rdr/xnIsCfMeXxafkP2Hyxkq L9RfKVn05c0LRtO1Eh8kYr+lmYmcWz/SIdJZXzpviIgE9MJapCAk0blBZ4S/FH0B EVGB1JkwCZFck6DBmkNJxAwR0iQOGWkJIkn6iBPNF0dHp58eE6adaXjhFH3uBEHk dXFaxPlvZ3P/Q2I/vmQ//m5tZMyjeCY2BlVYpkUJMOFfN26MIGHUmUlLnovLDqu4 lYgZG4V244uYzALLbURpbp+5dlPH/PL2gxvJJNqTS+/hXktQx1XnML4wD+xfJ4nT OY5DD7Z+KGBrdsMtxkFtIFvKD63E2gtAR5RZO0J/txlzhW7Wg6fJbhJZeRFhZKmN GAfud2s6rliyygByBL4ea50DSLLQpc/9HZtFmZ3NTILM6NbUR74sHt+1EZ1hee+M LaNsSscHuQ== =g1li -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add Krzysztof Kozlowski as co-maintainer for DT bindings providing much needed help. - DT schema validation now takes DTB files as input rather than intermediate YAML files. This decouples the validation from the source level syntax information. There's a bunch of schema fixes as a result of switching to DTB based validation which exposed some errors and incomplete schemas and examples. - Kbuild improvements to explicitly warn users running 'make dt_binding_check' on missing yamllint - Expand DT_SCHEMA_FILES kbuild variable to take just a partial filename or path instead of the full path to 1 file. - Convert various bindings to schema format: mscc,vsc7514-switch, multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma, msm/mdp4, rda,8810pl-uart - New schemas for u-boot environment variable partition, TI clksel - New compatible strings for Renesas RZ/V2L SoC - Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated HiSilicon - Add/fix schemas for QEMU Arm 'virt' machine - Drop unused of_alias_get_alias_list() function - Add a script to check DT unittest EXPECT message output. Pass messages also now print by default at PR_INFO level to help test automation. * tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits) dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable dt-bindings: nvmem: add U-Boot environment variables binding dt-bindings: ufs: qcom: Add SM6350 compatible string dt-bindings: dmaengine: sifive,fu540-c000: include generic schema dt-bindings: gpio: pca95xx: drop useless consumer example Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs" dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent' dt-bindings: gnss: Add two more chips dt-bindings: gnss: Rewrite sirfstar binding in YAML dt-bindings: gnss: Modify u-blox to use common bindings dt-bindings: gnss: Rewrite common bindings in YAML dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible dt-bindings: ata: ahci-platform: Add power-domains property dt-bindings: ata: ahci-platform: Convert DT bindings to yaml dt-bindings: kbuild: Use DTB files for validation dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate dt-bindings: Add QEMU virt machine compatible dt-bindings: arm: Convert QEMU fw-cfg to DT schema dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list dt-bindings: i2c: convert i2c-at91 to json-schema ... |
||
|
Bjorn Helgaas
|
c1e10d81da |
Merge branch 'remotes/lorenzo/pci/uniphier'
- Add DT binding and endpoint driver support for UniPhier NX1 SoC (Kunihiko Hayashi) * remotes/lorenzo/pci/uniphier: PCI: uniphier-ep: Add NX1 support PCI: uniphier-ep: Add SoC data structure dt-bindings: PCI: uniphier-ep: Add bindings for NX1 SoC |
||
|
Bjorn Helgaas
|
0c634fcb98 |
Merge branch 'remotes/lorenzo/pci/qcom'
- Save pointer to device match data instead of copying it (Dmitry Baryshkov) - Add ddrss_sf_tbu flag to device match data instead of checking OF compatible string (Dmitry Baryshkov) - Add SM8450 SoC PCIe DT bindings (Dmitry Baryshkov) - Add SM8450 PCIe support (Dmitry Baryshkov) * remotes/lorenzo/pci/qcom: PCI: qcom: Add SM8450 PCIe support PCI: qcom: Add ddrss_sf_tbu flag PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfg dt-bindings: pci: qcom: Document PCIe bindings for SM8450 |
||
|
Zong Li
|
0493692b40 |
dt-bindings: change the macro name of prci in header files and example
We currently change the macro name for fu540 and fu740 by adding the prefix respectively, the dt-bindings should be modified as well. Signed-off-by: Zong Li <zong.li@sifive.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Link: https://lore.kernel.org/r/f9284873c2993a9952d9fe4f8dd5e89f20daab75.1646388139.git.zong.li@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Richard Zhu
|
9be01ee228 |
dt-bindings: imx6q-pcie: Add iMX8MP PCIe compatible string
Add i.MX8MP PCIe compatible string. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1646644054-24421-5-git-send-email-hongxing.zhu@nxp.com |
||
|
Richard Zhu
|
21d5929ff2 |
dt-bindings: imx6q-pcie: Add iMX8MM PCIe compatible string
Add the i.MX8MM PCIe compatible string. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1646293805-18248-1-git-send-email-hongxing.zhu@nxp.com |
||
|
Dmitry Baryshkov
|
dddb4efa51 |
dt-bindings: pci: qcom: Document PCIe bindings for SM8450
Document the PCIe DT bindings for SM8450 SoC. The PCIe IP is similar to the one used on SM8250, however unlike SM8250, PCIe0 and PCIe1 use different set of clocks, so two compatible entries are required. Link: https://lore.kernel.org/r/20220223101435.447839-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> |
||
|
Pali Rohár
|
0124989220 |
dt-bindings: PCI: mvebu: Update information about intx interrupts
Link: https://lore.kernel.org/r/20220222155030.988-10-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> |
||
|
Pali Rohár
|
26b982ca83 |
dt-bindings: PCI: mvebu: Add num-lanes property
Controller driver needs to correctly configure PCIe link if it contains 1 or 4 SerDes PCIe lanes. Therefore add a new 'num-lanes' DT property for mvebu PCIe controller. Property 'num-lanes' seems to be de-facto standard way how number of lanes is specified in other PCIe controllers. Link: https://lore.kernel.org/r/20220222155030.988-5-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> |
||
|
Kunihiko Hayashi
|
f28b24042b |
dt-bindings: PCI: uniphier-ep: Add bindings for NX1 SoC
Update PCI endpoint binding document for UniPhier NX1 SoC. Add a compatible string, clock and reset lines for the SoC to the document. Link: https://lore.kernel.org/r/1644480596-20037-2-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> |
||
|
Linus Torvalds
|
d0a231f01e |
pci-v5.17-changes
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmHgpugUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vz59g//eWRLb0j2Vgv84ZH4x1iv6MaBboQr
2wScnfoN+MIoh+tuM4kRak15X4nB8rJhNZZCzesMUN6PeZvrkoPo4sz/xdzIrA/N
qY3h8NZ3nC4yCvs/tGem0zZUcSCJsxUAD0eegyMSa142xGIOQTHBSJRflR9osKSo
bnQlKTkugV8t4kD7NlQ5M3HzN3R+mjsII5JNzCqv2XlzAZG3D8DhPyIpZnRNAOmW
KiHOVXvQOocfUlvSs5kBlhgR1HgJkGnruCrJ1iDCWQH1Zk0iuVgoZWgVda6Cs3Xv
gcTJLB7VoSdNZKnct9aMNYPKziHkYc7clilPeDsJs5TlSv3kKERzLj6c/5ZAxFWN
+RsH+zYHDXJSsL/w0twPnaF5WCuVYUyrs3UiSjUvShKl1T9k9J+Jo8zwUUZx8Xb0
qXX8jRGMHolBGwPXm2fHEb4bwTUI8emPj29qK4L96KsQ3zKXWB8eGSosxUP52Tti
RR2WZjkvwlREZCJp6jSEJYkhzoEaVAm8CjKpKUuneX9WcUOsMBSs9k7EXbUy7JeM
hq5Keuqa8PZo/IK2DYYAchNnBJUDMsWJeduBW12qSmx3J+9victP2qOFu+9skP0a
85xlO6Cx8beiQh+XnY7jyROvIFuxTnGKHgkq/89Ham/whEzdJ+GRIiYB218kLLCW
ILdas3C2iiGz99I=
=Vgg4
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use pci_find_vsec_capability() instead of open-coding it (Andy
Shevchenko)
- Convert pci_dev_present() stub from macro to static inline to avoid
'unused variable' errors (Hans de Goede)
- Convert sysfs slot attributes from default_attrs to default_groups
(Greg Kroah-Hartman)
- Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum
(Rajat Jain)
- Remove unnecessary initialization of static variables (Longji Guo)
Resource management:
- Always write Intel I210 ROM BAR on update to work around device
defect (Bjorn Helgaas)
PCIe native device hotplug:
- Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede)
- Fix infinite loop in pciehp IRQ handler on power fault (Lukas
Wunner)
Power management:
- Convert amd64-agp, sis-agp, via-agp from legacy PCI power
management to generic power management (Vaibhav Gupta)
IOMMU:
- Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
so it can work with an IOMMU (Yifeng Li)
Error handling:
- Add PCI_ERROR_RESPONSE and related definitions for signaling and
checking for transaction errors on PCI (Naveen Naidu)
- Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers,
instead of in host controller drivers, when transactions fail on
PCI (Naveen Naidu)
- Use PCI_POSSIBLE_ERROR() to check for possible failure of config
reads (Naveen Naidu)
Peer-to-peer DMA:
- Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas)
ASPM:
- Calculate link L0s and L1 exit latencies when needed instead of
caching them (Saheed O. Bolarinwa)
- Calculate device L0s and L1 acceptable exit latencies when needed
instead of caching them (Saheed O. Bolarinwa)
- Remove struct aspm_latency since it's no longer needed (Saheed O.
Bolarinwa)
APM X-Gene PCIe controller driver:
- Fix IB window setup, which was broken by the fact that IB resources
are now sorted in address order instead of DT dma-ranges order (Rob
Herring)
Apple PCIe controller driver:
- Enable clock gating to save power (Hector Martin)
- Fix REFCLK1 enable/poll logic (Hector Martin)
Broadcom STB PCIe controller driver:
- Declare bitmap correctly for use by bitmap interfaces (Christophe
JAILLET)
- Clean up computation of legacy and non-legacy MSI bitmasks (Florian
Fainelli)
- Update suspend/resume/remove error handling to warn about errors
and not fail the operation (Jim Quinlan)
- Correct the "pcie" and "msi" interrupt descriptions in DT binding
(Jim Quinlan)
- Add DT bindings for endpoint voltage regulators (Jim Quinlan)
- Split brcm_pcie_setup() into two functions (Jim Quinlan)
- Add mechanism for turning on voltage regulators for connected
devices (Jim Quinlan)
- Turn voltage regulators for connected devices on/off when bus is
added or removed (Jim Quinlan)
- When suspending, don't turn off voltage regulators for wakeup
devices (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Add i.MX8MM support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Use DWC common ops instead of layerscape-specific link-up functions
(Hou Zhiqiang)
Intel VMD host bridge driver:
- Honor platform ACPI _OSC feature negotiation for Root Ports below
VMD (Kai-Heng Feng)
- Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan)
- Reset everything below VMD before enumerating to work around
failure to enumerate NVMe devices when guest OS reboots (Nirmal
Patel)
Bridge emulation (used by Marvell Aardvark and MVEBU):
- Make emulated ROM BAR read-only by default (Pali Rohár)
- Make some emulated legacy PCI bits read-only for PCIe devices (Pali
Rohár)
- Update reserved bits in emulated PCIe Capability (Pali Rohár)
- Allow drivers to emulate different PCIe Capability versions (Pali
Rohár)
- Set emulated Capabilities List bit for all PCIe devices, since they
must have at least a PCIe Capability (Pali Rohár)
Marvell Aardvark PCIe controller driver:
- Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2,
DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali
Rohár)
- Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2
registers (Pali Rohár)
- Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár)
- Disable bus mastering when unbinding host controller driver (Pali
Rohár)
- Mask all interrupts when unbinding host controller driver (Pali
Rohár)
- Fix memory leak in host controller unbind (Pali Rohár)
- Assert PERST# when unbinding host controller driver (Pali Rohár)
- Disable link training when unbinding host controller driver (Pali
Rohár)
- Disable common PHY when unbinding host controller driver (Pali
Rohár)
- Fix resource type checking to check only IORESOURCE_MEM, not
IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Implement pci_remap_iospace() for ARM so mvebu can use
devm_pci_remap_iospace() instead of the previous ARM-specific
pci_ioremap_io() interface (Pali Rohár)
- Use the standard pci_host_probe() instead of the device-specific
mvebu_pci_host_probe() (Pali Rohár)
- Replace all uses of ARM-specific pci_ioremap_io() with the ARM
implementation of the standard pci_remap_iospace() interface and
remove pci_ioremap_io() (Pali Rohár)
- Skip initializing invalid Root Ports (Pali Rohár)
- Check for errors from pci_bridge_emul_init() (Pali Rohár)
- Ignore any bridges at non-zero function numbers (Pali Rohár)
- Return ~0 data for invalid config read size (Pali Rohár)
- Disallow mapping interrupts on emulated bridges (Pali Rohár)
- Clear Root Port Memory & I/O Space Enable and Bus Master Enable at
initialization (Pali Rohár)
- Make type bits in Root Port I/O Base register read-only (Pali
Rohár)
- Disable Root Port windows when base/limit set to invalid values
(Pali Rohár)
- Set controller to Root Complex mode (Pali Rohár)
- Set Root Port Class Code to PCI Bridge (Pali Rohár)
- Update emulated Root Port secondary bus numbers to better reflect
the actual topology (Pali Rohár)
- Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so
pci_reset_secondary_bus() can reset connected devices (Pali Rohár)
- Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root
Ports (Pali Rohár)
- Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports
(Pali Rohár)
- Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on
Armada XP and newer devices (Pali Rohár)
- Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module
(Pali Rohár)
- Add support for compiling as a module (Pali Rohár)
MediaTek PCIe controller driver:
- Assert PERST# for 100ms to allow power and clock to stabilize
(qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Disable Mediatek DVFSRC voltage request since lack of DVFSRC to
respond to the request causes failure to exit L1 PM Substate
(Jianjun Wang)
MediaTek MT7621 PCIe controller driver:
- Declare mt7621_pci_ops static (Sergio Paracuellos)
- Give pcibios_root_bridge_prepare() access to host bridge windows
(Sergio Paracuellos)
- Move MIPS I/O coherency unit setup from driver to
pcibios_root_bridge_prepare() (Sergio Paracuellos)
- Add missing MODULE_LICENSE() (Sergio Paracuellos)
- Allow COMPILE_TEST for all arches (Sergio Paracuellos)
Microsoft Hyper-V host bridge driver:
- Add hv-internal interfaces to encapsulate arch IRQ dependencies
(Sunil Muthuswamy)
- Add arm64 Hyper-V vPCI support (Sunil Muthuswamy)
Qualcomm PCIe controller driver:
- Undo PM setup in qcom_pcie_probe() error handling path (Christophe
JAILLET)
- Use __be16 type to store return value from cpu_to_be16()
(Manivannan Sadhasivam)
- Constify static dw_pcie_ep_ops (Rikard Falkeborn)
Renesas R-Car PCIe controller driver:
- Fix aarch32 abort handler so it doesn't check the wrong bus clock
before accessing the host controller (Marek Vasut)
TI Keystone PCIe controller driver:
- Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode
DT properties (Kishon Vijay Abraham I)
MicroSemi Switchtec management driver:
- Add Gen4 automotive device IDs (Kelvin Cao)
- Declare state_names[] as static so it's not allocated and
initialized for every call (Kelvin Cao)
Host controller driver cleanups:
- Use of_device_get_match_data(), not of_match_device(), when we only
need the device data in altera, artpec6, cadence, designware-plat,
dra7xx, keystone, kirin (Fan Fei)
- Drop pointless of_device_get_match_data() cast in j721e (Bjorn
Helgaas)
- Drop redundant struct device * from j721e since struct cdns_pcie
already has one (Bjorn Helgaas)
- Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4,
mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier,
xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei)
- Fix invalid address space conversions in hisi, spear13xx (Bjorn
Helgaas)
Miscellaneous:
- Sort Intel Device IDs by value (Andy Shevchenko)
- Change Capability offsets to hex to match spec (Baruch Siach)
- Correct misspellings (Krzysztof Wilczyński)
- Terminate statement with semicolon in pci_endpoint_test.c (Ming
Wang)"
* tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits)
PCI: mt7621: Allow COMPILE_TEST for all arches
PCI: mt7621: Add missing MODULE_LICENSE()
PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare()
PCI: Let pcibios_root_bridge_prepare() access bridge->windows
PCI: mt7621: Declare mt7621_pci_ops static
PCI: brcmstb: Do not turn off WOL regulators on suspend
PCI: brcmstb: Add control of subdevice voltage regulators
PCI: brcmstb: Add mechanism to turn on subdev regulators
PCI: brcmstb: Split brcm_pcie_setup() into two funcs
dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.
PCI: brcmstb: Fix function return value handling
PCI: brcmstb: Do not use __GENMASK
PCI: brcmstb: Declare 'used' as bitmap, not unsigned long
PCI: hv: Add arm64 Hyper-V vPCI support
PCI: hv: Make the code arch neutral by adding arch specific interfaces
PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
x86/PCI: Remove initialization of static variables to false
PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum
misc: pci_endpoint_test: Terminate statement with semicolon
...
|
||
|
Linus Torvalds
|
3fb561b1e0 |
- added support for more BCM47XX based devices
- added MIPS support for brcmstb PCIe controller
- added Loongson 2K1000 reset driver
- removed board support for rbtx4938/rbtx4939
- removed support for TX4939 SoCs
- fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmHhNi8aHHRzYm9nZW5k
QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHDjGBAAogFGgNYUSzLUHQfGdBcx
fk/Lo+psvZ03cz5i9L4+7D0N3/K55/GXhSvDIHMhbYX41qklCy/ie+hxp3rwbjD3
RTLV3D4YdoJkcn+lPcKgtvGxKXjLE0A2ho/TmrAce2mvrei3BWu7dDmJC0WFjmt7
SZeg3ALjEdYVObO3vaN3pBMuuUuNvYS8DlLadzGwx1rDPHxGOZBri025bl9g6I+m
rQHSTa3p5DY4VsqEOXy1fUZchys1pZC6D7Ja4FPracnxYF0F4jLoWVhN+xt4QpcW
Q6o4+ykIDuL6kEKOwfTB094CeumIZSpcEwIKRYorIHeApG/XdgVBxJfcsaxBxI7V
4KYBkxG93AWwsp9CtxGEfOADoX3XnRbMZk58d6pVW7KUPXNin73jghxkc4vmaK1R
9lDyiq8RC8sh+HA5jkksCmf4otXstVlZGxNMKG3/qJy62pqEuFOIoB1Q8hN15c7w
HlFM7ZFf/6ZWVWm3dSKdB+hZNWTBVL2ucH9bf4s6f408Mj2sMMRIuFUKH/zJzVZZ
SeXy+tv5BcWbU+1EdaHzQJWM69iBCxasNyhPJkk3Hq+vqZdjkdPruzD3pVxdm169
E6cBUSWjwrJTt8EsBWKb1+hzjZk56Brff+9AlhbLWSChto/4SJmT/wZWGvTC2hqS
GBIIDNnd2G5k5xhuVs6qQIM=
=wsIG
-----END PGP SIGNATURE-----
Merge tag 'mips_5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- add support for more BCM47XX based devices
- add MIPS support for brcmstb PCIe controller
- add Loongson 2K1000 reset driver
- remove board support for rbtx4938/rbtx4939
- remove support for TX4939 SoCs
- fixes and cleanups
* tag 'mips_5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits)
MIPS: ath79: drop _machine_restart again
PCI: brcmstb: Augment driver for MIPs SOCs
MIPS: bmips: Remove obsolete DMA mapping support
MIPS: bmips: Add support PCIe controller device nodes
dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs
MIPS: compressed: Fix build with ZSTD compression
MIPS: BCM47XX: Add support for Netgear WN2500RP v1 & v2
MIPS: BCM47XX: Add support for Netgear R6300 v1
MIPS: BCM47XX: Add LEDs and buttons for Asus RTN-10U
MIPS: BCM47XX: Add board entry for Linksys WRT320N v1
MIPS: BCM47XX: Define Linksys WRT310N V2 buttons
MIPS: Remove duplicated include in local.h
MIPS: retire "asm/llsc.h"
MIPS: rework local_t operation on MIPS64
MIPS: fix local_{add,sub}_return on MIPS64
mips/pci: remove redundant ret variable
MIPS: Loongson64: Add missing of_node_put() in ls2k_reset_init()
MIPS: new Kconfig option ZBOOT_LOAD_ADDRESS
MIPS: enable both vmlinux.gz.itb and vmlinuz for generic
MIPS: signal: Return immediately if call fails
...
|
||
|
Bjorn Helgaas
|
0dfa6f6e68 |
Merge branch 'remotes/lorenzo/pci/keystone'
- Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode DT properties (Kishon Vijay Abraham I) * remotes/lorenzo/pci/keystone: PCI: keystone: Use phandle argument from "ti,syscon-pcie-id"/"ti,syscon-pcie-mode" dt-bindings: PCI: ti,am65: Fix "ti,syscon-pcie-id"/"ti,syscon-pcie-mode" to take argument |
||
|
Bjorn Helgaas
|
2948ce70e6 |
Merge branch 'remotes/lorenzo/pci/dwc'
- Don't ioremap NULL when DT lacks ATU resource (Tim Harvey) - Drop redundant qcom-ep error message for platform_get_irq_byname() failure (Krzysztof Wilczyński) - Add i.MX8MM support (Richard Zhu) - Use DWC common ops instead of layerscape-specific link-up functions (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: PCI: layerscape: Change to use the DWC common link-up check function PCI: imx: Add the imx8mm pcie support dt-bindings: imx6q-pcie: Add PHY phandles and name properties PCI: qcom-ep: Remove surplus dev_err() when using platform_get_irq_byname() PCI: dwc: Do not remap invalid res |
||
|
Linus Torvalds
|
4eb766f64d |
Devicetree updates for v5.17:
Bindings:
- DT schema conversions for Samsung clocks, RNG bindings, Qcom Command
DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl, Tegra I2C
and BPMP, pwm-vibrator, Arm DSU, and Cadence macb
- DT schema conversions for Broadcom platforms: interrupt controllers,
STB GPIO, STB waketimer, STB reset, iProc MDIO mux, iProc PCIe,
Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON, SYSTEMPORT, AMAC,
Northstar 2 PCIe PHY, GENET, moca PHY, GISB arbiter, and SATA
- Add binding schemas for Tegra210 EMC table, TI DC-DC converters,
- Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues
- More fixes due to 'unevaluatedProperties' enabling
- Data type fixes and clean-ups of binding examples found in preparation
to move to validating DTB files directly (instead of intermediate YAML
representation.
- Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus
- Add various new compatible strings
DT core:
- Silence a warning for overlapping reserved memory regions
- Reimplement unittest overlay tracking
- Fix stack frame size warning in unittest
- Clean-ups of early FDT scanning functions
- Fix handling of "linux,usable-memory-range" on EFI booted systems
- Add support for 'fail' status on CPU nodes
- Improve error message in of_phandle_iterator_next()
- kbuild: Disable duplicate unit-address warnings for disabled nodes
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmHfCdcQHHJvYmhAa2Vy
bmVsLm9yZwAKCRD6+121jbxhw+UZD/0ZMQQ6VF20MW7Gg0bOutd8Q6Q6opjrCG5c
nLW5mv8Q+um3sI1ZpwdMI4zAfCmTfeL13ZM9KtJKlJ0o41bgId+kZsezy4I2rN9+
sE1CwA4TninKTJsUkmyQX4fgJRUZ95Eubryfb07sy7nbK3LZQ+t18R5tzVBDpzy4
7hy4eM6mlMxgIJDi7EUboLZslkMM4TGGutLsk5C5T5V5lcWSt3Jj5WZtl5k4Wykq
j4i9mU+GGTZi0nGAJQ7lNoLPatZDSVQx5tzNV/Wi8hSwZbn0Kycu+IuWZyihILz/
9lzB/7tv8fl+xkTaJ5xxaY05HcDeX02yCLzh3PfAHRYdbQ2EkFoaKqJ81SLfAq5t
aH87v41wFSrjzynxpppqswXOdqI/jofrHrGlQldnw0VHGTjEfDbyZGRQFPHmuzTG
gXaSNKCxppG7ThpXarfu7D4TdYV75n+cBOsC/BBopYgIS2+xmjDA3t5Scks1/4NX
1Hfq9IMF9iYJYc/GNXBWcOrLn9d1ILYt6HrKRQar1NIEFH1Lt0c2aw5WsyvOZ4zx
aLHLSbEwnl+2wleyGB9YQkFaaF7N6qcid3u9KFRJP6nTojoaeQaIi3MR9F3LVReZ
LV5YfWEcij1zc+lzwgHc6+8bbgFxrKgOC2IL/B6u93u/BO0wmF/54kbEZKaLyX8d
a7Iii4IYFw==
=2g8v
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- DT schema conversions for Samsung clocks, RNG bindings, Qcom
Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl,
Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb
- DT schema conversions for Broadcom platforms: interrupt
controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux,
iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON,
SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB
arbiter, and SATA
- Add binding schemas for Tegra210 EMC table, TI DC-DC converters,
- Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues
- More fixes due to 'unevaluatedProperties' enabling
- Data type fixes and clean-ups of binding examples found in
preparation to move to validating DTB files directly (instead of
intermediate YAML representation.
- Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus
- Add various new compatible strings
DT core:
- Silence a warning for overlapping reserved memory regions
- Reimplement unittest overlay tracking
- Fix stack frame size warning in unittest
- Clean-ups of early FDT scanning functions
- Fix handling of "linux,usable-memory-range" on EFI booted systems
- Add support for 'fail' status on CPU nodes
- Improve error message in of_phandle_iterator_next()
- kbuild: Disable duplicate unit-address warnings for disabled nodes"
* tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits)
dt-bindings: net: mdio: Drop resets/reset-names child properties
dt-bindings: clock: samsung: convert S5Pv210 to dtschema
dt-bindings: clock: samsung: convert Exynos5410 to dtschema
dt-bindings: clock: samsung: convert Exynos5260 to dtschema
dt-bindings: clock: samsung: extend Exynos7 bindings with UFS
dt-bindings: clock: samsung: convert Exynos7 to dtschema
dt-bindings: clock: samsung: convert Exynos5433 to dtschema
dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'
dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example
dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example
dt-bindings: clock: imx5: Drop clock consumer node from example
dt-bindings: Drop required 'interrupt-parent'
dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'
dt-bindings: net: wireless: mt76: Fix 8-bit property sizes
dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
dt-bindings: net: stm32-dwmac: Make each example a separate entry
dt-bindings: net: Cleanup MDIO node schemas
...
|
||
|
Jim Quinlan
|
ea372f45cf |
dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
Add bindings for Brcmstb EP voltage regulators. A new mechanism is to be added to the Linux PCI subsystem that will allocate and turn on/off regulators. These are standard regulators -- vpcie12v, vpcie3v3, and vpcie3v3aux -- placed in the DT in the bridge node under the host bridge device. The use of a regulator property in the PCIe EP subnode such as "vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml file at https://github.com/devicetree-org/dt-schema/pull/63 Link: https://lore.kernel.org/r/20220106160332.2143-4-jim2101024@gmail.com Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> |
||
|
Jim Quinlan
|
504253e44a |
dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.
The "pcie" and "msi" interrupts were given the same interrupt when they are actually different. Interrupt-map only had the INTA entry; add the INTB, INTC, and INTD entries. Link: https://lore.kernel.org/r/20220106160332.2143-3-jim2101024@gmail.com Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> |
||
|
Rob Herring
|
da4b3d88b0 |
dt-bindings: Drop required 'interrupt-parent'
'interrupt-parent' is never required as it can be in a parent node or a parent node itself can be an interrupt provider. Where exactly it lives is outside the scope of a binding schema. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220107031905.2406176-1-robh@kernel.org |
||
|
Rob Herring
|
437b168028 |
dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
'max-functions' is already defined in pci-ep.yaml schema as a uint8 and all users of it expect an uint8. Drop the conflicting schema. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220107030358.2378221-1-robh@kernel.org |
||
|
Jim Quinlan
|
145790e55d |
dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs
The Broadcom STB Arm and MIPs SOCs use the same PCIe controller HW, although the MIPs version is older. Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Kishon Vijay Abraham I
|
d91e775e66 |
dt-bindings: PCI: ti,am65: Fix "ti,syscon-pcie-id"/"ti,syscon-pcie-mode" to take argument
Fix binding documentation of "ti,syscon-pcie-id" and "ti,syscon-pcie-mode" to take phandle with argument. The argument is the register offset within "syscon" used to configure PCIe controller. Similar change for j721e is discussed in [1] [1] -> http://lore.kernel.org/r/CAL_JsqKiUcO76bo1GoepWM1TusJWoty_BRy2hFSgtEVMqtrvvQ@mail.gmail.com Link: https://lore.kernel.org/r/20211126083119.16570-2-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> |
||
|
Richard Zhu
|
3e15f623bb |
dt-bindings: imx6q-pcie: Add PHY phandles and name properties
i.MX8MM PCIe has the PHY. Add a PHY phandle and name properties in the binding document. Link: https://lore.kernel.org/r/1638432158-4119-4-git-send-email-hongxing.zhu@nxp.com Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Rob Herring <robh@kernel.org> |
||
|
Rob Herring
|
b92225b034 |
dt-bindings: PCI: designware: Fix 'unevaluatedProperties' warnings
With 'unevaluatedProperties' support implemented, there's a number of
warnings from the Designware PCIe based bindings:
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.example.dt.yaml: pcie@1ffc000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'device_type', 'bus-range', 'ranges', '#interrupt-cells', 'interrupt-map-mask', 'interrupt-map' were unexpected)
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.example.dt.yaml: pcie@1ffc000: Unevaluated properties are not allowed ('clock-names' was unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f4000000: Unevaluated properties are not allowed ('bus-range', '#address-cells', '#size-cells', 'device_type', 'ranges', 'num-lanes', '#interrupt-cells', 'interrupts', 'interrupt-names', 'interrupt-map-mask', 'interrupt-map', 'clocks', 'clock-names' were unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f4000000: Unevaluated properties are not allowed ('clock-names' was unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f5000000: Unevaluated properties are not allowed ('bus-range', '#address-cells', '#size-cells', 'device_type', 'phys', 'ranges', 'num-lanes', '#interrupt-cells', 'interrupts', 'interrupt-names', 'interrupt-map-mask', 'interrupt-map', 'reset-gpios', 'pcie@0,0' were unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f5000000: Unevaluated properties are not allowed ('phys', 'hisilicon,clken-gpios' were unexpected)
Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dt.yaml: pcie@d0e00000: Unevaluated properties are not allowed ('device_type', '#address-cells', '#size-cells', 'linux,pci-domain', 'bus-range', '#interrupt-cells', 'interrupt-map-mask', 'interrupt-map' were unexpected)
Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dt.yaml: pcie@d0e00000: Unevaluated properties are not allowed ('resets', 'phys', 'phy-names', 'reset-assert-ms' were unexpected)
Documentation/devicetree/bindings/pci/rockchip-dw-pcie.example.dt.yaml: pcie@fe280000: Unevaluated properties are not allowed ('clock-names', 'msi-map', 'phys', 'phy-names', 'power-domains', 'resets', 'reset-names' were unexpected)
Documentation/devicetree/bindings/pci/samsung,exynos-pcie.example.dt.yaml: pcie@15700000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', '#interrupt-cells', 'device_type', 'bus-range', 'ranges', 'interrupt-map-mask', 'interrupt-map' were unexpected)
Documentation/devicetree/bindings/pci/samsung,exynos-pcie.example.dt.yaml: pcie@15700000: Unevaluated properties are not allowed ('clock-names', 'phys', 'vdd10-supply', 'vdd18-supply' were unexpected)
Documentation/devicetree/bindings/pci/sifive,fu740-pcie.example.dt.yaml: pcie@e00000000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', '#interrupt-cells', 'device_type', 'dma-coherent', 'bus-range', 'ranges', 'interrupts', 'interrupt-parent', 'interrupt-map-mask', 'interrupt-map', 'clock-names', 'clocks' were unexpected)
Documentation/devicetree/bindings/pci/sifive,fu740-pcie.example.dt.yaml: pcie@e00000000: Unevaluated properties are not allowed ('dma-coherent', 'clock-names', 'resets', 'pwren-gpios' were unexpected)
Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.example.dt.yaml: pcie-ep@66000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'reset-names', 'resets', 'phy-names', 'phys' were unexpected)
Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.example.dt.yaml: pcie@28400000: Unevaluated properties are not allowed ('clock-names' was unexpected)
Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.example.dt.yaml: pcie@28400000: Unevaluated properties are not allowed ('device_type', 'bus-range', 'num-viewport', '#address-cells', '#size-cells', '#interrupt-cells', 'ranges', 'interrupt-names', 'interrupt-map-mask', 'interrupt-map', 'max-link-speed' were unexpected)
The main problem is that snps,dw-pcie.yaml and snps,dw-pcie-ep.yaml
shouldn't set 'unevaluatedProperties: false'. Otherwise, bindings that
reference them cannot add additional properties. With that addressed,
there's a handful of other undocumented properties to add.
Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211206194426.2470080-1-robh@kernel.org
|
||
|
Rob Herring
|
375c4b837e |
dt-bindings: PCI: cdns-ep: Fix 'unevaluatedProperties' warnings
With 'unevaluatedProperties' support implemented, the TI j721e endpoint
binding example has a warning:
Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.example.dt.yaml: pcie-ep@d000000: Unevaluated properties are not allowed ('max-link-speed', 'num-lanes', 'max-functions' were unexpected)
Adjust where pci-ep.yaml is referenced so that ti,j721e-pci-ep.yaml will
include it.
Cc: Tom Joseph <tjoseph@cadence.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211206194413.2469643-1-robh@kernel.org
|
||
|
Rob Herring
|
dcd49679fb |
dt-bindings: PCI: Fix 'unevaluatedProperties' warnings
With 'unevaluatedProperties' support implemented, there's several
warnings due to undocumented properties:
Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.example.dt.yaml: pcie@1e140000: pcie@0,0: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.example.dt.yaml: pcie@1e140000: pcie@1,0: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.example.dt.yaml: pcie@1e140000: pcie@2,0: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dt.yaml: pcie@11230000: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/microchip,pcie-host.example.dt.yaml: pcie@2030000000: Unevaluated properties are not allowed ('interrupt-controller' was unexpected)
Documentation/devicetree/bindings/pci/ti,am65-pci-ep.example.dt.yaml: pcie-ep@5500000: Unevaluated properties are not allowed ('num-ib-windows', 'num-ob-windows' were unexpected)
Documentation/devicetree/bindings/pci/ti,am65-pci-host.example.dt.yaml: pcie@5500000: Unevaluated properties are not allowed ('num-viewport', 'interrupts' were unexpected)
Documentation/devicetree/bindings/pci/ti,j721e-pci-host.example.dt.yaml: pcie@2900000: Unevaluated properties are not allowed ('dma-coherent' was unexpected)
Add the necessary property definitions or remove the properties from the
examples to fix these warnings.
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Jianjun Wang <jianjun.wang@mediatek.com>
Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Daire McNamara <daire.mcnamara@microchip.com>
Cc: Abraham I <kishon@ti.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20211206194406.2469361-1-robh@kernel.org
|
||
|
Florian Fainelli
|
905b986d09 |
dt-bindings: pci: Convert iProc PCIe to YAML
Conver the iProc PCIe controller Device Tree binding to YAML now that all DTS in arch/arm and arch/arm64 have been fixed to be compliant. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211214035820.2984289-7-f.fainelli@gmail.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Hector Martin
|
42c2366a9c |
dt-bindings: pci: apple,pcie: Add t6000 support
This new SoC is compatible with the existing driver, but the block supports 4 downstream ports, so we need to adjust the binding to allow that. Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st> |
||
|
Florian Fainelli
|
5e8a7d26d9 |
dt-bindings: PCI: brcmstb: compatible is required
The compatible property is required, make sure the binding documents it as such. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211202223609.1171452-1-f.fainelli@gmail.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Linus Torvalds
|
0c5c62ddf8 |
pci-v5.16-changes
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmGFXBkUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vx6Tg/7BsGWm8f+uw/mr9lLm47q2mc4XyoO
7bR9KDp5NM84W/8ZOU7dqqqsnY0ddrSOLBRyhJJYMW3SwJd1y1ajTBsL1Ujqv+eN
z+JUFmhq4Laqm4k6Spc9CEJE+Ol5P6gGUtxLYo6PM2R0VxnSs/rDxctT5i7YOpCi
COJ+NVT/mc/by2loz1kLTSR9GgtBBgd+Y8UA33GFbHKssROw02L0OI3wffp81Oba
EhMGPoD+0FndAniDw+vaOSoO+YaBuTfbM92T/O00mND69Fj1PWgmNWZz7gAVgsXb
3RrNENUFxgw6CDt7LZWB8OyT04iXe0R2kJs+PA9gigFCGbypwbd/Nbz5M7e9HUTR
ray+1EpZib6+nIksQBL2mX8nmtyHMcLiM57TOEhq0+ECDO640MiRm8t0FIG/1E8v
3ZYd9w20o/NxlFNXHxxpZ3D/osGH5ocyF5c5m1rfB4RGRwztZGL172LWCB0Ezz9r
eHB8sWxylxuhrH+hp2BzQjyddg7rbF+RA4AVfcQSxUpyV01hoRocKqknoDATVeLH
664nJIINFxKJFwfuL3E6OhrInNe1LnAhCZsHHqbS+NNQFgvPRznbixBeLkI9dMf5
Yf6vpsWO7ur8lHHbRndZubVu8nxklXTU7B/w+C11sq6k9LLRJSHzanr3Fn9WA80x
sznCxwUvbTCu1r0=
=nsMh
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Conserve IRQs by setting up portdrv IRQs only when there are users
(Jan Kiszka)
- Rework and simplify _OSC negotiation for control of PCIe features
(Joerg Roedel)
- Remove struct pci_dev.driver pointer since it's redundant with the
struct device.driver pointer (Uwe Kleine-König)
Resource management:
- Coalesce contiguous host bridge apertures from _CRS to accommodate
BARs that cover more than one aperture (Kai-Heng Feng)
Sysfs:
- Check CAP_SYS_ADMIN before parsing user input (Krzysztof
Wilczyński)
- Return -EINVAL consistently from "store" functions (Krzysztof
Wilczyński)
- Use sysfs_emit() in endpoint "show" functions to avoid buffer
overruns (Kunihiko Hayashi)
PCIe native device hotplug:
- Ignore Link Down/Up caused by resets during error recovery so
endpoint drivers can remain bound to the device (Lukas Wunner)
Virtualization:
- Avoid bus resets on Atheros QCA6174, where they hang the device
(Ingmar Klein)
- Work around Pericom PI7C9X2G switch packet drop erratum by using
store and forward mode instead of cut-through (Nathan Rossi)
- Avoid trying to enable AtomicOps on VFs; the PF setting applies to
all VFs (Selvin Xavier)
MSI:
- Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
Song)
VPD:
- Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
in the possible VPD space; use these to simplify the cxgb3 driver
(Heiner Kallweit)
Peer-to-peer DMA:
- Add (not subtract) the bus offset when calculating DMA address
(Wang Lu)
ASPM:
- Re-enable LTR at Downstream Ports so they don't report Unsupported
Requests when reset or hot-added devices send LTR messages
(Mingchuang Qiao)
Apple PCIe controller driver:
- Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
Zyngier)
Cadence PCIe controller driver:
- Return success when probe succeeds instead of falling into error
path (Li Chen)
HiSilicon Kirin PCIe controller driver:
- Reorganize PHY logic and add support for external PHY drivers
(Mauro Carvalho Chehab)
- Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
Carvalho Chehab)
- Add Kirin 970 support (Mauro Carvalho Chehab)
- Make driver removable (Mauro Carvalho Chehab)
Intel VMD host bridge driver:
- If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
enabled (Adrian Huang)
- Number each controller so we can tell them apart in
/proc/interrupts (Chunguang Xu)
- Avoid building on UML because VMD depends on x86 bare metal APIs
(Johannes Berg)
Marvell Aardvark PCIe controller driver:
- Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
- Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
- Downgrade PIO Response Status messages to debug level (Marek Behún)
- Preserve CRS SV (Config Request Retry Software Visibility) bit in
emulated Root Control register (Pali Rohár)
- Fix issue in configuring reference clock (Pali Rohár)
- Don't clear status bits for masked interrupts (Pali Rohár)
- Don't mask unused interrupts (Pali Rohár)
- Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
- Retry config accesses on CRS response (Pali Rohár)
- Simplify emulated Root Capabilities initialization (Pali Rohár)
- Fix several link training issues (Pali Rohár)
- Fix link-up checking via LTSSM (Pali Rohár)
- Fix reporting of Data Link Layer Link Active (Pali Rohár)
- Fix emulation of W1C bits (Marek Behún)
- Fix MSI domain .alloc() method to return zero on success (Marek
Behún)
- Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
(Marek Behún)
- Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
at startup; PCI core will set those as necessary (Pali Rohár)
- When operating as a Root Port, set class code to "PCI Bridge"
instead of the default "Mass Storage Controller" (Pali Rohár)
- Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
implement this per spec (Pali Rohár)
- Add emulation of option ROM BAR since aardvark doesn't implement
this per spec (Pali Rohár)
MediaTek MT7621 PCIe controller driver:
- Add MediaTek MT7621 PCIe host controller driver and DT binding
(Sergio Paracuellos)
Qualcomm PCIe controller driver:
- Add SC8180x compatible string (Bjorn Andersson)
- Add endpoint controller driver and DT binding (Manivannan
Sadhasivam)
- Restructure to use of_device_get_match_data() (Prasad Malisetty)
- Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)
Renesas R-Car PCIe controller driver:
- Remove unnecessary includes (Geert Uytterhoeven)
Rockchip DesignWare PCIe controller driver:
- Add DT binding (Simon Xue)
Socionext UniPhier Pro5 controller driver:
- Serialize INTx masking/unmasking (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Run dwc .host_init() method before registering MSI interrupt
handler so we can deal with pending interrupts left by bootloader
(Bjorn Andersson)
- Clean up Kconfig dependencies (Andy Shevchenko)
- Export symbols to allow more modular drivers (Luca Ceresoli)
TI DRA7xx PCIe controller driver:
- Allow host and endpoint drivers to be modules (Luca Ceresoli)
- Enable external clock if present (Luca Ceresoli)
TI J721E PCIe driver:
- Disable PHY when probe fails after initializing it (Christophe
JAILLET)
MicroSemi Switchtec management driver:
- Return error to application when command execution fails because an
out-of-band reset has cleared the device BARs, Memory Space Enable,
etc (Kelvin Cao)
- Fix MRPC error status handling issue (Kelvin Cao)
- Mask out other bits when reading of management VEP instance ID
(Kelvin Cao)
- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
(Kelvin Cao)
- Add check of event support (Logan Gunthorpe)
Miscellaneous:
- Remove unused pci_pool wrappers, which have been replaced by
dma_pool (Cai Huoqing)
- Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
Wilczyński)
- Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
Wilczyński)
- Fix some sscanf(), sprintf() format mismatches (Krzysztof
Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof
Wilczyński)
- Correct some misspellings (Krzysztof Wilczyński)"
* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
PCI: Add ACS quirk for Pericom PI7C9X2G switches
PCI: apple: Configure RID to SID mapper on device addition
iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
PCI: apple: Implement MSI support
PCI: apple: Add INTx and per-port interrupt support
PCI: kirin: Allow removing the driver
PCI: kirin: De-init the dwc driver
PCI: kirin: Disable clkreq during poweroff sequence
PCI: kirin: Move the power-off code to a common routine
PCI: kirin: Add power_off support for Kirin 960 PHY
PCI: kirin: Allow building it as a module
PCI: kirin: Add MODULE_* macros
PCI: kirin: Add Kirin 970 compatible
PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
PCI: apple: Set up reference clocks when probing
PCI: apple: Add initial hardware bring-up
PCI: of: Allow matching of an interrupt-map local to a PCI device
of/irq: Allow matching of an interrupt-map local to an interrupt controller
irqdomain: Make of_phandle_args_to_fwspec() generally available
PCI: Do not enable AtomicOps on VFs
...
|
||
|
Bjorn Helgaas
|
cd48bff78a |
Merge branch 'remotes/lorenzo/pci/qcom'
- Add Qualcomm PCIe Endpoint controller driver and DT binding (Manivannan Sadhasivam) - Add qcom struct for device-specific details in match data (Prasad Malisetty) - Switch pcie_1_pipe_clk_src from TCXO to pipe clock after PHY init in SC7280 (Prasad Malisetty) - Add .compatible device ID for SC8180x platform (Bjorn Andersson) * remotes/lorenzo/pci/qcom: PCI: qcom: Add sc8180x compatible PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280 PCI: qcom: Replace ops with struct pcie_cfg in pcie match data MAINTAINERS: Add entry for Qualcomm PCIe Endpoint driver and binding PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver dt-bindings: PCI: Add Qualcomm PCIe Endpoint controller |
||
|
Bjorn Helgaas
|
83e168d607 |
Merge branch 'pci/host/mt7621'
- Add MediaTek MT7621 SoC PCIe host controller (moved from staging) (Sergio Paracuellos) * pci/host/mt7621: MAINTAINERS: Add Sergio Paracuellos as MT7621 PCIe maintainer PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver dt-bindings: PCI: Add MT7621 SoC PCIe host controller # Conflicts: # drivers/pci/controller/Kconfig # drivers/pci/controller/Makefile |
||
|
Linus Torvalds
|
ae45d84fc3 |
ARM: SoC DT updates for v5.16
This is a rather large update for the ARM devicetree files, after a few
quieter releases, with 775 total commits and 47 branches pulled into
this one. There are 5 new SoC types plus some minor variations, and
a total of 60 new machines, so I'm limiting the summary to the main
noteworthy items:
- Apple M1 gain support for PCI and pinctrl, getting a bit
closer to a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as
well as SM7225, 11 new smartphones, and three additional
Chromebooks, and improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version
of their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a
number of improvements for the recently added SAMA7 family.
The LAN966 SoC that was added in the platform code does not
have dts files yet. Two board files are added for the older
at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600
as BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new
development boards using RK3328/RK3399/RK3566, and one
Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the
new MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based
ebook readers, and three additional development boards, which
is notably less than their usual additions, but they also gain
improvements to their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with
a reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many
updates for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi
boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for
more hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub
home automation controllers, along with changes to other
machines
- Rob Herring continues his work on fixing dtc warnings all over
the tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc
-----BEGIN PGP SIGNATURE-----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=jp4P
-----END PGP SIGNATURE-----
Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
|
||
|
Yuya Hamamachi
|
6162c4a511 |
dt-bindings: pci: rcar-pci-ep: Document r8a7795
Document the support for R-Car PCIe EP on R8A7795 SoC device. Signed-off-by: Yuya Hamamachi <yuya.hamamachi.sx@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Link: https://lore.kernel.org/r/e4acfe90021e45658e82ed042746707ace208a93.1635337518.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Sergio Paracuellos
|
27cee7d7ce |
dt-bindings: PCI: Add MT7621 SoC PCIe host controller
Add device tree binding documentation for PCIe in MT7621 SoCs. Link: https://lore.kernel.org/r/20210922050035.18162-2-sergio.paracuellos@gmail.com Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> |
||
|
Bjorn Andersson
|
45a3ec8913 |
PCI: qcom: Add sc8180x compatible
The SC8180x platform comes with 4 PCIe controllers, typically used for things such as NVME storage or connecting a SDX55 5G modem. Add a compatible for this, that just reuses the 1.9.0 ops. Link: https://lore.kernel.org/linux-arm-msm/20210725040038.3966348-4-bjorn.andersson@linaro.org/ Link: https://lore.kernel.org/r/20210823154958.305677-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [lorenzo.pieralisi@arm.com: updated match data structure] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> |
||
|
Simon Xue
|
af7cda832f |
dt-bindings: rockchip: Add DesignWare based PCIe controller
Document DT bindings for PCIe controller found on Rockchip SoC. Link: https://lore.kernel.org/r/20210818093406.157788-1-xxm@rock-chips.com Signed-off-by: Simon Xue <xxm@rock-chips.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> |
||
|
Rob Herring
|
a70ae18b9e |
Merge branch 'dt/linus' into dt/next
Merge fixes to avoid binding schema warnings. Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Manivannan Sadhasivam
|
31c9ef0025 |
dt-bindings: PCI: Add Qualcomm PCIe Endpoint controller
Add devicetree binding for Qualcomm PCIe Endpoint controller used in platforms like SDX55. The Endpoint controller is based on the DesignWare core with Qualcomm-specific wrappers. Link: https://lore.kernel.org/r/20210920065946.15090-2-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> |
||
|
Mauro Carvalho Chehab
|
354754f559 |
dt-bindings: PCI: tegra194: Fix PCIe endpoint node names
As defined by Documentation/devicetree/bindings/pci/pci-ep.yaml, PCIe endpoints match this pattern: properties: $nodename: pattern: "^pcie-ep@" Change the existing ones in the DT bindings examples to avoid warnings during DT bindings validation. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
|
Rob Herring
|
67006e30e2 |
dt-bindings: Drop more redundant 'maxItems/minItems'
Another round of removing redundant minItems/maxItems from new schema in the recent merge window. If a property has an 'items' list, then a 'minItems' or 'maxItems' with the same size as the list is redundant and can be dropped. Note that is DT schema specific behavior and not standard json-schema behavior. The tooling will fixup the final schema adding any unspecified minItems/maxItems. Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Marek Vasut <marex@denx.de> Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: dri-devel@lists.freedesktop.org Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210928222920.2204761-1-robh@kernel.org |
||
|
Mark Kettenis
|
a3b539fedc |
dt-bindings: pci: Add DT bindings for apple,pcie
The Apple PCIe host controller is a PCIe host controller with multiple root ports present in Apple ARM SoC platforms, including various iPhone and iPad devices and the "Apple Silicon" Macs. Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Link: https://lore.kernel.org/r/20210921183420.436-4-kettenis@openbsd.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Mark Kettenis
|
2e8b4b6ebe |
dt-bindings: interrupt-controller: Convert MSI controller to json-schema
Split the MSI controller bindings from the MSI binding document into DT schema format using json-schema. Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Link: https://lore.kernel.org/r/20210921183420.436-2-kettenis@openbsd.org Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Linus Torvalds
|
ac08b1c68d |
pci-v5.15-changes
-----BEGIN PGP SIGNATURE-----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=g1WT
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Convert controller drivers to generic_handle_domain_irq() (Marc
Zyngier)
- Simplify VPD (Vital Product Data) access and search (Heiner
Kallweit)
- Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use
simplified VPD interfaces (Heiner Kallweit)
- Run Max Payload Size quirks before configuring MPS; work around
ASMedia ASM1062 SATA MPS issue (Marek Behún)
Resource management:
- Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof
Wilczyński)
- Optimize pci_resource_len() to reduce kernel size (Zhen Lei)
PCI device hotplug:
- Fix a double unmap in ibmphp (Vishal Aslot)
PCIe port driver:
- Enable Bandwidth Notification only if port supports it (Stuart
Hayes)
Sysfs/proc/syscalls:
- Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński)
- Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof
Wilczyński)
- Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński)
Virtualization:
- Extend "pci=noats" to also turn on Translation Blocking to protect
against some DMA attacks (Alex Williamson)
- Add sysfs mechanism to control the type of reset used between
device assignments to VMs (Amey Narkhede)
- Add support for ACPI _RST reset method (Shanker Donthineni)
- Add ACS quirks for Cavium multi-function devices (George Cherian)
- Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan)
- Allow HiSilicon AMBA devices that appear as fake PCI devices to use
PASID and SVA (Zhangfei Gao)
Endpoint framework:
- Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I)
- Zero-initialize endpoint test tool parameters so we don't use
random parameters (Shunyong Yang)
APM X-Gene PCIe controller driver:
- Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang)
Broadcom iProc PCIe controller driver:
- Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because
it's optional on BCMA devices (Rob Herring)
- Fix BCMA probe resource handling (Rob Herring)
Cadence PCIe driver:
- Work around J7200 Link training electrical issue by increasing
delays in LTSSM (Nadeem Athani)
Intel IXP4xx PCI controller driver:
- Depend on ARCH_IXP4XX to avoid useless config questions (Geert
Uytterhoeven)
Intel Keembay PCIe controller driver:
- Add Intel Keem Bay PCIe controller (Srikanth Thokala)
Marvell Aardvark PCIe controller driver:
- Work around config space completion handling issues (Evan Wang)
- Increase timeout for config access completions (Pali Rohár)
- Emulate CRS Software Visibility bit (Pali Rohár)
- Configure resources from DT 'ranges' property to fix I/O space
access (Pali Rohár)
- Serialize INTx mask/unmask (Pali Rohár)
MediaTek PCIe controller driver:
- Add MT7629 support in DT (Chuanjia Liu)
- Fix an MSI issue (Chuanjia Liu)
- Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number
("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if
present (Chuanjia Liu)
Microsoft Hyper-V host bridge driver:
- Add ARM64 support (Boqun Feng)
- Support "Create Interrupt v3" message (Sunil Muthuswamy)
NVIDIA Tegra PCIe controller driver:
- Use seq_puts(), move err_msg from stack to static, fix OF node leak
(Christophe JAILLET)
NVIDIA Tegra194 PCIe driver:
- Disable suspend when in Endpoint mode (Om Prakash Singh)
- Fix MSI-X address programming error (Om Prakash Singh)
- Disable interrupts during suspend to avoid spurious AER link down
(Om Prakash Singh)
Renesas R-Car PCIe controller driver:
- Work around hardware issue that prevents Link L1->L0 transition
(Marek Vasut)
- Fix runtime PM refcount leak (Dinghao Liu)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK356X host controller driver (Simon Xue)
TI J721E PCIe driver:
- Add support for J7200 and AM64 (Kishon Vijay Abraham I)
Toshiba Visconti PCIe controller driver:
- Add Toshiba Visconti PCIe host controller driver (Nobuhiro
Iwamatsu)
Xilinx NWL PCIe controller driver:
- Enable PCIe reference clock via CCF (Hyun Kwon)
Miscellaneous:
- Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET)
- Fix pci_dev_str_match_path() alloc while atomic bug (used for
kernel parameters that specify devices) (Dan Carpenter)
- Remove pointless Precision Time Management warning when PTM is
present but not enabled (Jakub Kicinski)
- Remove surplus "break" statements (Krzysztof Wilczyński)"
* tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits)
PCI: ibmphp: Fix double unmap of io_mem
x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API
PCI/VPD: Use unaligned access helpers
PCI/VPD: Clean up public VPD defines and inline functions
cxgb4: Use pci_vpd_find_id_string() to find VPD ID string
PCI/VPD: Add pci_vpd_find_id_string()
PCI/VPD: Include post-processing in pci_vpd_find_tag()
PCI/VPD: Stop exporting pci_vpd_find_info_keyword()
PCI/VPD: Stop exporting pci_vpd_find_tag()
PCI: Set dma-can-stall for HiSilicon chips
PCI: rockchip-dwc: Add Rockchip RK356X host controller driver
PCI: dwc: Remove surplus break statement after return
PCI: artpec6: Remove local code block from switch statement
PCI: artpec6: Remove surplus break statement after return
MAINTAINERS: Add entries for Toshiba Visconti PCIe controller
PCI: visconti: Add Toshiba Visconti PCIe host controller driver
PCI/portdrv: Enable Bandwidth Notification only if port supports it
PCI: Allow PASID on fake PCIe devices without TLP prefixes
PCI: mediatek: Use PCI domain to handle ports detection
PCI: mediatek: Add new method to get irq number
...
|
||
|
Bjorn Helgaas
|
6e129176c3 |
Merge branch 'remotes/lorenzo/pci/endpoint'
- Add max-virtual-functions to endpoint binding (Kishon Vijay Abraham I) - Add pci_epf_add_vepf() API to add virtual function to endpoint (Kishon Vijay Abraham I) - Add pci_epf_vepf_link() to link virtual function to endpoint physical function (Kishon Vijay Abraham I) - Add virtual function number to pci_epc_ops endpoint ops interfaces (Kishon Vijay Abraham I) - Simplify register base address computation for endpoint BAR configuration (Kishon Vijay Abraham I) - Add support to configure virtual functions in cadence endpoint driver (Kishon Vijay Abraham I) - Add SR-IOV configuration to endpoint test driver (Kishon Vijay Abraham I) - Document configfs usage to create virtual functions for endpoints (Kishon Vijay Abraham I) * remotes/lorenzo/pci/endpoint: Documentation: PCI: endpoint/pci-endpoint-cfs: Guide to use SR-IOV misc: pci_endpoint_test: Populate sriov_configure ops to configure SR-IOV device PCI: cadence: Add support to configure virtual functions PCI: cadence: Simplify code to get register base address for configuring BAR PCI: endpoint: Add virtual function number in pci_epc ops PCI: endpoint: Add support to link a physical function to a virtual function PCI: endpoint: Add support to add virtual function in endpoint core dt-bindings: PCI: pci-ep: Add binding to specify virtual function |
||
|
Bjorn Helgaas
|
eccefc748e |
Merge branch 'remotes/lorenzo/pci/xilinx-nwl'
- Document optional clock DT property (Michal Simek) - Enable PCIe ref clock (Hyun Kwon) * remotes/lorenzo/pci/xilinx-nwl: PCI: xilinx-nwl: Enable the clock through CCF dt-bindings: pci: xilinx-nwl: Document optional clock property |
||
|
Bjorn Helgaas
|
c501cf9cbe |
Merge branch 'remotes/lorenzo/pci/mediatek'
- Split DT bindings for PCIe controllers with independent MSI domains into separate nodes for MT2712/MT7622 (Chuanjia Liu) - Locate shared registers from "mediatek,generic-pciecfg" property (Chuanjia Liu) - Get IRQ from "pcie_irq" if "interrupt-names" property is present to fix an MSI issue (Chuanjia Liu) - Get PCI domain from "linux,pci-domain" property if present (Chuanjia Liu) * remotes/lorenzo/pci/mediatek: PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number PCI: mediatek: Add new method to get shared pcie-cfg base address dt-bindings: PCI: mediatek: Update the Device tree bindings |
||
|
Richard Zhu
|
751ca492f1 |
dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema
Convert the fsl,imx6q-pcie.txt into a schema. - ranges property should be grouped by region, with no functional changes. - only one propert is allowed in the compatible string, remove "snps,dw-pcie". Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Link: https://lore.kernel.org/r/1630046580-19282-2-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Rob Herring
|
1c3ac086fd |
dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries
'enum' is equivalent to 'oneOf' with a list of 'const' entries, but 'enum' is more concise and yields better error messages. Cc: Maxime Ripard <mripard@kernel.org> Cc: Vignesh R <vigneshr@ti.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: dmaengine@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-phy@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-spi@vger.kernel.org Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> (mipi-ccs) Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210824202014.978922-1-robh@kernel.org |
||
|
Chuanjia Liu
|
aa6eca5b81 |
dt-bindings: PCI: mediatek: Update the Device tree bindings
There are two independent PCIe controllers in MT2712 and MT7622 platform. Each of them should contain an independent MSI domain. In old dts architecture, MSI domain will be inherited from the root bridge, and all of the devices will share the same MSI domain. Hence that, the PCIe devices will not work properly if the irq number which required is more than 32. Split the PCIe node for MT2712 and MT7622 platform to comply with the hardware design and fix MSI issue. Link: https://lore.kernel.org/r/20210823032800.1660-2-chuanjia.liu@mediatek.com Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh+dt@kernel.org> Acked-by: Ryder Lee <ryder.lee@mediatek.com> |