This patch adds support to parse and print lwtunnel
encapsulation attributes attached to routes for MPLS
and IP tunnels.
example:
Add ipv4 route with mpls encap attributes:
Examples:
MPLS:
$ ip route add 40.1.2.0/30 encap mpls 200 via inet 40.1.1.1 dev eth3
$ ip route show
40.1.2.0/30 encap mpls 200 via 40.1.1.1 dev eth3
Add ipv4 multipath route with mpls encap attributes:
$ ip route add 10.1.1.0/30 nexthop encap mpls 200 via 10.1.1.1 dev eth0 \
nexthop encap mpls 700 via 40.1.1.2 dev eth3
$ ip route show
10.1.1.0/30
nexthop encap mpls 200 via 10.1.1.1 dev eth0 weight 1
nexthop encap mpls 700 via 40.1.1.2 dev eth3 weight 1
IP:
$ ip route add 10.1.1.1/24 encap ip id 200 dst 20.1.1.1 dev vxlan0
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Jiri Benc <jbenc@redhat.com>
It helps to grep for one string "Deleted" when monitoring all events.
Fixes: 6ea3ebafe0 ("iproute2: inform user when a neighbor is removed")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This flag is allowed for devices in passthru mode to prevent forcing the
underlying interface into promiscuous mode.
Signed-off-by: Phil Sutter <phil@nwl.cc>
After eliminating the minor differences in both files which existed
solely because features/fixes were applied to only one of them and not
the other, the remaining differences were in function naming and error
messages. The latter is addressed by using the 'id' field of struct
link_util.
Fold both files into one in order to share common code and eliminate the
chance of having fixes/enhancements applied to only one of them.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Add ifindex to dump request when filtering by device. If the kernel
supports it adding the index to the request limits the amount of data
the kernel pushes to userpsace.
The feature exists in userspace already, so no need to warn the user
if kernel side support does not exist. Using the kernel side filter
makes the request more efficient.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add support for filtering neighbor dumps by master device. Kernel side
support provided by commit 21fdd092acc7. Since the feature is not
available in older kernels the user is given a warning message if the
kernel does not support the request.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Device names that match "help" or a prefix thereof should be allowed anywhere
a device name can be used. Note that a suitable keyword ("dev" or "name", the
latter for "ip tunnel") has to be used in these cases to resolve ambiguities.
Signed-off-by: Christoph Schulz <develop@kristov.de>
Reported-by: Leonhard Preis <leonhard@pre.is>
Reported-by: Wilhelm Wijkander <lists@0x5e.se>
The brief format does not honer the master and type filters:
$ ip link show master vrf-mgmt
7: dummy0: <BROADCAST,NOARP,SLAVE> mtu 1500 qdisc noop master vrf-mgmt state DOWN mode DEFAULT group default qlen 1000
link/ether 66:39:cc:2b:e9:bd brd ff:ff:ff:ff:ff:ff
$ ip -br link show master vrf-mgmt
lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
eth0 UP 08:00:27🇩🇪14:c8 <BROADCAST,MULTICAST,UP,LOWER_UP>
eth1 UP 08:00:27:87:02:f1 <BROADCAST,MULTICAST,UP,LOWER_UP>
eth2 UP 08:00:27:61:1e:fd <BROADCAST,MULTICAST,UP,LOWER_UP>
vrf-blue UNKNOWN a6:3f:09:34:7e:74 <NOARP,MASTER,UP,LOWER_UP>
vrf-red DOWN fe:a2:2d:e1:bc:ac <NOARP,MASTER>
dummy0 DOWN 66:39:cc:2b:e9:bd <BROADCAST,NOARP,SLAVE>
dummy1 DOWN 4a:4f:13:91:64:b1 <BROADCAST,NOARP,SLAVE>
dummy2 DOWN b2:4f:b6💿bd:a6 <BROADCAST,NOARP>
dummy3 DOWN 1e:06:3d:40:b8:c2 <BROADCAST,NOARP,SLAVE>
vrf-mgmt DOWN ce:b2:74:41:21:df <NOARP,MASTER>
With this patch the expected output is shown:
$ ip -br link show master vrf-mgmt
dummy0 DOWN 66:39:cc:2b:e9:bd <BROADCAST,NOARP,SLAVE>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Currently 'ip route get' does not show the table the lookup result comes
from and prior to kernel commit c36ba6603a11 the response from the kernel
was hardcoded to the main table. From the discussion this appears to be
a leftover from the route cache where the cached entry lost the table id
and so the result was hardcoded to main table.
c36ba6603a11 added the RTM_F_LOOKUP_TABLE flag to maintain that behavior
but to allow new tools to ask for the actual table id for the lookup.
This patch adds that flag to ip route get request and if the result is
not the main table shows the table id.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Currently when we specify AF_INET6 when it is disabled, we will get
all routes.
For example, we can boot kernel with ipv6.disable=1 and try to get ipv6
routes:
$ ip -6 route show
default via 192.168.122.1 dev eth0 proto static metric 100
192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.141 metric 100
Here are ipv4 routes and this is unexpected behaviour.
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Commit 0532555 ('Support "ip link add help" for rtnl_link API') added a
check for specified help parameter. Though due to the place where it has
been added to, it is not possible anymore to force a given parameter to
be interpreted as interface name by prefixing it with 'dev '. Fix this
by forcing whatever follows 'dev' to be presumed as interface name.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This patch adds support for bridge vlan_protocol.
Example:
$ ip link set br0 type bridge vlan_protocol 802.1ad
$ ip -d link show br0
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP mode DEFAULT group default qlen 1000
link/ether 44:37:e6🆎cd:ef brd ff:ff:ff:ff:ff:ff promiscuity 0
bridge forward_delay 0 hello_time 200 max_age 2000 ageing_time 30000
stp_state 0 priority 32768 vlan_filtering 0 vlan_protocol 802.1ad
addrgenmode eui64
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
This adds support for slightly less output than is normally provided by
'ip link show' and 'ip addr show'. This is a bit better when you have a
host with lots of interfaces. Sample output:
$ ip -br link show
lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
p2p1 UP 08:00:27:ee:0b:3b <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
p8p1 DOWN 08:00:27:dc:d8:ca <NO-CARRIER,BROADCAST,MULTICAST,UP>
p9p1 UP 08:00:27:76:d9:75 <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1.100@p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
$ ip -br -4 addr show
lo UNKNOWN 127.0.0.1/8
p2p1 UP 192.168.56.2/24
p7p1 UP 70.0.0.1/24
p8p1 DOWN 80.0.0.1/24
p9p1 UP 10.0.5.15/24
p7p1.100@p7p1 UP 200.0.0.1/24
$ ip -br -6 addr show
lo UNKNOWN ::1/128
p2p1 UP fe80::a00:27ff:feee:b3b/64
p7p1 UP 7000::1/8 fe80::a00:27ff:fe9d:629f/64
p8p1 DOWN 8000::1/8
p9p1 UP fe80::a00:27ff:fe76:d975/64
p7p1.100@p7p1 UP fe80::a00:27ff:fe9d:629f/64
$ ip -br addr show p7p1
p7p1 UP 70.0.0.1/24 7000::1/8 fe80::a00:27ff:fe9d:629f/64
v2: Now with color support!
v3: Better field width estimation (except netdev names to keep output at a
decent width) and whitespace fixup.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Allow user to create a vrf device and specify its table binding.
Based on the iplink_vlan implementation.
Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
* Improve manual page synopsis and built-it help
* Use full subcommand names (e.g. 'address' and 'maddress')
* Specify when IPv4, IPv6 or both are affected
* Add lifetimes, home and nodad
* Remove any remaining excess spaces
Commit 43d29f7 substantially improves generated ip-address.8 instead of
ip-address.8.in and commit e419f2d removes the generated one losing the
improvements entirely. This commit recovers the lost changes, adapts
them to the current manual page and adds more man page and help
improvements.
Original commit by: Kenyon Ralph <kenyon@kenyonralph.com>
This patch implements support for the IFLA_BR_VLAN_FILTERING attribute
in iproute2 so it can enable/disable vlan_filtering.
Example:
$ ip link set br0 type bridge vlan_filtering 1
$ ip -d link show br0
6: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP mode DEFAULT group default
link/ether 08:00:27:ea:07:38 brd ff:ff:ff:ff:ff:ff promiscuity 0
bridge forward_delay 1500 hello_time 200 max_age 2000 vlan_filtering 1
addrgenmode eui64
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
When showing bridge attributes, show also ageing_time, stp_state and
priority if available.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Add support to be able to set and show the value of tlb_dynamic_lb
(IFLA_BOND_TLB_DYNAMIC_LB).
Example:
$ ip -d link show dev bond0 type bond
7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default
link/ether ce:2f:e1:6e:d7:e0 brd ff:ff:ff:ff:ff:ff promiscuity 0
bond mode balance-tlb miimon 100 updelay 0 downdelay 0 use_carrier 1
arp_interval 0 arp_validate none arp_all_targets any primary_reselect
always fail_over_mac none xmit_hash_policy layer2 resend_igmp 1
num_grat_arp 1 all_slaves_active 0 min_links 0 lp_interval 1
packets_per_slave 1 lacp_rate slow ad_select stable tlb_dynamic_lb 1
addrgenmode eui64
$ ip -d l set dev bond0 type bond tlb_dynamic_lb 0
$ ip -d link show dev bond0 type bond
7: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN
mode DEFAULT group default
link/ether ce:2f:e1:6e:d7:e0 brd ff:ff:ff:ff:ff:ff promiscuity 0
bond mode balance-tlb miimon 100 updelay 0 downdelay 0 use_carrier 1
arp_interval 0 arp_validate none arp_all_targets any primary_reselect
always fail_over_mac none xmit_hash_policy layer2 resend_igmp 1
num_grat_arp 1 all_slaves_active 0 min_links 0 lp_interval 1
packets_per_slave 1 lacp_rate slow ad_select stable tlb_dynamic_lb 0
addrgenmode eui64
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reset the 'preferred_family' global variable
to its initially set value before each batch
file command is processed.
Signed-off-by: Antti Paila <antti.paila@gmail.com>
This patch adds support to set and display protodown on a switch port. The
switch driver can handle this error state by doing a phys down on the port.
One example user space application setting this flag is a multi-chassis
LAG application to handle split-brain situation on peer-link failure.
Example:
root@net-next:~# ip link set eth1 protodown on
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff protodown on
root@net-next:~/iproute2# ip link set eth1 protodown off
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff
root@net-next:~/iproute2#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Prefer using the POSIX constant PATH_MAX instead of the legacy BSD
derived MAXPATHLEN. The necessary includes for MAXPATHLEN and PATH_MAX
are <sys/param.h> and <limits.h>, respectively.
Signed-off-by: Felix Janda <felix.janda@posteo.de>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Make sure that return value of each socket() call is properly checked
and do not continue processing if the call failed.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
We forgot to include this patch somehow. So do it now.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com>
This patch replaces exits with returns in
ip route get command handling. This allows batching
of ip route get commands.
$cat route_get_batch.txt
route get 10.0.14.2
route get 12.0.14.2
route get 10.0.14.4
$ip -batch route_get_batch.txt
local 10.0.14.2 dev lo src 10.0.14.2
cache <local>
12.0.14.2 via 192.168.0.2 dev eth0 src 192.168.0.15
cache
10.0.14.4 dev dummy0 src 10.0.14.2
cache
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
