do not add a new route type, and consider 0 as a value meaning
that zebra should be the owner.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zapi_nbr structure is renamed to zapi_neigh_ip.
Initially used to set a neighbor ip entry for gre interfaces, this
structure is used to get events from the zebra layer to nhrp layer.
The ndm state has been added, as it is needed on both sides.
The zebra dplane layer is slightly modified.
Also, to clarify what ZEBRA_NEIGH_ADD/DEL means, a rename is done:
it is called now ZEBRA_NEIGH_IP_ADD/DEL, and it signified that this
zapi interface permits to set link operations by associating ip
addresses to link addresses.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Instead of directly configuring the neighbor table after read from zapi
interface, a zebra dplane context is prepared to host the interface and
the family where the neighbor table is updated. Also, some other fields
are hosted: app_probes, ucast_probes, and mcast_probes. More information
on those fields can be found on ip-ntable configuration.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
EVPN neighbor operations were already done in the zebra dataplane
framework. Now that NHRP is able to use zebra to perform neighbor IP
operations (by programming link IP operations), handle this operation
under dataplane framework:
- assign two new operations NEIGH_IP_INSTALL and NEIGH_IP_DELETE; this
is reserved for GRE like interfaces:
example: ip neigh add A.B.C.D lladdr E.F.G.H
- use 'struct ipaddr' to store and encode the link ip address
- reuse dplane_neigh_info, and create an union with mac address
- reuse the protocol type and use it for neighbor operations; this
permits to store the daemon originating this neighbor operation.
a new route type is created: ZEBRA_ROUTE_NEIGH.
- the netlink level functions will handle a pointer, and a type; the
type indicates the family of the pointer: AF_INET or AF_INET6 if the
link type is an ip address, mac address otherwise.
- to keep backward compatibility with old queries, as no extension was
done, an option NEIGH_NO_EXTENSION has been put in place
- also, 2 new state flags are used: NUD_PERMANENT and NUD_FAILED.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
neighbor table api in zebra is added. a netlink api is created for that.
the handler is called from the api defined in the previous commit.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When netlink_neigh_update() is called, the link registration was
failing, due to bad request length.
Also, the query was failing if NDA_DST was an ipv6 address.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
a zebra api is extended to offer ability to add or remove neighbor
entry from daemon. Also this extension makes possible to add neigh
entry, not only between IPs and macs, but also between IPs and NBMA IPs.
This API supports configuring ipv6/ipv4 entries with ipv4/ipv6 lladdr.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zebra implements zebra api for configuring link layer information. that
can be an arp entry (for ipv4) or ipv6 neighbor discovery entry. This
can also be an ipv4/ipv6 entry associated to an underlay ipv4 address,
as it is used in gre point to multipoint interfaces.
this api will also be used as monitoring. an hash list is instantiated
into zebra (this is the vrf bitmap). each client interested in those entries
in a specific vrf, will listen for following messages: entries added, removed,
or who-has messages.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This one also needed a bit of shuffling around, but MTYPE_RE is the only
one left used across file boundaries now.
Signed-off-by: David Lamparter <equinox@diac24.net>
This is causing problems with VM move i.e. transition from remote
neigh to local neigh. This transition involves changing the NUD_STATE
NUD_NOARP to NUD_STALE. And the weak override flag prevents changing
the state from connected (REACHABLE, NOARP, PERMANENT) to STALE.
PS: Weak-override was originally used to prevent race conditions where
FRR can end up making a REACHABLE neigh STALE. We may need to revisit
and address that case at a later point.
Ticket: CM-30273
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When looking up the conversion from kernel protocol to
internal protocol family make sure we use the correct
AF_INET( what the kernel uses ) instead of AFI_IP (which
is what FRR uses ).
Routes from OSPF will show up from the kernel as OSPF6 instead of
OSPF. Which will cause mayhem
Ticket: CM-33306
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
When dplane_fpm_nl is used the "Please add this protocol(n) to proper
rt_netlink.c handling" debug message is emitted for any route of type
kernel or connected.
This severely reduces performance of dplane_fpm_nl when large numbers
of these routes are present in the RIB.
The messages are not observed when using the original fpm module since
this uses a custom function, netlink_proto_from_route_type().
zebra2proto() now returns RTPROT_KERNEL for ZEBRA_ROUTE_CONNECT and
ZEBRA_ROUTE_KERNEL. This should only impact dplane_fpm_nl's use of
the common netlink routines since these routes generally ignored via
checking of RSYSTEM_ROUTE().
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
If a netlink/dp notification is rxed for a neigh without the peer-sync
flag FRR re-installs the entry with the right flags. This change is
needed to handle cases where the dataplane and FRR may fall out of
sync because of neigh learning on the network ports (i.e. via
the VxLAN).
Ticket: CM-30693
The problem was found during VM mobility "torture" tests where 100s
of extended VM moves were done.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
With EVPN-MH, Type-2 routes are also used for MAC-IP syncing between
ES peers so a change was done to only treat REACHABLE local neigh
entries as local-active and advertise them as Type-2 routes i.e. STALE
neigh entries are no longer advertised as Type-2s.
This however exposed some unexpected problems with MLAG where a
secondary reboot followed by a primary reboot left a lot of neighs
in STALE state (on the primary) resulting in them not being
advertised. And remote routed traffic to those hosts being
blackholed in a sym-IRB setup.
This commit is a workaround to fix the regression (it doesn't fix
the underlying problems with entries not becoming REACHABLE; which
maybe a day-1 problem). The workaround is to continue advertising
STALE neighbors if EVPN-MH is not enabled.
Ticket: CM-30303
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Use the new nested NDA_FDB_EXT_ATTRS attribute to control per-fdb
notifications.
PS: The attributes where updated as a part of the kernel upstreaming
hence the change.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When a local ES flaps there are two modes in which the local
MACs are failed over -
1. Fast failover - A backup NHG (ES-peer group) is programmed in the
dataplane per-access port. When a local ES flaps the MAC entries
are left unaltered i.e. pointing to the down access port. And the
dataplane redirects traffic destined to the oper-down access port
via the backup NHG.
2. Slow failover - This mode needs to be turned on to allow dataplanes
not capable of re-directing traffic. In this mode local MAC entries
on a down local ES are re-programmed to point to the ES-peers'
NHG. And vice-versa i.e. when the ES comes up the MAC entries
are re-programmed with the access port as dest.
Fast failover is on by default. Slow failover can be enabled via the
following config -
evpn mh redirect-off
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
NHG and DST (VTEP-IP) are mutually exclusive attributes. If DST is
present the kernel ignores NHG.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Add a command that allows FRR to know it's being used with
an underlying asic offload, from the linux kernel perspective.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The linux kernel is getting RTM_F_OFFLOAD_FAILED for kernel routes
that have failed to offload. Write the code
to receive these notifications from the linux kernel
and store that data for display about the routes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(ndm_state & NUD_NOARP) - prevents the entry from expiring
(ndm_flags & NTF_STICKY) - prevents station moves on the entry
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When we get a route for installation via any method we should
consolidate on 32 bits as the flag size, since we have
actually more than 8 bits of data to bass around.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add some logging for when we choose to ignore a NHG install
for one reason or another. Also, cleanup some of the code
using the same accessor functions for the context object.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Determine the NHG ID spacing and lower bound with ZEBRA_ROUTE_MAX
in macros.
Directly set the upperbound to be the lower 28bits of the uint32_t ID
space (the top 4 are reserved for l2-NHGs). Round that number down
a bit to make it more even.
Convert all former lower_bound calls to just use the macro.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a command/functionality to only install proto-based nexthops.
That is nexthops owned/created by upper level protocols, not ones
implicitly created by zebra.
There are some scenarios where you would not want zebra to be
arbitrarily installing nexthop groups and but you still want
to use ones you have control over via lib/nexthop_group config
and an upper level protocol.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The linux kernel is getting RTM_F_TRAP and RTM_F_OFFLOAD for
kernel routes that have an underlying asic offload. Write the
code to receive these notifications from the linux kernel and
to store that data for display about the routes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Changes to setup peer-synced as static in the dataplane. This prevents
them from being flushed out when the local switch cannot establish
their reachability.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Imagine a situation where a interface is bouncing up/down.
The interface comes up and daemons like pbr will get a nht
tracking callback for a connected interface up and will install
the routes down to zebra. At this same time the interface can
go down. But since zebra is busy handling route changes ( from pbr )
it has not read the netlink message and can get into a situation
where the route resolves properly and then we attempt to install
it into the kernel( which is rejected ). If the interface
bounces back up fast at this point, the down then up netlink
message will be read and create two route entries off the connected
route node. Zebra will then enqueue both route entries for future processing.
After this processing happens the down/up is collapsed into an up
and nexthop tracking sees no changes and does not inform any upper
level protocol( in this case pbr ) that nexthop tracking has changed.
So pbr still believes the nexthops are good but the routes are not
installed since pbr has taken no action.
Fix this by immediately running rnh when we signal a connected
route entry is scheduled for removal. This should cause
upper level protocols to get a rnh notification for the small
amount of time that the connected route was bouncing around like
a madman.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We can make the Linux kernel send an ARP/NDP request by adding
a neighbour with the 'NUD_INCOMPLETE' state and the 'NTF_USE' flag.
This commit adds new dataplane operation as well as new zapi message
to allow other daemons send ARP/NDP requests.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
For the sake of Segment Routing (SR) and Traffic Engineering (TE)
Policies there's a need for additional infrastructure within zebra.
The infrastructure in this PR is supposed to manage such policies
in terms of installing binding SIDs and LSPs. Also it is capable of
managing MPLS labels using the label manager, keeping track of
nexthops (for resolving labels) and notifying interested parties about
changes of a policy/LSP state. Further it enables a route map mechanism
for BGP and SR-TE colors such that learned BGP routes can be mapped
onto SR-TE Policies.
This PR does not introduce any usable features by now, it is just
infrastructure for other upcoming PRs which will introduce 'pathd',
a new SR-TE daemon.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
