Code's "is_type" is "circuit-type" in CLI, "circuit_type" is "network"
(type) in CLI, and the function to change is_type is
isis_event_circuit_type_change()... *headdesk*
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
A newly-created circuit will be in enabled state but have neither IPv4
nor IPv6 configured. The logic in isis_circuit_af_set assumed that
"enabled" is equivalent to "ip || ipv6".
This is the only place where this distinction is currently relevant, as
the CLI won't allow enabling an interface without enabling either IPv4
or IPv6; and it will also disable a circuit when both are deconfigured.
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Between the awkwardly managed CSM and the tacked-on IPv6 support, the
simplified logic to setup a circuit wasn't quite right.
Note that the API essentially allows creating a circuit without enabling
either IPv4 or IPv6. This wasn't possible before and probably breaks
isisd in 'interesting' ways. The CLI won't do this, so it's only an
issue when adding on other configuration mechanisms.
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Any interface flags/parameter change (e.g., MTU, PROMISC flag change) is
notified by zebra to clients as an "up" event. BGP literally treats this
as the interface coming up and kicks all neighbors on that interface (i.e.,
directly connected peers). When doing so for IPv4 peers on the interface
(numbered or unnumbered /30-/31) or IPv6 numbered peers, peers that may
already be Established are also flapped; when doing so for IPv6 unnumbered
peers (classic 'neighbor swpX interface' scenario with no configured IP
address on interface), only peers not in Established state are processed.
This patch fixes the code to ensure that in all cases, only non-Established
peers are kicked.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Chris Cormier <chriscormier@cumulusnetworks.com>
Ticket: CM-12526
Reviewed By: CCR-5119
Testing Done: Manual, bgp-min
NS_DEFAULT is #defined to 0, We are passing it
in to a function that is taking 'struct zebra_ns *'
which is translating into a NULL pointer. Which
in some situations will cause a crash.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Daniel Walton <dwalton@cumulusnetworks.com>
Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
(cherry picked from commit 1e9fa2763953adc603c3acc4ed2a46c9e72cbb29)
(cherry picked from commit e33efc8aa8)
Ensure we lookup interface across VRFs, not just in the default VRF.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Ticket: CM-12357
Reviewed By: CCR-5097
Testing Done: Manual, bgp-min
Ticket: CM-11777
Reviewed By: CCR-5096
Testing Done:
The recommended, and in many ways the only supported, model for
the configuration file of quagga is to use a single Quagga.conf
configuration file. However, we weren't shipping with this model,
which led to some confusion amongst users. This patch fixes this
by removing all individual daemon configuration files and replacing
it with the single Quagga.conf file.
Made fix to update the redistribute vrf bitmap when vrf goes down and comes up.
Ticket: CM-11982
Reviewed By: CCR-5032
Testing Done: bgp-min passed, manual
The VTY_GET_INTEGER_RANGE macro is failing on arm
with a warning->error issue where we are passing in
a unsigned MAXINT to this macro and it is complaining
that the comparison of (TMPL) > MAXINT is always going
to be false because of data structure size.
I've changed the tmp variable to a unsigned long long
which alleviates this issue.
Ticket: CM-12187
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
There are cases where customers desire the ability to override the
default behavior of installing ipv6 prefixes with a link-local next-hop
if both a link-local and global ipv6 next-op is present in the bgp table.
This fix provides this ability and will allow the global to be used as the
next-hop. This also retains the ability to manually set the ipv6 next-hop
global value as before, and if so, this manual entry will be used for the
next-hop.
Ticket: CM-11480
Signed-off-by: Don Slice
Reviewed By: CCR-4983
Testing Done: Manual testing results attached to the ticket. bgp-min and
bgp-smoke will be completed before committing.
Dynamically figure out the list of .c files that we need to scan
based upon whether or not the daemon is --enabled via configure.
Ticket: CM-12081
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Quentin Young <qlyoung@cumulusnetworks.com>
The 'show commandtree' command was added to the CONFIG_NODE.
We have a basic assumption that CONFIG_NODE commands actually
change state. 'show commandtree' doesn't meet this requirement.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Expense, Error and Delay metrics never quite made it into the real
world. Either way isisd does nothing useful with them, so let's drop
them from the code. If someone wants to implement them, this patch can
still be reverted.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Last isisd CLI cleanup for now. This also folds L1 & L2 configs into
common functions, reducing CLI function bloat by a bit.
(This patch contains changes authored by both Christian Franke and David
Lamparter.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
No setters needed since change of fields doesn't require any
specific action to make it apply. Just move the CLI defs to isis_vty.c.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This cleans up circuit password configuration a little bit.
(Restructured several times by both Christian Franke and David
Lamparter.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Move out basic area configuration (metric type, overload and attachment
bits, dynamic hostname extension enable) into isis_vty.c.
[v2: moved stuff back here that accidentally was in the previous patch]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Create isis_vty.c and start moving off CLI functions into that. These
then call newly-added "nice" API wrappers.
Patch contains significant work authored by Christian Franke.
[v2: removed stuff that crept in from the next patch]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
A few places are using 0 in place of the MTYPE_* argument. The
following rewrite of the alloc tracking won't deal with that, so let's
use MTYPE_TMP instead.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[DL: v2: fix XFREE(0, foo) calls too]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
pim_igmp_join.c only exists to make some portability hacks available to
test_igmpv3_join. The function only has 1 call site in each pimd and
the test tool, so it's nicely served as a simple static function in a
header file.
This removes a MTYPE related compiler/linker issue from referencing
lib/if.h in a binary that doesn't link libzebra, as test_igmpv3_join is
now fully independent of lib/.
(Fix by Christian Franke: remove stray leftover ifindex_t)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- list_add_node_next was in fact unused
- list_add_node_prev performs a subset of listnode_add_before and
its only use in isisd replaced with that.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Make it easier to see which bits in *_snmp.c are actually referenced
from non-SNMP parts of the code.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
AgentX fd/timeout handling is rather hackishly monkeyed into thread.c.
Replace with code that uses plain thread_* functions.
NB: Net-SNMP's API rivals Quagga's in terms of age and absence of
documentation. netsnmp_check_outstanding_agent_requests() in particular
seems to be unused and is therefore untested.
The most useful documentation on this is actually the blog post Vincent
Bernat wrote when he originally integrated this into lldpd and Quagga:
https://vincent.bernat.im/en/blog/2012-snmp-event-loop.html
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Another zoo extension, this adds a timer scheduling function that takes
a struct timeval argument (which is actually what the wrappers boil down
to, yet it's not exposed...)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This utility function, to join the zoo that the Quagga linked-list
implementation has accumulated, does an insert-before while returning
the newly allocated node.
It is similar to:
- listnode_add_after(), but
- complementary direction
- returns allocated node
- list_add_node_prev(), but
- supports before == NULL
- returns allocated node
In general, the entire linked-list implementation is in bad shape, and
while it needs a cleanup / rewrite / replacement, this would both cause
significant conflicts and block other cleanups...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
QUAGGA_CLK_REALTIME and QUAGGA_CLK_REALTIME_STABILISED aren't used
anywhere in the code. Remove. The enum is kept to avoid having to
change the calls everywhere.
Same applies to the workaround code for systems that don't have a
monotonic clock. None of the systems Quagga works on fall into that
category; Linux, BSD and Solaris all do clock_gettime, for OSX we have
mach_absolute_time() - that covers everything.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
quagga_time() will disappear with the next commit, this is the last
remaining user of it.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
While the idea for this came the other way around - removing
quagga_time() - using random() is actually a better idea here. It's
seeded by time to begin with, but if ospfd restarts several times in a
short timespan it won't run straight into the same sequence number.
(Should also update the random seed to include microseconds so restarts
within a second use a different seq#)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The ctime/mtime fields in ospf_route and start_time field in ospf_master
are written but never read, thus entirely useless. Remove them.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
ospf->lsa_refresher_started is only used in relative timing to itself;
replace with monotonic clock which is appropriate for this.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
