* rename lxc.haltsignal to lxc.signal.halt
* rename lxc.rebootsignal to lxc.signal.reboot
* rename lxc.stopsignal to lxc.signal.stop
the legacy keys will be kept around until LXC 3.0 and then will be
removed.
Signed-off-by: 0x0916 <w@laoqinren.net>
The warning has been present since commit 32b37181ea (with no purpose stated).
Support for dynamically linked Busybox has been added since commit bf6cc73696.
Haven't encountered any issues with dynamically linked Busybox in my last
2 years' testing.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>
On certain systems, some binaries needed by the container features (dropbear,
openssh), may be placed in non-standard (aka non-distribution-managed
locations), such as /usr/local/*, /opt/local/*, etc. Don't copy the respective
binaries in the container and return a clear error why.
The user should only use these binaries if they are installed at system-wide
locations on the host, such as /{s,}bin or /usr/{s,}bin.
v2:
- check that binary paths adhere to /{,usr/}{,s}bin only
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Currently, when installing OpenSSH in a Busybox container, the template searches
for all the OpenSSH client binaries available in the Debian distro package. The
included tools might differ from distro to distro, so make part of the tools
optional. The mandatory tools, without which installing OpenSSH fails, are
"sshd" for the server and "ssh" and "scp" for the client.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Add an additional template parameter for SSH support in the container. Currently
this can be implemented using the Dropbear or OpenSSH utility. The respective
tool needs to be available on the host Linux.
If the parameter is omitted, the template will look for the Dropbear utility on
the host and install it if it is available (legacy behavior).
Adding OpenSSH support has been done following the model in the lxc-sshd
template.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>
Otherwise lxc-stop -r has no effect on the container.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
- Implements mixed mode for /sys where it's mounted read-only but with
/sys/devices/virtual/net/ writable.
- Sets lxc.mount.auto to "cgroup:mixed proc:mixed sys:mixed" for all
templates.
- Drop any template-specific mount for /proc, /sys or /sys/fs/cgroup.
- Get rid of the fstab file by default, using lxc.mount.entry instead.
- Set sys:mixed as the default for "sys". sys:mixed is slightly more
permissive than sys:ro so this shouldn't be a problem.
The read-only bind mount of /sys on top of itself is there so that
mountall and other init systems don't attempt to remount /sys
read-write.
v2 changes:
- Fix the mount list, don't specify a source for the remount.
- Update the documentation.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
1. tty5 is not needed
2. the devices should be optional in case they didn't exist in the
host / parent-container
3. switch from 'touch $rootfs/dev/$dev' to using create=file in the
mount entry.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
When running unprivileged, lxc-create will touch a fstab file, with bind-mounts
for the ttys and other devices. Add this entry in the container config.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Apply the changes found in templates/lxc-download to the busybox template as
well. Change ownership of the config and fstab files to the unprivileged user,
and the ownership of the rootfs to root in the new user namespace.
Eliminate the "unsupported for userns" flag.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
For all templates except lxc-ubuntu-cloud and lxc-download, detect not
only --mapped-uid but also --mapped-gid and error out. Detecting will
not be done after -- parameter because of non-option parameters.
Also, change the mode of lxc-archlinux.in 100755 to 100644.
Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>
Only the download and ubuntu-cloud templates work with unprivileged
containers, for all others, detect --mapped-uid and error out as early
as possible, recommending the use of the download template.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
- [[ ]] -> [ ]
- == -> =
- source -> .
- redirect of fd 200 is error in mksh, use fd 9
- &> /dev/null -> > /dev/null 2>&1
- useless function keyword
- echo -e -> printf
still left bash shebang which did not validate with checkbashism, mostly
due 'type' being reported as bashism
Signed-Off-By: Elan Ruusamäe <glen@delfi.ee>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>
- use this in the busybox template since busybox's init expects
to receive SIGUSR1 to halt
- fix lxc.stopsignal to be output by write_config so lxcapi_clone()
and lxcapi_save_config() will output it
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>
Ensure /proc and /sys are mounted in the container, otherwise
apparmor_enabled() will fail to find
/sys/module/apparmor/parameters/enabled
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
1. implement bdev->create:
python and lua: send NULL for bdevtype and bdevspecs.
They'll want to be updated to pass those in in a way that makes
sense, but I can't think about that right now.
2. templates: pass --rootfs
If the container is backed by a device which must be mounted (i.e.
lvm) then pass the actual rootfs mount destination to the
templates.
Note that the lxc.rootfs can be a mounted block device. The template
should actually be installing the rootfs under the path where the
lxc.rootfs is *mounted*.
Still, some people like to run templates by hand and assume purely
directory backed containers, so continue to support that use case
(i.e. if no --rootfs is listed).
Make sure the templates don't re-write lxc.rootfs if it is
already in the config. (Most were already checking for that)
3. Replace lxc-create script with lxc_create.c program.
Changelog:
May 24: when creating a container, create $lxcpath/$name/partial,
and flock it. When done, close that file and unlink it. In
lxc_container_new() and lxcapi_start(), check for this file. If
it is locked, create is ongoing. If it exists but is not locked,
create() was killed - remove the container.
May 24: dont disk-lock during lxcapi_create. The partial lock
is sufficient.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
The patch removes the behavior of automatically mounting /lib
and /usr/lib, since this is duplicated a few lines below. It will
also remove the risk of failing when one of these entries are not
present on the host - e.g. on a 64bit machine.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Don't allow write to /dev/rtc0, and remove sys_time.
Thanks, Christoph.
v2: drop sys_time, sys_module, mac_admin and mac_override in
all templates.
Reported-by: Christoph Mitasch <cmitasch@thomas-krenn.com>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
This patch supports the scenario where a user wants to install a
busybox container on a busybox host.
When running the template, in order to change the root password,
the template needs to do the chroot. On busybox-powered hosts, chroot
is not part of the coreutils package - it's part of busybox. And the
busybox implementation or chroot only works if it has /lib in the new
root populated with the right binaries (or at least that's the
solution I found to make it work).
The temporarily bind-mounts /lib in the NEWROOT, chroots there,
changes the password, goes back and unmounts. This set of operations
is contained in a new MOUNT namespace, using the lxc-unshare call.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
This is for consistency with the rest of lxc, and also because type checks for
shell builtins, a behavior that we do not want in these cases. Ensure stderr
for which is redirected to /dev/null also.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>
Dropbear implements lightweight SSH2 server and client functionality and
is likely to be included in embedded Linux distros.
Signed-off-by: Purcareata Bogdan <B43198@freescale.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>
This commit updates all scripts using mixed indent to a consistent
4 spaces indent.
In the past quite a few of those scripts used tabs to instead of 8 spaces or
instead of 4 spaces, sometimes mixing those in the same line and sometimes
changing the tab width within the same file.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
This updates all the templates and the configuration files to consistently
use "key = value" everywhere.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
I was getting a "Too many links" error when creating a busybox container on
a btrfs file system. This change has the template create the links as
symlinks instead. It also generates the list of commands to be symlinked from
busybox itself instead of a hardcoded list in the template.
Also set the root password to root, to match what other templates do.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>
Both 69d66f1e and f02ce27d added the aa_profile = unconfined hunk, but only
the first was needed, maybe a merge error? The second one causes the
template to get an error on the EOF line. This essentially reverts
f02ce27d.
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Acked-by: Stéphane Graber <stgraber@ubuntu.com>
LXC has optional apparmor support, default profile is lxc-container-default.
This change adds a commented "lxc.aa_profile = default" line to all templates,
uncommenting this will bypass apparmor for the container.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Make 'dir' an explicit backing store type, which accepts '--dir rootfs'
as an option to specify a custom location for the container rootfs. Also
update lxc-destroy to now remove the rootfs separately, as removing
@LXCPATH@/$name may not hit it.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
To make it easier to clone/rename the container, replace hardcoded
entries (with rootfs in the destination path) by rootfs-relative entries.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
LXC has optional apparmor support, default profile is lxc-container-default.
This change adds a commented "lxc.aa_profile = default" line to all templates,
uncommenting this will bypass apparmor for the container.
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
It's possible for only one of /lib64 and /usr/lib64 to exist, so
adding both fstab entries can cause the busybox container to fail
to start.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
