Add support for multiq qdisc
This patch adds the ability to configure the multiq qdisc. Since the qdisc does not require any input it will pull the number of bands directly from the device that it is added to the root of.
usage: tc qdisc add dev <DEV> root handle <HANDLE> multiq
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Provides ability to edit queue_mapping field
Provides ability to edit priority field
usage: action skbedit [queue_mapping QUEUE_MAPPING] [priority PRIORITY]
at least one option must be select, or both at the same time
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
“ip maddr show” on an infiniband address causes a stack corruption
because the length of the address for Infiniband (20 bytes, as
described in kernel doc Documentation/infiniband/ipoib.txt) does not
fit on the 16 bytes of the field in which it gets stored.
The proposed patch increases the size of the hardware address from 4
__u32 to 8 and also adds a check to avoid overriding the available
size while parsing the hardware address.
This bug affects current upstream code AFAICT.
Hope this helps,
Cheers,
Olivier.
“ip maddr show ib0” causes a stack corruption because the length of the address
for Infiniband (20 see kernel doc Documentation/infiniband/ipoib.txt) does not
fit on the 16 bytes of the field in which it gets stored.
The proposed patch increases the size of the hardware address from 4 u32 to 8
and adds a check to avoid overriding the available size while parsing the
hardware address.
This patch adds support for configuring GRE tunnels using the
new rtnl_link interface. This only works on kernels that have
the new GRE configuration interface.
This is accessed through the "ip link" command. The previous
tunnel configuration interface "ip tunnel" remains as it is
and should be retained for compatibility with old kernels.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for configuring GRE tunnels using the
new rtnl_link interface. This only works on kernels that have
the new GRE configuration interface.
This is accessed through the "ip link" command. The previous
tunnel configuration interface "ip tunnel" remains as it is
and should be retained for compatibility with old kernels.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Handle 10/8 as 10.0.0.0/8 and check for bogus values like 256/8.
This is a comprimise between original iproute2 parsing and standard BSD
parsing of abbreviated IPV4 addresses.
This is a variant of Patrick McHardy patch for help text.
Add help for ip link add and ip link delete.
The help conditional on what the kernel supports.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Fix confusing error message noticed by Martin Josefsson:
Fix typo noticed by Phil Oester: information vs. informatin
# ip link add
RTNETLINK answers: Operation not supported
The reason is missing device type information, refuse this and print a message.
Signed-off-by: Patrick McHardy <kaber@trash.net>
For some reason "ip link add help" is currently not supported when using
the new rtnl_link API. Fix that.
Signed-off-by: Patrick McHardy <kaber@trash.net>
This patch allows the user to create/manage AEAD algorithms with
the ip xfrm command. AEAD algorithms are also known as combined-
mode algorithms. They provide the functionality of encryption
algorithms as well as authentication algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When load the tcp_diag module, and use "ss -f inet" command to show the socket
information of inet domain. But this command also shows the information of inet6
domain, but not only inet domain. and "ss -f inet6", "ss -4", "ss -6" have the
same problem.
Signed-off-by: Li Yewang <lyw@cn.fujitsu.com>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
when using the "ss -f inet -t" command to show the tcp socket information of
inet domain, we get the error message: "ss: no socket tables to show with such filter."
This patch can fix this bug.
Signed-off-by: Li Yewang <lyw@cn.fujitsu.com>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Hello Rafael Almeida.
I noticed your patch adding DESTDIR support in the latest iproute2 release.
Much appreciated! Soon the debian packages might be able to move to actually
using "make install" rather then it's own installation procedure when
building packages. I've noticed something that will break though....
Debian packages usually sets DESTDIR=debian/tmp/ and packages the contents
of that directory as if it where the root file system. This will break
the /usr/lib/{tc,ip}/ module loading, because they DESTDIR (/usr) will be
/whatever-the-build-path-was/debian/tmp/lib/{tc,ip}/.
I beleive others usually call this the LIBDIR to make the separation between
DISTDIR being the (possibly temporary) place things are put when build is
done, and LIBDIR (and others) are used for actual runtime paths.
I'm attaching a patch that I think fixes this, but would be really happy if
you could have a look at to verify I'm not screwing something up.
--
Regards,
Andreas Henriksson
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Patch adds generic size table that is similiar to rate table, with
difference that size table stores link layer packet size.
Based on patch by Patrick McHardy
http://marc.info/?l=linux-netdev&m=115201979221729&w=2
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
This is the patch for iproute for configuring GVRP.
commit 32143eed8b706e5c6554ab42903533b3bccdc060
Author: Patrick McHardy <kaber@trash.net>
Date: Thu Jul 3 19:05:09 2008 +0200
[IPROUTE]: iflink_vlan: support GVRP flag
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
On tis, 2008-07-22 at 20:21 +0200, martin f krafft wrote:
> piper:~|master|% sudo ip a flush dev eth0 >/dev/null
> Nothing to flush.
>
> It should just shut up, shouldn't it? :)
The patch below makes the "Nothing to flush" only visible when show
statistics flag is given, and then only to stdout rather then stderr.
$ sudo ./ip/ip -s addr flush dev skif
Nothing to flush.
$ sudo ./ip/ip addr flush dev skif
$
(See http://bugs.debian.org/492196 )
Commit 516ffb6b77 says:
Stephen Hemminger [Thu, 22 May 2008 20:41:40 +0000 (13:41 -0700)]
> Use the standard POSIX inet_pton to convert from string to IPV4
> address. This avoids problems where ip parses "127.2" wrong.
Apparently inet_pton doesn't support abbreviated/shortened/classful
ipv4 addresses at all, but inet_aton does.
Since the function only deals with AF_INET anyway maybe using
inet_aton "to increse backwards compatability" (please those
who still want to use the format) could be considered?
(This will still not restore the 10/8 format which apparently used
to work in iproute, so people would have to settle for 10.0/8)
(See http://bugs.debian.org/497011)
Fix syntax errors in ip(8) manpage.
lintian said:
W: iproute: manpage-has-errors-from-man usr/share/man/man8/ip.8.gz 2167: warning: `RP' not defined
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
After changing the DESTDIR the installated binaries have some issues
due to hard coded paths. For example, using distributions on NetEm
would segfault.
I've changed iplink.c and tc_util.c so they are now aware of DESTDIR.
Along with that change I needed to change the main Makefile so it
defines the DESTDIR macro when calling gcc.
I also changed the paths so that during the installation sbin, etc,
share and lib directories are created directly inside of the DESTDIR,
instead of creating a usr directory inside that. That's the behaviour
of most packages out there, so I think most users will be expecting
that to happen.
The command "ip addrlabel add/del" displays incorrect error message when provided with insufficient inputs. This patch fixes it in par with "ip addr add/del".
Currently:
# ./ip addrlabel add
RTNETLINK answers: Numerical result out of range
# ./ip addr add
Not enough information: "dev" argument is required.
After patch:
# ./ip addrlabel add
Not enough information: "prefix" argument is required.
Signed-off-by: Varun Chandramohan <varunc@linux.vnet.ibm.com>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
The current kernel generates 71 possible header fields, but
MAX_FIELDS in lnstat is only 64. This leads to referencing outside
of the array. To fix, increase size of array and chop off parsing
at MAX_FIELDS - 1.
Fix a bug of generic_proc_open(), so environment variables
(e.g. PROC_NET_SNMP, PROC_NET_RTACCT) can be used to specify procfile.
Signed-off-by: Yu Zhiguo <yuzg@cn.fujitsu.com>
The programs in netem are compiled and run on the build machine, but they
use the CFLAGS that are meant for the target system and often times, these
are incompatible.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Hi Stephen,
I resend you this patch once more. This time I updated the documentation
too (may be that was the reason why you didn't take it before?).
Please tell me if there are other things missing in this patch
It applies on iproute2 git tree.
Regards,
Benjamin
Description:
------------
This patch adds support for the IFLA_NET_NS_PID type. It is used to
move network devices between network namespaces.
The syntax is:
ip link set DEVICE netns PID
PID is the pid of a process in the target network namespace.
(Daniel Lezcano is the original author).
Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
> # tc filter show dev eth1 | grep 4:29:d1
> filter parent 1: protocol ip pref 5 u32 fh 4:29:d1 order 209 key ht 4
> bkt 29 flowid 1:b7aa
>
> # tc filter del dev eth1 parent 1: pref 5 handle 4:29:d1 u32
> RTNETLINK answers: Invalid argument
> We have an error talking to the kernel
>
> after rollback to package"sys-apps/iproute2-2.6.24.20080108" all
> deleted normal...
The current iproute version uses "protocol all" by default
if its not specified. This is actually only useful for creating
new filters, on deletion an unset protocol is treated as wildcard.
The function get_hz() returns the psched hz value which is wrong
for anything other than tc usage. Should be user hz instead, but
kernel is broken (patch sent) and this code doesn't get hit on
current systems (netlink is used first).
Hi Stephen:
[IP] xfrm: Allow replay setting
For certain applications there is a requirement to start the
sequence number from a point other than the default. As it
is the kernel provides an interface to do that but it isn't
available through the ip(8) command. Since we're encouraging
people to migrate over to ip(8) for manual keying, it is useful
to have this ability there.
This patch adds support for setting replay sequence numbers
through ip(8).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thanks,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
--
