Conflicts:
ip/iproute_lwtunnel.c
In addition to merge conflict between bd59e5b151 and 94a8722f2f,
updated the code added by the latter commit based on the change of the
former (ie., added ret = to the new rta_addattr_l).
Signed-off-by: David Ahern <dsahern@gmail.com>
The port capability mask represents IBTA PortInfo specification,
but as it is written in description of kernel commit 2f944c0fbf58
("RDMA: Fix storage of PortInfo CapabilityMask in the kernel"),
the bit 26 was mistakenly overwritten.
The rdmatool followed it too and mislead users by presenting wrong
value. Since it never showed proper value, we update the whole
port_cap_mask to comply with IBTA and show real HW values.
Fixes: da990ab40a ("rdma: Add link object")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If an error happens in multi-segment message (tc only)
then report the error and stop processing further responses.
This also fixes refering to the buffer after free.
The sequence check is not necessary here because the
response message has already been validated to be in
the window of the sequence number of the iov.
Reported-by: Mahesh Bandewar <mahesh@bandewar.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Similar to the previous patch for no-split-gso, the negative keywords for
'nat', 'wash' and 'ack-filter' were not printed either. Add those well.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The bridge mdb show is broken on current iproute2. e.g.
]# bridge mdb show
34: br0 veth0_br 224.1.1.2 temp 34: br0 veth0_br 224.1.1.1 temp
After fix:
]# bridge mdb show
34: br0 veth0_br 224.1.1.2 temp
34: br0 veth0_br 224.1.1.1 temp
v2: Use json print lib as Stephen suggested.
v3: No need to use is_json_context() as print_string() could handle both cases.
v4: use new function print_nl() to print new line in non-json mode.
Reported-by: Ying Xu <yinxu@redhat.com>
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When the GSO splitting was turned into dual split-gso/no-split-gso options,
the printing of the latter was left out. Add that, so output is consistent
with the options passed.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Common pattern in iproute commands is to print a line seperator
in non-json mode. Make that a simple function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It was possible to crash ip-route by adding an IPv6 route with 37
nexthop statements. A simple reproducer is:
| for i in `seq 37`; do
| nhs="nexthop via 1111::$i "$nhs
| done
| ip -6 route add 3333::/64 $nhs
The related code was broken in multiple ways:
* parse_one_nh() assumed that rta points to 4kB of storage but caller
provided just 1kB. Fixed by passing 'len' parameter with the correct
value.
* Error checking of rta_addattr*() calls in parse_one_nh() and called
functions was completely absent, so with above fix in place output
flood would occur due to parser looping forever.
While being at it, increase message buffer sizes to 4k. This allows for
at most 144 nexthops.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Print the name of the argument that wasn't understood.
Signed-off-by: Caleb Raitto <caraitto@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The output of vlan show was broken previous change to use json_print.
Clean the code up and return to original format.
Note: the JSON syntax has changed to make the bridge vlan
show more like other outputs (e.g. ip -j li show).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Rather than using is_json_context(), use the print_string functions
which handle both cases.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Yousuk Seung says:
====================
This series adds support for the new "slot" netem parameter for
slotting. Slotting is an approximation of shared media that gather up
packets within a varying delay window before delivering them nearly at
once.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
Extend slotting with support for non-uniform distributions. This is
similar to netem's non-uniform distribution delay feature.
Syntax:
slot distribution DISTRIBUTION DELAY JITTER [packets MAX_PACKETS] \
[bytes MAX_BYTES]
The syntax and use of the distribution table is the same as in the
non-uniform distribution delay feature. A file DISTRIBUTION must be
present in TC_LIB_DIR (e.g. /usr/lib/tc) containing numbers scaled by
NETEM_DIST_SCALE. A random value x is selected from the table and it
takes DELAY + ( x * JITTER ) as delay. Correlation between values is not
supported.
Examples:
Normal distribution delay with mean = 800us and stdev = 100us.
> tc qdisc add dev eth0 root netem slot distribution normal \
800us 100us
Optionally set the max slot size in bytes and/or packets.
> tc qdisc add dev eth0 root netem slot distribution normal \
800us 100us bytes 64k packets 42
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Slotting is a crude approximation of the behaviors of shared media such
as cable, wifi, and LTE, which gather up a bunch of packets within a
varying delay window and deliver them, relative to that, nearly all at
once.
It works within the existing loss, duplication, jitter and delay
parameters of netem. Some amount of inherent latency must be specified,
regardless.
The new "slot" parameter specifies a minimum and maximum delay between
transmission attempts.
The "bytes" and "packets" parameters can be used to limit the amount of
information transferred per slot.
Examples of use:
tc qdisc add dev eth0 root netem delay 200us \
slot 800us 10ms bytes 64k packets 42
A more correct example, using stacked netem instances and a packet limit
to emulate a tail drop wifi queue with slots and variable packet
delivery, with a 200Mbit isochronous underlying rate, and 20ms path
delay:
tc qdisc add dev eth0 root handle 1: netem delay 20ms rate 200mbit \
limit 10000
tc qdisc add dev eth0 parent 1:1 handle 10:1 netem delay 200us \
slot 800us 10ms bytes 64k packets 42 limit 512
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Using a 32 bit field to represent time in nanoseconds results in a
maximum value of about 4.3 seconds, which is well below many observed
delays in WiFi and LTE, and barely in the ballpark for a trip past the
Earth's moon, Luna.
Using 64 bit time fields in nanoseconds allows us to simulate
network diameters of several hundred light-years. However, only
conversions to and from ns, us, ms, and seconds are provided.
The iproute2 64 bit api uses signed values for time. Being able to
represent positive or negative time allows us to calculate +/- deltas
between, for example, the CLOCK_TAI and CLOCK_REALTIME clocks.
Time related utility functions in tc_util.c are moved to lib/utils.c.
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since introduction of htb module, this variable has never been used.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
These are primarily fixes for "string is not string literal" warnings
/ errors (with -Werror -Wformat-nonliteral). This should be a no-op
change. I had to replace couple of print helper functions with the
code they call as it was becoming harder to eliminate these warnings,
however these helpers were used only at couple of places, so no
major change as such.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When creating socket() AF_INET is used irrespective of the family
that is given at the command-line (with -4, -6, or -0). This change
will open the socket with the preferred family.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
UNIX_DIAG_VFS and UNIX_DIAG_ICONS are never used by ss,
make them available in ss -e output.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When adding support for JSON output the new code for printing
the destination prefix adds a stray blank character before
the bitmask. This causes some user-space parsing to fail.
Current output:
...: from x.x.x.x/l to y.y.y.y /l
Previous output:
...: from x.x.x.x/l to y.y.y.y/l
Fixes: 0dd4ccc5 "iprule: add json support"
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since CAKE now has three different settings that can be overridden by tc
filters (priority and host and flow hashes), documenting how they work is
probably a good idea.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Some distributions like Debian nowadays restrict the dmesg command to
root-only. Run it with sudo in the testsuite.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The generate_nlmsg binary is required but make -C testsuite compile
does not build it. Add the necessary includes and C*FLAGS to the tools
Makefile and have the compile target build it.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Some generated test files were not removed, including one executable in
the testsuite/tools directory.
Ensure make clean from the top level directory works for the testsuite
subdirs too, and that all the files are removed.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Once there are more than a certain number of kernel config options
set (this happened for us with kernel 4.17), the method of passing
those as command line arguments exceeds the maximum number of
arguments the shell supports. This causes the whole testsuite to
fail.
Instead, create a temporary file and modify its contents so that
the config option variables are exported. Then this file can be
sourced in before running the tests.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As suggested, turn return code into true/false although it's not checked
anywhere yet.
Fixes: 4d82962ccc ("Merge common code for conditionally colored output")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow for -color={never,auto,always} to have colored output disabled,
enabled only if stdout is a terminal or enabled regardless of stdout
state.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This allows the user to specify the LWTUNNEL_IP_SRC/LWTUNNEL_IP6_SRC
when setting an lwtunnel encapsulation route.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add missing --pretty and --json options, correct --zero to --zeros and
correct the mess around --scan/--interval including broken man page
formatting.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The '| help' part was misleading: In fact, 'genl help' does not work but
'genl <OBJECT> help' does. Fix the help text to make that clear.
In addition to that, list -Version and -help flags as well.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This was the only bit missing in comparison to devlink help text.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Typically the part of the flag in brackets completes the leading part
instead of repeating it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Change curly braces into brackets for -json option in help text to be
consistent with the rest.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
