Make printing of multipath attributes a function to improve
readability.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since these fields are printed in both route and multipath case;
avoid duplicating code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make a separate function to improve readability and enable
easier JSON conversion.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make common function for decoding cacheinfo.
This code may print more info than old version in some cases.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Refactor to reduce size of print_route and improve
readability.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Both next hop and route need to decode flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
We have helper routines to support nested attribute addition into
netlink buffer: use them instead of open coding.
Use addattr_nest_compat()/addattr_nest_compat_end() where appropriate.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
1) Rename @hdr parameter to @n to be coherent with rest of the parsing
code.
2) Use NLMSG_DATA() to get pointer to the data after nlmsghdr instead
of calculating it directly in ip/tunnel code.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Having iplink_parse() and @struct iplink_req in include/utils.h does not
reflect it's IP nature: move to ip/ip_common.h.
Move contents of ip/iplink_xdp.h and ip/iproute_lwtunnel.h to
ip/ip_common.h since they are small (i.e. only two function prototypes):
ip/iplink_bridge.c and ip/iplink_vrf.c prototypes already there.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This reverts commit 63891c7013.
It seems print_linkinfo_brief() never accepts filter different than
default one and David Ahern suggests to revert it instead of making
new change that actually do revert.
Conflicts:
ip/ipaddress.c
ip/iplink.c
These are caused by JSON support addition after commit we reverting.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Non-JSON tc qdisc output used to print the "requeues" statistic
twice. Commit 4fcec7f366 ("tc: jsonify stats2") tried to preserve
this behaviour for both standard output and JSON, but used the wrong
statistic (q.qlen). Also duplicating keys in JSON is not allowed,
so the second occurrence should be completely skipped with JSON.
Fixes: 4fcec7f366 ("tc: jsonify stats2")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The JSON object name for statistics in ip link show is "stats644".
Looks like a typo, commit d0e720111a ("ip: ipaddress.c: add support
for json output") contains an example with the expected "stats64" name.
The fact that no one has noticed until now is probably an indication
that no one is using this object. Hopefully it's not too late to fix
this, although IIUC this has already been in 4.13 and 4.14 releases :S
Fixes: d0e720111a ("ip: ipaddress.c: add support for json output")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Make JSON output work with prio Qdiscs. This will also make
other qdiscs which reuse the print_qopt work, like mqprio or
pfifo_fast.
Note that there is a double space between "priomap" and first
prio number. Keep this original behaviour.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make JSON output work with RED Qdiscs. Float/double printing
helpers have to be added/uncommented to print the probability.
Since TC stats in general are not split out to a separate object
the xstats printed by this patch are not separated either.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Serhey Popovych says:
====================
Now we enhance get_addr() to return additional information about address
(e.g. if it unspecified or multicast) we want to have same functionality
for attributes in netlink message.
Introduce and use get_addr_rta() that parses given netlink attribute
into @inet_prefix data structure in the same way similar get_addr()
parses address from it's string representation.
Use attribute length to guess address family: force it by giving non
AF_UNSPEC @family to get_addr_rta() to ensure address is of expected
family.
Introduce and use inet_addr_match_rta() to further simplify and unify
code where get_addr_rta() intended to be used together with
inet_addr_match().
This is next step in ipv4 and ipv6 modules unification to prepare for
merge in the future.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
Introduce and use tnl_print_endpoint() helper to print of tunnel
endpoint address.
Note that for AF_INET and AF_INET6 inet_ntop(3) is used that may return
NULL in case of failure and while unlikely format_host_rta() might
return NULL too. Handle this case when passing local/remote to
print_string().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there remove & from inet_prefix.data when since it is array.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While there check return from get_prefix() for filter address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
First is used to get address from netlink attribute to
inet_prefix data structure. Use memcpy() with constant
value to let complier optimize by replacing a call by
inlining load/store instructions.
Second is used to match address in given netlink attribute
with one given as reference. It matches successfully if
no attribute is given (@rta is NULL), reference address
family is AF_UNSPEC or it's length isn't given; fails if
get_attr_rta() can't get attribute or it's family does
not match reference; calls inet_addr_match() to get final
verdict.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Serhey Popovych says:
====================
With this series I want to unify collect metadata
handling in tunnels:
1) Use "external" name for JSON and non-JSON output.
Do not *print* any options when tunnel in
collect metadata mode: gre6 already do
this, so just apply to others.
2) Do not *add* any attributes when configuring
gre tunnel in collect metadata mode.
Other tunnels (e.g. gre6, iptnl, ip6tnl)
alredy do that.
This is next step in ipv4 and ipv6 modules
unification to prepare for merge in the future.
Any comments, suggestions and criticism as always
welcome.
v2
For all tunnels implementing collect metadata
use "external" keyword for both JSON. Thanks
to Jiri Benc for detailed explanation.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
There are couple of minor improvements:
1) Check erspan_ver == 2 in gre6. It still could
be 1 if erspan_idx is 0.
2) Add tunnel encapsulation attributes only when
collect metadata not in effect in gre.
3) Trivial: address checkpatch issues.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Print only "external" if collect meta data attribute
is given: rest of parameters are irrelevant. This is
to follow gre6.
For both JSON and non-JSON output use "external" for
all tunnels including vxlan and geneve.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The lexer will go with the longest match, so previously
the starting double quotes of a string would be swallowed by
the [^ \t\r\n()]+ pattern leaving the user no way to
actually use strings with escape sequences.
Fix this by not allowing this case to start with double
quotes.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
While benefit from using ll_name_to_index() with populated
cache can potentially be exploited only in few places
(e.g. bridge fdb/mdb/vlan show routines) there is another
advantage of ll_name_to_index() over plain if_nametoindex():
in case of if_nametoindex() failure ll_name_to_index()
will attempt to get index from common name in form "if%d"
that may be returned from ll_index_to_name().
This makes output from ip(8) coherent with it's input.
Note that most of the code already switched from plain
if_nametoindex() to ll_name_to_index() to cached variant.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In prepare of link_vti.c and link_vti6.c merge:
1) Make @fwmark of __u32 type instead of unsigned int
in vti to match with rest tunneling code.
2) Report when unable to translate @link network device
name to index instead of silently exiting in vti6.
3) Remove newline separating local/remote attributes
from the ikey/okey in vti6 to match vti module.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Handle "inherit" case properly for gre6 and ip6tnl.
Use get_u8() in gre to parse ttl/hoplimit.
Be consistent about "hlim" alias to ttl/hoplimit
support.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Few minor changes after merge of 'master' into 'net-next' branch:
1) Follow 80 line length for printing erspan_index parameter
as we did in master with commit 2a8d0f6e9c ("gre/tunnel:
Print erspan_index using print_uint()").
2) Remove remnants of encapsulation option printing: now it
is done using tnl_print_encap() helper in commit bad76e6b1f
("ip/tunnel: Abstract tunnel encapsulation options printing").
Fixes: 8c75f69411 ("Merge branch 'master' into net-next")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Jiri Pirko says:
====================
From: Jiri Pirko <jiri@mellanox.com>
Kernel allows to share all filters between qdiscs with use
of shared block.
Example:
block number 22. "22" is just an identification:
$ tc qdisc add dev ens7 ingress_block 22 ingress
^^^^^^^^^^^^^^^^
$ tc qdisc add dev ens8 ingress_block 22 ingress
^^^^^^^^^^^^^^^^
If we don't specify "block" command line option, no shared block would
be created:
$ tc qdisc add dev ens9 ingress
Now if we list the qdiscs, we will see the block index in the output:
$ tc qdisc
qdisc ingress ffff: dev ens7 parent ffff:fff1 ingress_block 22
qdisc ingress ffff: dev ens8 parent ffff:fff1 ingress_block 22
qdisc ingress ffff: dev ens9 parent ffff:fff1
To make is more visual, the situation looks like this:
ens7 ingress qdisc ens7 ingress qdisc
| |
| |
+----------> block 22 <----------+
Unlimited number of qdiscs may share the same block.
Block sharing is also supported for clsact qdisc:
$ tc qdisc add dev ens10 ingress_block 23 egress_block 24 clsact
$ tc qdisc show dev ens10
qdisc clsact ffff: dev ens10 parent ffff:fff1 ingress_block 23 egress_block 24
We can add filter using the block index:
$ tc filter add block 22 protocol ip pref 25 flower dst_ip 192.168.0.0/16 action drop
Note we cannot use the qdisc for filter manipulations of shared blocks:
$ tc filter add dev ens8 ingress protocol ip pref 1 flower dst_ip 192.168.100.2 action drop
Error: This filter block is shared. Please use the block index to manipulate the filters.
We will see the same output if we list filters for ingress qdisc of
ens7 and ens8, also for the block 22:
$ tc filter show block 22
filter protocol ip pref 25 flower chain 0
filter protocol ip pref 25 flower chain 0 handle 0x1
...
$ tc filter show dev ens7 ingress
filter block 22 protocol ip pref 25 flower chain 0
filter block 22 protocol ip pref 25 flower chain 0 handle 0x1
...
$ tc filter show dev ens8 ingress
filter block 22 protocol ip pref 25 flower chain 0
filter block 22 protocol ip pref 25 flower chain 0 handle 0x1
...
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
During qdisc creation it is possible to specify shared block for bot
ingress and egress. Pass this values to kernel according to the command
line options.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
So far, qdisc was the only handle that could be used to manipulate
filters. Kernel added support for using block to manipulate it. So add
the support to use block index to manipulate filters. The magic
TCM_IFINDEX_MAGIC_BLOCK indicates the block index is in use.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This hepler used qdisc dump to list all qdisc and find if block index in
question is used by any of them. That means the block with specified
index exists.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Serhey Popovych says:
====================
It looks confusing to have multiple independent
routines to get internet address from it's string
representation: get_addr() and inet_get_addr().
Most complicated users of inet_get_addr() is
iplink_geneve.c and iplink_vxlan.c because they
required to handle both AF_INET and AF_INET6
for their local/remote endpoints.
On the other hand get_addr() does not provide
additional information like address type: need
to address this. to get rid of current and
possible future code duplications. Note that
this functionality is first step to make proto
independent handling of local/remote endpoints
in ip/tunnel code (there will be additional
series based on this one).
Also fix get_addr_1() and get_prefix() to make
sure it always provide correct ->family and
->bitlen.
As always comments, suggestions and criticism
are welcome.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
Both geneve and vxlan modules are converted to
use get_addr() we can replace inet_get_addr()
in less problematic places and finally get
rid of inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Now we have additional information about address
class from get_addr() we can use it in place of
inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Now we have additional information about address
class from get_addr() we can use it in place of
inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
It looks very useful to receive additional information
from get_addr_1() and get_addr() about address to simplify
caller and get rid of code duplications.
For now following information can be returned:
1) address is unspecified (zero)
2) address is multicast
3) address is internet: family is either AF_INET or
AF_INET6.
More information can be added in the future.
Introduce inline helpers to make code using this new
address classification interface more self explaining:
bool is_addrtype_inet(inet_prefix *addr)
true if @addr is inet address
bool is_addrtype_inet_unspec(inet_prefix *addr)
true if @addr is unspecified inet address
bool is_addrtype_inet_multi(inet_prefix *addr)
true if @addr is multicast inet address
bool is_addrtype_inet_not_unspec(inet_prefix *addr)
true if @addr is not unspecified inet address
false if @addr is not inet or unspecified inet
bool is_addrtype_inet_not_multi(inet_prefix *addr)
true if @addr is not multicast inet address
false if @addr is not inet or multicast inet
Last two are useful for case when we need inet address
that is not unspecified or multicast.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Handle default/all/any special case in get_addr_1() to setup
->family and ->bytelen correctly.
Make get_addr_1() return ->bitlen == -2 instead of -1 to
distinguish default/all/any special case from the rest:
it is safe because all callers check ->bitlen < 0, not
explicit value -1.
Reduce intendation by one level and get rid of goto/label
to make code more readable.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Set ->family correctly when string representing address
is "default", "all" or "any": get_addr_1() might be called
with AF_UNSPEC (e.g. get_addr() -> get_addr_1()).
Extend support for zero address to all address families,
not only AF_INET and AF_INET6 when one explicitly given
as @family: use af_byte_len() to correctly set address length.
Still assume AF_INET when @family is AF_UNSPEC.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
When program is loaded with a specified ifindex, use that
ifindex also when creating maps.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
