Introduce classifying by metadata extracted by the tunnel device.
Outer header fields - source/dest ip and tunnel id, are extracted from
the metadata when classifying.
For example, the following will add a filter on the ingress Qdisc of shared
vxlan device named 'vxlan0'. To forward packets with outer src ip
11.11.0.2, dst ip 11.11.0.1 and tunnel id 11. The packets will be
forwarded to tap device 'vnet0':
$ tc filter add dev vxlan0 protocol ip parent ffff: \
flower \
enc_src_ip 11.11.0.2 \
enc_dst_ip 11.11.0.1 \
enc_key_id 11 \
dst_ip 11.11.11.1 \
action mirred egress redirect dev vnet0
Signed-off-by: Amir Vadai <amir@vadai.me>
This is needed for some HWs to do proper macthing and steering.
Possible values are none, link, network, transport.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Add missing usage help for devlink dev eswitch subcommand.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Adjusting iproute2 utility to support new macvlan link type mode called
"source".
Example of commands that can be applied:
ip link add link eth0 name macvlan0 type macvlan mode source
ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr del 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr flush
ip -details link show dev macvlan0
Based on previous work of Stefan Gula <steweg@gmail.com>
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Cc: steweg@gmail.com
v5:
- rebase and fix checkpatch
v4:
- add MACADDR_SET support
- skip FLAG_UNICAST / FLAG_UNICAST_ALL as this is not upstream
- fix man page
This makes use of the sctp_diag interface recently added to the kernel.
Joint work with Xin Long who provided the PoC implementation which I
merely polished up a bit.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Remove left over usage from removal of eth_type argument.
Fixes: 488b41d020 ('tc: flower no need to specify the ethertype')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
So far, only the 'egress' direction was implemented.
Allow specifying 'ingress' as the direction packet appears on the target
interface.
For example, this takes incoming 802.1q frames on veth0 and redirects
them for input on dummy0:
# tc filter add dev veth0 parent ffff: pref 1 protocol 802.1q basic \
action mirred ingress redirect dev dummy0
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Recently a new per-port flag was added which controls the flooding of
unknown multicast, this patch adds support for controlling it via iproute2.
It also updates the man pages with information about the new flag.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Add support for controling hardware offload using (now standard)
skip_sw and skip_hw flags in cls_bpf.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Adjusting iproute2 utility to support new macvlan link type mode called
"source".
Example of commands that can be applied:
ip link add link eth0 name macvlan0 type macvlan mode source
ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr del 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr flush
ip -details link show dev macvlan0
Based on previous work of Stefan Gula <steweg@gmail.com>
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Cc: steweg@gmail.com
Introduce a new API that exposes a list of vlans per VF (IFLA_VF_VLAN_LIST),
giving the ability for user-space application to specify it for the VF as
an option to support 802.1ad (VST QinQ).
We introduce struct vf_vlan_info, which extends struct vf_vlan and adds
an optional VF VLAN proto parameter.
Default VLAN-protocol is 802.1Q.
Add IFLA_VF_VLAN_LIST in addition to IFLA_VF_VLAN to keep backward
compatibility with older kernel versions.
Suitable ip link tool command examples:
- Set vf vlan protocol 802.1ad (S-TAG)
ip link set eth0 vf 1 vlan 100 proto 802.1ad
- Set vf vlan S-TAG and vlan C-TAG (VST QinQ)
ip link set eth0 vf 1 vlan 100 proto 802.1ad vlan 30 proto 802.1Q
- Set vf to VST (802.1Q) mode
ip link set eth0 vf 1 vlan 100 proto 802.1Q
- Or by omitting the new parameter (backward compatible)
ip link set eth0 vf 1 vlan 100
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
The 'vlan modify' action allows to replace an existing 802.1q tag
according to user provided settings.
It accepts same arguments as the 'vlan push' action.
For example, this replaces vid 6 with vid 5:
# tc filter add dev veth0 parent ffff: pref 1 protocol 802.1q \
basic match 'meta(vlan mask 0xfff eq 6)' \
action vlan modify id 5 continue
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Hi,
On Thu, Sep 08, 2016 at 11:59:55AM +0200, Michal Kubecek wrote:
> On Thu, Sep 01, 2016 at 09:04:54AM -0700, Stephen Hemminger wrote:
> > On Tue, 30 Aug 2016 17:32:52 -0700
> > Iskren Chernev <iskren@imo.im> wrote:
> >
> > > From 416f45b62f33017d19a9b14e7b0179807c993cbe Mon Sep 17 00:00:00 2001
> > > From: Iskren Chernev <iskren@imo.im>
> > > Date: Tue, 30 Aug 2016 17:08:54 -0700
> > > Subject: [PATCH bug-fix] iproute: fix documentation for ip rule scan order
> > >
> > > ---
> > > man/man8/ip-rule.8 | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/man/man8/ip-rule.8 b/man/man8/ip-rule.8
> > > index 1774ae3..3508d80 100644
> > > --- a/man/man8/ip-rule.8
> > > +++ b/man/man8/ip-rule.8
> > > @@ -93,7 +93,7 @@ Each policy routing rule consists of a
> > > .B selector
> > > and an
> > > .B action predicate.
> > > -The RPDB is scanned in order of decreasing priority. The selector
> > > +The RPDB is scanned in order of increasing priority. The selector
> > > of each rule is applied to {source address, destination address,
> > > incoming
> > > interface, tos, fwmark} and, if the selector matches the packet,
> > > the action is performed. The action predicate may return with success.
> > > --
> > > 2.4.5
> >
> > Applied
>
> I'm sorry I didn't notice before but this just reverts the change done
> by commit 4957250166 ("iproute2: clarification of various man8 pages").
> IMHO the problem is that both versions are equally confusing as the word
> "priority" can be understood in two different senses.
>
> How about more explicit formulation, e.g.
>
> ... in order of decreasing logical priority (i.e. increasing numeric
> values).
>
> Would that be better?
Looks like the real issue is missing definition of priority. What about
this:
use get_be64() in place of get_u64() when parsing input 'sci' parameter,
so that 'sci' can be entered using network byte order regardless the
endianness of target system; use ntohll() when printing out 'sci'. While
at it, improve documentation of 'sci' in ip-link.8.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
remove hardcoded base 10 parsing of 'port' parameter, update man page
and fix usage() functions as well. Fix misleading line in man page that
theoretically allowed specifying 'port' keyword right after 'sci' keyword.
Provide documentation of 'address' parameter in man pages and in usage()
functions as well.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
The current vlan push action supports only vid and protocol options.
Add priority option.
Example script that adds vlan push action with vid and priority:
tc filter add dev veth0 protocol ip parent ffff: \
flower \
indev veth0 \
action vlan push id 100 priority 5
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Classification according to vlan id and vlan priority.
Example script that adds vlan filter:
# add ingress qdisc
tc qdisc add dev ens4f0 ingress
# add a flower filter with vlan id and priority classification
tc filter add dev ens4f0 protocol 802.1Q parent ffff: \
flower \
indev ens4f0 \
vlan_ethtype ipv4 \
vlan_id 100 \
vlan_prio 3 \
action vlan pop
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
In addition to providing information about the mathcall filter and its
configurations, the man entry contains examples for creating port
mirorring entries.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
In this patch we introduce the ability to get UDP specific bearer
options such as remoteip, remoteport, localip and localport.
After some discussions on tipc-discussion on how to handle media
specific options we agreed to pass them after the media.
For media generic bearer options we already do:
$ tipc bearer get OPTION media MEDIA name|device NAME|DEVICE
For the UDP media specific bearer options we introduce in this path:
$ tipc bearer get media udp name NAME OPTION
such as
$ tipc bearer get media udp name NAME remoteip
This allows bash-completion to tab complete only appropriate options,
it makes more logical sense and it scales better. Even though it might
look a little different to the user.
In order to use the existing option parsing framework to do this we
add a flag (OPT_KEY) to the option parsing function.
If the UDP bearer has multiple remoteip addresses associated with it
(replicast) we handle the TIPC_NLA_UDP_MULTI_REMOTEIP flag and send
a TIPC_NL_UDP_GET_REMOTEIP query transparently to the user.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Introduce the ability to add remote IP addresses to an existing UDP
bearer. On the kernel side, adding a "remoteip" to an existing bearer
puts the bearer in "replicast" mode where TIPC multicast messages are
send out to each configured remoteip using unicast. This is required
for TIPC UDP bearers to work in environments where IP multicast is
disabled.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Implement kernel devlink e-switch interface. Currently we allow
to get and set the device e-switch mode.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
This patch adds support for the stats argument to the bridge
vlan command which will display the per-vlan statistics and the device
each vlan belongs to with its flags. The supported command filtering
options are dev and vid. Also the man page is updated to explain the new
option.
The patch uses the new RTM_GETSTATS interface with a filter_mask to dump
all bridges and ports vlans. Later we can add support for using the
per-device dump and filter it in the kernel instead.
Example:
$ bridge -s vlan show
port vlan id
br0 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
eth1 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
100
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
102
RX: 16897 bytes 93 packets
TX: 0 bytes 0 packets
The format is the same as bridge vlan show but with stats, even though
under the hood the calls done to the kernel are different.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This enables a user to remove an offline peer from the kernel data
structures. This could for example be useful when deliberately scaling
in peer nodes in a cloud environment.
This functionality was first merged in:
f9dec657e4 (Richard Alpe tipc: add peer remove functionality)
And later backed out (as the kernel counterpart was held up) in:
385caeb13b (Stephen Hemminger Revert "tipc: add peer remove functionality")
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Local ip is not required to identify a UDP bearer and shouldn't be
passed to bearer disable, set or get. In this patch we remove the
localip entry from the synopsis of these functions.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
This adds missing documentation of geneve type options:
- dstport
- external
- udpcsum
- udp6zerocsumtx
- udp6zerocsumrx
The bits for the last three was just copy and pasted from vxlan section.
Signed-off-by: Phil Sutter <phil@nwl.cc>
since kernel driver has valid default values for 'cipher' and 'icvlen',
there is no need for requiring users to specify both of them when a new
link is added. Also, prompt an error message and exit with appropriate
exit status in case of unsupported cipher suite.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
fix output of "ip address help" and "ip link help". Update TYPE list in man
pages ip-address.8 and ip-link.8 as well.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
- baseclass: major handle must match that of class's, Y defaults to 1
- flow map example: maps to 1-256, not 1-257
Signed-off-by: Michal Soltys <soltys@ziu.info>
Description copied from related kernel support commit message with a
little tailoring to fit.
While at it, fix font of non-terminal CONFFLAG-LIST in synopsis.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This moves the warning to the beginning of the section about 'ip link
set' which makes it still stand out after adding more text to it's end.
Signed-off-by: Phil Sutter <phil@nwl.cc>
'ip link set' supports passing a type to set type-specific parameters.
Add this missing piece of information to the synopsis section.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Add option to suppress header line. When used the following line
is not shown:
"State Recv-Q Send-Q Local Address:Port Peer Address:Port"
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add two NLA's that allow configuration of Infiniband node or port GUIDs
by referencing the IPoIB net device set over the physical function. The
format to be used is as follows:
ip link set dev ib0 vf 0 node_guid 00:02:c9:03:00:21:6e:70
ip link set dev ib0 vf 0 port_guid 00:02:c9:03:00:21:6e:78
Signed-off-by: Eli Cohen <eli@mellanox.com>
Add vrf keyword to 'ip route' commands. Allows:
1. Users can list routes by VRF name:
$ ip route show vrf NAME
VRF tables have all routes including local and broadcast routes.
The VRF keyword filters LOCAL and BROADCAST routes; to see all
routes the table option can be used. Or to see local routes only
for a VRF:
$ ip route show vrf NAME type local
2. Add or delete a route for a VRF:
$ ip route {add|delete} vrf NAME <route spec>
3. Do a route lookup for a VRF:
$ ip route get vrf NAME ADDRESS
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add vrf keyword to 'ip neigh' commands. Allows listing neighbor
entries for all links associated with a given VRF.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add vrf keyword to 'ip link' and 'ip addr' commands (common list code).
Allows:
1. Adding a link to a VRF
$ ip link set NAME vrf NAME
Removing a link from a VRF still uses 'ip link set NAME nomaster'
2. Showing links associated with a VRF:
$ ip link show vrf NAME
3. List addresses associated with links in a VRF
$ ip -br addr show vrf red
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
On devices that support TC flower offloads, these flags enable a filter to be
added only to HW or only to SW. skip_sw and skip_hw are mutually exclusive
flags. By default without any flags, the filter is added to both HW and SW,
but no error checks are done in case of failure to add to HW.
With skip-sw, failure to add to HW is treated as an error.
Here is a sample script that adds 2 filters, one with skip_sw and the other
with skip_hw flag.
# add ingress qdisc
tc qdisc add dev enp0s9 ingress
# enable hw tc offload.
ethtool -K enp0s9 hw-tc-offload on
# add a flower filter with skip-sw flag.
tc filter add dev enp0s9 protocol ip parent ffff: flower \
ip_proto 1 indev enp0s9 skip_sw \
action drop
# add a flower filter with skip-hw flag.
tc filter add dev enp0s9 protocol ip parent ffff: flower \
ip_proto 3 indev enp0s9 skip_hw \
action drop
Signed-off-by: Amir Vadai <amirva@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
I'll make a formal submission sans the header when the kernel patches
makes it in. This version is for someone who wants to play around with
the net-next kernel patches i sent
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Doc text shamelessly stolen from the introducing commit's message
(6c55c8c461 ['ip link set vf: Added "query_rss" command']).
Signed-off-by: Phil Sutter <phil@nwl.cc>
Not sure why this was limited to ip-link before. It is semantically
equal to the 'master' keyword, which is not restricted at all.
The man page and help text adjustments include the 'master' keyword as
well since that is also supported but wasn't documented before.
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
This resolves what appears to be a typo.
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Extend ip-link to create MACsec devices
ip link add link <master> <macsec> type macsec [options]
Add `ip macsec` command to configure receive-side secure channels and
secure associations within a macsec netdevice.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Phil Sutter <phil@nwl.cc>
This patch drops the redundant description of some of ip's options in
ip-link.8's description of the 'show' subcommand, preserving the
description of -iec (but appending it to the list in ip.8 with minor
fixes).
Signed-off-by: Phil Sutter <phil@nwl.cc>
Follow-up for kernel commit 8eb3b99554b8 ("geneve: support setting
IPv6 flow label") to allow setting the label for the device config.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Follow-up for kernel commit e7f70af111f0 ("vxlan: support setting
IPv6 flow label") to allow setting the label for the device config.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This should be made generic and part of a common tc-actions man page.
Though leave it here for now to not confuse readers of the example which
uses it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As Jamal pointed out, there are two different approaches to bandwidth
measurement. Try to make this clear by separating them in synopsis and
also documenting the way to fine-tune avrate.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As Jamal suggested, BRANCH is the wrong name, as these keywords go
beyond simple branch control - e.g. loops are possible, too. Therefore
rename the non-terminal to CONTROL instead which should be more
appropriate.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Recently a new temp router port mode was added and with it the dumped
information was extended similar to how mdb entries were done. This
patch adds support to dump the new information by using the "-s" switch.
Example:
$ bridge -d -s mdb show
dev br0 port eth1 grp ff02::1:ffbf:5716 temp 234.39
dev br0 port eth1 grp 239.0.0.2 temp 97.17
dev br0 port eth1 grp 239.0.0.3 temp 105.36
router ports on br0: eth1 0.00 permanent
router ports on br0: eth2 254.87 temp
It also updates the bridge man page.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Not sure how useful they are in practice, but as 'ip neigh' supports
setting them all, they deserve to be described as well.
While at it, also add a missing layer of indentation to the subordinate
nud state list.
Signed-off-by: Phil Sutter <phil@nwl.cc>
The documentation is wrong here: it is indeed possible to remove policy
rule 0 and recreate it afterwards. Therefore remove these statements.
Signed-off-by: Phil Sutter <phil@nwl.cc>
While the synopsis section contains 'ip route list', it is later
described as 'ip route show'. Make this consistent by replacing 'list'
with 'show' in synopsis.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Listing generic 'ip' options in subcommand man pages is redundant and
error-prone, as they won't be kept in sync anyway. Since many other man
pages don't list them either, drop references to them in the remaining
ones.
Signed-off-by: Phil Sutter <phil@nwl.cc>
The 'ADDR' part of 'local' and 'remote' parameters is not optional, but
may also consist of the word 'any'. While at it, add missing whitespace
and fix fonts.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Drop unnecessary curly braces around single action keywords, point out
that 'dev' parameter to 'ip token get' is optional and clarify that 'ip
token' defaults to 'list' action.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Clarify that 'ip rule' defaults to action 'list', that 'flush' and
'save' actions don't accept additional parameters, add missing 'not' and
'goto' keywords and finally fix fonts used in 'fwmark' and 'realms'
parameters.
Signed-off-by: Phil Sutter <phil@nwl.cc>
The first line contained a c'n'p error, incorrectly listing 'ip address'
syntax. Since PARAMS is used just once and there are not many other
parameters to 'ip ntable change', state them inline and in addition to
that clarify the possibility to pass multiple parameters at once.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Use brackets to show that 'ip netns' defaults to action 'list', drop
superfluous curly braces around 'set' action keyword.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reflect that it is possible to pass multiple parameters at the same
time, also use the same trick the help text uses to emphasize vf
specific parameters.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Clarify that the optional '-' prefix of the 'tentative', 'deprecated'
and 'dadfailed' keywords has to be put right in front of them, no
whitespace is allowed in between.
In addition to that, clarify that it is valid to pass both 'valid_lft'
and 'preferred_lft' at the same time to 'ip address'.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Recently support was added to the kernel to be able to add more per-mdb
entry attributes via standard netlink attributes of type MDBA_MDB_EATTR_.
This patch adds support to iproute2 to parse and output these
attributes. The first exported attribute is the mdb "timer" value which
is shown only when the "-s" iproute2 arg is used.
Example:
$ bridge -s mdb show
dev br0 port eth1 grp 239.0.0.11 permanent 0.00
dev br0 port eth1 grp 239.0.0.10 temp 244.15
dev br0 port eth1 grp 239.0.0.1 temp 245.21
dev br0 port eth1 grp 239.0.0.5 temp 246.43
dev br0 port eth2 grp 239.0.0.5 temp 248.44
dev br0 port eth1 grp 239.0.0.2 temp 245.32
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Add IFLA_VF_TRUST message to trust the VF.
PF can accept some privileged operation from the trusted VF.
For example, ixgbe PF doesn't allow to enable VF promiscuous mode until
the VF is trusted because it may hurt performance.
To trust VF.
# ip link set dev eth0 vf 1 trust on
To untrust VF.
# ip link set dev eth0 vf 1 trust off
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
This patch is a follow up to the recently added
'static' fdb option.
It introduces a new option 'dynamic' which adds
dynamic fdb entries with NUD_REACHABLE.
$bridge fdb add 00:01:02:03:04:06 dev eth0 master dynamic
$bridge fdb show
00:01:02:03:04:06 dev eth0
This patch also documents all fdb types. Removes 'temp'
from usage message since it is now replaced by 'static'.
'temp' still works and is synonymous with static.
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
This patch adds a -K / --kill option to ss that attempts to
forcibly close matching sockets using SOCK_DESTROY.
Because ss typically prints sockets instead of acting on them,
and because the kernel only supports forcibly closing some types
of sockets, the output of -K is as follows:
- If closing the socket succeeds, the socket is printed.
- If the kernel does not support forcibly closing this type of
socket (e.g., if it's a UDP socket, or a TIME_WAIT socket),
the socket is silently skipped.
- If an error occurs (e.g., permission denied), the error is
reported and ss exits.
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
grff wrapper returns warnings when parsing the ip-link.8.in file.
How to reproduce:
$ man --warnings ip-link > /dev/null
`R' is a string (producing the registered sign), not a macro.
[...]
Signed-off-by: Thomas Faivre <thomas.faivre@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Options 'group' and 'remote' cannot take 'any' as value but 'local' can.
Signed-off-by: Thomas Faivre <thomas.faivre@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This enables a user to remove an offline peer from the kernel data
structures. This could for example be useful when deliberately scaling
in peer nodes in a cloud environment.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
This enables a user to remove an offline peer from the kernel data
structures. This could for example be useful when deliberately scaling
in peer nodes in a cloud environment.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Despite commit 45a82e5 ("iproute vxlan add support for fdb replace
command"), the 'fdb replace' command was not mentioned in bridge.8.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This patch adds save and restore commands to "ip rule"
similar the same is made in commit f4ff11e3e2 for "ip route".
The feature is useful in checkpoint/restore for container
migration, also it may be helpful in some normal situations.
Signed-off-by: Kirill Tkhai <ktkhai@odin.com>
This has been inconsistent since the beginning of Git and seems to be
merely a documentation leftover, therefore just remove it from help
output and man page.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This patch updates ip-route man page with lwtunnel encap
usage and description, covering MPLS and IP encapsulation.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Jiri Benc <jbenc@redhat.com>
This patch adds support to batch bridge commands.
Follows ip batch code.
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Christophe Gouault <christophe.gouault@6wind.com>
This patch adds man pages for the TIPC tool. There is one main page
and one page for each top level sub-command. These pages mainly aims
to help a user of the tipc tool. In addition to this they describe
a bit about what TIPC is and some of its features as a protocol.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Partially based on kernel Kconfig help text, code comments and
git commit messages from Eric Dumazet.
Joint work with Phil Sutter.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Some qdiscs still lack a manpage, so listing them here is the only way
for a user to get to know them. For the others, this serves as an
overview of what is there.
Content was taken over from the dedicated manpage if available and
suitable, so there is definitely room for improvement at least by
adjusting it more to the context in which it is now. In case there
wasn't appropriate wording available, I tried to identify key aspects of
the given qdisc.
Signed-off-by: Phil Sutter <phil@nwl.cc>
While there is not much to explain about this rather trivial shell
script, having a manpage for it serves as good point of reference for
users wondering what it might be for.
Signed-off-by: Phil Sutter <phil@nwl.cc>
When fixing the BNF syntax error, I overlooked that 'ip address help'
prints a more correct synopsis. This patch aligns them.
Fixes: 715296b ("ip-address.8.in: fix BNF syntax error")
Signed-off-by: Phil Sutter <phil@nwl.cc>
This adds support for slightly less output than is normally provided by
'ip link show' and 'ip addr show'. This is a bit better when you have a
host with lots of interfaces. Sample output:
$ ip -br link show
lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
p2p1 UP 08:00:27:ee:0b:3b <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
p8p1 DOWN 08:00:27:dc:d8:ca <NO-CARRIER,BROADCAST,MULTICAST,UP>
p9p1 UP 08:00:27:76:d9:75 <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1.100@p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
$ ip -br -4 addr show
lo UNKNOWN 127.0.0.1/8
p2p1 UP 192.168.56.2/24
p7p1 UP 70.0.0.1/24
p8p1 DOWN 80.0.0.1/24
p9p1 UP 10.0.5.15/24
p7p1.100@p7p1 UP 200.0.0.1/24
$ ip -br -6 addr show
lo UNKNOWN ::1/128
p2p1 UP fe80::a00:27ff:feee:b3b/64
p7p1 UP 7000::1/8 fe80::a00:27ff:fe9d:629f/64
p8p1 DOWN 8000::1/8
p9p1 UP fe80::a00:27ff:fe76:d975/64
p7p1.100@p7p1 UP fe80::a00:27ff:fe9d:629f/64
$ ip -br addr show p7p1
p7p1 UP 70.0.0.1/24 7000::1/8 fe80::a00:27ff:fe9d:629f/64
v2: Now with color support!
v3: Better field width estimation (except netdev names to keep output at a
decent width) and whitespace fixup.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Add little more info about how to manually set priority by iptables,
and some little clarifications about ingress/egress QoS mapping.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
The previous man page fixup introduced a syntax error due to missing
opening bracket, which might crash some humanoid BNF parsers.
Fixes: 4e972d5 ("ip-address: fix and extend documentation")
Signed-off-by: Phil Sutter <phil@nwl.cc>
* Improve manual page synopsis and built-it help
* Use full subcommand names (e.g. 'address' and 'maddress')
* Specify when IPv4, IPv6 or both are affected
* Add lifetimes, home and nodad
* Remove any remaining excess spaces
Commit 43d29f7 substantially improves generated ip-address.8 instead of
ip-address.8.in and commit e419f2d removes the generated one losing the
improvements entirely. This commit recovers the lost changes, adapts
them to the current manual page and adds more man page and help
improvements.
Original commit by: Kenyon Ralph <kenyon@kenyonralph.com>
* Add `can` to list of supported link types
* Document `addrgenmode`
* Document `link-netnsid`
* Document VLAN link type
* Improve VXLAN link type documentation
- Fix VXLAN srcport/dstport docs
- Document `udpcsum`, `udp6zerocsumtx` and `udp6zerocsumrx`
This is similar to command options corresponding to other NTF_* flags
already exposed to the user space (examples self/master).
Also updates bridge man page (The man page patch also includes
a fix to the 'self' entry and documents 'master' for fdb entries)
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch allows the user to specify the vlan of the mdb group being
added or deleted and adds support for displaying the vlan when
dumping mdb information or monitoring it. It also updates the man page
to reflect the new "vid" argument for mdb.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch adds support to set and display protodown on a switch port. The
switch driver can handle this error state by doing a phys down on the port.
One example user space application setting this flag is a multi-chassis
LAG application to handle split-brain situation on peer-link failure.
Example:
root@net-next:~# ip link set eth1 protodown on
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff protodown on
root@net-next:~/iproute2# ip link set eth1 protodown off
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff
root@net-next:~/iproute2#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Really by default ss dumps not only TCP sockets but any kind of socket
which is in ESTABLISHED state (TCP/UDP/UNIX).
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Reported-by: Miha Marolt <miham@beyondsemi.com>
Add a start of a man-page to the misc section as a reference and
guide on (e)BPF classifier and actions. Given that tc is only tersely
documented, this is provided in the hope that users will have an
easier getting started with tc and (e)BPF. And, that there's now more
incentive for others to also start documenting their classifier and
actions as well. ;)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
With this patch, it's now possible to listen in all netns that have an nsid
assigned into the netns where is socket is opened.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
With this patch, it's now possible to listen in all netns that have an nsid
assigned into the netns where the socket is opened.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Indicate possibility deleting virtual links by group.
Also changed the alignment of 'ip link delete' args
descriptions, to look like similary to 'ip link set'.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
It is hard to quickly find what you are looking for in the output of the
ip command. Color helps.
This patch adds a '-c' flag to highlight these with individual colors:
- interface name
- ip address
- mac address
- up/down state
Signed-off-by: Mathias Nyman <m.nyman@iki.fi>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Two commands are added:
- ip netns list-id
- ip monitor nsid
A cache is also added to remember the association between the iproute2 netns
name (from /var/run/netns/) and the nsid.
To avoid interfering with the rth socket, a new rtnl socket (rtnsh) is used to
get nsid (we may send rtnl request during listing on rth).
Example:
$ ip netns list-id
nsid 0 (iproute2 netns name: foo)
$ ip monitor nsid
Deleted nsid 0 (iproute2 netns name: foo)
nsid 16 (iproute2 netns name: bar)
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
- document ip xfrm policy set
- update ip xfrm monitor documentation
- in DESCRIPTION section, reorganize grouping of commands
Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com>
This allows querying and setting the route preference. It's usually set from
the IPv6 Neighbor Discovery Router Advertisement messages.
Introduced in "ipv6: expose RFC4191 route preference via rtnetlink", enqueued
for Linux 4.1.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
- Pull in the uapi mpls.h
- Update rtnetlink.h to include the mpls rtnetlink notification multicast group.
- Define AF_MPLS in utils.h if it is not defined from elsewhere
as is done with AF_DECnet
The address syntax for multiple mpls labels is a complete invention.
When I looked there seemed to be no wide spread convention for talking
about an mpls label stack in text for. Sometimes people did:
"{ Label1, Label2, Label3 }", sometimes people would do:
"[ label3, label2, label1 ]", and most of the time label
stacks were not explicitly shown at all.
The syntax I wound up using, so it would not have spaces and so it
would visually distinct from other kinds of addresses is.
label1/label2/label3 Where label1 is the label at the top of the label
stack and label3 is the label at the bottom on the label stack.
When there is a single label this matches what seems to be convention
with other tools. Just print out the numeric value of the mpls label.
The netlink protocol for labels uses the on the wire format for a
label stack. The ttl and traffic class are expected to be 0. Using
the on the wire format is common and what happens with other address
types. BGP when passing label stacks also uses this technique with the
exception that the ttl byte is not included making each label in a BGP
label stack 3 bytes instead of 4.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This attribute is like RTA_DST except it specifies the destination
address to place on a packet when it leaves the host. For ip based
protocols this is destination NAT and not a common part of forwarding.
For protocols like MPLS label swapping is something that typically
happens on every hop.
There is likely to be a RTA_NEWSRC at some point so RTA_NEWDST
is printed as "as to" and can be specified either as "as to"
or just "as"
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add support for the RTA_VIA attribute that specifies an address family
as well as an address for the next hop gateway.
To make it easy to pass this reorder inet_prefix so that it's tail
is a proper RTA_VIA attribute.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
While looking at the manpage, I noticed a reference to 'embedded' that was
added by this commit:
commit d611682a8c
Author: John Fastabend <john.r.fastabend@intel.com>
Date: Thu Sep 13 23:50:36 2012 -0700
iproute2: bridge: finish removing replace option in man pages
I no longer see any reference to the 'embedded' option in any c- or h-files, so
it seems worthwhile to remove.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
CC: John Fastabend <john.r.fastabend@intel.com>
Added some clarification why 'ip link set netns' can not
change network namespace for some kind of devices.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
This patch adds support to specify 'master' keyword,
to target a bridge link command explicitly to the software
bridge driver.
Adds self/master keywords to usage and man page
v2:
fix usage to say (self and master) and not (self or master)
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
The existing behaviour forces one to memorize the integer constants for
STP port states.
# bridge link set dev dummy0 state 3
This patch makes it possible to use the lowercased port state name.
# bridge link set dev dummy0 state forwarding
Invalid non-integer inputs now cause exit with status -1.
Signed-off-by: Alex Pilon <alp@alexpilon.ca>
The kernel now provides ids for peer netns. This patch implements a new command
'set' to assign an id.
When netns are listed, if an id is assigned, it is now displayed.
Example:
$ ip netns add foo
$ ip netns set foo 1
$ ip netns
foo (id: 1)
init_net
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Added new '-N NSNAME, --net=NSNAME' option to show socket stats
from the specified network namespace name.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Add section for additional arguments to GRE, IPIP, and SIT types
that are related to Foo-over-UDP and Generic UDP Encapsulation.
Also, added an example GUE configuration in the examples section.
Signed-off-by: Tom Herbert <therbert@google.com>
This change allows to exec some cmd on each
named netns (except default) by specifying '-all' option:
# ip -all netns exec ip link
Each command executes synchronously.
Exit status is not considered, so there might be a case
that some CMD can fail on some netns but success on the other.
EXAMPLES:
1) Show link info on all netns:
$ ip -all netns exec ip link
netns: test_net
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
4: tap0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 500
link/ether 1a:19:6f:25:eb:85 brd ff:ff:ff:ff:ff:ff
netns: home0
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
4: tap0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 500
link/ether ea:1a:59:40:d3:29 brd ff:ff:ff:ff:ff:ff
netns: lan0
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
4: tap0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 500
link/ether ce:49:d5:46:81:ea brd ff:ff:ff:ff:ff:ff
2) Set UP tap0 device for the all netns:
$ ip -all netns exec ip link set dev tap0 up
netns: test_net
netns: home0
netns: lan0
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
In the ip-link(8) man page, for the gretap, ip6gre, and ip6gretap types, the
word tunnel was incorrectly spelled 'tuunel'.
Signed-off-by: Reese Moore <ram@vt.edu>
This patch adds configuration and dumping of congestion control metric
for ip route, for example:
ip route add <dst> dev foo congctl [lock] dctcp
Reference: http://thread.gmane.org/gmane.linux.network/344733
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
v2:
Resending now that the dust has cleared in 3.18 on "self" vs. hwmode debate for
brport settings. learning_sync is now set/cleared using "self" qualifier on
brport.
v1:
Add 'learned_sync' flag to turn on/off syncing of learned MAC addresses from
offload device to bridge's FDB. Flag is be set/cleared on offload device port
using "self" qualifier:
$ sudo bridge link set dev swp1 learning_sync on self
$ bridge -d link show dev swp1
2: swp1 state UNKNOWN : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br0 state forwarding priority 32 cost 2
hairpin off guard off root_block off fastleave off learning off flood off
2: swp1 state UNKNOWN : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br0
learning on learning_sync on
Adds new IFLA_BRPORT_LEARNED_SYNCED attribute for IFLA_PROTINFO on the SELF
brport.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Added new '-netns' option to simplify executing following cmd:
ip netns exec NETNS ip OPTIONS COMMAND OBJECT
to
ip -n[etns] NETNS OPTIONS COMMAND OBJECT
e.g.:
ip -net vnet0 link add br0 type bridge
ip -n vnet0 link
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Extend "ip-address" man page to reflect the recent extension of
allowing to list addresses with flags tentative, deprecated, dadfailed
not being set.
Signed-off-by: Heiner Kallweit <heiner.kallweit@web.de>
Added new option 'type' to 'ip link show'
command which allows to filter devices by type:
ip link show type bridge
ip link show type vlan
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Added another timestamp format to look like more logging info:
[2014-12-22T22:36:50.489 ] 2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default
link/ether 3c:97:0e:a3:86:2e brd ff:ff:ff:ff:ff:ff
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
This permits to selectively enable explicit congestion notification via
the routing table.
If this ecn feature is not set, the kernel will use the tcp_ecn sysctl
to decide wheter to use ECN when establising a TCP connection.
At the time of this writing, the kernel supports ecn and allfrags, but
allfrags is of dubious value and not implemented here.
Example:
ip route change 192.168.2.0/24 dev eth0 features ecn
Signed-off-by: Florian Westphal <fw@strlen.de>
BEFORE:
The show command has additional formatting options:
-s, -stats, -statistics
output more statistics about packet usage.
-d, -details
output more detailed information.
-h, -human, -human-readble
output statistics with human readable values number followed by suffix
-iec print human readable rates in IEC units (ie. 1K = 1024).
AFTER:
The show command has additional formatting options:
-s, -stats, -statistics
output more statistics about packet usage.
-d, -details
output more detailed information.
-h, -human, -human-readble
output statistics with human readable values number followed by suffix
-iec print human readable rates in IEC units (ie. 1K = 1024).
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
As 'ip' util will share the same netns from the caller
process then we can just look at /proc/self/.. to show
the netns of the current process by:
ip netns id
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Man pages for Foo-over-UDP and Generic UDP Encapsulation receive
port configuration. gue man page links to fou one.
Signed-off-by: Tom Herbert <therbert@google.com>
For hsr link there was no short description in ip-link man page.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Not sure how these typos slipped in back then, I suspect
too much coffee. ;) So lets fix them up properly.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
o "min_tx_rate" option has been added for minimum Tx rate. Hence, for
consistent naming, "max_tx_rate" option has been introduced for maximum
Tx rate.
o Change in v2: "rate" can be used along with "max_tx_rate".
When both are specified, "max_tx_rate" should override.
o Change in v3:
* IFLA_VF_RATE: When IFLA_VF_RATE is used, and user has given only one of
min_tx_rate or max_tx_rate, reading of previous rate limits is done in
userspace instead of in kernel space before ndo_set_vf_rate.
* IFLA_VF_TX_RATE: When IFLA_VF_TX_RATE is used, min_tx_rate is always read
in kernel space. This takes care of below scenarios:
(1) when old tool sends "rate" but kernel is new (expects min and max)
(2) when new tool sends only "rate" but kernel is old (expects only "rate")
o Change in v4 as suggested by Stephen Hemminger:
* As per iproute policy, input and output formats should match. Changing display
of max_tx_rate and min_tx_rate options accordingly.
./ip/ip link show p3p1
8: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:0e:1e:16:ce:40 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 2a:18:8f:4d:3d:d4, tx rate 700 (Mbps), max_tx_rate 700Mbps, min_tx_rate 200Mbps
vf 1 MAC 72:dc:ba:f9:df:fd
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Controller Area Network (CAN) interfaces are physical network interfaces.
They can't be 'created' like software devices by 'ip link add type can'.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
