This commit implements necessary netlink encoders for traffic control
including QDISC, TCLASS and TFILTER, and adds basic dplane operations.
Co-authored-by: Stephen Worley <sworley@nvidia.com>
Signed-off-by: Siger Yang <siger.yang@outlook.com>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
-> Moved new capabilities needed to under HAVE_DPDK
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
Currently specific local neighbors (attached to SVIs) are maintatined
in an EVPN specific database. There is a need to maintain L3 neighbors
for other purposes including MAC resolution for PBR nexthops.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Cleanup compile and fix crash
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
Add initial zebra tracepoint support infrastructure
as well as add a frr_zebra:netlink_interface
callback.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
a) We'll need to pass the info up via some dataplane control method
(This way bsd and linux can both be zebra agnostic of each other)
b) We'll need to modify `struct interface *` to track this data
and when it changes to notify upper level protocols about it.
c) Work is needed to dump the entire mpls state at the start
so we can gather interface state. This should be done
after interface data gathering from the kernel.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
"[no] netns NAME" commands are part of the lib, but they are actually
zebra-only:
- they are using vrf_netns_handler_create and its description clearly
says that it "should be called from zebra only"
- vtysh sends these commands only to zebra
- only zebra outputs the netns related config
- zebra notifies other daemons about netns attachment
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
like the other automake variables, setting `xyz_LDFLAGS` causes
`AM_LDFLAGS` to be ignored for `xyz`. For some reason I had in my mind
that automake doesn't do this for LDFLAGS, but... it does. (Which is
consistent with `_CFLAGS` and co.)
So, all the libraries and modules have been ignoring `AM_LDFLAGS` (which
includes `SAN_FLAGS` too). Set up new `LIB_LDFLAGS` and
`MODULE_LDFLAGS` to handle all of this correctly (and move these bits to
a central location.)
Fixes: #9034
Fixes: 0c4285d77e ("build: properly split CFLAGS from AC_CFLAGS")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This commit is a part of #5853 works that add new ZAPI to
configure SRv6 locator which manages chunk prefix for
SRv6 SID IPv6 address for each routing protocol daemons.
NEW-ZAPIs:
* ZEBRA_SRV6_LOCATOR_ADD
* ZEBRA_SRV6_LOCATOR_DELETE
* ZEBRA_SRV6_MANAGER_CONNECT
* ZEBRA_SRV6_MANAGER_GET_LOCATOR_CHUNK
* ZEBRA_SRV6_MANAGER_RELEASE_LOCATOR_CHUNK
Zclient can connect to zebra's srv6-manager with
ZEBRA_SRV6_MANAGER_CONNECT api like a label-manager.
Then zclient uses ZEBRA_SRV6_MANAGER_GET_LOCATOR_CHUNK to
allocated dedicated locator chunk for it's routing protocol.
Zebra works for only prefix reservation and distribute
the ownership of the locator chunks for zcliens.
Then, zclient installs SRv6 function with
ZEBRA_ROUTE_ADD api with nh_seg6local_* fields.
This feature is already implemented by another PR(#7680).
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
This commit is a part of #5853 that add new cmd-node for SRv6 configuration.
This commit just add cmd-node and moving node cli only, acutual SRv6 config
command isn't added. (that is added later commit. of this branch)
new cli nodes:
* SRv6
* SRv6-locators
* SRv6-locator
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
`CFLAGS` is a "user variable", not intended to be controlled by
configure itself. Let's put all the "important" stuff in AC_CFLAGS and
only leave debug/optimization controls in CFLAGS.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Most of these are many, many years out of date. All of them vary
randomly in quality. They show up by default in packages where they
aren't really useful now that we use integrated config. Remove them.
The useful ones have been moved to the docs.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
This commit introduces the implementation for the north-bound
callbacks for the zebra-specific route-map match and set clauses.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Signed-off-by: Sarita Patra <saritap@vmware.com>
This one also needed a bit of shuffling around, but MTYPE_RE is the only
one left used across file boundaries now.
Signed-off-by: David Lamparter <equinox@diac24.net>
The point of the `-std=gnu99` was to override a `-std=c99` that may be
coming in from net-snmp. However, we want C11, not C99.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add new compile option to enable human readable netlink dumps with
`debug zebra kernel msgdump`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The Solaris code has gone through a deprecation cycle. No-one
has said anything to us and worse of all we don't have any test
systems running Solaris to know if we are making changes that
are breaking on Solaris. Remove it from the system so
we can clean up a bit.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
For the sake of Segment Routing (SR) and Traffic Engineering (TE)
Policies there's a need for additional infrastructure within zebra.
The infrastructure in this PR is supposed to manage such policies
in terms of installing binding SIDs and LSPs. Also it is capable of
managing MPLS labels using the label manager, keeping track of
nexthops (for resolving labels) and notifying interested parties about
changes of a policy/LSP state. Further it enables a route map mechanism
for BGP and SR-TE colors such that learned BGP routes can be mapped
onto SR-TE Policies.
This PR does not introduce any usable features by now, it is just
infrastructure for other upcoming PRs which will introduce 'pathd',
a new SR-TE daemon.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
1. Local ethernet segments are configured in zebra by attaching a
local-es-id and sys-mac to a access interface -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
!
interface hostbond1
evpn mh es-id 1
evpn mh es-sys-mac 00:00:00:00:01:11
!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
This info is then sent to BGP and used for the generation of EAD-per-ES
routes.
2. Access VLANs associated with an (ES) access port are translated into
ES-EVI objects and sent to BGP. This is used by BGP for the
generation of EAD-EVI routes.
3. Remote ESs are imported by BGP and sent to zebra. A list of VTEPs
is maintained per-remote ES in zebra. This list is used for the creation
of the L2-NHG that is used for forwarding traffic.
4. MAC entries with a non-zero ESI destination use the L2-NHG associated
with the ESI for forwarding traffic over the VxLAN overlay.
Please see zebra_evpn_mh.h for the datastruct organization details.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Need to list #include'd header files in Makefile to make sure it builds
correctly.
Fixes: #6576
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add the zebra_opaque module, designed to offload some opaque zapi
message processing to a new, dedicated pthread. Add to the build;
also re-sort the lists of zebra files in subdir.am.
Start, stop, and clean-up the opaque module, integrate with zebra
start and shutdown.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
These are easy to get subtly wrong, and doing so can cause
nondeterministic failures when racing in parallel builds.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Reported by testing agency that rfc 4861 section 6.2.1 states
that all implementations must have a configuration knob to change
the setting of the advertised hop limit. This fix adds that
capability.
Ticket: CM-29200
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Changes:
* Let the package builder scripts know that we have a new module that
needs to be taken care of.
* Include the frr atomic header to avoid undeclared atomic operations.
* Disable build on *BSDs because the code is using some zebra netlink
functions only available for Linux.
* Move data plane FPM module outside old FPM automake definition.
* Fix atomic usage for Ubuntu 14.04 (always use explicit).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Zebra will have special handling for clients with GR enabled.
When client disconnects with GR enabled, then a stale client
will be created and its RIB will be retained till stale timer
or client comes up and updated its RIB.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Soman K S <somanks@vmware.com>
Signed-off-by: Santosh P K <sapk@vmware.com>
The vrrpd one conflicts with the standalone vrrpd package; also we're
installing daemons to /usr/lib/frr on some systems so they're not on
PATH.
Signed-off-by: David Lamparter <equinox@diac24.net>
Older versions of protobuf-c do not support version 3 of the
protocol. Add a check into the system to see if we have
version 3 available and if so, compile it in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If you compile FRR with no j factor zebra_mlag.c fails to
build because the vtysh extraction methodology runs first
before the protobuf compiler runs and that compilation does
not have the proper dependancy chain built for the inclusions
that zebra_mlag.c had. Moving the DEF* code into a zebra_mlag_vty.c
which can be included in the vtysh extraction code and has
no mlag.proto dependancies makes the compilation work better.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is pretty much just to get rid of the HAVE_CUMULUS. The
hook/module API is as "wtf" as it was before...
Signed-off-by: David Lamparter <equinox@diac24.net>
1. add the Mlag ProtoBuf Lib to Zebra Compilation
2. Encode the messages with protobuf before writing to MLAG
3. Decode the MLAG Messages using protobuf and write to clients
based on their subscrption.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
This includes:
1. Processing client Registrations for MLAG
2. storing client Interests for MLAG updates
3. Opening communication channel to MLAG with First client reg
4. Closing Communication channel with last client De-reg
5. Spawning a new thread for handling MLAG updates peocessing
6. adding Test code
7. advertising MLAG Updates to clients based on their interests
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Add a private header file for functions that are internal/special
case like how we do it for `lib/nexthop_group_private.h`.
Remove a bunch of functions from the header file only being used
statically and add some comments for those remaining to indicate
better what their use is.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
