Passing the return value of RTA_DATA() to rta_getattr_u32() is wrong
since that function will call RTA_DATA() by itself already.
Fixes: a7ad1c8a68 ("ipaddrlabel: add json support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
iproute2 walks through the list of available tunnels using netlink
protocol in order to get device info instead of reading
them from proc filesystem. However the kernel reports device statistics
using IFLA_INET6_STATS/IFLA_INET6_ICMP6STATS attributes nested in
IFLA_PROTINFO one but iproutes expects these info in
IFLA_STATS64/IFLA_STATS attributes.
The issue can be triggered with the following reproducer:
$ip link add ip6d0 type ip6tnl mode ip6ip6 local 1111::1 remote 2222::1
$ip -6 -d -s tunnel show ip6d0
ip6d0: ipv6/ipv6 remote 2222::1 local 1111::1 encaplimit 4 hoplimit 64
tclass 0x00 flowlabel 0x00000 (flowinfo 0x00000000)
Dump terminated
Fix the issue introducing IFLA_INET6_STATS attribute parsing
Fixes: 3e95393871 ("iptunnel/ip6tunnel: Use netlink to walk through
tunnels list")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Introduce snmp header file. It will be used in subsequent patch in
order to parse device statistics reported in
IFLA_INET6_STATS/IFLA_INET6_ICMP6STATS netlink attributes
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
I seem to have had a massive brainfart with uses of
parse_rtattr_nested(). The rtattr* array must have MAX+1 elements, and
the call to parse_rtattr_nested must have MAX as its bound. Let's fix
those.
Fixes: b26fc590ce ("ip: add MACsec support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Stephen converted macsec's sci to use 0xhex, but 0xhex handles
unsigned int's, not 64 bits ints. Thus, the output of the "ip macsec
show" command is mangled, with half of the SCI replaced with 0s:
# ip macsec show
11: macsec0: [...]
cipher suite: GCM-AES-128, using ICV length 16
TXSC: 0000000001560001 on SA 0
# ip -d link show macsec0
11: macsec0@ens3: [...]
link/ether 52:54:00:12:01:56 brd ff:ff:ff:ff:ff:ff promiscuity 0
macsec sci 5254001201560001 [...]
where TXSC and sci should match.
Fixes: c0b904de62 ("macsec: support JSON")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
While migrating to JSON print library, some keywords were dropped from
standard output by accident. Add them back to unbreak output parsers.
Fixes: c7c1a1ef51 ("bridge: colorize output and use JSON print library")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for the new backup port option that can be set
on a bridge port. If the port's carrier goes down all of the traffic
gets redirected to the configured backup port. We add the following new
arguments:
$ ip link set dev brport type bridge_slave backup_port brport2
$ ip link set dev brport type bridge_slave nobackup_port
$ bridge link set dev brport backup_port brport2
$ bridge link set dev brport nobackup_port
The man pages are updated respectively.
Also 2 minor style adjustments:
- add missing space to bridge man page's state argument
- use lower starting case for vlan_tunnel in ip-link man page (to be
consistent with the rest)
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Adds new option extern_learn to set NTF_EXT_LEARNED flag
on neigh entries.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
In __rtnl_talk_iov() main loop, err is a pointer to memory in dynamically
allocated 'buf' that is used to store netlink messages. If netlink message
is an error message, buf is deallocated before returning with error code.
However, on return err->error code is checked one more time to generate
return value, after memory which err points to has already been
freed. Save error code in temporary variable and use the variable to
generate return value.
Fixes: c60389e4f9 ("libnetlink: fix leak and using unused memory on error")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Print limits correctly in JSON context.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Vinicius Costa Gomes says:
====================
This is the iproute2 side of the taprio v1 series.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
This documents the parameters and provides an example of usage.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This function retrieves a signed 32-bit integer from a netlink message
and returns it.
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This allows signed 64-bit integers to be retrieved from a netlink
message.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add this helper to read signed 64-bit integers from a string.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Recently flower classifier was updated to expose count of devices that
filter is offloaded to. Add support to print this counter as 'in_hw_count'.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
We should only show ttl inherit when IFLA_VXLAN_TTL_INHERIT supplied.
Otherwise show the ttl number, or auto when it is 0.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
David Ahern says:
====================
iproute2 currently uses ifinfomsg as the header for all dumps using the
wilddump headers. This is wrong as each message type actually has its own
header type. While the kernel has traditionally let it go as it for the
most part only uses the family entry, the use of kernel side filters is
increasing to alter what is returned on a request. The kernel side filters
really need to use the proper header type.
To that end, fix iproute2 to use the proper header struct for the GET type.
====================
Signed-off-by: David Ahern <dsahern@gmail.com>
rtnl_wilddump_stats_req_filter only takes RTM_GETSTATS as the type argument
so rename to rtnl_statsdump_req_filter for consistency with other request
functions and hardcode the type argument.
Signed-off-by: David Ahern <dsahern@gmail.com>
Rename rtnl_wilddump_req_filter to rtnl_linkdump_req_filter,
rtnl_wilddump_request to rtnl_linkdump_req and
rtnl_wilddump_req_filter_fn to rtnl_linkdump_req_filter_fn.
In all cases drop the type argument which at this point is only
RTM_GETLINK and hardcode in the functions.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_nsiddump_req for namespace id dumps using the proper rtgenmsg
as the header. Convert existing RTM_GETNSID dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_neightbldump_req for neighbor table dumps using the proper ndtmsg
as the header. Convert existing RTM_GETNEIGHTBL dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_neighdump_req for neighbor dumps using the proper ndmsg
as the header. Convert existing rtnl_wilddump_request for RTM_GETNEIGH
to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_ruledump_req for fib fule dumps using the proper fib_rule_hdr
as the header. Convert existing RTM_GETRULE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_netconfdump_req for netconf dumps using the proper netconfmsg
as the header. Convert existing RTM_GETNETCONF dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_mdbdump_req for mdb dumps using the proper br_port_msg as
the header. Convert existing RTM_GETMDB dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_addrlbldump_req for address label dumps using the proper
ifaddrlblmsg as the header. Convert existing RTM_GETADDRALBEL dumps
to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_routedump_req for route dumps using the proper rtmsg
as the header. Convert existing RTM_GETROUTE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_addrdump_req for address dumps using the proper ifaddrmsg
as the header. Convert existing RTM_GETADDR dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow matching on options in Geneve tunnel headers.
The options can be described in the form
CLASS:TYPE:DATA/CLASS_MASK:TYPE_MASK:DATA_MASK, where CLASS is
represented as a 16bit hexadecimal value, TYPE as an 8bit
hexadecimal value and DATA as a variable length hexadecimal value.
e.g.
# ip link add name geneve0 type geneve dstport 0 external
# tc qdisc add dev geneve0 ingress
# tc filter add dev geneve0 protocol ip parent ffff: \
flower \
enc_src_ip 10.0.99.192 \
enc_dst_ip 10.0.99.193 \
enc_key_id 11 \
geneve_opts 0102:80:1122334421314151/ffff:ff:ffffffffffffffff \
ip_proto udp \
action mirred egress redirect dev eth1
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While at it also add missing text for proxy in the man page.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new sticky flag that can be set on fdbs and update the
man page.
CC: David Ahern <dsahern@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Change to error handling broke normal code.
Fixes: c60389e4f9 ("libnetlink: fix leak and using unused memory on error")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Take into account the configured preferred_family if neither saddr or
daddr are provided since otherwise vxlan kernel module will use IPv4 as
default remote inet family neglecting the one provided by userspace.
This behaviour was originally in commit 97d564b90c ("vxlan: use
preferred address family when neither group or remote is specified").
The issue can be triggered with the following reproducer:
$ip -6 link add vxlan1 type vxlan id 42 dev enp0s2 \
proxy nolearning l2miss l3miss
$bridge fdb add 46:47:1f:a7:1c:25 dev vxlan1 dst 2000::2
RTNETLINK answers: Address family not supported by protocol
Fixes: 1e9b8072de ("iplink_vxlan: Get rid of inet_get_addr()")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
After commit d42c7891d2 ("utils: Do not reset family for default, any,
all addresses"), when call get_addr() for any/all addresses, we will set
addr->flags to ADDRTYPE_INET_UNSPEC if family is AF_INET/AF_INET6, which
makes is_addrtype_inet() checking passed and assigns incorrect address
to kernel. The ip link cmd will return error like:
]# ip link add ipip1 type ipip local any remote 1.1.1.1
RTNETLINK answers: Numerical result out of range
Fix it by using is_addrtype_inet_not_unspec() to avoid unspec addresses.
geneve, vxlan are not affected as they use AF_UNSPEC family when call
get_addr()
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: d42c7891d2 ("utils: Do not reset family for default, any, all addresses")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
alltests target requires having symlink created by configure target
(default target). Without that there is no test being run.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Commit 886f2c43 added generate_nlmsg.c. Running alltests
target, which uses the binary required to run 'make -C tools' before.
Fixes: 886f2c43 testsuite: Generate nlmsg blob at runtime
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Commit ad23e152 caused generate_nlmsg to be always missing:
$ make alltests
make: ./tools/generate_nlmsg: Command not found
Create testclean: to remove only results directory.
Fixes: ad23e152 testsuite: remove all temp files and implement make clean
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
IPVLAN and IPVTAP are using the same functions and parameters. So we can
just add a new link_util with id ipvtap. Others are the same.
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
