This patch adds support for bridge vlan_protocol.
Example:
$ ip link set br0 type bridge vlan_protocol 802.1ad
$ ip -d link show br0
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP mode DEFAULT group default qlen 1000
link/ether 44:37:e6🆎cd:ef brd ff:ff:ff:ff:ff:ff promiscuity 0
bridge forward_delay 0 hello_time 200 max_age 2000 ageing_time 30000
stp_state 0 priority 32768 vlan_filtering 0 vlan_protocol 802.1ad
addrgenmode eui64
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
This adds support for slightly less output than is normally provided by
'ip link show' and 'ip addr show'. This is a bit better when you have a
host with lots of interfaces. Sample output:
$ ip -br link show
lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
p2p1 UP 08:00:27:ee:0b:3b <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
p8p1 DOWN 08:00:27:dc:d8:ca <NO-CARRIER,BROADCAST,MULTICAST,UP>
p9p1 UP 08:00:27:76:d9:75 <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1.100@p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
$ ip -br -4 addr show
lo UNKNOWN 127.0.0.1/8
p2p1 UP 192.168.56.2/24
p7p1 UP 70.0.0.1/24
p8p1 DOWN 80.0.0.1/24
p9p1 UP 10.0.5.15/24
p7p1.100@p7p1 UP 200.0.0.1/24
$ ip -br -6 addr show
lo UNKNOWN ::1/128
p2p1 UP fe80::a00:27ff:feee:b3b/64
p7p1 UP 7000::1/8 fe80::a00:27ff:fe9d:629f/64
p8p1 DOWN 8000::1/8
p9p1 UP fe80::a00:27ff:fe76:d975/64
p7p1.100@p7p1 UP fe80::a00:27ff:fe9d:629f/64
$ ip -br addr show p7p1
p7p1 UP 70.0.0.1/24 7000::1/8 fe80::a00:27ff:fe9d:629f/64
v2: Now with color support!
v3: Better field width estimation (except netdev names to keep output at a
decent width) and whitespace fixup.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Add little more info about how to manually set priority by iptables,
and some little clarifications about ingress/egress QoS mapping.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Allow user to create a vrf device and specify its table binding.
Based on the iplink_vlan implementation.
Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
The previous man page fixup introduced a syntax error due to missing
opening bracket, which might crash some humanoid BNF parsers.
Fixes: 4e972d5 ("ip-address: fix and extend documentation")
Signed-off-by: Phil Sutter <phil@nwl.cc>
My previous patch 5950ba9 ("lib/namespace: don't leak fd in error case")
was a step in the wrong direction. Instead of closing the opened file
descriptor in error case only, follow a better approach here and close
the fd as soon as it is not used anymore. This way the inelegant goto
statements can be dropped, and the fd leak in non-error case is fixed as
well.
Fixes: 5950ba9 ("lib/namespace: don't leak fd in error case")
Signed-off-by: Phil Sutter <phil@nwl.cc>
* Improve manual page synopsis and built-it help
* Use full subcommand names (e.g. 'address' and 'maddress')
* Specify when IPv4, IPv6 or both are affected
* Add lifetimes, home and nodad
* Remove any remaining excess spaces
Commit 43d29f7 substantially improves generated ip-address.8 instead of
ip-address.8.in and commit e419f2d removes the generated one losing the
improvements entirely. This commit recovers the lost changes, adapts
them to the current manual page and adds more man page and help
improvements.
Original commit by: Kenyon Ralph <kenyon@kenyonralph.com>
* Add `can` to list of supported link types
* Document `addrgenmode`
* Document `link-netnsid`
* Document VLAN link type
* Improve VXLAN link type documentation
- Fix VXLAN srcport/dstport docs
- Document `udpcsum`, `udp6zerocsumtx` and `udp6zerocsumrx`
This was working before, but only if realloc a) succeeded and b) did not
move the buffer to a different location. ''**buf = **new_buf' then
writes the value of *new_buf's first field into that of *buf.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This patch implements support for the IFLA_BR_VLAN_FILTERING attribute
in iproute2 so it can enable/disable vlan_filtering.
Example:
$ ip link set br0 type bridge vlan_filtering 1
$ ip -d link show br0
6: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP mode DEFAULT group default
link/ether 08:00:27:ea:07:38 brd ff:ff:ff:ff:ff:ff promiscuity 0
bridge forward_delay 1500 hello_time 200 max_age 2000 vlan_filtering 1
addrgenmode eui64
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
When showing bridge attributes, show also ageing_time, stp_state and
priority if available.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Add support to be able to set and show the value of tlb_dynamic_lb
(IFLA_BOND_TLB_DYNAMIC_LB).
Example:
$ ip -d link show dev bond0 type bond
7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default
link/ether ce:2f:e1:6e:d7:e0 brd ff:ff:ff:ff:ff:ff promiscuity 0
bond mode balance-tlb miimon 100 updelay 0 downdelay 0 use_carrier 1
arp_interval 0 arp_validate none arp_all_targets any primary_reselect
always fail_over_mac none xmit_hash_policy layer2 resend_igmp 1
num_grat_arp 1 all_slaves_active 0 min_links 0 lp_interval 1
packets_per_slave 1 lacp_rate slow ad_select stable tlb_dynamic_lb 1
addrgenmode eui64
$ ip -d l set dev bond0 type bond tlb_dynamic_lb 0
$ ip -d link show dev bond0 type bond
7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default
link/ether ce:2f:e1:6e:d7:e0 brd ff:ff:ff:ff:ff:ff promiscuity 0
bond mode balance-tlb miimon 100 updelay 0 downdelay 0 use_carrier 1
arp_interval 0 arp_validate none arp_all_targets any primary_reselect
always fail_over_mac none xmit_hash_policy layer2 resend_igmp 1
num_grat_arp 1 all_slaves_active 0 min_links 0 lp_interval 1
packets_per_slave 1 lacp_rate slow ad_select stable tlb_dynamic_lb 0
addrgenmode eui64
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Frontend support for kernel commit a5c90b29e5cc ("act_bpf: properly
support late binding of bpf action to a classifier").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Before this patch both addmdb and delmdb events were printed the same,
now we'll get a "Deleted" string in front when delmdb is received.
Before:
$ bridge mdb add dev br0 port eth3 grp 239.0.0.1
(monitor) dev br0 port eth3 grp 239.0.0.1 temp
$ bridge mdb del dev br0 port eth3 grp 239.0.0.1
(monitor) dev br0 port eth3 grp 239.0.0.1 temp
^^ No way to differentiate between both events.
After:
$ bridge mdb add dev br0 port eth3 grp 239.0.0.1
(monitor) dev br0 port eth3 grp 239.0.0.1 temp
$ bridge mdb del dev br0 port eth3 grp 239.0.0.1
(monitor) Deleted dev br0 port eth3 grp 239.0.0.1 temp
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
