And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
... Oops ...
(for context, the defaults code originally didn't have a dedicated
"bool" variant and just used long for bools... I derp'd this when
adding bool as a separate case :( )
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@diac24.net>
Some preprocessor constants converted to enums to make the names usable
in the preprocessor.
v2: better isolation between core and vty code to make future northbound
conversion easier.
Signed-off-by: David Lamparter <equinox@diac24.net>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf pointer is used as reference when calling if_get_by_name() function.
this will permit to create interfaces with an unknown vrf_id, since it
is only necessary to get the vrf structure to store the interfaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The frr-interface YANG module models interfaces using a YANG list keyed
by the interface name and the interface VRF. Interfaces can't be keyed
only by their name since interface names might not be globally unique
when the netns VRF backend is in use. When using the VRF-Lite backend,
however, interface names *must* be globally unique. In this case, we need
to validate the uniqueness of interface names inside the appropriate
northbound callback since this constraint can't be expressed in the
YANG language. We must also ensure that only inactive interfaces can be
removed, among other things we need to validate in the northbound layer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Avoid duplicate ABR brouter entry and
its nexthops.
The route lookup results in first element of the
route/redix node. In case of Intra and inter area
brouter, the first element always intra brouter.
the first element comparison results in always addition
of new element for inter area brouter in brouter table.
Now, iterate all elements of the route node and compare
for brouter origin, if it is same simply update its
nexthops to FIB.
brouter and brouter route nexthops should be merge to avoid
duplicate nexthops for the inter area routes.
Ticket:CM-20807
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Store zebra router-id in global structure.
Before router ospf6 instance created,
zebra router-id callback called.
During ospf6 main execution zebra init happens,
but default instance does not execute until
cli replay 'router ospf6'.
Call ospf6_router_id_change during 'router ospf6'
to assign zebra router id to ospf6 instance.
Ticket:CM-19937
Testing Done:
Assign Loopback /32 (6.6.6.6/32) address,
restart frr with (router ospf6 in frr.conf).
ospf6 default instance assigned 6.6.6.6 router-id.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The route being added check its origin matches,
with any of the existing path (list of paths).
Remove the existing path, add if its cost is
eqaual or less than any of the existing path.
For a given route and of existing path cost is lower
(better) than one being added, discard new route update.
The existing path cost is higher (lower) than one being
added, ospf6_route_add replaces existing with new route
info.
Compare cost between delete request and with existing
route.
Ticket:CM-16139
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Notify user to store config and restart ospf6d
as part of router-id change cli if any of
the area active.
Store zebra router-id under ospf6, when static
router-id removed restore zebra router-id, ask
to restart ospf6d.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
RFC 2328 (14.1) Premature aging of LSAs from
routing domain :
When ospf6d is going away (router going down),
send MAXAGEd self originated LSAs to all
neighbors in routing domain to trigger
Premature aging to remove from resepective LSDBs.
Neighbor Router Reboot:
Upon receiving Self-originate MAXAGEd LSA, simply
discard, Current copy could be non maxaged latest.
For neighbor advertised LSA's (current copy in LSDB)
is set to MAXAGE but received new LSA with Non-MAXAGE
(with current age), discard the current MAXAGE LSA,
Send latest copy of LSA to neighbors and update the
LSDB with new LSA.
When a neighbor transition to FULL, trigger AS-External
LSAs update from external LSDB to new neighbor.
Testing:
R1 ---- DUT --- R5
| \
R2 R3
|
R4
Area 1: R5 and DUT
Area 0: DUT, R1, R2, R3
Area 2: R2 R4
Add IPv6 static routes at R5
Redistribute kernel routes at R5,
Validate routes at R4, redistributed via backbone
to area 2.
Stop n start frr.service at R5 and validated
MAXAGE LSAs then recent age LSAs in Database at DUT-R4.
Validated external routes installed DUT to R4.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Add hook for route-map update event.
Add a delay one shot timer to accomodate route-map
update and reset redist with zebra to process
all redistribute routes with route-map info.
Cleanup route-map, prefix cached date during ospf6 exit.
Ticket:CM-13800
Testing Done:
configure redistribute connected with route-map to define
type-2 routes. Restart frr.service and validated
route-map add,update event, thread is scheduled,
once timer is done redist reset with zebra.
Upon redist add notification, all route map info is cached
in ospf6 and processed as type-2 route and send ASE E2 LSA.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Handle RFC 2328 16.4 Calculating AS external routes with ECMP
For ASBR route, if it is learnt via new LSA and contains
different nexthop list. First lookup route in ospf6 route table
if it exists, merge nexthop list to existing and call the callback
to install into FIB (zebra). Delete created new route as it is
identical to existing entry in route table.
Ticket:CM-16139
Testing Done:
Run two ASBR with 2 ECMP paths from each
DUT neighbor receievs 4 ECMP path to a external route.
ospf6 installs all 4 ECMP path to FIB/RIB
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Make use of strnlen() and strlcpy() so we can get rid of these
convoluted if_*_by_name_len() functions.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If the user enters a decimal, display a decimal.
If the user enters a dotted quad, display a dotted quad.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
OSPF distance commands were broken in a variety of ways. Fix 'em.
* `distance ospf` and `distance ospf6` were accepted commands
* Inconsistent doc strings
* Make use of {keyword|tokens}
* Add ability to reset specific distance without specifying a value
Ex: ~# no distance ospf6 intra
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
These have copies in vtysh that do the node-switch locally and are
listed in extract.pl's ignore list. The ignore list however is
redundant since DEFUN_NOSH does the same thing...
ldpd is a bit hacky, but Renato is reworking this anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
VTY_DECLVAR_CONTEXT already contains a NULL check, vty warning message
and return statement. These are not needed.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These now generate warnings which will break the build with -Werror.
Note this may have enabled commands that should be disabled, or the
other way around...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Additionally:
* Add [ip] to a couple bgp show commands
* Quick refactor of a couple ISIS commands
* Quick refactor of a couple OSPF6 commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
vtysh's extract.pl script doesn't cope with install_element(var, ) where
"var" is not one of the FOO_NODE constants. Also, the future defun_lex
tool doesn't deal well with preprocessor expansions in the same regard.
This tries simplifying out some of these. lib/distribute.c needs
further thinking.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Until today the admin distance cannot be configured for any IPv6
routing protocol. This patch implements it for ospf6.
Signed-off-by: Maitane Zotes <maz@open.ch>
Signed-off-by: Roman Hoog Antink <rha@open.ch>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Prior to this change, interface bandwidth could not be defined above 10G. With
the use of higher speed interfaces, the ability to effectively define the path
links was highly impacted. Additionally, the default auto-cost reference-bandwidth
for ospf and ospfv3 was set to 100M, which relects a much earlier time. Changed both
the range of interface bandwidth definitions and reference bandwidths to be up to
100G. Set the default interface bandwidth (if not defined) to 10G to make the ratio
continue to cause a cost of 10 as before. Manual testing as well as ospf-min and
ospf-smoke passed successfully.
Ticket: CM-10756
Signed-of-by: Don Slice
Reviewed-by: Donald Sharp
Since we can't assume time_t to be long, int, or even long long, this
consistently uses %lld/long long (or %llu/unsigned long long in a few
cases) to print time_t/susecond_t values. This should fix a bunch of
warnings, on NetBSD in particular.
(Unfortunately, there seems to be no "PRId64" style printing macro for
time_t...)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit ef008d2f8dc8f7160d8a3d24a15f2fad79ef3242)
SYMPTOM:
If some of the ospfv3 commands like 'show ipv6 ospf6 route' are executed
with ospf6d daemon running but before having any ospfv3 configuration, then
ospf6d crash is seen.
ISSUE:
There are a few show commands, which are (unlike others) not checking if
ospf6 instance is initialized already.
FIX:
Add the missing checks, by using OSPF6_CMD_CHECK_RUNNING() in the commands
where its needed and not yet used.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Pradosh Mohapatra <pmohapat@cumulusnetworks.com>
Dinesh Dutt <ddutt@cumulusnetworks.com>
OSPFv3: Add ABR support and make ECMP > 4.
Signed-off-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Signed-off-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com>
This command allows the user to change to default reference bandwidth
for cost calculations. The default value is 100 Mbps. With a default
bandwidth of 10 MBps, the default cost becomes 10. Those values are
consistent with OSPFv2.
[DL: resolved conflicts in vty command additions & docs]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Improve the _disable/_enable infrastructure so it gets into
a more usable shape and make 'no router ospf6' actually work.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com>
[DL: adapted to rebase / readded randomly lost line]
[DL: killed timeval_subtract]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Similar to OSPFv2, add support for 'log-adjacency-changes [detail]' to log
changes in adjacency state of ospfv3 neighbors.
Signed-off-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com>
Reviewed-by: Shrijeet Mukherjee <shm at cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
OSPFv3: Support setting/clearing overload bit on router
It is sometimes necessary for a router to gracefully remove itself from
the SPF tree i.e. it cannot act as a transit router. It does this by
setting the overload bit in the router LSA. This patch adds support for
enabling/disabling the overload bit.
Signed-off-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Reviewed-by: Pradosh Mohapatra <pmohapat at cumulusnetworks.com>
[DL: patch applied with fuzz]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
MaxAge LSAs are being flushed out only on an event, unlike OSPFv2 where they're flushed out
periodically. This causes certain LSAs to hang around forever, never getting flushed out.
This patch makes flushing out MaxAge LSAs periodic, retriggered after a certain period if
not all MaxAge LSAs were flushed out.
Signed-off-by: Dinesh G Dutt <ddutt at cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
OSPV3 SPF triggers on every SPF-able event instead of using timers the way
OSPFv2 does. This patch makes SPF be triggered/throttled similar to OSPFv2.
It adds a command to quagga identical to the OSPFv2 equivalent to configure
these timers.
Summary:
Signed-off-by: Dinesh Dutt <ddutt at cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma at cumulusnetworks.com>
[DL: removed reference to oa->ts_spf for rebase]
[DL: killed timeval_subtract]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
A clean exit makes it easier to use memory debuggers.
* ospf6_asbr.c: (ospf6_asbr_terminate) Add a function to do route map
cleanup.
* ospf6_lsa.c: (ospf6_lsa_terminate) Add a function to cleanup the lsa
handler vector.
* ospf6_main.c: (ospf6_exit) Add an function that causes ospf6d to
gracefully exit.
* ospf6_message.c: (ospf6_message_terminate) Add a function that frees
the send and receive buffers.
* ospf6_top.c: (ospf6_delete) Enable the ospf6_delete() function.
Disable ospf6 before freeing everything.
ospf6d will crash if attempting to remove interface when no areas have been
defined Check if any areas have been defined. Should prevent use of empty
pointer.
Suggestion: Makes no sense to me that the statement to remove ospf6
configuration is located in OSPF6D_NODE.
Moved to CONFIG_NODE next to matching define command.
2008-08-15 Paul Jakma <paul.jakma@sun.com>
* {ospf6d,ripngd}/*: Finish job of marking functions as static, or
exporting declarations for them, to quell warning noise with
Quagga's GCC default high-level of warning flags. Thus allowing
remaining, more useful warnings to be more easily seen.
2005-10-06 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
* ospf6_asbr.c: fix bug of calculating AS-External routes
in other areas. Add debugging function for border-router
calculation.
* ospf6d.h: version 0.9.7p
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
