The route-distinguisher string can be expressed in different
ways when the AS number is part of the RD. And the configured
string value has to be kept intact.
The following vty commands store the string value internally:
- router bgp / address-family ipv4 unicast / rd vpn export <>
- router bgp / address-family l2vpn evpn / rd <>
- router bgp / address-family l2vpn evpn / vni <> / rd <>
The vty commands where RD is configured in the below places is
not considered:
- router bgp / rfapi related commands
- router bgp / address-family xxx xxx / network .. rd <>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
RD may be built based on an AS number. Like for the AS, the RD
may use the AS notation. The two below examples can illustrate:
RD 1.1:20 stands for an AS4B:NN RD with AS4B=65536 in dot format.
RD 0.1:20 stands for an AS2B:NNNN RD with AS2B=0.1 in dot+ format.
This commit adds the asnotation mode to prefix_rd2str() API so as
to pick up the relevant display.
Two new printfrr extensions are available to display the RD with
the two above display methods.
- The pRDD extension stands for dot asnotation format
- The pRDE extension stands for dot+ asnotation format.
- The pRD extension has been renamed to pRDP extension
The code is changed each time '%pRD' printf extension is called.
Possibly, the asnotation may change the output, then a macro defines
the asnotation mode to use. A side effect of forging the mode to
use is that the string could not be concatenated with other strings
in vty_out and snprintfrr. Those functions have been called multiple
times. When zlog_debug needs to display the RD with some other string,
the prefix_rd2str() old API is used instead of the printf extension.
Some code has been kept untouched:
- code related to running-config. Actually, wherever an RD is displayed,
its configured name should be dumped.
- bgp rfapi code
- bgp evpn multihoming code (partially done), since the logic is
missing to get the asnotation of 'struct bgp_evpn_es'.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The as-notation mode of the BGP instance will impact the way
the neighbor AS information is dumped in the show commands.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The confederation peers as and the confederation identifier as
are stored as a string to preserve the output in the running
configuration.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This identifier is used to display the peer configuration in
the running-config, like it has been configured.
The following commands are using a specific string attribute:
- neighbor .. remote-as ASN
- neighbor .. local-as ASN
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
A json AS number API is created in order to output a
given AS number. In order to keep backward compatibility,
if the as-notation uses a number, then the json is encoded
as an integer, otherwise the encoding will be a string.
For what is not relevant to running-configuration, the
as-notation mode is the one used for the BGP instance.
Also, the vty completion gets the configured 'as_pretty'
string value, when an user wants to get the available
BGP instances.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Each BGP prefix may have an as-path list attached. A forged
string is stored in the BGP attribute and shows the as-path
list output.
Before this commit, the as-path list output was expressed as
a list of AS values in plain format. Now, if a given BGP instance
uses a specific asnotation, then the output is changed:
new output:
router bgp 1.1 asnotation dot
!
address-family ipv4 unicast
network 10.200.0.0/24 route-map rmap
network 10.201.0.0/24 route-map rmap
redistribute connected route-map rmap
exit-address-family
exit
!
route-map rmap permit 1
set as-path prepend 1.1 5433.55 264564564
exit
ubuntu2004# do show bgp ipv4
BGP table version is 2, local router ID is 10.0.2.15, vrf id 0
Default local pref 100, local AS 1.1
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 4.4.4.4/32 0.0.0.0 0 32768 1.1 5433.55 4036.61268 ?
*> 10.0.2.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 ?
10.200.0.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 i
10.201.0.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 i
The changes include:
- the aspath structure has a new field: asnotation type
The ashash list will differentiate 2 aspaths using a different
asnotation.
- 3 new printf extensions display the as number in the wished
format: pASP, pASD, pASE for plain, dot, or dot+ format (extended).
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
A new keyword permits changing the BGP as-notation output:
- [no] router bgp <> [vrf BLABLA] [as-notation [<dot|plain|dot+>]]
At the BGP instance creation, the output will inherit the way the
BGP instance is declared. For instance, the 'router bgp 1.1'
command will configure the output in the dot format. However, if
the client wants to choose an alternate output, he will have to
add the extra command: 'router bgp 1.1 as-notation dot+'.
Also, if the user wants to have plain format, even if the BGP
instance is declared in dot format, the keyword can also be used
for that.
The as-notation output is only taken into account at the BGP
instance creation. In the case where VPN instances are used,
a separate instance may be dynamically created. In that case,
the real as-notation format will be taken into acccount at the
first configuration.
Linking the as-notation format with the BGP instance makes sense,
as the operators want to keep consistency of what they configure.
One technical reason why to link the as-notation output with the
BGP instance creation is that the as-path segment lists stored
in the BGP updates use a string representation to handle aspath
operations (by using regexp for instance). Changing on the fly
the output needs to regenerate this string representation to the
correct format. Linking the configuration to the BGP instance
creation avoids refreshing the BGP updates. A similar mechanism
is put in place in junos too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
AS number can be defined as an unsigned long number, or
two uint16 values separated by a period (.). The possible
valus are:
- usual 32 bit values : [1;2^32 -1]
- <1.65535>.<0.65535> for dot notation
- <0.65535>.<0.65535> for dot+ notation.
The 0.0 value is forbidden when configuring BGP instances
or peer configurations.
A new ASN type is added for parsing in the vty.
The following commands use that new identifier:
- router bgp ..
- bgp confederation ..
- neighbor <> remote-as <>
- neighbor <> local-as <>
- clear ip bgp <>
- route-map / set as-path <>
An asn library is available in lib/ and provides some
services:
- convert an as string into an as number.
- parse an as path list string and extract a number.
- convert an as number into a string.
Also, the bgp tests forge an as_zero_path, and to do that,
an API to relax the possibility to have a 0 as value is
specifically called from the tests.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This is a preliminary work to handle various ways to configure
a BGP Autonomous System. When creating a BGP instance, the
user may want to define the AS number as a dotted value,
instead of using an integer value.
To handle both cases, an as_pretty char attribute will store
the as number as it has been given to the vtysh command:
router bgp <as number>
Whenever the as integer of the BGP instance was dumped,
the as_pretty original format is used.
The json output reuses the integer value to keep backward
compatibility with old displays.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When we receive a default route from a peer and we originate default route
using `neighbor default-originate`, we do not track of struct attr we use,
and when we do `no neighbor default-originate` we withdraw our generated
default route, but we announce default-route from the peer.
After we do this, we unintern aspath (which was used for default-originate),
BUT it was used also for peer's default route we received.
And here we have a use-after-free crash, because bgp_process_main_one()
reaps old paths that are marked as BGP_PATH_REMOVED with aspath->refcnt > 0,
but here it's 0.
```
0 0x55c24bbcd022 in aspath_key_make bgpd/bgp_aspath.c:2070
1 0x55c24b8f1140 in attrhash_key_make bgpd/bgp_attr.c:777
2 0x7f52322e66c9 in hash_release lib/hash.c:220
3 0x55c24b8f6017 in bgp_attr_unintern bgpd/bgp_attr.c:1271
4 0x55c24ba0acaa in bgp_path_info_free_with_caller bgpd/bgp_route.c:283
5 0x55c24ba0a7de in bgp_path_info_unlock bgpd/bgp_route.c:309
6 0x55c24ba0af6d in bgp_path_info_reap bgpd/bgp_route.c:426
7 0x55c24ba17b9a in bgp_process_main_one bgpd/bgp_route.c:3333
8 0x55c24ba18a1d in bgp_process_wq bgpd/bgp_route.c:3425
9 0x7f52323c2cd5 in work_queue_run lib/workqueue.c:282
10 0x7f52323aab92 in thread_call lib/thread.c:2006
11 0x7f5232300dc7 in frr_run lib/libfrr.c:1198
12 0x55c24b8ea792 in main bgpd/bgp_main.c:520
13 0x7f5231c3a082 in __libc_start_main ../csu/libc-start.c:308
14 0x55c24b8ef0bd in _start (/usr/lib/frr/bgpd+0x2c90bd)
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
This introduces the option for a user to lookup one specific prefix in
the advertised-routes or received-routes table of a peer.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Filter out keys in JSON output with "grep -v" does not work when JSON
does not use the pretty format.
Use native python code to filter out keys.
Fixes: 6c13bd5744 ("topotests: fix bgp_vpnv4_noretain")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Note: It's necessary that you specify the fetch-depth argument to
actions/checkout@v2 step. By default they fetch only latest commit of the
branch, but we need more commits since we validate a range of commit messages.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
