Update ospfd and ospf6d to send opaque route attributes to
zebra. Those attributes are stored in the RIB and can be viewed
using the "show ip[v6] route" commands (other than that, they are
completely ignored by zebra).
Example:
```
debian# show ip route 192.168.1.0/24
Routing entry for 192.168.1.0/24
Known via "ospf", distance 110, metric 20, best
Last update 01:57:08 ago
* 10.0.1.2, via eth-rt2, weight 1
OSPF path type : External-2
OSPF tag : 0
debian#
debian# show ip route 192.168.1.0/24 json
{
"192.168.1.0\/24":[
{
"prefix":"192.168.1.0\/24",
"prefixLen":24,
"protocol":"ospf",
"vrfId":0,
"vrfName":"default",
"selected":true,
[snip]
"ospfPathType":"External-2",
"ospfTag":"0"
}
]
}
```
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Topology:
IXIA-----(ens192)FRR(ens224)------iXIA
Configuration:
1. Create 8 sub-interfaces on ens192 under Default VRF and configure 8
EBGP session between FRR and IXIA.
2. Create 1000 sub-interfaces on ens224 under Default VRF and configure
1000 EBGP session between FRR and IXIA.
3. 2M prefixes distributed from Left side Ixia each with 8 ECMP path.
4. So in total, there are 2M prefixes * 8 ECMP = 16M prefixes entries
in RIB and FIB.
Issue:
Shut ens192 and ens224, this is taking 1hr 15 mins to clean up the routes.
Root Cause:
In the case of route deletion, if the particular route node is having
nht count = 0, we are going to the parent and doing nht evaluation,
which is not needed.
Fix:
If the deleted the route node is having nht count > 0, then do a nht
evaluation on the parent node.
Shut ens192 and ens224, it is taking 1 min to clean up the routes
with the fix.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Used for graceful-restart mostly.
Especially for bgp_show_neighbor_graceful_restart_capability_per_afi_safi()
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This function is sure to return correct value by "assert", so the
checking its return value should be removed.
Signed-off-by: anlan_cs <anlan_cs@tom.com>
Currently, it is possible to rename the default VRF either by passing
`-o` option to zebra or by creating a file in `/var/run/netns` and
binding it to `/proc/self/ns/net`.
In both cases, only zebra knows about the rename and other daemons learn
about it only after they connect to zebra. This is a problem, because
daemons may read their config before they connect to zebra. To handle
this rename after the config is read, we have some special code in every
single daemon, which is not very bad but not desirable in my opinion.
But things are getting worse when we need to handle this in northbound
layer as we have to manually rewrite the config nodes. This approach is
already hacky, but still works as every daemon handles its own NB
structures. But it is completely incompatible with the central
management daemon architecture we are aiming for, as mgmtd doesn't even
have a connection with zebra to learn from it. And it shouldn't have it,
because operational state changes should never affect configuration.
To solve the problem and simplify the code, I propose to expand the `-o`
option to all daemons. By using the startup option, we let daemons know
about the rename before they read their configs so we don't need any
special code to deal with it. There's an easy way to pass the option to
all daemons by using `frr_global_options` variable.
Unfortunately, the second way of renaming by creating a file in
`/var/run/netns` is incompatible with the new mgmtd architecture.
Theoretically, we could force daemons to read their configs only after
they connect to zebra, but it means adding even more code to handle a
very specific use-case. And anyway this won't work for mgmtd as it
doesn't have a connection with zebra. So I had to remove this option.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add optional NHG ID output to `show ip route` dumps. We have
this in json output already as nexthopGroupID but nice
to have the option in a normal dump as well. Not including in main
output for now to avoid breaking screen scrapers.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
On startup we create a thread timer event to do a rib sweep
of the system. On shutdown we never stopped this timer and
as such we have a situation where a thread event could be run
on shutdown after the data for it has been freed. Here is the
crash I am seeing:
(gdb) bt
(gdb)
Save the thread data in zebra_router and stop the thread so we don't
accidently do work on shutdown we don't mean to. In this case
it happened in our topotests with some severe system load.
Essentially we happened to kill the zebra daemon just as the
graceful_restart timer popped here.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In some cases, zebra may install a nexthop-group id that is
different from the id of the nhe struct attached to a
route-entry. This happens for a singleton recursive nexthop,
for example, where a route is installed with the resolving
nexthop's id.
The installed value is the most useful value - that corresponds
to information in the kernel on linux/netlink platforms that
support nhgs. Display both values if they differ in ascii
output, and include both values in the json form.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
Since f60a1188 we store a pointer to the VRF in the interface structure.
There's no need anymore to store a separate vrf_id field.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
During zebra shutdown, we clear out the LSP workqueue. The LSPs
will be uninstalled and freed during the shutdown process, so
just ignore any LSPs that happen to be on the workqueue.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
At some scale we eventually run out of room displaying v4/v6 route
totals for `show zebra client summ`:
janelle# show zebra client summ
Name Connect Time Last Read Last Write IPv4 Routes IPv6 Routes
--------------------------------------------------------------------------------
bgp 04w0d18h 00:00:19 00:01:2411729127/4052681 2037786/903094
This total over ran the space in just a little over a week of uptime.
Expand to have a bit more room.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The dplane_ctx_get_pbr_ipset_entry function only
failed when the caller did not pass in a valid
usable pointer. Change the code to assert on
a pointer not being passed in and remove the
bool return
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The only time this function ever failed is when
the developer does not pass in a usable pointer
to place the data in. Change it to an assert
to signify to the end developer that is what
we want and then remove all the if checks
for failure
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The function call dplane_ctx_get_pbr_ipset only
returns false when the calling function fails to
pass in a valid ipset pointer. This should
be an assertion issue since it's a programming
issue as opposed to an actual run time issue.
Change the function call parameter to not return
a bool on success/fail for a compile time decision.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We should always treat the VRF interface as a loopback. Currently, this
is not the case, because in some old pre-VRF code we use if_is_loopback
instead of if_is_loopback_or_vrf. To avoid any future problems, the
proposal is to rename if_is_loopback_or_vrf to if_is_loopback and use it
everywhere. if_is_loopback is renamed to if_is_loopback_exact in case
it's ever needed, but currently it's not used anywhere.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
During shutdown, when table_manager_disable is called for the default
VRF, its vrf_id is already set to VRF_UNKNOWN, so the expression is true
and the table manager memory is not freed. Change the expression to
compare the VRF name instead of the id. The check in table_manager_enable
is changed for consistency.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Free the LSP workqueue later during shutdown, so that zebra
has enough time to clean up and uninstall any LSPs.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
