fix output of "ip address help" and "ip link help". Update TYPE list in man
pages ip-address.8 and ip-link.8 as well.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
This big patch was compiled by vimgrepping for memset calls and changing
to C99 initializer if applicable. One notable exception is the
initialization of union bpf_attr in tc/tc_bpf.c: changing it would break
for older gcc versions (at least <=3.4.6).
Calls to memset for struct rtattr pointer fields for parse_rtattr*()
were just dropped since they are not needed.
The changes here allowed the compiler to discover some unused variables,
so get rid of them, too.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Add two NLA's that allow configuration of Infiniband node or port GUIDs
by referencing the IPoIB net device set over the physical function. The
format to be used is as follows:
ip link set dev ib0 vf 0 node_guid 00:02:c9:03:00:21:6e:70
ip link set dev ib0 vf 0 port_guid 00:02:c9:03:00:21:6e:78
Signed-off-by: Eli Cohen <eli@mellanox.com>
Add vrf keyword to 'ip link' and 'ip addr' commands (common list code).
Allows:
1. Adding a link to a VRF
$ ip link set NAME vrf NAME
Removing a link from a VRF still uses 'ip link set NAME nomaster'
2. Showing links associated with a VRF:
$ ip link show vrf NAME
3. List addresses associated with links in a VRF
$ ip -br addr show vrf red
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
I forgot to change the variable in the conditional, too.
Fixes: 8fe58d5894 ("iplink: Check address length via netlink")
Signed-off-by: Phil Sutter <phil@nwl.cc>
This is a feature which was lost during the conversion to netlink
interface: If the device exists and a user tries to change the link
layer address, query the kernel for the old address first and reject the
new one if sizes differ.
This patch adds the same check when setting VF address by assuming same
length as PF device.
Note that at least for VFs the check can't be done in kernel space since
struct ifla_vf_mac lacks a length field and due to netlink padding the
exact size can't be communicated to the kernel.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Add IFLA_VF_TRUST message to trust the VF.
PF can accept some privileged operation from the trusted VF.
For example, ixgbe PF doesn't allow to enable VF promiscuous mode until
the VF is trusted because it may hurt performance.
To trust VF.
# ip link set dev eth0 vf 1 trust on
To untrust VF.
# ip link set dev eth0 vf 1 trust off
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
This patch replaces exits with returns in iplink
command. Helps to continue on errors when
invoked with ip -force -batch.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
"random" is a new IPv6 addrgenmode, enabling "stable_secret" type
addresses with an auto-generated secret.
$ ip link set eth0 addrgenmode random
$ ip -d link show dev eth0
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 00:21:86:a3:25:7d brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode random
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
It is possible to switch to another addrgenmode after setting a
valid secret. Allow switching back without reconfiguring the
secret for completeness.
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Device names that match "help" or a prefix thereof should be allowed anywhere
a device name can be used. Note that a suitable keyword ("dev" or "name", the
latter for "ip tunnel") has to be used in these cases to resolve ambiguities.
Signed-off-by: Christoph Schulz <develop@kristov.de>
Reported-by: Leonhard Preis <leonhard@pre.is>
Reported-by: Wilhelm Wijkander <lists@0x5e.se>
Commit 0532555 ('Support "ip link add help" for rtnl_link API') added a
check for specified help parameter. Though due to the place where it has
been added to, it is not possible anymore to force a given parameter to
be interpreted as interface name by prefixing it with 'dev '. Fix this
by forcing whatever follows 'dev' to be presumed as interface name.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This adds support for slightly less output than is normally provided by
'ip link show' and 'ip addr show'. This is a bit better when you have a
host with lots of interfaces. Sample output:
$ ip -br link show
lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
p2p1 UP 08:00:27:ee:0b:3b <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
p8p1 DOWN 08:00:27:dc:d8:ca <NO-CARRIER,BROADCAST,MULTICAST,UP>
p9p1 UP 08:00:27:76:d9:75 <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1.100@p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
$ ip -br -4 addr show
lo UNKNOWN 127.0.0.1/8
p2p1 UP 192.168.56.2/24
p7p1 UP 70.0.0.1/24
p8p1 DOWN 80.0.0.1/24
p9p1 UP 10.0.5.15/24
p7p1.100@p7p1 UP 200.0.0.1/24
$ ip -br -6 addr show
lo UNKNOWN ::1/128
p2p1 UP fe80::a00:27ff:feee:b3b/64
p7p1 UP 7000::1/8 fe80::a00:27ff:fe9d:629f/64
p8p1 DOWN 8000::1/8
p9p1 UP fe80::a00:27ff:fe76:d975/64
p7p1.100@p7p1 UP fe80::a00:27ff:fe9d:629f/64
$ ip -br addr show p7p1
p7p1 UP 70.0.0.1/24 7000::1/8 fe80::a00:27ff:fe9d:629f/64
v2: Now with color support!
v3: Better field width estimation (except netdev names to keep output at a
decent width) and whitespace fixup.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Allow user to create a vrf device and specify its table binding.
Based on the iplink_vlan implementation.
Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
This patch adds support to set and display protodown on a switch port. The
switch driver can handle this error state by doing a phys down on the port.
One example user space application setting this flag is a multi-chassis
LAG application to handle split-brain situation on peer-link failure.
Example:
root@net-next:~# ip link set eth1 protodown on
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff protodown on
root@net-next:~/iproute2# ip link set eth1 protodown off
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff
root@net-next:~/iproute2#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
There have been several instances where response from kernel
has overrun the stack buffer from the caller. Avoid future problems
by passing a size argument.
Also drop the unused peer and group arguments to rtnl_talk.
Add a new option to toggle the ability of querying the RSS configuration of a specific VF.
VF RSS information like RSS hash key may be considered sensitive on some devices where
this information is shared between VF and PF and thus its querying may be prohibited by default.
This new option allows a system administrator with privileges to modify a PF state
to control if the above VF querying is allowed or not.
For example:
To enable RSS querying of VF[0] of ethX:
>> ip link set dev ethX vf 0 query_rss on
Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Show deleting by group in 'ip link help' output:
...
ip link delete { DEVICE | dev DEVICE | group DEVGROUP } type TYPE [ ARGS ]
...
Also show separately DEVICE option in { } list.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
This new attribute is now advertised by the kernel for x-netns interfaces.
It's also possible to set it when an interface is created (and thus creating a
x-netns interface with one single message).
Example:
$ ip netns add foo
$ ip netns add bar
$ ip -n foo netns set bar 15
$ ip -n foo link add ipip1 link-netnsid 15 type ipip remote 10.16.0.121 local 10.16.0.249
$ ip -n foo link ls ipip1
3: ipip1@NONE: <POINTOPOINT,NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default
link/ipip 10.16.0.249 peer 10.16.0.121 link-netnsid 15
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Added new option 'type' to 'ip link show'
command which allows to filter devices by type:
ip link show type bridge
ip link show type vlan
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Adding basic support to create virtual devices using 'ip'
utility. Following is the syntax -
ip link add link <master> <virtual> type ipvlan mode [ l2 | l3 ]
e.g. ip link add link eth0 ipvl0 type ipvlan mode l3
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Tim Hockin <thockin@google.com>
Cc: Brandon Philips <brandon.philips@coreos.com>
Cc: Pavel Emelianov <xemul@parallels.com>
Allow to print particular link type usage by:
ip link help [TYPE]
Currently to print usage for some link type it is needed
to use the following way:
ip link { add | del | set } type TYPE help
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Since commit 3c682146ae, iplink requires assigning negative
ifindex (-1) to the kernel when creating interface without
specifying index.
v2: checking whether index is -1, suggested by Cong Wang.
Cc: Cong Wang <cwang@twopensource.com>
Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp>
Acked-by: Cong Wang <cwang@twopensource.com>
This patch adds the necessary changes to allow altering a slave device's
options via ip link set <device> type <master type>_slave specific-option.
It also adds support to set the bonding slaves' queue_id.
Example:
ip link set eth0 type bond_slave queue_id 10
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
The real checking is performed later in iplink_modify(..) func which
checks device existence if NLM_F_CREATE flag is set.
Also it fixes the case when impossible to add veth link which was
caused by 9a02651a87 (ip: check for missing dev arg when doing VF rate)
because these devices are not exist yet.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
