The previous commits introduced a new operation,
`ZEBRA_SRV6_MANAGER_GET_LOCATOR`, allowing a daemon to request
information about a specific SRv6 locator from the SRv6 SID Manager.
This commit extends the SID Manager to respond to a
`ZEBRA_SRV6_MANAGER_GET_LOCATOR` request and provide the requested
locator information.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Add two new ZAPI operations: `ZEBRA_SRV6_MANAGER_GET_SRV6_SID` and
`ZEBRA_SRV6_MANAGER_RELEASE_SRV6_SID`. These APIs allow a daemon to get and
release an SRv6 SID, respectively.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Add a new ZAPI operation, ZEBRA_SRV6_MANAGER_GET_LOCATOR, which allows a
daemon to request information about a specific locator from the SRv6 SID
Manager.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Add a data structure to represent an SRv6 SID context and the related
management functions (allocate/free).
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Add a data structure to represent an SRv6 SID context and the related
management functions (allocate/free).
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Add the CLI to choose the SID format of a locator. When the SID format
of a locator is changed, the SIDs allocated from that locator might no
longer be valid (for example, because the new format might involve a
different SID allocation schema). In such a case, it is necessary to
notify all the zclients so that they can withdraw/uninstall the old SIDs
that use the previous format and allocate/install/advertise the new SIDs
based on the new format.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
An SRv6 block is an IPv6 prefix from which SIDs are allocated. This
commit adds support for SRv6 SID blocks. Specifically, it adds a data
structure to store information about an SRv6 block (e.g., its occupancy
status, which SIDs have been allocated and which are available, which
SID format is used for that block, etc.). It also adds some functions to
manage the block (allocate / free / lookup).
These functions will be used in the next commits to support the
allocation of SIDs from a block in the SID Manager.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Add functionalities to manage SRv6 SID formats (register / unregister /
lookup) and create two SID formats upon SRv6 Manager initialization:
`uncompressed-f4024` and `usid-f3216`.
In future commits, we will add the CLI to allow the user to choose
between the two formats.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
If we receive a malformed packets, this could lead ptr_get_be64() reading
the packets more than needed (heap overflow).
```
Using host libthread_db library "/lib/aarch64-linux-gnu/libthread_db.so.1".
0 0xaaaaaadf86ec in __asan_memcpy (/home/ubuntu/frr-public/frr_public_private-libfuzzer/bgpd/.libs/bgpd+0x3586ec) (BuildId: 78123cd26ada92b8b59fc0d74d292ba70c9d2e01)
1 0xaaaaaaeb60fc in ptr_get_be64 /home/ubuntu/frr-public/frr_public_private-libfuzzer/./lib/stream.h:377:2
2 0xaaaaaaeb5b90 in ecommunity_linkbw_present /home/ubuntu/frr-public/frr_public_private-libfuzzer/bgpd/bgp_ecommunity.c:1895:10
3 0xaaaaaae50f30 in bgp_attr_ext_communities /home/ubuntu/frr-public/frr_public_private-libfuzzer/bgpd/bgp_attr.c:2639:8
4 0xaaaaaae49d58 in bgp_attr_parse /home/ubuntu/frr-public/frr_public_private-libfuzzer/bgpd/bgp_attr.c:3776:10
5 0xaaaaab063260 in bgp_update_receive /home/ubuntu/frr-public/frr_public_private-libfuzzer/bgpd/bgp_packet.c:2371:20
6 0xaaaaab05df00 in bgp_process_packet /home/ubuntu/frr-public/frr_public_private-libfuzzer/bgpd/bgp_packet.c:4063:11
7 0xaaaaaae36110 in LLVMFuzzerTestOneInput /home/ubuntu/frr-public/frr_public_private-libfuzzer/bgpd/bgp_main.c:582:3
```
This is triggered when receiving such a packet (malformed):
```
(gdb) bt
0 ecommunity_linkbw_present (ecom=0x555556287990, bw=bw@entry=0x7fffffffda68)
at bgpd/bgp_ecommunity.c:1802
1 0x000055555564fcac in bgp_attr_ext_communities (args=0x7fffffffd840) at bgpd/bgp_attr.c:2619
2 bgp_attr_parse (peer=peer@entry=0x55555628cdf0, attr=attr@entry=0x7fffffffd960, size=size@entry=20,
mp_update=mp_update@entry=0x7fffffffd940, mp_withdraw=mp_withdraw@entry=0x7fffffffd950)
at bgpd/bgp_attr.c:3755
3 0x00005555556aa655 in bgp_update_receive (connection=connection@entry=0x5555562aa030,
peer=peer@entry=0x55555628cdf0, size=size@entry=41) at bgpd/bgp_packet.c:2324
4 0x00005555556afab7 in bgp_process_packet (thread=<optimized out>) at bgpd/bgp_packet.c:3897
5 0x00007ffff7ac2f73 in event_call (thread=thread@entry=0x7fffffffdc70) at lib/event.c:2011
6 0x00007ffff7a6fb90 in frr_run (master=0x555555bc7c90) at lib/libfrr.c:1212
7 0x00005555556457e1 in main (argc=<optimized out>, argv=<optimized out>) at bgpd/bgp_main.c:543
(gdb) p *ecom
$1 = {refcnt = 1, unit_size = 8 '\b', disable_ieee_floating = false, size = 2, val = 0x555556282150 "",
str = 0x5555562a9c30 "UNK:0, 255 UNK:2, 6"}
```
Reported-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The isis_tilfa_topo1 topotest is comprehensive and contains a large
amount of reference data. One problem is that, when changes occur,
updating this reference data can be difficult.
To address this problem, this commit introduces a method to
automatically regenerate the reference data by setting the `REGEN_DATA`
environment variable.
Usage:
$ REGEN_DATA=true python3 ./test_isis_tilfa_topo1.py
When `REGEN_DATA` is set, the topotest regenerates reference data
from the current run instead of comparing against existing reference
data. Note that regenerated data must be manually verified for
correctness.
This commit also simplifies the reference data by replacing all diff
files with complete JSON snapshots.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In this topotest, steps 10-15 were added to test the IS-IS switchover
functionality. In short, two cases were tested: switchover after a
link down event and switchover after a BFD down event. Both cases
were tested in sequence on the same router, rt6. This involved the
following steps:
- Setting the SPF delay timer to 15 seconds
- Shutting down the eth-rt5 interface from the switch side
- Testing the post-switchover RIB and LIB (triggered by the link down
event)
- Testing the post-SPF RIB and LIB
- Bringing the eth-rt5 interface back up
- Configuring a BFD session between rt6 and rt5
- Shutting down the eth-rt5 interface from the switch side once again
- Testing the post-switchover RIB and LIB (triggered by the BFD down
event)
- Testing the post-SPF RIB and LIB
Since the time window to test the post-switchover RIB and LIB was too
narrow (10 seconds), these tests were having sporadic failures.
To resolve this problem, we can simplify the switchover test as follows:
- Setting the SPF delay timer to 60 seconds (not 15)
- Disabling "link-detect" on rt6's eth-rt5 interface
- Shutting down the eth-rt5 interface from the switch side
- On rt6, testing the post-switchover RIB and LIB (triggered by the
BFD down event)
- On rt5, testing the post-switchover RIB and LIB (triggered by the
link down event)
Notice how we can test both post-link-down and post-BFD-down switchover
cases simultaneously by having different "link-detect" configurations
on rt5 and rt6. Additionally, by using a larger SPF delay timer, the
time window to test the post-switchover RIB and LIB is much larger
and less prone to sporadic failures.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When switching from nexthop to zapi_nexthop, the srte color
is copied. Do the same in reverse.
Fixes: 31f937fb43 ("lib, zebra: Add SR-TE policy infrastructure to zebra")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
- Use `uname -r` to also install specific module versions since
with github runners the running kernel can become out-dated with
the deployed packages.
Signed-off-by: Christian Hopps <chopps@labn.net>
New back-end clients may need to add notification static allocations so
we should have it available for those users, rather than requiring the
new user delve into the mgmtd infra and modify it themselves.
Signed-off-by: Christian Hopps <chopps@labn.net>
Check that "show ip route vrf XXX json" and the JSON at key "XXX" of
"show ip route vrf all json" gives the same output.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When displaying a route table in JSON, a table JSON object is storing
all the prefix JSON objects containing the prefix information. This
results in excessive memory allocation for JSON objects, potentially
leading to an out-of-memory error on the machine with large routing
tables.
To Fix the memory consumption issue for the "show ip[v6] route [vrf XX]
json" command, display the prefixes one by one and free the memory of
each JSON object after it has been displayed.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
0e2fc3d67f ("vtysh, zebra: Fix malformed json output for multiple vrfs
in command 'show ip route vrf all json'") has been reverted in the
previous commit. Although the fix was correct, it was consuming too muca
memory when displaying large route tables.
A root JSON object was storing all the JSON objects containing the route
tables, each containing their respective prefixes in JSON objects. This
resulted in excessive memory allocation for JSON objects, potentially
leading to an out-of-memory error on the machine.
To Fix the memory consumption issue for the "show ip[v6] route vrf all
json" command, display the tables one by one and free the memory of each
JSON object after it has been displayed.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
This reverts commit 0e2fc3d67f.
This fix was correct but not optimal for memory consumption at scale.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
- `darr_free_free` to `darr_free` each element prior to `darr_free`
the array.
- `darr_free_func` to call `func` on each element prior to `darr_free`
the array.
Signed-off-by: Christian Hopps <chopps@labn.net>
