Add 32-bit missing mask attribute in iproute2/tc, which has been long
supported by the kernel side.
v2: print value in hex with print_hex() as suggested by Stephen Hemminger.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Setting metrics for routes currently lead to non-parsable
json output. For example:
$ ip link add type dummy
$ ip route add 192.168.2.0 dev dummy0 metric 100 mtu 1000 rto_min 3
$ ip -j route | jq
parse error: ':' not as part of an object at line 1, column 319
Fixing this opening a json object in the metrics array and using
print_string() instead of fprintf().
This is the output for the above commands applying this patch:
$ ip -j route | jq
[
{
"dst": "192.168.2.0",
"dev": "dummy0",
"scope": "link",
"metric": 100,
"flags": [],
"metrics": [
{
"mtu": 1000,
"rto_min": 3
}
]
}
]
Fixes: 663c3cb231 ("iproute: implement JSON and color output")
Fixes: 968272e791 ("iproute: refactor metrics print")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reported-by: Frank Hofmann <fhofmann@cloudflare.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As the man page for tc netem states:
To use the Bernoulli model, the only needed parameter is p while the
others will be set to the default values r=1-p, 1-h=1 and 1-k=0.
However r parameter is erroneusly set to 1, and not to 1-p.
Fix this using the same approach of the 4-state loss model.
Fixes: 3c7950af59 ("netem: add support for 4 state and GE loss model")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
ss by default shows data rates in human-readable form - as Mbps/Gbps etc.
Enhance --numeric mode to show raw values in bps, without conversion.
Signed-of-by: Tomasz Torcz <tomasz.torcz@nordea.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
URL for netem page on sources section points to a no more existent
resource. Fix this using the correct URL.
Fixes: cd72dcf13c ("netem: add man-page")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since commit 2f1242efe9 ("devlink: Add devlink health show command") we
use the sys/sysinfo.h header for the sysinfo(2) system call. But since
iproute2 carries a local version of the kernel struct sysinfo, this
causes a collision with libc that do not rely on kernel defined sysinfo
like musl libc:
In file included from devlink.c:25:0:
.../sysroot/usr/include/sys/sysinfo.h:10:8: error: redefinition of 'struct sysinfo'
struct sysinfo {
^~~~~~~
In file included from ../include/uapi/linux/kernel.h:5:0,
from ../include/uapi/linux/netlink.h:5,
from ../include/uapi/linux/genetlink.h:6,
from devlink.c:21:
../include/uapi/linux/sysinfo.h:8:8: note: originally defined here
struct sysinfo {
^~~~~~~
Move the sys/sysinfo.h userspace header before kernel headers, and
suppress the indirect include of linux/sysinfo.h.
Cc: Aya Levin <ayal@mellanox.com>
Cc: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
32bit targets define uint64_t as long long unsigned. This leads to the
following build warning:
devlink.c: In function ‘pr_out_u64’:
devlink.c:1729:11: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘uint64_t {aka long long unsigned int}’ [-Wformat=]
pr_out("%s %lu", name, val);
^
devlink.c:59:21: note: in definition of macro ‘pr_out’
fprintf(stdout, ##args); \
^~~~
Use uint64_t specific conversion specifiers in the format string to fix
that.
Cc: Aya Levin <ayal@mellanox.com>
Cc: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
'mngtmpaddr' option make the kernel manage temporary addresses
created from the specified one as template on behalf of Privacy
Extensions (RFC3041). This option should be available only for
IPv6 addresses, as correctly stated in the manpage.
However it is possible to set mngtmpaddr on IPv4 addresses, too:
$ ip link add dummy0 type dummy
$ ip -4 addr add 192.168.1.1 dev dummy0 mngtmpaddr
$ ip a
1: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 1a:6d:c6:96:ca:f8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/32 scope global mngtmpaddr dummy0
valid_lft forever preferred_lft forever
Fix this adding a check on the protocol family before setting
IFA_F_MANAGETEMPADDR flag.
Fixes: 5b7e21c417 ("add support for IFA_F_MANAGETEMPADDR")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
'home' option designates a IPv6 address as "home address" as
defined in RFC 6275. This option should be available only for
IPv6 addresses, as correctly stated in the manpage.
However it is possible to set home on IPv4 addresses, too:
$ ip link add dummy0 type dummy
$ ip -4 addr add 192.168.1.1 dev dummy0 home
$ ip a
1: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 1a:6d:c6:96:ca:f8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/32 scope global home dummy0
valid_lft forever preferred_lft forever
Fix this adding a check on the protocol family before setting
IFA_F_HOMEADDRESS flag.
Fixes: bac735c53a ("enabled to manipulate the flags of IFA_F_HOMEADDRESS or IFA_F_NODAD from ip.")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Duplicate Address Detection (RFC 4862) is available only for IPv6
addresses. As a consequence, 'nodad' option, turning it off, should
be available only for IPv6, and is defined like that in the man page.
However it is possible to set nodad on IPv4 addresses, too:
$ ip link add dummy0 type dummy
$ ip -4 addr add 192.168.1.1 dev dummy0 nodad
$ ip a
1: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 1a:6d:c6:96:ca:f8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/32 scope global nodad dummy0
valid_lft forever preferred_lft forever
Fix this adding a check on the protocol family before setting
IFA_F_NODAD flag.
Fixes: bac735c53a ("enabled to manipulate the flags of IFA_F_HOMEADDRESS or IFA_F_NODAD from ip.")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
With a current (5.1) kernel version, IPv6 exception routes can't be listed
(ip -6 route list cache) or flushed (ip -6 route flush cache). Kernel
support for this is being added back. Relevant net-next commits:
564c91f7e563 fib_frontend, ip6_fib: Select routes or exceptions dump from RTM_F_CLONED
ef11209d4219 Revert "net/ipv6: Bail early if user only wants cloned entries"
3401bfb1638e ipv6/route: Don't match on fc_nh_id if not set in ip6_route_del()
bf9a8a061ddc ipv6/route: Change return code of rt6_dump_route() for partial node dumps
1e47b4837f3b ipv6: Dump route exceptions if requested
40cb35d5dc04 ip6_fib: Don't discard nodes with valid routing information in fib6_locate_1()
However, to allow the kernel to filter routes based on the RTM_F_CLONED
flag, we need to make sure this flag is always passed when we want cached
routes to be dumped, and we can also pass table and output interface
attributes to have the kernel filtering on them, if requested by the user.
Use the existing iproute_dump_filter() as a filter for the dump request in
iproute_flush(). This way, 'ip -6 route flush cache' works again.
v2: Instead of creating a separate 'filter' function dealing with
RTM_F_CACHED only, use the existing iproute_dump_filter() and get
table and oif kernel filtering for free. Suggested by David Ahern.
Fixes: aba5acdfdb ("(Logical change 1.3)")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When we disable IPv6 from the start up (ipv6.disable=1), there will be
no IPv6 route info in the dump message. If we return -1 when
ifi->ifi_family != AF_INET6, we will get error like
$ ip token list
Dump terminated
which will make user feel confused. There is no need to return -1 if the
dump message not match. Return 0 is enough.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
iptables commit 933400b37d09 ("nft: xtables: add the infrastructure to translate from iptables to nft")
added an additional member to struct xtables_match and struct xtables_target.
This change is available for libxtables12 and up.
Add these members conditionally to support both newer and older versions.
Fixes: dd29621578 ("tc: add em_ipt ematch for calling xtables matches from tc matching context")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Only interface from group 0 were displayed.
ip monitor calls ipaddr_reset_filter() and there is no reason to not reset
the filter group in this function.
Fixes: c4fdf75d3d ("ip link: fix display of interface groups")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The netns_{save,restore} functions are only used in ipnetns.c now, since
the restore is not needed anymore after the netns exec command.
Move them in ipnetns.c, and make them static.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
On vrf exec, reset the VRF associations in the child process, via the
new hook added to cmd_exec(). In this way, the parent doesn't have to
reset the VRF associations before spawning other processes.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
'ip netns exec' changes the current netns just before executing a child
process, and restores it after forking. This is needed if we're running
in batch or do_all mode.
Some cleanups must be done both in the parent and in the child: the
parent must restore the previous netns, while the child must reset any
VRF association.
Unfortunately, if do_all is set, the VRF are not reset in the child, and
the spawned processes are started with the wrong VRF context. This can
be triggered with this script:
# ip -b - <<-'EOF'
link add type vrf table 100
link set vrf0 up
link add type dummy
link set dummy0 vrf vrf0 up
netns add ns1
EOF
# ip -all -b - <<-'EOF'
vrf exec vrf0 true
netns exec setsid -f sleep 1h
EOF
# ip vrf pids vrf0
314 sleep
# ps 314
PID TTY STAT TIME COMMAND
314 ? Ss 0:00 sleep 1h
Refactor cmd_exec() and pass to it a function pointer which is called in
the child before the final exec. In the netns exec case the function just
resets the VRF and switches netns.
Doing it in the child is less error prone and safer, because the parent
environment is always kept unaltered.
After this refactor some utility functions became unused, so remove them.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
make provides a handy -C option to change directory before reading
the makefiles or doing anything else.
Use that instead of the "cd dir && make && cd .." pattern, thus
simplifying sintax for some makefiles.
Changes from v1:
- Drop an obviously wrong leftover on testsuite/iproute2/Makefile
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This variable has the same name as `struct xfrm_filter filter` in
ip/ipxfrm.c, but overrides that definition since `struct rtfilter`
is larger.
This is visible when built with -Wl,--warn-common in LDFLAGS:
/usr/bin/ld: ipxfrm.o: warning: common of `filter' overridden by larger common from ipmroute.o
Signed-off-by: Michael Forney <mforney@mforney.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Devlink commands which implements the dumpit callback may return error.
The netlink function netlink_dump() sends the errno value as the payload
of the message, while answering user space with NLMSG_DONE.
To enable receiving errno value for dumpit commands we have to check for
it in the message. If it is a negative value then the dump returned an
error so we should set errno accordingly and check for ext_ack in case
it was set.
Fixes: 049c58539f ("devlink: mnlg: Add support for extended ack")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Inclusion of 'dev' is allowed by the syntax but not handled
correctly by the command. It produces no output for show
command and falsely successful for change command but does
not make any changes.
can be verified with the following steps
# ip -6 tunnel add ip6tnl1 mode ip6gre local fd::1 remote fd::2 tos inherit ttl 127 encaplimit none
# ip -6 tunnel show ip6tnl1
<correct output>
# ip -6 tunnel show dev ip6tnl1
<no output but correct output after this change>
# ip -6 tunnel change dev ip6tnl1 local 2001🔢:1 remote 2001🔢:2 encaplimit none ttl 127 tos inherit allow-localremote
# echo $?
0
# ip -6 tunnel show ip6tnl1
<no changes applied, but changes are correctly applied after this change>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When creating a new netns or executing a program into an existing one,
the unshare() or setns() calls will change the current netns.
In batch mode, this can run commands on the wrong interfaces, as the
ifindex value is meaningful only in the current netns. For example, this
command fails because veth-c doesn't exists in the init netns:
# ip -b - <<-'EOF'
netns add client
link add name veth-c type veth peer veth-s netns client
addr add 192.168.2.1/24 dev veth-c
EOF
Cannot find device "veth-c"
Command failed -:7
But if there are two devices with the same name in the init and new netns,
ip will build a wrong ll_map with indexes belonging to the new netns,
and will execute actions in the init netns using this wrong mapping.
This script will flush all eth0 addresses and bring it down, as it has
the same ifindex of veth0 in the new netns:
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.76/24 brd 192.168.122.255 scope global dynamic eth0
valid_lft 3598sec preferred_lft 3598sec
# ip -b - <<-'EOF'
netns add client
link add name veth0 type veth peer name veth1
link add name veth-ns type veth peer name veth0 netns client
link set veth0 down
address flush veth0
EOF
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
3: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether c2:db:d0:34:13:4a brd ff:ff:ff:ff:ff:ff
4: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether ca:9d:6b:5f:5f:8f brd ff:ff:ff:ff:ff:ff
5: veth-ns@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 32:ef:22:df:51:0a brd ff:ff:ff:ff:ff:ff link-netns client
The same issue can be triggered by the netns exec subcommand with a
sligthy different script:
# ip netns add client
# ip -b - <<-'EOF'
netns exec client true
link add name veth0 type veth peer name veth1
link add name veth-ns type veth peer name veth0 netns client
link set veth0 down
address flush veth0
EOF
Fix this by adding two netns_{save,reset} functions, which are used
to get a file descriptor for the init netns, and restore it after
each batch command.
netns_save() is called before the unshare() or setns(),
while netns_restore() is called after each command.
Fixes: 0dc34c7713 ("iproute2: Add processless network namespace support")
Reviewed-and-tested-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
the following TDC test case:
b776 - Replace simple action with invalid goto chain control
checks if the kernel correctly validates the 'goto chain' control action,
when it is specified in 'act_simple' rules. The test systematically fails
because the control action is hardcoded in parse_simple(), i.e. it is not
parsed by command line arguments, so its value is constantly TC_ACT_PIPE.
Because of that, the following command:
# tc action add action simple sdata "test" drop index 7
installs an 'act_simple' rule that never drops packets, and whose 'index'
is the first IDR available, plus an 'act_gact' rule with 'index' equal to
7, that drops packets.
Use parse_action_control_dflt(), like we did on many other TC actions, to
make the control action configurable also with 'act_simple'. The expected
results of test b776 are summarized below:
iproute2
v kernel->| 5.1-rc2 (and previous) | 5.1-rc3 (and subsequent)
------------------+-------------------------+-------------------------
5.1.0 | FAIL (bad IDR) | FAIL (bad IDR)
5.1.0(patched) | FAIL (no rule/bad sdata)| PASS
Changes since v1:
- reword commit message, thanks Stephen Hemminger
Fixes: 087f46ee4e ("tc: introduce simple action")
CC: Andrea Claudi <aclaudi@redhat.com>
CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The following operation fails:
% sudo tc actions add action pipe index 1
% sudo tc filter add dev lo parent ffff: \
protocol ip pref 10 u32 match ip src 127.0.0.2 \
flowid 1:10 action gact index 1
Bad action type index
Usage: ... gact <ACTION> [RAND] [INDEX]
Where: ACTION := reclassify | drop | continue | pass | pipe |
goto chain <CHAIN_INDEX> | jump <JUMP_COUNT>
RAND := random <RANDTYPE> <ACTION> <VAL>
RANDTYPE := netrand | determ
VAL : = value not exceeding 10000
JUMP_COUNT := Absolute jump from start of action list
INDEX := index value used
However, passing a control action of gact rule during filter binding works:
% sudo tc filter add dev lo parent ffff: \
protocol ip pref 10 u32 match ip src 127.0.0.2 \
flowid 1:10 action gact pipe index 1
Binding by reference, i.e. by index, has to consistently work with
any tc action.
Since tc is sensitive to the order of keywords passed on the command line,
we can teach gact to skip parsing arguments as soon as it sees 'gact'
followed by 'index' keyword.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Device name on mdev bus is 36 characters long which follow standard uuid
RFC 4122.
This is probably the longest name that a kernel will return for a
device.
Hence increase the buffer size to 64 bytes.
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
while at it, fix missing square bracket near 'ptype' and a typo in the
action description (it's -> its).
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It will obviously fail. This is a follow up of the
commit 757837230a ("lib: suppress error msg when filling the cache").
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
While I fixed the mdb json output, I did overlook the text output.
This patch returns the original text output format:
dev <bridge> port <port> grp <mcast group> <temp|permanent> <flags> <timer>
Example (old format, restored by this patch):
dev br0 port eth8 grp 239.1.1.11 temp
Example (changed format after the commit below):
23: br0 eth8 239.1.1.11 temp
We had some reports of failing scripts which were parsing the output.
Also the old format matches the bridge mdb command syntax which makes
it easier to build commands out of the output.
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
sscanf truncates read port values silently without any error. As sscanf
man says:
(...) sscanf() conform to C89 and C99 and POSIX.1-2001. These standards
do not specify the ERANGE error.
Replace sscanf with safer get_be16 that returns error when value is out
of range.
Example:
tc filter add dev eth0 protocol ip parent ffff: prio 1 flower ip_proto
tcp dst_port 70000 hw_tc 1
Would result in filter for port 4464 without any warning.
Fixes: 8930840e67 ("tc: flower: Classify packets based port ranges")
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Before the patch:
$ ip netns add foo
$ ip link add name veth1 address 2a:a5:5c:b9:52:89 type veth peer name veth2 address 2a:a5:5c:b9:53:90 netns foo
RTNETLINK answers: No such device
RTNETLINK answers: No such device
But the command was successful. This may break script. Let's remove those
error messages.
Fixes: 55870dfe7f ("Improve batch and dump times by caching link lookups")
Reported-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The mirred act admits an optional control action, defaulting
to TC_ACT_PIPE. The parsing code currently emits an error message
if the control action is not provided on the command line, even
if the command itself completes with no error.
This change shuts down the error message, using the appropriate
parsing helper.
Fixes: e67aba5595 ("tc: actions: add helpers to parse and print control actions")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fix typo in usnic_udp node type and add a string for the unspecified
node type.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
import asm-generic/sockios.h to fix the compile errors from the
movement of timestamp macros.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow to limit 'ip xfrm {state|policy} list' output to a certain address
family and to delete all states/policies by family.
Although preferred_family was already set in filters, the filter
function ignored it. To enable filtering despite the lack of other
selectors, filter.use has to be set if family is not AF_UNSPEC.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
