Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
1. Modified pim APIs name to generic one, same APIs would be used for PIMv4 and PIMv6
verifications
2. Modified all affacted scripts and ran multiple times locally to avoid CI failures
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
New compilers are noticing that the tests are compiling with
a pointer for the bgpd_privs variable while the bgp library
that is being linked against is not a pointer. Since
these tests had the declaration just to make the compiler
happy, let's actually align the variable type to make the
compiler even happier.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The test is testing whether interface flaps are causing
the appropriate pim reactions. Unfortunately the test
is turning off the multicast stream and the test also
has a keep alive timer of 15 seconds set on all routers.
Which of course means the test has 15 seconds(at most) to finish
testing. This is not always possible given system loads.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The test_multicast_pim_sm_topo3.py test is both spending extra time
looking for state that will never occurr but also generating a support
bundle when it doesn't find it. Fix the test to come to the correct
solution faster.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a test case where a kernel route depends on a kernel route
and when you perturb an interface, ensure that FRR does not
loose the route.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a test case to ensure that Kernel routes are not lost
when there are multiple overlapping connected routes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
a) Remove the retry mechanism to continue looking for 75%
of the time for pim code.
This alone saves a bunch of time in tests that use lib/pim.py
Effectively all the times given for retry are already long
enough. Additionally some tests are gathering data with
the expectation that they will not find data so the entire
time is being taken up in retry's. Extending the retry
mechanism makes this even worse. This is especially bad
for pim in that keep alive timers are counting down and
state can be removed due to excessive time waiting.
b) Reduce verify verify_multicast_traffic from 40 seconds
to 20 seconds to gather traffic data.
A bunch of tests are doing this:
a) gather pre test start traffic data( taking about 70
seconds to run, because a bunch of time it was looking
for data that does not exist yet)
b) run a change to introduce a different traffic flow
c) gather post test traffic data ( taking about 70
seconds to run )
Why does this matter? Tests were iterating through
all the different routers looking for traffic flow
as well as different mroute state. This is against
the keepalive timer of 210 seconds. It does not take
long before the stream can be removed and the test is
still looking for data that is no longer there due
to state timeout.
The multicast_pim_sm_topo3/test_multicast_pim_sm_topo3.py
test reduced run time from 398 seconds to 297 seconds.
Greatly reducing keepalive timeout problems.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
it wants yang models installed which will only be there if frr has been
installed before, causing `make check` to fail when run on a system on
which frr has not been installed when GRPC is enabled (--enable-grpc)
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
1. Handle KeyError
2. logger object is defined in main function and its not not accessible
in other functions so defined it in local functions.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Improving the test case to show database info as well
to help narrow down whether its a LSA origination problem or
route calculation problem in case of failures.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
RB-tree and double-linked-list easily support backwards iteration, and
an use case seems to have popped up. Let's make it accessible.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Do not allow the test system to turn off the logging of commands
Some tests use the reload command that is accidently turning off
the logging. Just force the tests to ignore it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Test ospf running with 3 vrfs: default, neno, ray
Route leaking is setup via bgp between default and neno vrfs
Leaked routes include connected and ospf
Included test:
1- OSPF convergnce
2- zebra/kernel routes
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
This PR adds support for configuring topotest routers using a single file.
instead of:
```
router.load_config(
TopoRouter.RD_ZEBRA, os.path.join(CWD, "{}/zebra.conf".format(rname))
)
router.load_config(
TopoRouter.RD_OSPF, os.path.join(CWD, "{}/ospfd.conf".format(rname))
)
router.load_config(
TopoRouter.RD_BGP, os.path.join(CWD, "{}/bgpd.conf".format(rname))
)
```
you can now do:
```
router.load_frr_config(
os.path.join(CWD, "{}/frr.conf".format(rname)),
[TopoRouter.RD_ZEBRA, TopoRouter.RD_OSPF, TopoRouter.RD_BGP]
)
```
or just:
```
router.load_frr_config(os.path.join(CWD, "{}/frr.conf".format(rname)))
```
In this latter case, the daemons list will be inferred from frr.conf file.
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
When running a topotest with the --shell or --vtysh argument, the
window titles of the routers are generic.
Set the router name as title to identify correctly the window.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Opening new tab in screen is not possible when using option --vtysh or
--shell. Error 'No such file or directory'.
Fix the issue.
Fixes: 6a5433ef0b ("tests: NEW micronet replacement for mininet")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
noticed that pylint was complaining about some easily
fixable stuff in test_route_map_topo1.py so let's clean
it up some.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Have added topotest to verify below combination.
Auth support for md5
Auth support for hmac-sha-256
Auth support with keychain for md5
Auth support with keychain for hmac-sha-256
Have sussessfully run all 4 test cases in my local setup.
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
isis_tlvs.c would fail at multiple places if incorrect TLVs were
received causing stream assertion violations.
This patch fixes the issues by adding missing length checks, missing
consumed length updates and handling malformed Segment Routing subTLVs.
Signed-off-by: Juraj Vijtiuk <juraj.vijtiuk@sartura.hr>
Small adjustments by Igor Ryzhov:
- fix incorrect replacement of srgb by srlb on lines 3052 and 3054
- add length check for ISIS_SUBTLV_ALGORITHM
- fix conflict in fuzzing data during rebase
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add new topotest for the Constraints ShortestPath First (CSPF) algorithm.
This topotest uses IS-IS-TE as base network to populate a Traffic Engineering
Database (TED) and sharpd to call cspf algorithms on this IS-IS-TE topology.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
When link-param is enabled for a given interface, TE metric is automatically
assigned to the metric of the interface. However, the metric of the interface
could be unassigned and keep the default value equal to 0. Thus, if the TE
metric is not explicitely modified within the `link-param metric` statement,
TE metric remains set to 0 which is not a valid value especially when
computing constrainted path.
This patch changes the assignement of the default value of the TE metric.
It is set to the metric of the interface only if the latter is not equal to 0.
TE topotests for OSPF and IS-IS have been adjusted accordingly.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Test the ability to use the following configure command with a Y value:
no neighbor X.X.X.X maximum-prefix-out Y
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Introduces a topotest to validate proper AS-Path manipulation when using
"neighbor ... remove-private-AS".
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Opaque data takes up a lot of memory when there are a lot of routes on
the box. Given that this is just a cosmetic info, I propose to disable
it by default to not shock people who start using FRR for the first time
or upgrades from an old version.
Fixes#10101.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
VRF name should not be printed in the config since 574445ec. The update
was done for NB config output but I missed it for regular vty output.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The current maximum-prefix-out topo-test starts a configuration with a
maximum-prefix-out.
Test the application of new maximum-prefix-out value without clearing
the neighbor.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Redistribution for ospf with instance id's using instance id's
was incorrect. Add some small tests to make sure it catches the
issues and we don't regress.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This just tries logging messages in random ways to allow the fuzzer to
do its thing and try to find weird edge cases.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The test case test_PIM_hello_tx_rx_p1 is failing randomly because
sometimes the hello packet is received and sometimes not received while getting
the stats data.
When the hello packet is received HelloRx gets incremented to 1 and then
shutdown of the interface is executed which resets the stats to 0
and again when "no shutdown" of the interface is done, the stats get incremented to 1.
The test case checks after "no shutdown" of the interface whether the stats is incremented
but in this case although the stats got incremented the before and after value is same.
Hence the test case failed.
Adding correct expectations in the test case.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Adding an `s` after these printfrr specifiers replaces 0.0.0.0 / :: in
the output with a star (`*`). This is primarily intended for use with
multicast, e.g. to print `(*,G)`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since this is only used in very few places, moving it out of the way is
reasonable. (`%pSG` will be pim_sgaddr)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The test is doing this:
a) gather interface data about packets sent
b) shut interface
c) no shut interface
d) gather interface data about packets sent
e) compare a to d and fail if packets sent/received has not incremented
The problem is, of course, that under heavy system load insufficient time
might not have passed for packets to be sent between c and d. Add up to
35 seconds of looking for packet data being incremented else heavily
loaded systems may never show that data is being sent.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
verify_pim_interface_traffic *fetches* the pim
traffic data. Rename the function to what it
actually does
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The nhrp_topo test sets up some infrastructure and
was displaying the commands it was outputting
incorrectly. Fix this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Using with LLGR, this should be allowed setting GR restart-time timer to 0,
to immediately start LLGR timers.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The following subcodes are defined for the Cease NOTIFICATION
message:
Subcode Symbolic Name
1 Maximum Number of Prefixes Reached
2 Administrative Shutdown
3 Peer De-configured
4 Administrative Reset
5 Connection Rejected
6 Other Configuration Change
7 Connection Collision Resolution
8 Out of Resources
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Currently, it is possible to rename the default VRF either by passing
`-o` option to zebra or by creating a file in `/var/run/netns` and
binding it to `/proc/self/ns/net`.
In both cases, only zebra knows about the rename and other daemons learn
about it only after they connect to zebra. This is a problem, because
daemons may read their config before they connect to zebra. To handle
this rename after the config is read, we have some special code in every
single daemon, which is not very bad but not desirable in my opinion.
But things are getting worse when we need to handle this in northbound
layer as we have to manually rewrite the config nodes. This approach is
already hacky, but still works as every daemon handles its own NB
structures. But it is completely incompatible with the central
management daemon architecture we are aiming for, as mgmtd doesn't even
have a connection with zebra to learn from it. And it shouldn't have it,
because operational state changes should never affect configuration.
To solve the problem and simplify the code, I propose to expand the `-o`
option to all daemons. By using the startup option, we let daemons know
about the rename before they read their configs so we don't need any
special code to deal with it. There's an easy way to pass the option to
all daemons by using `frr_global_options` variable.
Unfortunately, the second way of renaming by creating a file in
`/var/run/netns` is incompatible with the new mgmtd architecture.
Theoretically, we could force daemons to read their configs only after
they connect to zebra, but it means adding even more code to handle a
very specific use-case. And anyway this won't work for mgmtd as it
doesn't have a connection with zebra. So I had to remove this option.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently the Wait for Install code ( bgp_suppress_fib ) does
not properly handle two states from zebra: ROUTE_INSTALL_FAILED
and BETTER_ADMIN_DISTANCE_WON. Pre this change the WFI code
would just never notify our peers about a route install failure
but more is needed. In the ROUTE_INSTALL_FAILED and the
BETTER_ADMIN_DISTANCE_WON we need to notify our peers with
a withdrawal about the route, else we will continue to
draw traffic to us when we cannot legally do so.
Why is this needed? In either case imagine that we've already
received a bgp route, installed it and sent to our peers.
In the Better admin distance won case, say a static route is installed
at this point in time we must stop advertising the route through
us since we are not installed. As such a withdrawal must be sent.
In the ROUTE_INSTALL_FAILED case, the code was not properly handling
the situation where we have Route A, it was successfully installed
and then we received a update to Route A that was attempted to be
installed but failed. In this case we also need to send a withdrawal
Finally update the bgp_suppress_fib topotest to test both of these
situations.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There still existed chances that best path consideration
has not taken place for both bgp_l3vpn_to_bgp_vrf and
bgp_instance_del_test ( since they both used the same
check_routes.py scripting ). Add some more checks
to ensure that we have all the data. Prior to this
change I could see one of these two tests failing
every 2-3 runs on my test system. I am not seeing
this anymore after ~5 complete test runs.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
OSPF when converging will choose a DR / Backup DR based upon
who has already come up. Irrelevant of priority. As such if
under system load OSPF comes up first and elects a DR that under
normal circumstances not be the elected one due to priority
OSPF does not go back through and re-elect to keep the system
stable in this case. Tests are experiencing this:
unet> r0 show ip ospf neigh
Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL
100.1.1.1 99 Full/Backup 4m14s 3.780s 10.0.1.2 r0-s1-eth0:10.0.1.1 0 0 0
100.1.1.2 0 Full/DROther 4m14s 3.848s 10.0.1.3 r0-s1-eth0:10.0.1.1 0 0 0
100.1.1.3 0 Full/DROther 4m14s 3.912s 10.0.1.4 r0-s1-eth0:10.0.1.1 0 0 0
unet> r1 show ip ospf neigh
Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL
100.1.1.0 98 Full/DR 4m15s 3.011s 10.0.1.1 r1-s1-eth1:10.0.1.2 0 0 0
100.1.1.2 0 Full/DROther 4m19s 3.124s 10.0.1.3 r1-s1-eth1:10.0.1.2 0 0 0
100.1.1.3 0 Full/DROther 4m19s 3.188s 10.0.1.4 r1-s1-eth1:10.0.1.2 0 0 0
unet> r2 show ip ospf neigh
Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL
100.1.1.0 98 Full/DR 4m27s 3.483s 10.0.1.1 r2-s1-eth0:10.0.1.3 0 0 0
100.1.1.1 99 Full/Backup 4m32s 3.527s 10.0.1.2 r2-s1-eth0:10.0.1.3 0 0 0
100.1.1.3 0 2-Way/DROther 4m32s 3.660s 10.0.1.4 r2-s1-eth0:10.0.1.3 0 0 0
unet> r3 show ip ospf neigh
Neighbor ID Pri State Up Time Dead Time Address Interface RXmtL RqstL DBsmL
100.1.1.0 98 Full/DR 4m55s 3.786s 10.0.1.1 r3-s1-eth1:10.0.1.4 0 0 0
100.1.1.1 99 Full/Backup 4m55s 3.829s 10.0.1.2 r3-s1-eth1:10.0.1.4 0 0 0
100.1.1.2 0 2-Way/DROther 4m54s 3.897s 10.0.1.3 r3-s1-eth1:10.0.1.4 0 0 0
Modify the test to do a clear to enforce the order we are specifically looking for.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
