Even in brief mode the interface name should be printed
in color if desired. This makes output consistent across
regular and brief mode.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
There is at least three places implementing same things: two in
ipaddress.c print_linkinfo() & print_linkinfo_brief() and one in
bridge/link.c.
They are diverge from each other very little: bridge/link.c does not
support JSON output at the moment and print_linkinfo_brief() does not
handle IFLA_LINK_NETNS case.
Introduce and use print_name_and_link() routine to handle name@link
output in all possible variations; respect IFLA_LINK_NETNS attribute to
handle case when link is in different namespace; use ll_idx_n2a() for
interface name instead of "<nil>" to share logic with other code (e.g.
ll_name_to_index() and ll_index_to_name()) supporting such template.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Be consistent in handling of IFLA_IFNAME attribute in all places: if
there is no attribute report bug to stderr and use ll_idx_n2a() as
last measure to get name in "if%u" format instead of "<nil>".
Use check_ifname() to validate network device name: this catches both
unexpected return from kernel and ll_idx_n2a().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Initializing @inet_prefix using C initializers or memset() seems
inefficient and unnecessary: only small part of ->data[] field will be
used to store address corresponding to ->family.
Instead initialize ->flags with zero and assume no other fields accessed
before checking corresponding bits in ->flags. For example special
helpers (e.g. is_addrtype_*()) can be used to ensure that @inet_prefix
contains valid ip or ipv6 address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add JSON and color output formatting to ip route command.
Similar to existing address and link output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Assume all statistics in ip(8) represented either by IFLA_STATS64 or
IFLA_STATS is 64 bit. It is clean that we can store __u32 counters of
@struct rtnl_link_stats in __u64 counters in @struct rtnl_link_stats64.
New get_rtnl_link_stats_rta() follows __print_link_stats() behaviour on
handling of stats attribute: copy no more than size of data structure
and no less than attribute length zeroing rest.
Drop print_link_stats32() as it's functionality can be handled by 64bit
variant. Move code from __print_link_stats() to print_link_stats64() and
finally rename print_link_stats64() to __print_link_stats().
More users of introduced function will come in future.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Having iplink_parse() and @struct iplink_req in include/utils.h does not
reflect it's IP nature: move to ip/ip_common.h.
Move contents of ip/iplink_xdp.h and ip/iproute_lwtunnel.h to
ip/ip_common.h since they are small (i.e. only two function prototypes):
ip/iplink_bridge.c and ip/iplink_vrf.c prototypes already there.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
First is used to get address from netlink attribute to
inet_prefix data structure. Use memcpy() with constant
value to let complier optimize by replacing a call by
inlining load/store instructions.
Second is used to match address in given netlink attribute
with one given as reference. It matches successfully if
no attribute is given (@rta is NULL), reference address
family is AF_UNSPEC or it's length isn't given; fails if
get_attr_rta() can't get attribute or it's family does
not match reference; calls inet_addr_match() to get final
verdict.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Both geneve and vxlan modules are converted to
use get_addr() we can replace inet_get_addr()
in less problematic places and finally get
rid of inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
It looks very useful to receive additional information
from get_addr_1() and get_addr() about address to simplify
caller and get rid of code duplications.
For now following information can be returned:
1) address is unspecified (zero)
2) address is multicast
3) address is internet: family is either AF_INET or
AF_INET6.
More information can be added in the future.
Introduce inline helpers to make code using this new
address classification interface more self explaining:
bool is_addrtype_inet(inet_prefix *addr)
true if @addr is inet address
bool is_addrtype_inet_unspec(inet_prefix *addr)
true if @addr is unspecified inet address
bool is_addrtype_inet_multi(inet_prefix *addr)
true if @addr is multicast inet address
bool is_addrtype_inet_not_unspec(inet_prefix *addr)
true if @addr is not unspecified inet address
false if @addr is not inet or unspecified inet
bool is_addrtype_inet_not_multi(inet_prefix *addr)
true if @addr is not multicast inet address
false if @addr is not inet or multicast inet
Last two are useful for case when we need inet address
that is not unspecified or multicast.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
For all files in iproute2 which do not have an obvious license
identification, mark them with SPDK GPL-2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adapts the tc command line interface to allow bandwidth limits
to be specified as a percentage of the interface's capacity.
Adding this functionality requires passing the specified device string to
each class/qdisc which changes the prototype for a couple of functions: the
.parse_qopt and .parse_copt interfaces. The device string is a required
parameter for tc-qdisc and tc-class, and when not specified, the kernel
returns ENODEV. In this patch, if the user tries to specify a bandwidth
percentage without naming the device, we return an error from userspace.
Signed-off-by: Nishanth Devarajan<ndev2021@gmail.com>
1. Put the declarations of strlcpy and strlcat inside
an #ifdef NEED_STRLCPY. Their declarations were already in a
similar #ifdef.
2. In bpf_scm.h, include sys/un.h for struct sockaddr_un.
3. In utils.h, include time.h for struct timeval.
Tested: builds on ubuntu 14.04 with "make clean distclean; ./configure && make -j64"
Tested: 4.14.1 builds on Android with Android-specific #ifndefs for missing library code
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Keep it as simple as possible for now: just escape anything that is not
isprint-able, is among the "escape" parameter or '\' as an octal escape
sequence. This should be pretty easy to extend if any other user needs
something more complex in the future.
Signed-off-by: Ivan Delalande <colona@arista.com>
The original problem was that something like:
| strncpy(ifr.ifr_name, *argv, IFNAMSIZ);
might leave ifr.ifr_name unterminated if length of *argv exceeds
IFNAMSIZ. In order to fix this, I thought about replacing all those
cases with (equivalent) calls to snprintf() or even introducing
strlcpy(). But as Ulrich Drepper correctly pointed out when rejecting
the latter from being added to glibc, truncating a string without
notifying the user is not to be considered good practice. So let's
excercise what he suggested and reject empty, overlong or otherwise
invalid interface names right from the start - this way calls to
strncpy() like shown above become safe and the user has a chance to
reconsider what he was trying to do.
Note that this doesn't add calls to check_ifname() to all places where
user supplied interface name is parsed. In many cases, the interface
must exist already and is therefore looked up using ll_name_to_index(),
so if_nametoindex() will perform the necessary checks already.
Signed-off-by: Phil Sutter <phil@nwl.cc>
By making use of strncpy(), both implementations are really simple so
there is no need to add libbsd as additional dependency.
Signed-off-by: Phil Sutter <phil@nwl.cc>
BIT() macro was implemented and used by devlink for now, but following
patches of rdmatool will reuse the same macro, so put it in common
header file.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Kernel now supports up to 30 labels but not defined as part of the uapi.
iproute2 handles up to 8 labels but in a non-consistent way. Update ip
to handle more labels, but in a more programmatic way.
For the MPLS address family, the data field in inet_prefix is used for
labels. Increase that field to 64 u32's -- 64 as nothing more than a
convenient power of 2 number.
Update mpls_pton to take the length of the address field, convert that
length to number of labels and add better error handling to the parsing
of the user supplied string.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
'ip vrf pids' is used to list processes bound to a vrf, but it only
shows the pid leaving a lot of work for the user. Add the command
name to the output. With this patch you get the more user friendly:
$ ip vrf pids mgmt
1121 ntpd
1418 gdm-session-wor
1488 gnome-session
1491 dbus-launch
1492 dbus-daemon
1565 sshd
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add make_path to recursively call mkdir as needed to create a given
path with the given mode.
Add find_cgroup2_mount to lookup path where cgroup2 is mounted. If it
is not already mounted, cgroup2 is mounted under /var/run/cgroup2 for
use by iproute2.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Now that we made the BPF loader generic as a library, reuse it
for loading XDP programs as well. This basically adds a minimal
start of a facility for iproute2 to load XDP programs. There
currently only exists the xdp1_user.c sample code in the kernel
tree that sets up netlink directly and an iovisor/bcc front-end.
Since we have all the necessary infrastructure in place already
from tc side, we can just reuse its loader back-end and thus
facilitate migration and usability among the two for people
familiar with tc/bpf already. Sharing maps, performing tail calls,
etc works the same way as with tc. Naturally, once kernel
configuration API evolves, we will extend new features for XDP
here as well, resp. extend dumping of related netlink attributes.
Minimal example:
clang -target bpf -O2 -Wall -c prog.c -o prog.o
ip [-force] link set dev em1 xdp obj prog.o # attaching
ip [-d] link # dumping
ip link set dev em1 xdp off # detaching
For the dump, intention is that in the first line for each ip
link entry, we'll see "xdp" to indicate that this device has an
XDP program attached. Once we dump some more useful information
via netlink (digest, etc), idea is that 'ip -d link' will then
display additional relevant program information below the "link/
ether [...]" output line for such devices, for example.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
If we have multicast routes and do ip route show table all we'll get the
following output:
...
multicast ???/32 from ???/32 table default proto static iif eth0
The "???" are because the rtm_family is set to RTNL_FAMILY_IPMR instead
(or RTNL_FAMILY_IP6MR for ipv6). Add a simple workaround that returns the
real family based on the rtm_type (always RTN_MULTICAST for ipmr routes)
and the rtm_family. Similar workaround is already used in ipmroute, and
we can use this helper there as well.
After the patch the output is:
multicast 239.10.10.10/32 from 0.0.0.0/32 table default proto static iif eth0
Also fix a minor whitespace error and switch to tabs.
Reported-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Add two NLA's that allow configuration of Infiniband node or port GUIDs
by referencing the IPoIB net device set over the physical function. The
format to be used is as follows:
ip link set dev ib0 vf 0 node_guid 00:02:c9:03:00:21:6e:70
ip link set dev ib0 vf 0 port_guid 00:02:c9:03:00:21:6e:78
Signed-off-by: Eli Cohen <eli@mellanox.com>
There is only a single user who needs it to be reentrant (not really,
but it's safer like this), add rt_addr_n2a_r() for it to use.
Signed-off-by: Phil Sutter <phil@nwl.cc>
There are only three users which require it to be reentrant, the rest is
fine without. Instead, provide a reentrant format_host_r() for users
which need it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Netlink already provides hello_timer, tcn_timer, topology_change_timer
and gc_timer, so let's make them visible.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch:
- Adds a utility function for parsing a 64 bit address
- Adds a utility function for converting a 64 bit address to ASCII
- Adds and ILA encap type in lwt tunnels
Signed-off-by: Tom Herbert <tom@herbertland.com>
The recently introduced object pinning can be further extended in order
to allow sharing maps beyond tc namespace. F.e. maps that are being pinned
from tracing side, can be accessed through this facility as well.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
This larger work addresses one of the bigger remaining issues on
tc's eBPF frontend, that is, to allow for persistent file descriptors.
Whenever tc parses the ELF object, extracts and loads maps into the
kernel, these file descriptors will be out of reach after the tc
instance exits.
Meaning, for simple (unnested) programs which contain one or
multiple maps, the kernel holds a reference, and they will live
on inside the kernel until the program holding them is unloaded,
but they will be out of reach for user space, even worse with
(also multiple nested) tail calls.
For this issue, we introduced the concept of an agent that can
receive the set of file descriptors from the tc instance creating
them, in order to be able to further inspect/update map data for
a specific use case. However, while that is more tied towards
specific applications, it still doesn't easily allow for sharing
maps accross multiple tc instances and would require a daemon to
be running in the background. F.e. when a map should be shared by
two eBPF programs, one attached to ingress, one to egress, this
currently doesn't work with the tc frontend.
This work solves exactly that, i.e. if requested, maps can now be
_arbitrarily_ shared between object files (PIN_GLOBAL_NS) or within
a single object (but various program sections, PIN_OBJECT_NS) without
"loosing" the file descriptor set. To make that happen, we use eBPF
object pinning introduced in kernel commit b2197755b263 ("bpf: add
support for persistent maps/progs") for exactly this purpose.
The shipped examples/bpf/bpf_shared.c code from this patch can be
easily applied, for instance, as:
- classifier-classifier shared:
tc filter add dev foo parent 1: bpf obj shared.o sec egress
tc filter add dev foo parent ffff: bpf obj shared.o sec ingress
- classifier-action shared (here: late binding to a dummy classifier):
tc actions add action bpf obj shared.o sec egress pass index 42
tc filter add dev foo parent ffff: bpf obj shared.o sec ingress
tc filter add dev foo parent 1: bpf bytecode '1,6 0 0 4294967295,' \
action bpf index 42
The toy example increments a shared counter on egress and dumps its
value on ingress (if no sharing (PIN_NONE) would have been chosen,
map value is 0, of course, due to the two map instances being created):
[...]
<idle>-0 [002] ..s. 38264.788234: : map val: 4
<idle>-0 [002] ..s. 38264.788919: : map val: 4
<idle>-0 [002] ..s. 38264.789599: : map val: 5
[...]
... thus if both sections reference the pinned map(s) in question,
tc will take care of fetching the appropriate file descriptor.
The patch has been tested extensively on both, classifier and
action sides.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds support to parse and print lwtunnel
encapsulation attributes attached to routes for MPLS
and IP tunnels.
example:
Add ipv4 route with mpls encap attributes:
Examples:
MPLS:
$ ip route add 40.1.2.0/30 encap mpls 200 via inet 40.1.1.1 dev eth3
$ ip route show
40.1.2.0/30 encap mpls 200 via 40.1.1.1 dev eth3
Add ipv4 multipath route with mpls encap attributes:
$ ip route add 10.1.1.0/30 nexthop encap mpls 200 via 10.1.1.1 dev eth0 \
nexthop encap mpls 700 via 40.1.1.2 dev eth3
$ ip route show
10.1.1.0/30
nexthop encap mpls 200 via 10.1.1.1 dev eth0 weight 1
nexthop encap mpls 700 via 40.1.1.2 dev eth3 weight 1
IP:
$ ip route add 10.1.1.1/24 encap ip id 200 dst 20.1.1.1 dev vxlan0
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Jiri Benc <jbenc@redhat.com>
When having optional classid, most minimal command can be sth
like:
tc filter add dev foo parent X: bpf obj prog.o
Therefore, adapt the code so that a next argument will not be
enforced as the case currently.
Also, minor cleanup on the classid, where we should rather
have used addattr32(), and add flags for exec configuration,
for example (using short notation):
tc filter add dev foo parent X: bpf da obj prog.o
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
This adds support for slightly less output than is normally provided by
'ip link show' and 'ip addr show'. This is a bit better when you have a
host with lots of interfaces. Sample output:
$ ip -br link show
lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
p2p1 UP 08:00:27:ee:0b:3b <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
p8p1 DOWN 08:00:27:dc:d8:ca <NO-CARRIER,BROADCAST,MULTICAST,UP>
p9p1 UP 08:00:27:76:d9:75 <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1.100@p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
$ ip -br -4 addr show
lo UNKNOWN 127.0.0.1/8
p2p1 UP 192.168.56.2/24
p7p1 UP 70.0.0.1/24
p8p1 DOWN 80.0.0.1/24
p9p1 UP 10.0.5.15/24
p7p1.100@p7p1 UP 200.0.0.1/24
$ ip -br -6 addr show
lo UNKNOWN ::1/128
p2p1 UP fe80::a00:27ff:feee:b3b/64
p7p1 UP 7000::1/8 fe80::a00:27ff:fe9d:629f/64
p8p1 DOWN 8000::1/8
p9p1 UP fe80::a00:27ff:fe76:d975/64
p7p1.100@p7p1 UP fe80::a00:27ff:fe9d:629f/64
$ ip -br addr show p7p1
p7p1 UP 70.0.0.1/24 7000::1/8 fe80::a00:27ff:fe9d:629f/64
v2: Now with color support!
v3: Better field width estimation (except netdev names to keep output at a
decent width) and whitespace fixup.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
This work finalizes both eBPF front-ends for the classifier and action
part in tc, it allows for custom ELF section selection, a simplified tc
command frontend (while keeping compat), reusing of common maps between
classifier and actions residing in the same object file, and exporting
of all map fds to an eBPF agent for handing off further control in user
space.
It also adds an extensive example of how eBPF can be used, and a minimal
self-contained example agent that dumps map data. The example is well
documented and hopefully provides a good starting point into programming
cls_bpf and act_bpf.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
- Pull in the uapi mpls.h
- Update rtnetlink.h to include the mpls rtnetlink notification multicast group.
- Define AF_MPLS in utils.h if it is not defined from elsewhere
as is done with AF_DECnet
The address syntax for multiple mpls labels is a complete invention.
When I looked there seemed to be no wide spread convention for talking
about an mpls label stack in text for. Sometimes people did:
"{ Label1, Label2, Label3 }", sometimes people would do:
"[ label3, label2, label1 ]", and most of the time label
stacks were not explicitly shown at all.
The syntax I wound up using, so it would not have spaces and so it
would visually distinct from other kinds of addresses is.
label1/label2/label3 Where label1 is the label at the top of the label
stack and label3 is the label at the bottom on the label stack.
When there is a single label this matches what seems to be convention
with other tools. Just print out the numeric value of the mpls label.
The netlink protocol for labels uses the on the wire format for a
label stack. The ttl and traffic class are expected to be 0. Using
the on the wire format is common and what happens with other address
types. BGP when passing label stacks also uses this technique with the
exception that the ttl byte is not included making each label in a BGP
label stack 3 bytes instead of 4.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
