This patch adds support to lookup a neigh entry
using recently added support in the kernel using RTM_GETNEIGH
example:
$ip neigh get 10.0.2.4 dev test-dummy0
10.0.2.4 dev test-dummy0 lladdr de:ad:be:ef:13:37 PERMANENT
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support to lookup a bridge fdb entry
using recently added support in the kernel using RTM_GETNEIGH
(and AF_BRIDGE family).
example:
$bridge fdb get 02:02:00:00:00:03 dev test-dummy0 vlan 1002
02:02:00:00:00:03 dev test-dummy0 vlan 1002 master bridge
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Tested-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
If two processes attempt to invoke bpf_map_attach() at the same time,
then they will both create maps, then the first will successfully pin
the map to the filesystem and the second will not pin the map, but will
continue operating with a reference to its own copy of the map. As a
result, the sharing of the same map will be broken from the two programs
that were concurrently loaded via loaders using this library.
Fix this by adding a retry in the case where the pinning fails because
the map already exists on the filesystem. In that case, re-attempt
opening a fd to the map on the filesystem as it shows that another
program already created and pinned a map at that location.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Conflicts:
devlink/devlink.c
Fixed the conflict by updating the numbering for all new attributes
after the ones in master branch.
Signed-off-by: David Ahern <dsahern@gmail.com>
This reduces stack usage, as asprintf allocates memory on the heap.
This indirectly fixes a snprintf truncation warning (from gcc v9.2.1):
bpf.c: In function ‘bpf_get_work_dir’:
bpf.c:784:49: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=]
784 | snprintf(bpf_wrk_dir, sizeof(bpf_wrk_dir), "%s/", mnt);
| ^
bpf.c:784:2: note: ‘snprintf’ output between 2 and 4097 bytes into a destination of size 4096
784 | snprintf(bpf_wrk_dir, sizeof(bpf_wrk_dir), "%s/", mnt);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: e42256699c ("bpf: make tc's bpf loader generic and move into lib")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since linux commit 22d6552f827e ("xfrm interface: fix management of
phydev"), phydev is not mandatory anymore.
Note that it also could be useful before the above commit to not force the
user to put a phydev (the kernel was checking it anyway).
For example, it was useful to not set it in case of x-netns, because the
phydev is not available in the current netns:
Before the patch:
$ ip netns add foo
$ ip link add xfrm1 type xfrm dev eth1 if_id 1
$ ip link set xfrm1 netns foo
$ ip -n foo link set xfrm1 type xfrm dev eth1 if_id 2
Cannot find device "eth1"
$ ip -n foo link set xfrm1 type xfrm if_id 2
must specify physical device
Fixes: 286446c1e8 ("ip: support for xfrm interfaces")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Matt Ellison <matt@arroyo.io>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
After commit 6df9c7a06a ("ss: add SK_MEMINFO_DROPS display") ss -m
displays also a drop counter for each socket.
This commit properly document it into the man page.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Broken kernels (not-upstream) can provide wrong empty "comm" field.
It causes to segfault while printing in JSON format.
Fixes: 8ecac46a60 ("rdma: Add QP resource tracking information")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Listen to status notifications coming from kernel during flashing and
put them on stdout to inform user about the status.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Kernel sends notifications about flash update status, so implement these
messages for monitoring.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The 'fw_load_policy' devlink parameter now supports an unknown value.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new devlink parameter along with string to uint
conversion.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
For high speed adapter like Mellanox CX-5 card, it can reach upto
100 Gbits per second bandwidth. Currently htb already supports 64bit rate
in tc utility. However police action rate and peakrate are still limited
to 32bit value (upto 32 Gbits per second). Taking advantage of the 2 new
attributes TCA_POLICE_RATE64 and TCA_POLICE_PEAKRATE64 from kernel,
tc can use them to break the 32bit limit, and still keep the backward
binary compatibility.
Tested-by: David Dai <zdai@linux.vnet.ibm.com>
Signed-off-by: David Dai <zdai@linux.vnet.ibm.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a space after 'blackhole' is missing to properly separate the
protocol when it is given.
Fixes: 63df8e8543 ("Add support for nexthop objects")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
devlink segfaults when using grace_period without reporter
$ devlink health set pci/0000:00:09.0 grace_period 3500
Segmentation fault
devlink is instead supposed to gracefully fail printing a warning
message
$ devlink health set pci/0000:00:09.0 grace_period 3500
Reporter's name is expected.
This happens because DL_OPT_HEALTH_REPORTER_NAME and
DL_OPT_HEALTH_REPORTER_GRACEFUL_PERIOD are both defined as BIT(27).
When dl_opts_put() parse options and grace_period is set, it erroneously
tries to set reporter name to null.
This is fixed simply shifting by 1 bit enumeration starting with
DL_OPT_HEALTH_REPORTER_GRACEFUL_PERIOD.
Fixes: b18d89195b ("devlink: Add devlink health set command")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In the case where we have a large number of nexthops from a specific
protocol, allow the flush and list operations to take a protocol
to limit the commands scopes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Ido Schimmel says:
====================
From: Ido Schimmel <idosch@mellanox.com>
This patchset adds devlink-trap support in iproute2.
Patch #1 increases the number of options devlink can handle.
Patches #2-#3 gradually add support for all devlink-trap commands.
Patch #4 adds a man page for devlink-trap.
See individual commit messages for example usage and output.
Changes in v2:
* Remove report option and monitor command since monitoring is done
using drop monitor
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
These commands are similar to the trap set and show commands, but
operate on a trap group and not individual traps. Example:
# devlink trap group set netdevsim/netdevsim10 group l3_drops action trap
# devlink -jps trap group show netdevsim/netdevsim10 group l3_drops
{
"trap_group": {
"netdevsim/netdevsim10": [ {
"name": "l3_drops",
"generic": true,
"stats": {
"rx": {
"bytes": 0,
"packets": 0
}
}
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The trap set command allows the user to set the action of an individual
trap. Example:
# devlink trap set netdevsim/netdevsim10 trap blackhole_route action trap
The trap show command allows the user to get the current status of an
individual trap or a dump of all traps in case one is not specified.
When '-s' is specified the trap's statistics are shown. When '-v' is
specified the metadata types the trap can provide are shown. Example:
# devlink -jvps trap show netdevsim/netdevsim10 trap blackhole_route
{
"trap": {
"netdevsim/netdevsim10": [ {
"name": "blackhole_route",
"type": "drop",
"generic": true,
"action": "trap",
"group": "l3_drops",
"metadata": [ "input_port" ],
"stats": {
"rx": {
"bytes": 0,
"packets": 0
}
}
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently, the number of supported options is capped at 32 which is a
problem given we are about to add a few more and go over the limit.
Increase the limit to 64 options.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
When displaying a nexthop group made up of other nexthops, the display
line shows this when you have additional data at the end:
id 42 group 43/44/45/46/47/48/49/50/51/52/53/54/55/56/57/58/59/60/61/62/63/64/65/66/67/68/69/70/71/72/73/74proto zebra
Modify code so that it shows:
id 42 group 43/44/45/46/47/48/49/50/51/52/53/54/55/56/57/58/59/60/61/62/63/64/65/66/67/68/69/70/71/72/73/74 proto zebra
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The revert of batchsize accidently reverted more than it should
and broke shared block functionality. Fix this by restoring the
original functionality.
To reproduce:
dst_ip 192.0.2.0/24 action drop
Unknown filter "block", hence option "10" is unparsable
Fixes: e991c04d64 ("Revert "tc: Add batchsize feature for filter and actions"")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add json support on iptunnel and ip6tunnel.
The plain text output format should remain the same.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
RDMA resource tracker now tracks driver QPs as well, add driver QP type
string to qp_types_to_str function.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
'locals' output does not include a leading space so it runs up against
skmem:() output. Add a leading space to fix it.
Signed-off-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Loose the "q" from the names and name the structure fields in the same
way rest of the code does. Also, fix list_add arg order which leads
to segfault.
Fixes: 33267017fa ("iproute2: devlink: port from sys/queue.h to list.h")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add document of setting the adaptive-moderation for the ib device.
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
