- vnc_routemap_update is called only for the last bgp instance
- vpn_policy_routemap_event is not called at all
- unguarded debug (there's already a debug inside the called function)
Make the code consistent with the callback code that is used when the
delay timer is enabled.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
- Add following set clause for route-maps
"set evpn gateway-ip <ipv4|ipv6 >A.B.C.D|X:X::X:X"
- When this route-map is applied as outboubd policy in BGP, it will set the
gateway-ip in BGP attribute For EVPN type-5 routes.
Example configuration:
route-map RMAP-EVPN_GWIP permit 5
set evpn gateway-ip ipv4 50.0.2.12
set evpn gateway-ip ipv6 50:0:2::12
router bgp 101
bgp router-id 10.100.0.1
neighbor 10.0.1.2 remote-as 102
!
address-family l2vpn evpn
neighbor 10.0.1.2 activate
neighbor 10.0.1.2 route-map RMAP-EVPN_GWIP out
advertise-all-vni
exit-address-family
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
We are inconsistently using peer_establiahed(peer) with
sometimes using `peer->status == Established`. Just Convert
over to using the function for consistency.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
set_vpn_nexthop/no_set_vpn_nexthop were failing due to missing
declarations and unused variables.
This adds the missing declaration and removes unused variables.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
This commit introduces the implementation for the north-bound
callbacks for the bgp-specific route-map match and set clauses.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Signed-off-by: Sarita Patra <saritap@vmware.com>
When debugging in bgp is turned on for route-map processing
it would be awful nice to know what afi-safi we are working on
for the particular route-map. Especially when using a route-map
across different peers and different afi/safi's
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
rfc7999:
A BGP speaker receiving an announcement tagged with the BLACKHOLE
community SHOULD add the NO_ADVERTISE or NO_EXPORT community as
defined in [RFC1997], or a similar community, to prevent propagation
of the prefix outside the local AS. The community to prevent
propagation SHOULD be chosen according to the operator's routing
policy.
Sent:
```
router bgp 65534
no bgp ebgp-requires-policy
neighbor 192.168.0.2 remote-as 65030
!
address-family ipv4 unicast
redistribute connected
neighbor 192.168.0.2 route-map spine out
exit-address-family
!
!
ip prefix-list self seq 5 permit 192.168.100.1/32
!
route-map spine permit 10
match ip address prefix-list self
set community blackhole
!
```
Received:
```
spine1-debian-9# show ip bgp 192.168.100.1/32
BGP routing table entry for 192.168.100.1/32
Paths: (1 available, best #1, table default, inform peer to blackhole prefix)
Not advertised to any peer
65534
192.168.0.1 from 192.168.0.1 (192.168.100.1)
Origin incomplete, metric 0, valid, external, best (First path received)
Community: blackhole no-advertise
Last update: Thu Jan 21 12:56:39 2021
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This was toy code used for testing purposes. Code calling Lua should be
very explicit about what is loaded into the Lua state. Also, the
allocator used is exactly the same allocator used by default w/
luaL_newstate().
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Use frrlua_* prefix to differentiate from Lua builtins
* Allow frrlua_initialize to pass an empty script
* Fixup naming of table accessors
* Fixup naming of prefix -> table encoder
* Fixup BGP routemap code to new function names
* Fix includes for frrlua.h
* Clean up doc comments
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The route_map_object_t was being used to track what protocol we were
being called against. But each protocol was only ever calling itself.
So we had a variable that was only ever being passed in from route_map_apply
that had to be carried against and everyone was testing if that variable
was for their own stack.
Clean up this route_map_object_t from the entire system. We should
speed some stuff up. Yes I know not a bunch but this will add up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Sample Configuration with prefix-list and community match rules
---------------------------------------------------------------
R1 ------- R2(DUT) ------- R3
Router2# show running-config
Building configuration...
Current configuration:
!
frr version 7.6-dev-MyOwnFRRVersion
frr defaults traditional
hostname router
log file /var/log/frr/bgpd.log
log syslog informational
hostname Router2
service integrated-vtysh-config
!
debug bgp updates in
debug bgp updates out
!
debug route-map
!
ip route 20.20.0.0/16 blackhole
ipv6 route 2001:db8::200/128 blackhole
!
interface enp0s9
ip address 10.10.10.2/24
!
interface enp0s10
ip address 10.10.20.2/24
!
interface lo
ip address 2.2.2.2/32
!
router bgp 2
bgp log-neighbor-changes
no bgp ebgp-requires-policy
neighbor 10.10.10.1 remote-as 1
neighbor 10.10.20.3 remote-as 3
!
address-family ipv4 unicast
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.20.3 soft-reconfiguration inbound
neighbor 10.10.20.3 advertise-map ADV-MAP non-exist-map EXIST-MAP
exit-address-family
!
ip prefix-list DEFAULT seq 5 permit 1.1.1.5/32
ip prefix-list DEFAULT seq 10 permit 1.1.1.1/32
ip prefix-list EXIST seq 5 permit 10.10.10.10/32
ip prefix-list DEFAULT-ROUTE seq 5 permit 0.0.0.0/0
ip prefix-list IP1 seq 5 permit 10.139.224.0/20
ip prefix-list T2 seq 5 permit 1.1.1.5/32
!
bgp community-list standard DC-ROUTES seq 5 permit 64952:3008
bgp community-list standard DC-ROUTES seq 10 permit 64671:501
bgp community-list standard DC-ROUTES seq 15 permit 64950:3009
bgp community-list standard DEFAULT-ROUTE seq 5 permit 65013:200
!
route-map ADV-MAP permit 10
match ip address prefix-list IP1
!
route-map ADV-MAP permit 20
match community DC-ROUTES
!
route-map EXIST-MAP permit 10
match community DEFAULT-ROUTE
match ip address prefix-list DEFAULT-ROUTE
!
line vty
!
end
Router2#
Router2# show ip bgp 0.0.0.0
BGP routing table entry for 0.0.0.0/0
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
10.10.10.1 10.10.20.3
1
10.10.10.1 from 10.10.10.1 (10.139.224.1)
Origin IGP, metric 0, valid, external, best (First path received)
Community: 64848:3011 65011:200 65013:200
Last update: Tue Oct 6 02:39:42 2020
Router2#
Sample output with non-exist-map when default route present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 10.10.10.1 0 0 1 i
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 4 routes and 4 total paths
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i <<<<<<<<< non-exist-map : 0.0.0.0/0 is present so, 10.139.224.0/20 not advertised
Total number of prefixes 2
Sample output with non-exist-map when default route not present in table
------------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 3 routes and 3 total paths
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i
*> 10.139.224.0/20 0.0.0.0 0 1 ? <<<<<<<<< non-exist-map : 0.0.0.0/0 is not present so, 10.139.224.0/20 advertised
Total number of prefixes 3
Router2#
Sample output with exist-map when default route present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 10.10.10.1 0 0 1 i
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 4 routes and 4 total paths
Router2#
Router2#
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 0.0.0.0 0 1 i
*> 1.1.1.1/32 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i
*> 10.139.224.0/20 0.0.0.0 0 1 ? <<<<<<<<< exist-map : 0.0.0.0/0 is present so, 10.139.224.0/20 advertised
Total number of prefixes 4
Router2#
Sample output with exist-map when default route not present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 3 routes and 3 total paths
Router2#
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.5/32 0.0.0.0 0 1 i <<<<<<<<< exist-map : 0.0.0.0/0 is not present so, 10.139.224.0/20 not advertised
Total number of prefixes 1
Router2#
Signed-off-by: Madhuri Kuruganti <k.madhuri@samsung.com>
Sample configuration along with route-map filter
------------------------------------------------
Router2# show running-config
Building configuration...
Current configuration:
!
frr version 7.6-dev-MyOwnFRRVersion
frr defaults traditional
hostname router
log file /var/log/frr/bgpd.log
log syslog informational
hostname Router2
service integrated-vtysh-config
!
debug bgp updates in
debug bgp updates out
!
debug route-map
!
ip route 200.200.0.0/16 blackhole
ipv6 route 2001:db8::200/128 blackhole
!
interface enp0s9
ip address 10.10.10.2/24
!
interface enp0s10
ip address 10.10.20.2/24
!
interface lo
ip address 2.2.2.2/24
ipv6 address 2001:db8::2/128
!
router bgp 2
bgp log-neighbor-changes
no bgp ebgp-requires-policy
neighbor 10.10.10.1 remote-as 1
neighbor 10.10.20.3 remote-as 3
!
address-family ipv4 unicast
network 2.2.2.0/24
network 200.200.0.0/16
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.10.1 route-map RMAP_PERMIT_100 out
neighbor 10.10.10.1 advertise-map ADVERTISE non-exist-map CONDITION
neighbor 10.10.20.3 soft-reconfiguration inbound
exit-address-family
!
address-family ipv6 unicast
network 2001:db8::2/128
network 2001:db8::200/128
neighbor 10.10.10.1 activate
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.10.1 route-map CONDITION_6 out
neighbor 10.10.10.1 advertise-map ADVERTISE_6 non-exist-map CONDITION_6
neighbor 10.10.20.3 activate
neighbor 10.10.20.3 soft-reconfiguration inbound
exit-address-family
!
access-list CONDITION seq 5 permit 3.3.3.0/24
access-list ADVERTISE seq 6 permit 200.200.0.0/16
access-list ADVERTISE seq 7 permit 20.20.0.0/16
access-list ADVERTISE seq 5 permit 2.2.2.0/24
access-list RMAP_PERMIT_100 seq 4 permit 100.100.0.0/16
!
ipv6 access-list ADVERTISE_6 seq 5 permit 2001:db8::2/128
ipv6 access-list CONDITION_6 seq 5 permit 2001:db8::3/128
!
route-map ADVERTISE permit 10
match ip address ADVERTISE
!
route-map CONDITION permit 10
match ip address CONDITION
!
route-map ADVERTISE_6 permit 10
match ipv6 address ADVERTISE_6
!
route-map CONDITION_6 permit 10
match ipv6 address CONDITION_6
!
route-map RMAP_PERMIT_100 permit 10
match ip address RMAP_PERMIT_100
!
line vty
!
end
Sample output when non-exist-map prefixes present in BGP table
--------------------------------------------------------------
Router2# show ip bgp all wide
For address family: IPv4 Unicast
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 10.10.10.1 0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 3.3.3.0/24 10.10.20.3 0 0 3 i
*> 100.100.0.0/16 10.10.20.3 0 0 3 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Displayed 5 routes and 5 total paths
For address family: IPv6 Unicast
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 fe80::a00:27ff:fecb:ad57 0 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::3/128 fe80::a00:27ff:fe76:6738 0 0 3 i
*> 2001:db8::200/128 :: 0 32768 i
Displayed 4 routes and 4 total paths
Router2#
Router2#
Router2#
Router2#
Router2# show ip bgp all neighbors 10.10.10.1 advertised-routes wide
For address family: IPv4 Unicast
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 100.100.0.0/16 0.0.0.0 0 3 i
Total number of prefixes 1
For address family: IPv6 Unicast
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::3/128 :: 0 3 i
Total number of prefixes 1
Router2#
Sample output when non-exist-map prefixes not present in BGP table
------------------------------------------------------------------
Router2# show ip bgp all wide
For address family: IPv4 Unicast
BGP table version is 6, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 10.10.10.1 0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 100.100.0.0/16 10.10.20.3 0 0 3 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Displayed 4 routes and 4 total paths
For address family: IPv6 Unicast
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 fe80::a00:27ff:fecb:ad57 0 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::200/128 :: 0 32768 i
Displayed 3 routes and 3 total paths
Router2#
Router2# show ip bgp all neighbors 10.10.10.1 advertised-routes wide
For address family: IPv4 Unicast
BGP table version is 6, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 100.100.0.0/16 0.0.0.0 0 3 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Total number of prefixes 3
For address family: IPv6 Unicast
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::2/128 :: 0 32768 i
Total number of prefixes 1
Router2#
Signed-off-by: Madhuri Kuruganti <k.madhuri@samsung.com>
Implemented as per the feature description given in the source link.
Descriprion:
The BGP conditional advertisement feature uses the non-exist-map or exist-map
and the advertise-map keywords of the neighbor advertise-map command in order
to track routes by the route prefix.
non-exist-map :
If a route prefix is not present in output of the non-exist-map command, then
the route specified by the advertise-map command is announced.
exist-map :
If a route prefix is present in output of the exist-map command, then the route
specified by the advertise-map command is announced.
The conditional BGP announcements are sent in addition to the normal
announcements that a BGP router sends to its peers.
The conditional advertisement process is triggered by the BGP scanner process,
which runs every 60 seconds. This means that the maximum time for the conditional
advertisement to take effect is 60 seconds. The conditional advertisement can take
effect sooner, depending on when the tracked route is removed from the BGP table
and when the next instance of the BGP scanner occurs.
Sample Configuration on DUT
---------------------------
Router2# show running-config
Building configuration...
Current configuration:
!
frr version 7.6-dev-MyOwnFRRVersion
frr defaults traditional
hostname router
log file /var/log/frr/bgpd.log
log syslog informational
hostname Router2
service integrated-vtysh-config
!
debug bgp updates in
debug bgp updates out
!
debug route-map
!
ip route 200.200.0.0/16 blackhole
ipv6 route 2001:db8::200/128 blackhole
!
interface enp0s9
ip address 10.10.10.2/24
!
interface enp0s10
ip address 10.10.20.2/24
!
interface lo
ip address 2.2.2.2/24
ipv6 address 2001:db8::2/128
!
router bgp 2
bgp log-neighbor-changes
no bgp ebgp-requires-policy
neighbor 10.10.10.1 remote-as 1
neighbor 10.10.20.3 remote-as 3
!
address-family ipv4 unicast
network 2.2.2.0/24
network 200.200.0.0/16
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.10.1 advertise-map ADVERTISE non-exist-map CONDITION
neighbor 10.10.20.3 soft-reconfiguration inbound
exit-address-family
!
address-family ipv6 unicast
network 2001:db8::2/128
network 2001:db8::200/128
neighbor 10.10.10.1 activate
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.10.1 advertise-map ADVERTISE_6 non-exist-map CONDITION_6
neighbor 10.10.20.3 activate
neighbor 10.10.20.3 soft-reconfiguration inbound
exit-address-family
!
access-list CONDITION seq 5 permit 3.3.3.0/24
access-list ADVERTISE seq 5 permit 2.2.2.0/24
access-list ADVERTISE seq 6 permit 200.200.0.0/16
access-list ADVERTISE seq 7 permit 20.20.0.0/16
!
ipv6 access-list ADVERTISE_6 seq 5 permit 2001:db8::2/128
ipv6 access-list CONDITION_6 seq 5 permit 2001:db8::3/128
!
route-map ADVERTISE permit 10
match ip address ADVERTISE
!
route-map CONDITION permit 10
match ip address CONDITION
!
route-map ADVERTISE_6 permit 10
match ipv6 address ADVERTISE_6
!
route-map CONDITION_6 permit 10
match ipv6 address CONDITION_6
!
line vty
!
end
Router2#
Withdraw when non-exist-map prefixes present in BGP table:
----------------------------------------------------------
Router2# show ip bgp all wide
For address family: IPv4 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 10.10.10.1 0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 3.3.3.0/24 10.10.20.3 0 0 3 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Displayed 4 routes and 4 total paths
For address family: IPv6 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 fe80::a00:27ff:fecb:ad57 0 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::3/128 fe80::a00:27ff:fe76:6738 0 0 3 i
*> 2001:db8::200/128 :: 0 32768 i
Displayed 4 routes and 4 total paths
Router2#
Router2# show ip bgp neighbors 10.10.10.1
BGP neighbor is 10.10.10.1, remote AS 1, local AS 2, external link
!--- Output suppressed.
For address family: IPv4 Unicast
Update group 9, subgroup 5
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION, Advertise-map *ADVERTISE, status: Withdraw
1 accepted prefixes
For address family: IPv6 Unicast
Update group 10, subgroup 6
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION_6, Advertise-map *ADVERTISE_6, status: Withdraw
1 accepted prefixes
!--- Output suppressed.
Router2#
Here 2.2.2.0/24 & 200.200.0.0/16 (prefixes in advertise-map) are withdrawn
by conditional advertisement scanner as the prefix(3.3.3.0/24) specified
by non-exist-map is present in BGP table.
Router2# show ip bgp all neighbors 10.10.10.1 advertised-routes wide
For address family: IPv4 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 0.0.0.0 0 1 i
*> 3.3.3.0/24 0.0.0.0 0 3 i
Total number of prefixes 2
For address family: IPv6 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 :: 0 1 i
*> 2001:db8::3/128 :: 0 3 i
*> 2001:db8::200/128 :: 0 32768 i
Total number of prefixes 3
Router2#
Advertise when non-exist-map prefixes not present in BGP table:
---------------------------------------------------------------
After Removing 3.3.3.0/24 (prefix present in non-exist-map),
2.2.2.0/24 & 200.200.0.0/16 (prefixes present in advertise-map) are advertised
Router2# show ip bgp all wide
For address family: IPv4 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 10.10.10.1 0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Displayed 3 routes and 3 total paths
For address family: IPv6 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 fe80::a00:27ff:fecb:ad57 0 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::200/128 :: 0 32768 i
Displayed 3 routes and 3 total paths
Router2#
Router2# show ip bgp neighbors 10.10.10.1
!--- Output suppressed.
For address family: IPv4 Unicast
Update group 9, subgroup 5
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION, Advertise-map *ADVERTISE, status: Advertise
1 accepted prefixes
For address family: IPv6 Unicast
Update group 10, subgroup 6
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION_6, Advertise-map *ADVERTISE_6, status: Advertise
1 accepted prefixes
!--- Output suppressed.
Router2#
Router2# show ip bgp all neighbors 10.10.10.1 advertised-routes wide
For address family: IPv4 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 0.0.0.0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Total number of prefixes 3
For address family: IPv6 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 :: 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::200/128 :: 0 32768 i
Total number of prefixes 3
Router2#
Signed-off-by: Madhuri Kuruganti <k.madhuri@samsung.com>
Instead of just counting the route suppressions, keep a reference for
all aggregations that are doing it. It should help the with the
following problems:
- Which aggregation suppressed the route.
- Double suppression
- Double unsuppression
- Avoids calling `bgp_process` if already suppressed/unsuppressed.
- Easier code maintenance and understanding
This also fixes a crash when modifying a route map that is
associated with a working aggregate-address.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add new aggregate-address option to selectively suppress routes based
on route map results.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
We have this pattern in the code base:
if (thread)
THREAD_OFF(thread);
If we look at THREAD_OFF we check to see if thread
is non-null too. So we have a double check.
This is unnecessary. Convert to just using THREAD_OFF
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Example configuration:
route-map SET_SR_POLICY permit 10
set sr-te color 1
!
router bgp 1
bgp router-id 1.1.1.1
neighbor 2.2.2.2 remote-as 1
neighbor 2.2.2.2 update-source lo
address-family ipv4 unicast
neighbor 2.2.2.2 next-hop-self
neighbor 2.2.2.2 route-map SET_SR_POLICY in
exit-address-family
!
!
Learned BGP routes from 2.2.2.2 are mapped to the SR-TE Policy
which is uniquely determined by the BGP nexthop (2.2.2.2 in this
case) and the SR-TE color in the route-map.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
because ecommunity structure can host both ext community and ipv6 ext
community, do not forget to set the unit_size field.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
until now, the assumption was done in bgp flowspec code that the
information contained was an ipv4 flowspec prefix. now that it is
possible to handle ipv4 or ipv6 flowspec prefixes, that information is
stored in prefix_flowspec attribute. Also, some unlocking is done in
order to process ipv4 and ipv6 flowspec entries.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
This is the bulk part extracted from "bgpd: Convert from `struct
bgp_node` to `struct bgp_dest`". It should not result in any functional
change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When issuing the command `match ip next-hop address`
bgp would crash. This is because the no form of the
command was making the address optional and we would
try to read data we should not be.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Replace all `random()` calls with a function called `frr_weak_random()`
and make it clear that it is only supposed to be used for weak random
applications.
Use the annotation described by the Coverity Scan documentation to
ignore `random()` call warnings.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This macro is undefined if vnc is disabled, and while it defaults to 0,
this is still wrong and causes issues with -Werror
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When announcing ourselves as the next hop (e.g., to EBGP peers), if the
best path has the link bandwidth extended community and it is transitive,
change the value of the link bandwidth to the cumulative downstream
bandwidth (sum of the link bandwidths of all our multipaths) as this
makes the most sense. It is also implied by
https://tools.ietf.org/html/draft-mohanty-bess-ebgp-dmz. Of course, do
not override the link bandwidth if it has been specified by policy.
Note: Transitive extended communities will be automatically passed along
to EBGP peers; this commit is updating the value that is announced to
something that is the most appropriate.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Implement the code to handle the other route-map options to generate
the link bandwidth, namely, to use the cumulative bandwidth or to
base this on the number of multipaths. In the latter case, a reference
bandwidth is internally chosen - the implementation uses a value of
1 Gbps.
These additional options mean that the prefix may need to be advertised
if there is a link bandwidth change, which is a new criteria. Define a
new path (change) flag to support this and implement the advertisement.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
The BGP link bandwidth extended community must not be repeated. If the
attribute already carries this and the route-map specifies a new value,
the implementation will honor the policy configuration and overwrite
the existing values.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement route-map option to set the link-bandwidth extended
community. The command is of the form:
set extcommunity bandwidth <(1-26214400)|cumulative|num-multipaths>
[non-transitive]
The options available are to specify the actual bandwidth value in
Mbps, base it on the cumulative downstream bandwidth or base it on
the number of multipaths. The last option is based on
https://tools.ietf.org/html/draft-mohanty-bess-ebgp-dmz. Further,
in alignment with the use case described in this IETF draft, the
extended community is encoded as transitive by default. There is an
option available to specify that it should be non-transitive.
The link-bandwidth itself is carried in bytes per second as specifed in
https://tools.ietf.org/html/draft-ietf-idr-link-bandwidth
Note: This commit only handles the processing for bandwidth specifed
as a value; subsequent commits will handle the processing of the other
options.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Add new function `bgp_node_get_prefix()` and modify
the bgp code base to use it.
This is prep work for the struct bgp_dest rework.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
this command is missing, compared with 'match ipv6 next-hop' command
available. Adding it by taking into account the backward compatible
effect when supposing that some people have configured acls with name
being an ipv4 address.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
We already have a generic support for add/sub in route-maps. It's already
handled in route_value_compile().
Just convert to string (allow passing (-) minus sign) - works like expected.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
With this code change, we can now filter evpn routes based on RD using the
match statement: "match evpn rd XX"
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
We make the assumption that ->attr is not NULL throughout
the code base. We are totally inconsistent about application
of this though.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
this table identifier can be used for policy routing. incoming entries
are locally exported to that local table identifier.
note that so that the user applies the new table identifier to all
entries, the user should flush local tables first.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
User pass the string match large-community 1 exact-match from CLI.
Now route map lib has got the string as "1 exact-match". It passes the string
to call back for compilation. BGP will parse this string and came to know
that for "1" it has to do exact match. Routemap lib has to save "1" in it’s
dependency table. Here routemap is saving this as a “1 exact-match”
which is wrong. The solution is used the compiled data.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Allow bgp to set a local Administrative distance to use
for installing routes into the rib.
Example:
!
router bgp 9323
bgp router-id 1.2.3.4
neighbor enp0s8 interface remote-as external
!
address-family ipv4 unicast
neighbor enp0s8 route-map DISTANCE in
exit-address-family
!
route-map DISTANCE permit 10
set distance 153
!
line vty
!
end
eva# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued route, r - rejected route
B 0.0.0.0/0 [153/0] via fe80::a00:27ff:fe84:c2d6, enp0s8, 00:00:06
K>* 0.0.0.0/0 [0/100] via 10.0.2.2, enp0s3, 00:06:31
B>* 1.1.1.1/32 [153/0] via fe80::a00:27ff:fe84:c2d6, enp0s8, 00:00:06
B>* 1.1.1.2/32 [153/0] via fe80::a00:27ff:fe84:c2d6, enp0s8, 00:00:06
B>* 1.1.1.3/32 [153/0] via fe80::a00:27ff:fe84:c2d6, enp0s8, 00:00:06
C>* 10.0.2.0/24 is directly connected, enp0s3, 00:06:31
K>* 169.254.0.0/16 [0/1000] is directly connected, enp0s3, 00:06:31
eva#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
`set ipv6 next-hop prefer-global` is not working on IPv4 peers.
In MP-BGP, bgp routers can advertising IPv6 routes over IPv4 peers.
Remove the peer's remote address AFI type checking.
Signed-off-by: shikenghua <kh_shi@edge-core.com>
Conver these functions:
route_map_add_match
route_map_delete_match
route_map_add_set
route_map_delete_set
To return the `enum rmap_compile_rets` and ensure all functions
that use this code handle all the enumerated possible returns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `set as-path prepend last-as X` command had no, 'no' form
of the command. Add this into the cli.
Testing:
!
route-map BLARBLE permit 10
set as-path prepend last-as 3
!
!
router bgp 9999
neighbor 10.50.12.118 remote-as external
neighbor 10.50.12.118 ebgp-multihop 30
!
address-family ipv4 unicast
neighbor 10.50.12.118 route-map BLARBLE in
!
!
eva# show bgp ipv4 uni 4.4.4.4
BGP routing table entry for 4.4.4.4/32
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
10.50.12.118
999 999 999 999
10.50.12.118 from 10.50.12.118 (10.50.12.118)
Origin incomplete, metric 0, valid, external, best (First path received)
Last update: Mon Aug 26 09:47:17 2019
eva# conf
eva(config)# route-map BLARBLE permit 10
eva(config-route-map)# no set as-path prepend last-as 3
eva(config-route-map)# end
eva# clear bgp ipv4 uni *
eva# show bgp ipv4 uni 4.4.4.4
BGP routing table entry for 4.4.4.4/32
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
10.50.12.118
999
10.50.12.118 from 10.50.12.118 (10.50.12.118)
Origin incomplete, metric 0, valid, external, best (First path received)
Last update: Mon Aug 26 09:48:31 2019
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Say for eg., 256 prefix-list entries are pasted to VTYSH.
This results in BGP processing the events for several minutes.
BGPD starts a timer for 5 seconds when the first dependency configuraion
is received. On timer expiry, BGP process dependent route-maps.
After this processing, BGPD reads the configurations received in the
next 5 seconds and then re-processes the route-maps from the beginning.
This cyclic re-processing consumes time and CPU cycles.
Instead of starting a timer when the first configuration is received,
everytime a configuration is received, the existing timer is reset.
This would mean that all the configurations are read first before the timer
expires. This eliminates the cyclic re-processing.
Signed-off-by: NaveenThanikachalam nthanikachal@vmware.com
Issue1: When a vni in-filter eg:"neighbor X.X.X.X route-map RM-VNI-FILTER in"
is configured under evpn address-family, all the received routes are dropped
regardless of whether the route has a matching vni or not.
(Where RM-VNI-FILTER contains "match evpn vni 100")
Issue2: Routes with 2 labels are not filtered correctly
Issue3: This filter should not get applied for MPLS routes. For MPLS routes,
we need route-map to handle a 3rd state besides match/nomatch called: noop.
Fix1: The handler bgp_update() that services the received route ignored the
route's label while deciding whether to filter it or not.
As part of the fix, the handler now uses the label info to make the
decision about whether to filter the route or not.
Fix2: route_match_vni() now tries to match both the labels within the route
Fix3: route_match_vni() should return noop when it encounters an mpls based
route. For this, route_map library should handle this 3rd state: RMAP_NOOP.
Related fix : Extract tunnel type
This fix relies on PR 4314 #4314 to extract the tunnel type from bgp extended
communities. The information about the route's tunnel type (vxlan or mpls)
is needed to apply "match evpn vni xx" rule. This rule is applicable to
vxlan routes, and should exit safely for mpls based evpn routes.
Signed-off-by: Lakshman Krishnamoorthy lkrishnamoor@vmware.com
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
State1:
If match cmd returns RMAP_MATCH then, keep existing behaviour.
If routemap type is PERMIT, execute set cmds or call cmds if applicable,
otherwise PERMIT!
Else If routemap type is DENY, we DENYMATCH right away
State2:
If match cmd returns RMAP_NOMATCH, continue on to next route-map. If there
are no other rules or if all the rules return RMAP_NOMATCH, return DENYMATCH
We require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Also, this rule should be applicable for routes with VNI label only, and
not for routes without labels. For example, type 3 and type 4 EVPN routes
do not have labels, so, this match cmd should let them through.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
As a result we have a 3rd state:
State3:
If match cmd returned RMAP_NOOP
Then, proceed to other route-map, otherwise if there are no more
rules or if all the rules return RMAP_NOOP, then, return RMAP_PERMITMATCH.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Some code to cleanup bgp routemap.c a bit.
Addint to this, if a bgp flowspec entry contains a destination IP address,
then the ip address is compared against the prefix-list referenced into
the route-map used.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Donald Sharp <sharpd@cumulunetworks.com>
FRR has a provision to give exact-match in match clause for
standard community, but this option is missing for lcommunity.
Part 2 : CLI related changes for match clause
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Issue1: When "neighbor X.X.X.X route-map RM-VNI-FILTER in" is configured under evpn address-family,
all the received routes are dropped regardless of whether the route has a matching vni or not.
Issue2: Routes with 2 labels are not filtered correctly
Issue3: Interpreting the label based on tunnel type, vxlan was not done correctly.
Vxlan label has 24 bits, whereas, MPLS label is 20 bits long
Fix1: The handler bgp_update() that services the received route ignored the route's label while deciding whether to filter it or not. As part of the fix, the handler now uses the label info to make the decision about whether to filter the route or not.
Fix2: route_match_vni() now tries to match both the labels within the route, not just the one.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Say, more than one sequence of a route-map uses the same named entity
in its match clause. After that entity is removed from any one of the
route-map sequences, any further changes made to that entity doesn't
dynamically take effect.
A reference counter, that allows the named entity to keep a count of
the route-maps dependent on it, has been introduced to address this issue.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
Action: Apply route-map match and return the result (RMAP_MATCH/RMAP_NOMATCH)
State1: Receveived RMAP_MATCH
THEN: If Routemap type is PERMIT, execute other rules if applicable,
otherwise we PERMIT!
Else: If Routemap type is DENY, we DENYMATCH right away
State2: Received RMAP_NOMATCH, continue on to next route-map, otherwise,
return DENYMATCH by default if nothing matched.
With reference to PR 4078 (https://github.com/FRRouting/frr/pull/4078),
we require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP (or another enum) to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
Question: Do we repurpose an existing enum RMAP_OKAY or RMAP_ERROR
as the 3rd state (or create a new enum like RMAP_NOOP)?
RMAP_OKAY and RMAP_ERROR are used to return the result of set cmd.
We chose to go with RMAP_NOOP (but open to ideas),
as a way to bypass the rmap filter
As a result we have a 3rd state:
State3: Received RMAP_NOOP
Then, proceed to other route-map, otherwise return RMAP_PERMITMATCH by default.
Signed-off-by:Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
The flag PEER_FLAG_RSERVER_CLIENT is never set on peer->flags
and as such testing the flag for not being set will never
cause the if statement to be not entered.
Conversely setting update to 0 and then testing if (update && ...
will always cause another if statement to be never called, remove
it as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The route_map_event_hook callback was passing the `route_map_event_t`
to each individual interested party. No-one is ever using this data
so let's cut to the chase a bit and remove the pass through of data.
This is considered ok in that the routemap.c code came this way
originally and after 15+ years no-one is using this functionality.
Nor do I see any `easy` way to do anything useful with this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Each of Lua's major versions are incompatible with each other. Ubuntu,
at least, does not provide a single liblua.so or /usr/include/lua; all
SOs and headers are versioned, e.g. liblua5.3.so and
/usr/include/lua5.3. There's already an m4 macro in the GNU collection
to handle this situation, so let's use that.
This allows building with Lua enabled to work on platforms other than
Fedora.
* Move lib/lua.[ch] -> lib/frrlua.[ch] to prevent path conflicts
* Fix configure.ac search for proper CPP and linker flags
* Add Lua include path to AM_CPPFLAGS
* Update vtysh/extract.pl.in
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
After a router reboot the L3 network via it converges before the L2
network. This is because MLAG intentionally holds down bridge-access
and vxlan-network ports for some time (MLAG init-delay) to prevent traffic
from switching to a router that is not fully ready. This also means that
routes (from vrf-peering sessions) that qualify for evpn type-5
advertisments are available long before the L3-VNI is available for that
tenant VRF. In these windows bgpd was adding these evpn-type-5 routes with
a L3-VNI of 0 (which was not fixed up after the L3-VNI became available) -
BGP routing table entry for 100.0.0.1:2:[5]:[0]:[0]:[32]:[200.1.1.1]
Paths: (1 available, best #1)
Advertised to non peer-group peers:
MSP1(uplink-1) MSP2(uplink-2)
Route [5]:[0]:[0]:[32]:[200.1.1.1] VNI 0 >>>>>>>>
65001 65535
36.0.0.9 from 0.0.0.0 (27.0.0.9)
Origin incomplete, metric 0, valid, sourced, local, bestpath-from-AS 65001, best
Extended Community: ET:8 RT:5544:4001 Rmac:44:38:39:ff:ff:01
AddPath ID: RX 0, TX 327
Last update: Wed Feb 27 18:37:10 2019
Fix is to defer creating type-5 routes till the L3-VNI is available for
that tenant VRF (this was already being done for most cases; fixup takes
care of some that missed the check).
Ticket: CM-24022
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The community_delete and lcommunity_delete functionality was
creating a special string that needed to be specially parsed.
Remove all this string creation and just pass the pertinent
data into the appropriate functions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The struct prefix *prefix is really a const struct prefix *
This was causing compile warns->errors on some compilers
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For VRF route leak, enable route map filter based
on "source-vrf" check.
Implemented match filter rule for "source-vrf" which
compares leaked routes original vrf_id (where it leaked from)
during importing into target VRF.
Ticket:CM-23776
Reviewed By:
Testing Done:
Configure vrf route leak from vrf1 to vrf2,
configure import vrf under vrf2 along with route-map
with source-vrf filter.
Add and remove source-vrf filter and checked routes
were added and removed to vrf2 table via vpn (default) table.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Made changes and updated the routemap applied counter in the following flows.
1.Increment when route map attached to a list.
2.Decrement when route map removed / modified from a list.
3.Increment/decrement when route map create/delete callback triggered.
4.Besides ,This counter need not be updated when a route map is got updated.
i.e changing/adding a match value to the existing routemap.
In BGP , same update api called for all three add/delete/update operation .
But this counter have to be updated only for routemap addition.
Addressed this specific change by identifying the routemap operation based
on routemap pointer.
Signed-off-by: RajeshGirada <rgirada@vmware.com>
Route-map filtering is based on the value of
"bgp->adv_cmd_rmap[afi][safi].map". For example, we advertise routes in
bgp_evpn_advertise_type5_routes() based on the value of
"bgp->adv_cmd_rmap[afi][safi].map". This variable gets populated in vty
handler bgp_evpn_advertise_type5. This variable will not get populated
if we have not yet applied the route-map configuration. The fix is to
correctly populate "bgp->adv_cmd_rmap[afi][safi].map" in
bgp_route_map_process_update() if it has not been populated before.
Ticket: CM-23263
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8163
Further refine the previous commit to store the hash value in
both the `struct community_list` as well as the `struct rmap_community`
structures. This allows us to know a priori what our hash value
is. This change cuts another couple of seconds of convergence
off to ~55 seconds and further reduces cpu load of bgp:
16 40061.706 433732 92 330102 129 1242965 RWTEX TOTAL
Down from ~43 seconds previously.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The community_list_lookup function is being changed in a future
commit. As such we want to use the `struct rmap_community` data
structure for storing compiled information about communities,ecommunities
or lcommunities.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These two commands previously required the whole original command but
we should allow the user to shorten out this since the data at the
end is not required to figure out what to delete.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The ability to shorten the extended community commands for routemaps
upon removal should be allowed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow user to enter `no set community` to remove the community
set for the route-map.
Fixes: #3491
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_static_set_node_info and bgp_static_get_node_info
function names were slightly backwards rename to
bgp_node_get_bgp_static_info and bgp_node_set_bgp_static_info
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Cleanup the bgp_route_map_process_update code to be a bit
easier to read as that it approached the right side of the
80 column limit a whole bunch and became hard to read.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fix the missed usage of bgp_static_get_node_info and also
cleanup the function around it that was using it to make
it a bit more readable.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
community_free, lcommunity_free and ecommunity_free are similar type of functions. Most of the places, these three are called together. The signature of community_free is different from other two functions. Modified the community_free API signature to align with other two functions to avoid any confusion. There is no functionality impact with this and this is just to avoid any confusion.
Testing: manual testing and show commands
Signed-off-by: Sri Mohana Singamsetty msingamsetty@vmware.com
Do a straight conversion of `struct bgp_info` to `struct bgp_path_info`.
This commit will setup the rename of variables as well.
This is being done because `struct bgp_info` is not descriptive
of what this data actually is. It is path information for routes
that we keep to build the actual routes nexthops plus some extra
information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Please note this is a Proof of Concept and not actually something
that is ready to commit at this point. The file tools/lua.scr
contains some documentation on how we expect it to work currently.
Additionally not all bgp values have been hooked up into the
ability to lua script yet.
There is still significant work to be done here:
1) Add the ability to pass in more data and to adjust the return values
as appropriate.
To set it up:
1) copy tools/lua.scr into /etc/frr (or whereever the config
directory is )
2) Create a route-map match command:
!
router bgp 55
neighbor 10.50.11.116 remote-as external
!
address-family ipv4 unicast
neighbor 10.50.11.116 route-map TEST in
exit-address-family
!
route-map TEST permit 10
match command mooey
!
3) In the lua.scr file make sure that you have a function
named 'mooey' ( as the above example does ):
function mooey ()
zlog_debug(string.format("Family: %d: %s %d ifindex: %d aspath: %s localpref: %d",
prefix.family, prefix.route,
nexthop.metric, nexthop.ifindex, nexthop.aspath, nexthop.localpref))
nexthop.metric = 33
nexthop.localpref = 13
return 3
end
This example script modifies the metric and localpref currently. I've also provided
a zlog_debug function in lua to allow some simple debugging.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When calling route_map_finish, every place that we do we must
first set the deletion event to NULL, or we will create an infinite
loop, if we are using the delayed route-map application code.
As such we might as well just make the route_map_finish code
do this work, as that there is really no viable alternative here
and route_map_finish should only be called on shutdown.
This fixes an infinite loop in zebra on shutdown when there
are route-maps.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The route_map_walk_update_list callback function
never uses the return code, so just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
route_map_mark_updated has a `int del_later` variable
that is passed in but never used. Just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When evpn configured wiht route-map with vni which is not
configured. Upon receiving evpn routes (i.e Type-2, Type-3),
route-map match will be triggered. Since there is no l2vni
exists in db, some of the member fields in bgp_info (i.e.
dummy_info_extra) are passed uninitialized to evpn filter match cb.
This results in inaccessible memory causes crash.
Fix is to memset the bgp_info prior to passing to evpn filter cb.
In evpn vni filter cb, ensure to have NULL check for member filed
of the bgp_info.
memset bgp_info at few places where it is passed to route_match.
Ticket:CM-21335
Reviewed By:
Testing Done:
Configure route-map with not configured l2vni
Simulate to learn l2vpn type-2, 3 route
Restart frr.service with below config
address-family l2vpn evpn
neighbor fear route-map EVPN_VNI out
route-map EVPN_VNI deny 10
match evpn vni 140010
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
While the current implementation does pay attention to the AF
(inet/inet6) when comparing the IPv4/v6 address against an address-list
/ prefix-list inside a route-map, the AF check is being done rather
late, which leads to CPU cycles being wasted due to unnecessary list
lookups / address matching.
This commit checks the address family of a prefix right inside the
`route_match_ip(v6)_` functions before looking up any address- and/or
prefix-list, which should improve performance.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
EVPN prefix depends on the EVPN route type.
Currently, in FRR we have a prefix_evpn/evpn_addr which relates to a evpn prefix.
We need to convert this to encompass an union of various EVPN route-types.
This diff handles the necessary code changes to adopt the new struct evpn_addr.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
- add "debug bgp vpn label" CLI
- improved debug messages for "debug bgp bestpath"
- send vrf label to zebra after zebra informs bgpd of vrf_id
- withdraw vrf_label from zebra if zebra informs bgpd that vrf_id is disabled
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
A Border Leaf can originate a default route
for all the leafs within the POD.
However, we do not want to advertise this route outside the POD.
Therefore, we provide an option
to filter a EVPN type5 default route through a route-map.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
FRR/CL provides the means for injecting regular (IPv4) routes
from the BGP RIB into EVPN as type-5 routes.
This needs to be enhanced to allow selective injection.
This can be achieved by adding a route-map option
for the "advertise ipv4/ipv6 unicast" command.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
In many situations, it is desirable to only exchange EVPN routes of a particular type.
For e.g., a common deployment scenario for large DCs
is to sub-divide the DC into multiple PODs with full host mobility within a POD
(i.e., all subnets provisioned on all leaf switches within the POD)
but only do prefix-based routing across PODs.
This can be achieved by only exchanging EVPN type-5 routes across PODs.
Implement a policy to filter EVPN routes based on route type.
Ticket: CM-19394
Review: CCR-7139
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
When doing symmetric routing,
EVPN type-2 (MACIP) routes need to be advertised with two labels (VNIs)
the first being the L2 VNI (identifying the VLAN) and
the second being the L3 VNI (identifying the VRF).
The receive processing needs to handle one or two labels too.
Ticket: CM-18489
Review: CCR-6949
Testing: manual and bgp/evpn/mpls smoke
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Building a communities json object every time is
both expensive and memory wasteful. Modify
code to only build the json object when needed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The usage of XMALLOC for route_match_peer_compile causes
the pc->interface to be non-NULL. The code assumes that
pc->interface will be NULL.
Ticket: CM-18824
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There are multiple places that we use route-maps in bgp
There is no need to limit the route-map 'match peer ...' command
to just import and export route-map types. I see need for
using this in table-maps as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If upon bgp startup we have this config:
router bgp 64540
neighbor 192.168.201.134 remote-as external
!
address-family ipv4 unicast
no neighbor 192.168.201.134 activate
neighbor 192.168.201.134 route-map NEXTHOP in
exit-address-family
The route-map map pointer for the incoming(or outgoing)
filter was not being saved due to a pre-mature optimization
of not handling the routemap callback if the peer is not
activated. The function that handles the peers route-maps
is making sure that the peer is in established state
before attempting to actually apply anything so just
call it to set the map pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
VARIABLE tokens must be all uppercase, this allows us to support WORD
tokens that begin with an uppercase letter. The "Null0" keyword is an
example of where this is needed.
The only VARIABLE we had that wasn't already all uppercase was
ASN:nn_or_IP-address:nn
