The trap policer set command allows the user to set the parameters of
the packet trap policer, such as rate and burst size. Example:
# devlink trap policer set netdevsim/netdevsim10 policer 1 rate 1000 burst 32
The trap policer show command allows the user to get the current
parameters of an individual policer or a dump of all policers in case
one is not specified. When '-s' is specified the policer's statistics
are shown. Example:
# devlink -jps trap policer show netdevsim/netdevsim10 policer 1
{
"trap_policer": {
"netdevsim/netdevsim10": [ {
"policer": 1,
"rate": 1000,
"burst": 32,
"stats": {
"rx": {
"dropped": 53
}
}
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently PCI PF and VF devlink devices register their ports as
physical port in non-representors mode.
Introduce a new port flavour as virtual so that virtual devices can
register 'virtual' flavour to make it more clear to users.
An example of one PCI PF and 2 PCI virtual functions, each having
one devlink port.
$ devlink port show
pci/0000:06:00.0/1: type eth netdev ens2f0 flavour physical port 0
pci/0000:06:00.2/1: type eth netdev ens2f2 flavour virtual port 0
pci/0000:06:00.3/1: type eth netdev ens2f3 flavour virtual port 0
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Flow action cookie has been recently added to kernel, print it out.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for devlink health error recovery status monitoring.
Update devlink-monitor man page accordingly.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Warning seen on Ubuntu
devlink.c: In function ‘cmd_dev_flash’:
devlink.c:3071:3: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
3071 | write(pipe_w, &err, sizeof(err));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 9b13cddfe2 ("devlink: implement flash status monitoring")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Replace calls for pr_out_bool() and pr_out_uint() with direct calls
to common json_print library function print_bool() and print_uint().
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Replace calls for pr_bool/uint/uint64_value with direct calls for the
matching common json_print library function: print_bool(), print_uint()
and print_u64()
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Replace calls for pr_out_str() and pr_out_str_value() with direct calls to
common json_print library functions.
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Substitute json prints to use json_print.c common library functions,
instead of directly calling jsonw_functions.
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Introduce a new attribute representing a new time-stamp format: current
time in ns (to comply with y2038) instead of jiffies. If the new
attribute was received, translate the time-stamp accordingly (ns).
Fixes: 2f1242efe9 ("devlink: Add devlink health show command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add pr_out_dump_reporter prefix to the helper function's name and
encapsulate the print in it.
Fixes: 2f1242efe9 ("devlink: Add devlink health show command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
devlink sb occupancy show requires device or port handle.
It passes both device and port handle bits as required to
dl_argv_parse() so since commit 1896b100af ("devlink: catch
missing strings in dl_args_required") devlink will now
complain that only one is present:
$ devlink sb occupancy show pci/0000:06:00.0/0
BUG: unknown argument required but not found
Drop the bit for the handle which was not found from required.
Reported-by: Shalom Toledo <shalomt@mellanox.com>
Fixes: 1896b100af ("devlink: catch missing strings in dl_args_required")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Tested-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Resource size is a 64 bit attribute at netlink level.
Make the command line argument 64 bit as well.
Fixes: 8cd6440958 ("devlink: Add support for devlink resource abstraction")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently if dl_args_required doesn't contain a string
for a given option the fact that the option is missing
is silently ignored.
Add a catch-all case and print a generic error.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
netns parameter for devlink reload is supposed to take PID
as well as string name. However, the PID parsing has two
bugs:
- the opts->netns member is unsigned so the < 0
condition is always false;
- the parameter list is not rewinded after parsing as
a name, so parsing as a pid uses the wrong argument.
Fixes: 08e8e1ca3e ("devlink: extend reload command to add support for network namespace change")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
If devlink resource set parameters are not provided it crashes:
$ devlink resource set netdevsim/netdevsim0
Segmentation fault (core dumped)
This is because even though DL_OPT_RESOURCE_PATH and
DL_OPT_RESOURCE_SIZE are passed as o_required, the validation
table doesn't contain a relevant string.
Fixes: 8cd6440958 ("devlink: Add support for devlink resource abstraction")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In devlink health show command the reporter's name parameter is called
reporter, but in the output the reporter's name is referred to as name
Before this patch:
$ devlink health show pci/0000:04:00.0 reporter tx
pci/0000:04:00.0:
name tx
state healthy error 0 recover 0 grace_period 500 auto_recover true
After this patch:
$ devlink health show pci/0000:04:00.0 reporter tx
pci/0000:04:00.0:
reporter tx
state healthy error 0 recover 0 grace_period 500 auto_recover true
Reported-by: Jiri Pirko <jiri@mellanox.com>
Fixes: 2f1242efe9 ("devlink: Add devlink health show command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Introduce a helper function which wraps code that adds a left hand side
space separator unless it follows a newline.
Fixes: e3d0f0c0e3 ("devlink: add option to generate JSON output")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Extend existing devlink reload command by adding option "netns" by which
user can instruct kernel to reload the devlink instance into specified
network namespace.
Example:
$ ip netns add testns1
$ devlink dev reload netdevsim/netdevsim10 netns testns1
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Similar to ip tool, add an option to devlink to operate under certain
network namespace. Unfortunately, "-n" is already taken, so use "-N"
instead.
Example:
$ devlink -N testns1 dev show
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Conflicts:
devlink/devlink.c
Fixed the conflict by updating the numbering for all new attributes
after the ones in master branch.
Signed-off-by: David Ahern <dsahern@gmail.com>
Listen to status notifications coming from kernel during flashing and
put them on stdout to inform user about the status.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Kernel sends notifications about flash update status, so implement these
messages for monitoring.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The 'fw_load_policy' devlink parameter now supports an unknown value.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new devlink parameter along with string to uint
conversion.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
devlink segfaults when using grace_period without reporter
$ devlink health set pci/0000:00:09.0 grace_period 3500
Segmentation fault
devlink is instead supposed to gracefully fail printing a warning
message
$ devlink health set pci/0000:00:09.0 grace_period 3500
Reporter's name is expected.
This happens because DL_OPT_HEALTH_REPORTER_NAME and
DL_OPT_HEALTH_REPORTER_GRACEFUL_PERIOD are both defined as BIT(27).
When dl_opts_put() parse options and grace_period is set, it erroneously
tries to set reporter name to null.
This is fixed simply shifting by 1 bit enumeration starting with
DL_OPT_HEALTH_REPORTER_GRACEFUL_PERIOD.
Fixes: b18d89195b ("devlink: Add devlink health set command")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
These commands are similar to the trap set and show commands, but
operate on a trap group and not individual traps. Example:
# devlink trap group set netdevsim/netdevsim10 group l3_drops action trap
# devlink -jps trap group show netdevsim/netdevsim10 group l3_drops
{
"trap_group": {
"netdevsim/netdevsim10": [ {
"name": "l3_drops",
"generic": true,
"stats": {
"rx": {
"bytes": 0,
"packets": 0
}
}
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The trap set command allows the user to set the action of an individual
trap. Example:
# devlink trap set netdevsim/netdevsim10 trap blackhole_route action trap
The trap show command allows the user to get the current status of an
individual trap or a dump of all traps in case one is not specified.
When '-s' is specified the trap's statistics are shown. When '-v' is
specified the metadata types the trap can provide are shown. Example:
# devlink -jvps trap show netdevsim/netdevsim10 trap blackhole_route
{
"trap": {
"netdevsim/netdevsim10": [ {
"name": "blackhole_route",
"type": "drop",
"generic": true,
"action": "trap",
"group": "l3_drops",
"metadata": [ "input_port" ],
"stats": {
"rx": {
"bytes": 0,
"packets": 0
}
}
} ]
}
}
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently, the number of supported options is capped at 32 which is a
problem given we are about to add a few more and go over the limit.
Increase the limit to 64 options.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Loose the "q" from the names and name the structure fields in the same
way rest of the code does. Also, fix list_add arg order which leads
to segfault.
Fixes: 33267017fa ("iproute2: devlink: port from sys/queue.h to list.h")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
sys/queue.h does not exist on linux-musl targets and fails build as:
devlink.c:28:10: fatal error: sys/queue.h: No such file or directory
28 | #include <sys/queue.h>
| ^~~~~~~~~~~~~
The change ports to list.h API and drops dependency of 'sys/queue.h'.
The API maps one-to-one.
Build-tested on linux-musl and linux-glibc.
Bug: https://bugs.gentoo.org/690486
CC: Stephen Hemminger <stephen@networkplumber.org>
CC: netdev@vger.kernel.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Keep pr_out_binary_value function only for printing. Inner relations
like array grouping should be done outside the function.
Fixes: 844a61764c ("devlink: Add helper functions for name and value separately")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Although devlink health dump show command is given per reporter, it
returns large amounts of data. Trying to use the doit cb results in
OUT-OF-BUFFER error. This complementary patch raises the DUMP flag in
order to invoke the dumpit cb. We're safe as no existing drivers
implement the dump health reporter option yet.
Fixes: 041e6e651a ("devlink: Add devlink health dump show command")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Introduce PCI PF and VF port flavour and port attributes such as PF
number and VF number.
$ devlink port show
pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0
pci/0000:05:00.0/1: type eth netdev eth1 flavour pcivf pfnum 0 vfnum 0
pci/0000:05:00.0/2: type eth netdev eth2 flavour pcivf pfnum 0 vfnum 1
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Show devlink port number whenever kernel reports that attribute.
An example output for a physical port.
$ devlink port show
pci/0000:06:00.1/65535: type eth netdev eth1_p1 flavour physical port 1
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since commit 2f1242efe9 ("devlink: Add devlink health show command") we
use the sys/sysinfo.h header for the sysinfo(2) system call. But since
iproute2 carries a local version of the kernel struct sysinfo, this
causes a collision with libc that do not rely on kernel defined sysinfo
like musl libc:
In file included from devlink.c:25:0:
.../sysroot/usr/include/sys/sysinfo.h:10:8: error: redefinition of 'struct sysinfo'
struct sysinfo {
^~~~~~~
In file included from ../include/uapi/linux/kernel.h:5:0,
from ../include/uapi/linux/netlink.h:5,
from ../include/uapi/linux/genetlink.h:6,
from devlink.c:21:
../include/uapi/linux/sysinfo.h:8:8: note: originally defined here
struct sysinfo {
^~~~~~~
Move the sys/sysinfo.h userspace header before kernel headers, and
suppress the indirect include of linux/sysinfo.h.
Cc: Aya Levin <ayal@mellanox.com>
Cc: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
32bit targets define uint64_t as long long unsigned. This leads to the
following build warning:
devlink.c: In function ‘pr_out_u64’:
devlink.c:1729:11: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘uint64_t {aka long long unsigned int}’ [-Wformat=]
pr_out("%s %lu", name, val);
^
devlink.c:59:21: note: in definition of macro ‘pr_out’
fprintf(stdout, ##args); \
^~~~
Use uint64_t specific conversion specifiers in the format string to fix
that.
Cc: Aya Levin <ayal@mellanox.com>
Cc: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Device name on mdev bus is 36 characters long which follow standard uuid
RFC 4122.
This is probably the longest name that a kernel will return for a
device.
Hence increase the buffer size to 64 bytes.
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The command is supposed to allow users to filter events related to
certain objects, but returns an error when an object is specified:
# devlink mon dev
Command "dev" not found
Fix this by allowing the command to process the specified objects.
Example:
# devlink/devlink mon dev &
# echo "10 1" > /sys/bus/netdevsim/new_device
[dev,new] netdevsim/netdevsim10
# devlink/devlink mon port &
# echo "11 1" > /sys/bus/netdevsim/new_device
[port,new] netdevsim/netdevsim11/0: type notset flavour physical
[port,new] netdevsim/netdevsim11/0: type eth netdev eth1 flavour physical
# devlink/devlink mon &
# echo "12 1" > /sys/bus/netdevsim/new_device
[dev,new] netdevsim/netdevsim12
[port,new] netdevsim/netdevsim12/0: type notset flavour physical
[port,new] netdevsim/netdevsim12/0: type eth netdev eth2 flavour physical
Fixes: a3c4b484a1 ("add devlink tool")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add devlink set command which enables the user to configure parameters
related to the devlink health mechanism per reporter.
1) grace_period [msec] time interval between auto recoveries.
2) auto_recover [true/false] whether the devlink should execute automatic
recover on error.
Add a helper function to retrieve a boolean value as an input parameter.
Example:
$ devlink health set pci/0000:00:09.0 reporter tx grace_period 3500
$ devlink health set pci/0000:00:09.0 reporter tx auto_recover false
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add devlink dump clear command which deletes the last saved dump file.
Clearing the last saved dump enables a new dump file to be saved.
Example:
$ devlink health dump clear pci/0000:00:09.0 reporter tx
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add devlink dump show command which displays the last saved dump.
Devlink health saves a single dump. If a dump is not already stored
by the devlink for this reporter, devlink generates a new dump. The dump
can be generated automatically when a reporter reports on an
error or manually by user's request.
The dump's output is defined by the reporter. The command uses the
infra structure for flexible format output introduced in previous patch.
Example:
$ devlink health dump show pci/0000:00:09.0 reporter tx
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add devlink health diagnose command: enabling retrieval of diagnostics data
by the user on a reporter on a device. The command's output is a
free text defined by the reporter.
This patch also introduces an infra structure for flexible format
output. This allow the command to display different data fields
according to the reporter.
Example:
$ devlink health diagnose pci/0000:00:0a.0 reporter tx
SQs:
sqn: 4403 HW state: 1 stopped: false
sqn: 4408 HW state: 1 stopped: false
sqn: 4413 HW state: 1 stopped: false
sqn: 4418 HW state: 1 stopped: false
sqn: 4423 HW state: 1 stopped: false
$ devlink health diagnose pci/0000:00:0a.0 reporter tx -jp
{
"SQs":[
{
"sqn":4403,
"HW state":1,
"stopped":false
},
{
"sqn":4408,
"HW state":1,
"stopped":false
},
{
"sqn":4413,
"HW state":1,
"stopped":false
},
{
"sqn":4418,
"HW state":1,
"stopped":false
},
{
"sqn":4423,
"HW state":1,
"stopped":false
}
]
}
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add devlink health recover command which enables the user to initiate a
recovery on a reporter (if a recovery cb was supplied by the reporter).
This operation will increment the recoveries counter displayed in the
show command.
Example:
$ devlink health recover pci/0000:00:09.0 reporter tx
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add devlink health show command which displays status and configuration
info on a specific reporter on a device or dump the info on all
reporters on all devices. Add helper functions to display status and
dump's time stamp.
Example:
$ devlink health show pci/0000:00:09.0 reporter tx
pci/0000:00:09.0:
name tx
state healthy error 0 recover 1 last_dump_date 2019-02-14 last_dump_time 10:10:10 grace_period 600 auto_recover true
$ devlink health show pci/0000:00:09.0 reporter tx -jp
{
"health":{
"pci/0000:00:0a.0":[
{
"name":"tx",
"state":"healthy",
"error":0,
"recover":1,
"last_dump_date":"2019-Feb-14",
"last_dump_time":"10:10:10",
"grace_period":600,
"auto_recover":true
}
]
}
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a new helper functions which outputs only values (without name
label) for different types: boolean, uint, uint64, string and binary.
In addition add a helper function which prints only the name label.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch removes the inverted commas from boolean values in JSON
format: true/false instead of "true"/"false".
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch prints uint64_t with its corresponding format and avoid implicit
cast to uint32_t.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Introducing argument's metadata structure matching a bitmap flag per
required argument and an error message if missing. Using this static
array to refactor validation of finding required arguments in devlink
command line and to ease further maintenance.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add new command for updating flash of devices via devlink API.
Example:
$ cp flash-boot.bin /lib/firmware/
$ devlink dev flash pci/0000:05:00.0 file flash-boot.bin
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Dpipe table show command has a depencency on getting resources.
If resource get command is not supported by the driver, dpipe table
show fails. However, resource is only additional information
in dpipe table show output. So relax the dependency and let
the dpipe tables be shown even if resources get command fails.
Fixes: ead180274c ("devlink: Add support for resource/dpipe relation")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow setting u{8,16,32} generic parameters as a well defined strings in
devlink user space tool.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
resource_path_parse() returns either zero or a negative error code,
hence the negated value must be passed to strerror().
Fixes: 8cd6440958 ("devlink: Add support for devlink resource abstraction")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Typically the part of the flag in brackets completes the leading part
instead of repeating it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Devlink region allows access to driver defined address regions.
Each device can create its supported address regions and register
them. A device which exposes a region will allow access to it
using devlink.
This support allows reading and dumping regions snapshots as well
as presenting information such as region size and current available
snapshots.
A snapshot represents a memory image of a region taken by the driver.
If a device collects a snapshot of an address region it can be later
exposed using devlink region read or dump commands.
This functionality allows for future analyses on the snapshots.
The dump command is designed to read the full address space of a
region or of a snapshot unlike the read command which allows
reading only a specific section in a region/snapshot indicated by
an address and a length, current support is for reading and dumping
for a previously taken snapshot ID.
New commands added:
devlink region show [ DEV/REGION ]
devlink region delete DEV/REGION snapshot SNAPSHOT_ID
devlink region dump DEV/REGION [ snapshot SNAPSHOT_ID ]
devlink region read DEV/REGION [ snapshot SNAPSHOT_ID ]
address ADDRESS length length
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for configuration parameters set and show.
Each parameter can be either generic or driver-specific.
The user can retrieve data on these configuration parameters by devlink
param show command and can set new value to a configuration parameter
by devlink param set command.
The configuration parameters can be set in different configuration
modes:
runtime - set while driver is running, no reset required.
driverinit - applied while driver initializes, requires restart
driver by devlink reload command.
permanent - written to device's non-volatile memory, hard reset
required to apply.
New commands added:
devlink dev param show [DEV name PARAMETER]
devlink dev param set DEV name PARAMETER value VALUE
cmode { permanent | driverinit | runtime }
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
(u64)-1 essentially means the size is unlimited. Print as 'unlimited'
as opposed to the current unsigned int range of 4294967295.
Signed-off-by: David Ahern <dsahern@gmail.com>
Dpipe - Each dpipe table can have one resource which is mapped to it.
The resource is presented via its full path. Furthermore, the number
of units consumed by single table entry is presented.
Resource - Each resource presents the dpipe tables that use it.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for hot reload. It should be used in order for resource
updates to take place.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for devlink resource abstraction. The resources are
represented by a tree based structure and are identified by a name and
a size. Some resources can present their real time occupancy.
First the resources exposed by the driver can be observed, for example:
$devlink resource show pci/0000:03:00.0
pci/0000:03:00.0:
name kvd size 245760 unit entry
resources:
name linear size 98304 occ 0 unit entry size_min 0 size_max 147456 size_gran 128
name hash_double size 60416 unit entry size_min 32768 size_max 180224 size_gran 128
name hash_single size 87040 unit entry size_min 65536 size_max 212992 size_gran 128
Some resource's size can be changed. Examples:
$devlink resource set pci/0000:03:00.0 path /kvd/hash_single size 73088
$devlink resource set pci/0000:03:00.0 path /kvd/hash_double size 74368
The changes do not apply immediately, this can be validate by the 'size_new'
attribute, which represents the pending changed size. For example
$devlink resource show pci/0000:03:00.0
pci/0000:03:00.0:
name kvd size 245760 unit entry size_valid false
resources:
name linear size 98304 size_new 147456 occ 0 unit entry size_min 0 size_max 147456 size_gran 128
name hash_double size 60416 unit entry size_min 32768 size_max 180224 size_gran 128
name hash_single size 87040 unit entry size_min 65536 size_max 212992 size_gran 128
In case of a pending change the nested resources present an indication
for a valid configuration of its children (sum of its children sizes
doesn't exceed the parent's size).
In order for the changes to take place hot reload is needed. The hot
reload through devlink will be introduced in the following patch.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently multi-line objects are separated by new-lines. This patch
changes this behavior by using indentations for separation.
Signed-off-by: Arkadi Sharhsevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In case of extending the UAPI old packages would break.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for protocol IPv4/IPv6/Ethernet special formats.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
In case of global header (protocol header), the header:field ids are used
to perform lookup for special format printer. In case no printer existence
fallback to plain value printing.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
This patch decouples the match/action parsing from printing. This is
done as a preparation for adding the ability to print global header
values, for example print IPv4 address, which require special formatting.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
This function shouldn't fail because all callers of
__dl_argv_handle_port() make sure the passed string contains enough
slashes already, but better make sure if this changes in future the
function won't access uninitialized data.
Signed-off-by: Phil Sutter <phil@nwl.cc>
dl_argv_handle_both() will either assign to handle_bit or error out in
which case the variable is not used by the caller.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Jiri Pirko <jiri@mellanox.com>
BIT() macro was implemented and used by devlink for now, but following
patches of rdmatool will reuse the same macro, so put it in common
header file.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This is an e-switch global knob to enable HW support for applying
encapsulation/decapsulation to VF traffic as part of SRIOV e-switch offloading.
The actual encap/decap is carried out (along with the matching and other
actions) per offloaded e-switch rules, e.g as done when offloading the TC tunnel
key action.
Possible values are enable/disable.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Add support for pipeline debug (dpipe). The headers are used both the
gain visibillity into the headers supported by the hardware, and to
build the headers/field database which is used by other commands.
Examples:
First we can see the headers supported by the hardware:
$devlink dpipe header show pci/0000:03:00.0
pci/0000:03:00.0:
name mlxsw_meta
field:
name erif_port bitwidth 32 mapping_type ifindex
name l3_forward bitwidth 1
name l3_drop bitwidth 1
Note that mapping_type is presented only if relevant. Also the header/
field id's are reported by the kernel they are not shown by default.
They can be observed by using the -v option. Also the headers scope
(global/local) is specified.
$devlink -v dpipe header show pci/0000:03:00.0
pci/0000:03:00.0:
name mlxsw_meta id 0 global false
field:
name erif_port id 0 bitwidth 32 mapping_type ifindex
name l3_forward id 1 bitwidth 1
name l3_drop id 2 bitwidth 1
Second we can examine the tables supported by the hardware. In order
to dump all the tables no table name should be provided:
$devlink dpipe table show pci/0000:03:00.0
In order to examine specific table its name have to be specified:
$devlink dpipe table show pci/0000:03:00.0 name erif
pci/0000:03:00.0:
name mlxsw_erif size 800 counters_enabled true
match:
type field_exact header mlxsw_meta field erif_port mapping ifindex
action:
type field_modify header mlxsw_meta field l3_forward
type field_modify header mlxsw_meta field l3_drop
To enable/disable counters on the table:
$devlink dpipe table set pci/0000:03:00.0 name erif counters enable
$devlink dpipe table set pci/0000:03:00.0 name erif counters disable
In order to see the current entries in the hardware for specific table:
$devlink dpipe table dump pci/0000:03:00.0 name erif
pci/0000:03:00.0:
index 0 counter 0
match_value:
type field_exact header mlxsw_meta field erif_port mapping ifindex mapping_value 383 value 0
action_value:
type field_modify header mlxsw_meta field l3_forward value 1
index 1 counter 0
match_value:
type field_exact header mlxsw_meta field erif_port mapping ifindex mapping_value 381 value 1
action_value:
type field_modify header mlxsw_meta field l3_forward value 1
In the above example the table contains two entries which does match
on erif port and forwards the packet or drop it (currently only the
forward count is implemented). The counter values are provided for
example. In case the counting is not enabled on the table the counters
will not be available.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Currently the netlink attribute resolving is done by a sequence of
if's. Change the attribute resolving to table lookup.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Prior to parsing command options, the devlink tool allocates memory
to store results. In case of early exit (wrong parameters or version
check), this memory wasn't freed.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
This is needed for some HWs to do proper macthing and steering.
Possible values are none, link, network, transport.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Add missing usage help for devlink dev eswitch subcommand.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
This is needed for some HWs to do proper macthing and steering.
Possible values are none, link, network, transport.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Add missing usage help for devlink dev eswitch subcommand.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Discovered by Phil's covscan. The final return statement is never reached.
This is not inherently clear from looking at the code, so change the
conditional to a switch() statement which should clarify this.
CC: Phil Sutter <phil@nwl.cc>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Phil Sutter <phil@nwl.cc>
