This page is to highlight all operations and options that are
applicable to all tc actions.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Let XDP link set command request that the program be offloaded.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Allow user to select XDP DRV_MODE flag by using xdpdrv keyword
instead of xdp or xdpgeneric.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Add interpretation of XDP_ATTACHED_HW mode on dump.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds support to the newly added IFLA_XDP_PROG_ID.
./ip link show dev eth0
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdpgeneric/id:2 qdisc [...]
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
When LLVM wrongly generates a rodata relo entry (llvm BZ #33599),
then just bail out instead of probing for prog w/o reloc, which
will fail in this case anyway.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
As it turned out, forgetting to add a man page to the respective
Makefile when introducing it is a common mistake. Overcome this once and
for all by using $(wildcard) function in Makefiles.
Fixes: 7124942942 ("genl: add manpage")
Fixes: 958cd21094 ("ifcfg: add manpage")
Fixes: e1b7f883e5 ("man: add documentation for IPv6 SR commands")
Fixes: 1949f82cdf ("Introduce ip vrf command")
Fixes: 535194a172 ("tipc: add peer remove functionality")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Adding new tunnel key fields would cause the usage line overflow 80 chars.
Make the usage text similar to other commands.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
In case default control action parsing takes place, it is ok to miss.
So don't print error message.
Fixes: e67aba5595 ("tc: actions: add helpers to parse and print control actions")
Reported-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Tested-by: Jiri Benc <jbenc@redhat.com>
If a header that includes linux/in6.h is included before
iproute's utils.h, then iproute2 fails to compile on older
glibc versions.
Fixes: e8493916a8 ("iproute: add support for SR-IPv6 lwtunnel encapsulation")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
After upstream commit 5071034e4af7 ('neigh: Really delete an arp/neigh entry
on "ip neigh delete" or "arp -d"'), we could delete a single FAILED neighbour
entry now. But `ip neigh flush` still skip the FAILED entry.
Move the filter after first round flush so we can flush FAILED entry on fixed
kernel and also do not keep retrying on old kernel.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
When the user specifies `table all` or `table 0` to
the `ip mroute show` command we dump the entirety of
the known mroute tables. Without some sort of
divisor to tell us what table we are looking at
the command is useless.
Add `Table: <vrf name>` to the output of 'ip mroute show table 0'
Follow the convention established by 'ip route show table 0'
for when to display
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This option is documented in gre6 help, but was not supported.
Fixes: af89576d7a ("iproute2: GRE over IPv6 tunnel support.")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
When modifying a route we set the RTA_OIF attribute only if a device was
specified with "dev" or "oif" keyword. But for some unknown reason we
earlier alternatively check also for the presence of "nexthop" keyword,
even though it has no effect. So remove the pointless check.
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Distinguish between externally learned vs offloaded FDBs. This is done
in order to indicate that FDBs added by software was successfully
offloaded.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
parse_action_control helper does advancing of the arg inside. So don't
do it outside.
Fixes: e67aba5595 ("tc: actions: add helpers to parse and print control actions")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Allow users to set flower classifier filter rules which
include matches for ip tos and ttl.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Add IFLA_EVENT output so that event types can be viewed with
'monitor' command. This gives a little more information for why
a given message was received.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Uses newly introduced RTM_GETROUTE flag RTM_F_FIB_MATCH
to return a matching fib route. Introduces 'fibmatch'
keyword to ip route get.
ipv4:
----
$ip route show
default via 192.168.0.2 dev eth0
10.0.14.0/24
nexthop via 172.16.0.3 dev dummy0 weight 1
nexthop via 172.16.1.3 dev dummy1 weight 1
$ip route get 10.0.14.2
10.0.14.2 via 172.16.1.3 dev dummy1 src 172.16.1.1
cache
$ip route get fibmatch 10.0.14.2
10.0.14.0/24
nexthop via 172.16.0.3 dev dummy0 weight 1
nexthop via 172.16.1.3 dev dummy1 weight 1
ipv6:
----
$ip -6 route show
2001:db9:100::/120 metric 1024
nexthop via 2001:db8:2::2 dev dummy0 weight 1
nexthop via 2001:db8:12::2 dev dummy1 weight 1
$ip -6 route get 2001:db9:100::1
2001:db9:100::1 from :: via 2001:db8:12::2 dev dummy1 \
src 2001:db8:12::1 metric 1024 pref medium
$ip -6 route get fibmatch 2001:db9:100::1
2001:db9:100::/120 metric 1024
nexthop via 2001:db8:12::2 dev dummy1 weight 1
nexthop via 2001:db8:2::2 dev dummy0 weight 1
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: David Ahern <dsahern@gmail.com>
Add to usage message a description of how to configure Infiniband node
and port GUIDs. Also modify the man page to emphasize the GUIDs are
configured for Infiniband VFs.
Fixes: d91fb3f4c7 ("Add support for configuring Infiniband GUIDs")
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Since commit a8f820a380a2a06 ('can: add Virtual CAN Tunnel driver (vxcan)')
for Linux 4.12 a virtual CAN tunnel driver analogue to veth is available in
Linux.
This patch adds the ability to create vxcan device pairs.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Change print_linkinfo_brief to take the filter as an input arg.
If the arg is NULL, use the global filter in ipaddress.c.
Signed-off-by: David Ahern <dsahern@gmail.com>
ipaddr_list_flush_or_save generates a list of nlmsg's for links and
optionally for addresses. Move the code into ip_linkaddr_list and
export it along with the supporting infrastructure.
API to use this function is:
struct nlmsg_chain linfo = { NULL, NULL};
struct nlmsg_chain ainfo = { NULL, NULL};
ip_linkaddr_list(family, filter_req, &linfo, &ainfo);
... error checking and code looping over linfo/ainfo ...
free_nlmsg_chain(&linfo);
free_nlmsg_chain(&ainfo);
Signed-off-by: David Ahern <dsahern@gmail.com>
I noticed we currently don't dump an error message when a pinned
program couldn't be retrieved, thus add a hint to the user.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Follow-up to d67b9cd28c1d ("xdp: refine xdp api with regards to
generic xdp") in order to update the XDP dumping part.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
